﻿# SDBOX — AI Knowledge Manual (English)

**SDBOX_AI_Help_EN.md · English edition · 15 October 2026**

**Official resources:** [SDBOX](https://www.sdbox.gr/index-eng.html) · [SDBOX Manual Portal](https://www.sdtopocad.net/?lang=en) · [Survey command reference](https://www.sdtopocad.net/index.files/TOPOGRAFIA_EN.htm)

This portable Markdown reference is designed for use with ChatGPT, Claude, Gemini and other assistants. It provides an English-language working guide, actual SDBOX command names, typical workflows, troubleshooting, and direct links to the corresponding official English help articles. It is a reference, not an executable CAD program or a substitute for engineering checks.

**Source transparency:** Chapters 1–15 and 17–21 are restored editorial guidance, not verbatim extracts from the English documentation. Their individual instructions have not all been independently verified against the original English help or PDF pages. Confirm procedures, command prompts and release-specific availability against the English source links before relying on them. The detailed MNU descriptions, English HTML article extracts and current English Ribbon entries later in this file remain separately attributed to their source documents.

## How to use this file

1. Attach `SDBOX_AI_Help_EN.md` to an AI conversation and ask questions about using SDBOX. You may also provide the public URL `https://www.sdtopocad.net/SDBOX_AI_Help_EN.md` once the file has been uploaded there.
2. Ask for an action, not just a command name: *"How do I import survey points from a TXT file?"*, *"How do I calculate an area and write its coordinate table?"*, or *"How do I make a terrain model from elevation points?"*
3. When a detailed procedural or visual explanation is required, open the referenced official help article. The original articles include dialogs, examples, screenshots and command prompts.
4. Where this file or the online help does not explain a behavior, ask for the CAD version and SDBOX edition. Do not assume a feature or a particular dialog exists in every release.

**Note for AI assistants:** Read this section first. Command names (`ITAX`, `ZLL`, `ZZB`, etc.) are actual command identifiers and remain the same in Greek and English installations. Only descriptions, interface labels and help pages differ by language. Never invent a command, file path, layer, setting, parameter or legal requirement. Prefer an explicit **command → prerequisites → steps → checks → English source** answer, and distinguish native CAD commands from SDBOX-specific commands. In drawing terminology, use **layer**, not “level”. If the linked article is unavailable, state the uncertainty rather than improvising undocumented steps.

---

## 1. What SDBOX is

SDBOX extends AutoCAD-compatible CAD platforms with tools for surveying, architectural documentation and day-to-day drafting. It is used from the host CAD environment rather than replacing it. Function families include survey-point handling, survey-plan production, raster and geospatial backgrounds, blocks, texts, dimensions, layers, triangulated terrain models, contour lines, floor plans, sections, elevations, title blocks, legends, data exchange and outputs. Supported environments include AutoCAD, BricsCAD, progeCAD, GstarCAD and ZWCAD, subject to the applicable product version and licensed features.

Run a documented SDBOX command from its Ribbon/menu item or type its code at the host CAD command line. Be aware of current drawing units, scale, coordinate reference system, active layer, UCS, block attributes, plot layout, and the drawing's host CAD version. Do not assume that a command automatically converts coordinate systems unless its help explicitly states so.

English overview: https://www.sdtopocad.net/index.files/WHAT_IS_SDBOX_EN.htm  
Manual Portal: https://www.sdtopocad.net/?lang=en  
English product site: https://www.sdbox.gr/index-eng.html

## 2. Basic survey drawing workflow

**A typical sequence (adapt to the job):**

1. Set the drawing's survey conventions with `TOPOUNITS`; check linear/angular units, precision and the coordinates to be used. Use the scale tools to establish the correct intended plot scale before inserting scale-dependent symbols or annotations.
2. Prepare a delimited coordinate file and import points with `ITAX`. Verify which fields are point codes, Easting/X, Northing/Y and optional elevation/Z; check the intended block types and attribute assignments.
3. If the points must be referenced by typing their identifiers, use `DMLL` to confirm the point-recognition blocks and attributes. Enable `3DLL` when an elevation warning matters to the operation.
4. Produce existing-condition linework using `ZLL`, supplemented by point-based construction tools such as `MR2`, `MR3`, `MSP`, `MK3`, `MKK`, `MJL` or `MOF`, as appropriate.
5. Mark building outlines and relevant planning annotations; use `PHKT` for a point-defined open building indication or `HKT` for a closed outline.
6. Document parcel geometry with `ZID` or `ZIDS`; create coordinate tables using the appropriate `ZPID`, `ZPPOL`, `ZPRP`, `ZPTR` or `ZPBL` variant.
7. Add grid lines and coordinate labels with `KNB`, `KNBS` and `KNBT`. Insert selected title content with `ZTITLOI` and select suitable legends.
8. Export the required coordinates via `ZXID`, `ZXPOL`, `ZXTAX`, `ZXREP` or `ZXTRI`, then review dimensions, areas, coordinate system, north arrow, scale and sheet output before delivery.

**Important:** `ITAX` imports coordinate data; `ZZB` is a different command that can draw point blocks while optionally recording the points selected interactively. Use the command that matches your input data.

English survey command reference: https://www.sdtopocad.net/index.files/TOPOGRAFIA_EN.htm  
Survey-plan illustrated PDF (21 pages): https://www.sdtopocad.net/sdbox_TOPO_EN.pdf

### Importing points from TXT — `ITAX`

Prepare one record per point using a known separator and consistent columns. Confirm whether a field is a point code, X, Y, Z or another attribute and whether the coordinate reference system matches the drawing. Execute `ITAX`, select the file, select/configure the appropriate file layout and point block, then verify several imported locations and labels. **Preserve the original coordinate values**; do not round, swap axes, apply offsets or infer elevations from missing fields. Source: https://www.sdtopocad.net/index.files/TOPOGRAFIA_EN.htm

### Defining and checking an area — `ZID` / `ZIDS`

Use `ZID` for an existing closed boundary/polyline or an internal point in a closed area. Use `ZIDS` where the perimeter must be supplied point by point. The workflow annotates vertices and sides and inserts the calculated area. Verify that the selected loop is the intended parcel and that no overlaps, gaps or self-intersections invalidate its result. Source: https://www.sdtopocad.net/index.files/TOPOGRAFIA_EN.htm

### Preparing coordinate tables and exports

The five table variants allow independent suggested block/attribute and table settings; select the one appropriate to the points being documented. For exports, choose `ZXID` (property vertices), `ZXPOL` (polygon vertices), `ZXTAX` (survey points), `ZXREP` (control/benchmark points) or `ZXTRI` (survey control points). Confirm delimiter, column order, decimal precision and any elevation field with a small sample before delivering to a field instrument or third party.

## 3. Terrain modelling: TIN / DTM / contour lines

Terrain modelling should begin with points that have verified elevation values and a consistent vertical datum. Define which elevation blocks are included (`ZDTS`) and the triangulation area. For an open area use `ZDTMA`, and for triangulation restricted to a closed boundary use `ZDTM`. Construct individual triangles with `ZTIN` and incorporate breaklines by rebuilding with `ZDTMB` where needed. Inspect the result (`TTG`, `TTGR`, `TTH`, `TTHR`); correct bad local triangles (`TTR`, `TTD`) and investigate missing ones (`TTNO`). Export triangles where required with `ZXTIN`.

A triangulation is an *interpolated surface*, not proof that the survey point elevations or breaklines are correct. Verify ridge lines, crests, drainage paths, sudden steps, exclusions, outside-boundary triangles and unusual long edges. Consider the host CAD implementation when interpreting 3D elevations.

For contours, the usual workflow is a temporary contour calculation/preview (`IIJ`), quick refreshed preview (`IIJK`), recalculation with new triangles/spacing (`IIJR`), then final contours (`ZDTMISO`). The contour interval must suit the project and drawing scale. These contour commands are cross-referenced in the English TIN article; confirm the exact contour interface in the installed release.

English DTM guide: https://www.sdtopocad.net/index.files/Page14280_EN.htm

## 4. Raster images and georeferencing

Use `ZIMIN` to insert and organize raster backgrounds; it can help distinguish adjustment images from excerpt images through layer conventions. For an image with an accompanying world file, use `ZIMGEO` to insert it with its stored placement, scale and orientation, or `ZIMGS` to reposition an already inserted image using that information. `ZIMDD` fits a selected image/geometry by entering the true lengths of successive sides, while `ZIMAA` transfers selected drawing objects between differently positioned/scaled images.

A **world file** provides image-to-coordinate positioning, but does not by itself establish the source CRS. Confirm that the image and CAD drawing use compatible systems and that any coordinate transformation has been applied correctly. For transferring deliverables between workstations, `ZCCIM` copies linked images into a chosen folder; `ZCIMD` changes image search paths; `ZFIM` isolates image visibility; `ZIMNM` labels image names.

English image command guide: https://www.sdtopocad.net/index.files/IMAGES_EN.htm

## 5. Managing layers and external references

For visual isolation, `ZF` freezes every layer except selected layers, and `ZFF` thaws layers. `ZFG` greys other layers without deleting their data; `ZFGG` restores their colors. Use `SDD` for configured layer visibility lists. For operations rather than visibility, `CTOLAY` copies objects to a target layer, `ZONELAY` moves selected objects onto one layer, `ZLAYREN` renames layers and `ZLAYLIST` lists drawing layer names. Related `XDD` and `XDDA` commands address Xref layer/display behavior.

**Caution:** A frozen layer has not been erased. Layer changes may affect plotting and dependent commands, while an Xref has separate display/attachment conditions. Verify before concluding information has disappeared.

English layer guide: https://www.sdtopocad.net/index.files/LAYERS_EN.htm

## 6. Blocks, point symbols, attributes and libraries

`ASD` inserts fixed-size symbol blocks. `MBL` inserts library blocks scaled according to print scale. `ASDA` and `MBLA` let the user choose the block from another directory. Folder/library helpers are `ASDCHDIR`, `ASDDIR`, `ASDADIR`, `MBLCHDIR`, `MBLDIR` and `MBLADIR`. Block utilities include `ZZB` (sequential insertion with optional export), `NNAR` (number in a circle), `ZBOR` (north arrow), `ZBLK` (block/Xref counts), `ZZATT` (attribute editing), `ZZTAG` (attribute-tag change), `ZMSB` (block-scale matching), `ZXBL` (block export) and `ZYPBL` (symbol legend).

Symbol libraries can be customized with DWG symbols and preview slides. For any project delivered to someone else, ensure custom external resources and block definitions can still be found. Attributes are distinct from free-standing text: select the appropriate command for the object type.

English blocks guide: https://www.sdtopocad.net/index.files/GIA_BLOCKS_EN.htm

### Drawing and exporting points together — `ZZB` / XYZOUT

`ZZB` supports interactive point marking with sequential or custom codes, configurable block/text output, and optional coordinate-file export. A typical exported line can be `CODE,X,Y` or `CODE,X,Y,Z`, with user-selected separators and fields. When export is active, finish the session with **Enter/right-click instead of Esc** as described in the guide, so the file is finalized. Validate the required format against the total station, GNSS controller or exchange specification.

English guide: https://www.sdtopocad.net/index.files/XYZOUT_EN.htm

## 7. Dimensions, text and annotations

SDBOX provides both host-CAD dimensions and enhanced dimensioning commands. `ZDDAS` selects dimension options; `ZDA`, `ZDAM`, `ZDL`, `ZDLM`, `ZDOV` are linear-dimension variants. `ZDW` calculates the angle between three points; `ZDWA` reports an azimuth. There are dedicated radius (`ZDRAD`), diameter (`ZDDIAM`), arc-length (`ZDARC`) and consistency-check (`ZCDIM`) tools. Dimensions with overridden display text are not evidence of actual geometry; investigate such exceptions before delivery.

Text commands cover text alignment (`ETT`), continuation below (`STT`), line spacing (`KTT`), blank text cleanup (`TT0`), import from text files (`F2T`), export (`T2F`), conversion (`TTMT`) and text editing (`TTT`). Use `DDE` for supported text and block-attribute edits, and `ZYPTT` for a text-type legend.

English dimensions: https://www.sdtopocad.net/index.files/DIASTASEIS_EN.htm  
English texts: https://www.sdtopocad.net/index.files/GIA_KEIMENA_EN.htm

## 8. Calculations on CAD objects and numeric text

`ZNM` performs arithmetic operations on numeric TEXT values. `ZNMB` applies numeric operations to block attributes. `D+D` uses typed numbers and measured distances. The command family `L+L`, `P+P`, `A+A`, `T+T`, `S+S`, `O+O`, `LPATS` operates on length/dimension/text data of selected object types, and `E+E` processes geometric areas. `KL` calculates slopes, while `ZAA` and `ZAAS` support area calculations.

For a bulk change, back up the drawing and select the correct attributes/texts with filters. Check units, precision, negative values and nonnumeric entries after processing. A visible number may have been overridden manually and may not be a reliable geometric measurement.

English calculations: https://www.sdtopocad.net/index.files/GIA_ARITHMOYS_EN.htm

## 9. Hatches and explanatory legends

`ZHH` displays organized hatch choices and inserts a selected pattern scaled for the current print scale. `HH0`–`HH4` are shortcuts to solid grey tones. `ZYPHH` creates a hatch legend with category information; `ZHHLIST` lists hatch patterns in the drawing; `ZHHLS` exports more detailed hatch properties. Description-list selection/editing is handled by `ZYPHH1`, `ZYPHH2` and `ZVFE` where appropriate.

Other legends include `ZYPGR` (line types), `ZYPBL` (blocks), `ZYPTT` (text) and `ZYPLAY` (layers). If two categories look identical but are separated, compare scale, color, linetype or other underlying properties before editing them.

English hatches: https://www.sdtopocad.net/index.files/HATCH_EN.htm  
English legends/titles: https://www.sdtopocad.net/index.files/YPOMNHMATA_EN.htm

## 10. Floor plans

Floor-plan drafting includes configured layers, dimensioning, columns/beams, openings, opening tags, level marks, and section callouts. `ZKKP` selects an opening-tag type, `ZZDK` documents column/pillar/beam dimensions, `SPARS` supports window drafting and `SPOS` door drafting. `YPPP` creates a door/window legend. `PARATH` and `PORTA` insert relevant opening symbols; `ZST` adds levels/height marks;  adds a section indicator; `MTM` addresses small sections.

As these commands may produce scale-aware blocks, establish the intended plot scale first. Verify how an opening is measured, its orientation, sill/lintel heights and its relationship to wall geometry. For nonstandard openings consult the illustrated guide rather than forcing a generic template.

English floor-plan reference: https://www.sdtopocad.net/index.files/KATOPSEIS_EN.htm  
Illustrated floor-plan PDF (17 pages): https://www.sdtopocad.net/sdbox_FLOOR-PLAN_EN.pdf

## 11. Building sections and elevations

Sections and elevations can be drafted in relation to a floor plan/Xref. `GGY` draws multiple lines at a common Y; `GGX` similarly uses a common X; `GRY0` creates a zero-level reference line, and `GG1` helps raise projected lines. `GRPO` supports slab/floor depiction. `TST` inserts levels, `TSTGR` adds levels with a line, and `CCTST` checks level annotations. `TTXX` uses text from an Xref, while `XDDA` changes the Xref selection. `OPSPAR` supports window/opening representation in sections/elevations.

A projected line or level annotation is not a substitute for checking the actual building elevations: verify the zero datum, floor-to-floor heights, slab depths, direction of view, Xref alignment and dimension labels.

English sections/elevations reference: https://www.sdtopocad.net/index.files/TOMES_OPSEIS_EN.htm  
Section PDF (16 pages): https://www.sdtopocad.net/sdbox_SECTION_EN.pdf  
Elevation PDF (15 pages): https://www.sdtopocad.net/sdbox_ELEV_EN.pdf

### Floor and height markers — `ZST`

`ZST` selects level/height markers from a symbol library, with configurable value types, calculation operations and print-scale-aware size. It can reuse the most recent value of a category. Related helpers include `ZSTA` for inserting a marker block, `ZST1` for symbol descriptions and `ZSTLIST` for browsing symbols. Attribute fields such as `+STATHMI` are level values; `IPSOS` fields correspond to heights. Check whether the notation represents an absolute level or a difference in height.

English level marker guide: https://www.sdtopocad.net/index.files/ZST_EN.htm

## 12. Titles, project data and sheets

Use `ZTITLOI` to select and insert a title block from a library, `ZZBASE` for project/drawing information, and `TCDS` for title field codes. Directory helpers include `TITLOICHDIR` and `ERGACHDIR`. `YYTT` provides note/header tools. A prepared title block still needs review for the correct project, drawing number, date, revision and signatory. The output sheet should be checked at its intended plot scale, and a test PDF should be inspected before delivery.

English titles and legends: https://www.sdtopocad.net/index.files/YPOMNHMATA_EN.htm  
English plot-scale guide: https://www.sdtopocad.net/index.files/KLIMAKA_EN.htm

## 13. Photo-location plans

`PH` places a numbered photo-position/direction marker in a CAD drawing. Choose its printed symbol size, location and viewing direction. `PHLIST` counts symbols, `PHSTI1` and `PHSTI2` support photo captions/title material, and `PHKLIM` sets photo scale. `FFCHDIR` sets the photo folder, `ZDFFC` opens it, and `DFF` opens a photo. Keep photo numbers synchronized with actual photos delivered.

English photo-plan guide: https://www.sdtopocad.net/index.files/PHOTOS_EN.htm

## 14. Modify, inspect and select geometry

Use selection filters when a command must affect objects with specific properties. `ZZS`, `ZZSP` and `ZZSS` are selection/overview helpers. For transformations, `ZMRS` calculates average adjustment from source/target point pairs and can combine selected translation/rotation/scale options; avoid scaling survey coordinates unless the transformation is intended. `ZDFS` and `ZDFA` relate to drawing/print-scale and real-dimension handling. `ZCH` modifies object properties, `ZMM` moves, `ZCC` copies, `ZRR` rotates, `ZCS` scales from a block insertion point, `ZZ0` flattens selected Z values and `ZEE` erases filtered objects.

Always distinguish a drawing **visual adjustment** from a **coordinate-system transformation**: they are not equivalent and must be validated independently.

English modify tools: https://www.sdtopocad.net/index.files/MODIFY_EN.htm  
English selection filters: https://www.sdtopocad.net/index.files/EPILOGH_ANT_ME_FILTRA_EN.htm

## 15. Maps, background data and file exchange

Use the SDBOX maps tools for base maps, georeferenced image inserts, Google Earth workflows and geospatial exchange. CAD drawings and GPS/geospatial files may use different coordinate reference systems; verify EPSG codes, axis direction, linear units and transformation method. Treat background map displays as reference information unless their data source and accuracy support the intended engineering use.

English maps overview: https://www.sdtopocad.net/index.files/MAPS_SDBOX_EN.htm  
English auxiliary file/Google Earth tasks: https://www.sdtopocad.net/index.files/DIAFORA_EN.htm

## 17. Worked questions and reliable responses

**Q: How do I import coordinate points from a TXT file?**  
**A:** `ITAX`. Confirm the TXT record layout and point attributes, import from the coordinate file and check X/Y/Z positions. [Survey commands](https://www.sdtopocad.net/index.files/TOPOGRAFIA_EN.htm).

**Q: How do I draw using existing point codes rather than snapping to every point?**  
**A:** Configure point recognition with `DMLL`, then use an appropriate drawing command such as `ZLL`. Check which block and attribute store the code. [Survey commands](https://www.sdtopocad.net/index.files/TOPOGRAFIA_EN.htm).

**Q: I have points and elevations. How can I build a terrain surface?**  
**A:** Check Z values, select participating points with `ZDTS` and triangulate with `ZDTMA` or `ZDTM`; use `ZDTMB` for breaklines. Inspect and edit problematic triangles. [DTM guide](https://www.sdtopocad.net/index.files/Page14280_EN.htm).

**Q: I need a coordinate table for my property vertices.**  
**A:** Define or select the correct property boundary, then use the appropriate coordinate-table variant (commonly `ZPID` for property vertices). [Survey commands](https://www.sdtopocad.net/index.files/TOPOGRAFIA_EN.htm).

**Q: How can I hide everything except the layers I'm working on?**  
**A:** `ZF` freezes other layers; `ZFF` thaws layers again. Alternatively `ZFG`/`ZFGG` provides a greyed-out display. [Layer guide](https://www.sdtopocad.net/index.files/LAYERS_EN.htm).

**Q: Do I use ASD or MBL for a symbol?**  
**A:** `ASD` preserves the designed dimensions; `MBL` is adjusted for the drawing's plot scale. [Blocks guide](https://www.sdtopocad.net/index.files/GIA_BLOCKS_EN.htm).

**Q: How can I export point codes and coordinates while placing point blocks?**  
**A:** `ZZB` / XYZOUT. Configure the output columns, file format and block/text options before recording the points. [XYZOUT guide](https://www.sdtopocad.net/index.files/XYZOUT_EN.htm).

**Q: How can I insert an image at its georeferenced position?**  
**A:** `ZIMGEO` for insertion with a matching world file, or `ZIMGS` to georeference an existing image. Confirm CRS and spatial accuracy. [Images guide](https://www.sdtopocad.net/index.files/IMAGES_EN.htm).

**Q: I need window/door schedules in a measured floor plan.**  
**A:** Use the relevant opening drafting tools and `YPPP` for the window/door legend. [Floor plans](https://www.sdtopocad.net/index.files/KATOPSEIS_EN.htm).

**Q: How do I mark a floor level?**  
**A:** Use `ZST`, select the appropriate level block and enter or calculate its value. [Level markers](https://www.sdtopocad.net/index.files/ZST_EN.htm).

**Q: How do I make a photographic location plan?**  
**A:** Use `PH` for numbered position and direction markers, and the photo folder/title helpers to document the set. [Photo plans](https://www.sdtopocad.net/index.files/PHOTOS_EN.htm).

**Q: How can I create a hatch legend?**  
**A:** `ZYPHH` collects selected hatch types and their characteristics; check scale and type consistency. [Hatch reference](https://www.sdtopocad.net/index.files/HATCH_EN.htm).

**Q: How can I change all numeric elevations by a constant?**  
**A:** Where they are TEXT values, use `ZNM`; for numeric block attributes consider `ZNMB`. Back up first and confirm the object/attribute selection and sign of the offset. [Calculations](https://www.sdtopocad.net/index.files/GIA_ARITHMOYS_EN.htm).

## 18. How to answer accurately from this manual

- Interpret the user's requested operation before selecting a command. A shared keyword such as “point”, “area” or “section” is not sufficient to identify the right command.
- If the question names an exact code, search for the code and check its category/context.
- Give a short direct answer first, then an ordered workflow when necessary. Include an official **English** source URL whenever available.
- Source pages may contain dialogs, screenshots and additional command prompts omitted from this consolidated handbook. Open the specific reference before giving undocumented keyboard sequences.
- Make clear when an instruction requires the user's independent engineering checks, especially for coordinates, volumes, parcel geometry, cadastral submissions, safety and legal compliance.
- Do not treat missing information as a nonexistent feature. The installed version or the official manual may include more commands than those listed here.

---

## 19. English command lookup

The command codes below follow the same identifiers used by Greek SDBOX, but their descriptions and source links refer to the English manual. A command may be available in more than one category. Use the linked article for exact prompts, optional settings and example illustrations.

### Survey Plan

[Detailed English help](https://www.sdtopocad.net/index.files/TOPOGRAFIA_EN.htm)

| Command | Description |
|---|---|
| `TOPOUNITS` | Configure survey units and precision |
| `ITAX` | Import point/block data from a coordinate file |
| `3DLL` | Enable or disable nonzero-Z warnings in supported commands |
| `DMLL` | Configure point-block and point-code recognition |
| `MR3` | Construct a rectangle using three known points |
| `MR2` | Construct a rectangle from two opposite corners |
| `MSP` | Construct a spline through known points |
| `MK3` | Construct a circle through three points |
| `MKK` | Create circle by center and radius |
| `MJL` | Construct a three-point arc |
| `ZIMIN` | Insert and organize raster images |
| `KNB` | Draw a scale-aware survey coordinate grid |
| `KNBS` | Draw the complete framed survey coordinate grid |
| `KNBT` | Label selected survey grid intersections |
| `PHKT` | Insert building outline indication along selected open points |
| `HKT` | Insert building indication within a closed boundary |
| `MCC` | Copy selected objects to point-code destinations |
| `MOF` | Create offset geometry using a survey point reference |
| `ZDD` | Measure successive distances |
| `XKT` | Insert predefined building-description annotations |
| `RGOG` | Create planning/building line annotations |
| `ZID` | Calculate/annotate selected closed-property area |
| `ZIDS` | Define and annotate an area point by point |
| `ZPID` | Prepare property vertex coordinate table |
| `ZPPOL` | Prepare polygon vertex coordinate table |
| `ZPRP` | Prepare benchmark/control-point table |
| `ZPTR` | Prepare survey control-point table |
| `ZPBL` | Prepare general block-coordinate table |
| `ZPFL` | Produce a CAD text/line table from a data file |
| `ZXID` | Export property vertex coordinates |
| `ZXPOL` | Export polygon vertex coordinates |
| `ZXTAX` | Export survey point coordinates |
| `ZXREP` | Export benchmark/control-point coordinates |
| `ZXTRI` | Export survey control-point coordinates |
| `MKO` | Project survey points to a section axis and write a data file |

### Lines and Polylines

[Detailed English help](https://www.sdtopocad.net/index.files/GIA_GRAMMES_EN.htm)

| Command | Description |
|---|---|
| `ZLL` | Draw selected line/polyline/arc types with SDBOX options |
| `GGY` | Draw lines with a fixed Y coordinate |
| `GGX` | Draw lines with a fixed X coordinate |
| `BLST` | Fit a line to selected points |
| `ZDTT` | Draw a rectangle from direction and side lengths |
| `ZR4` | Draw a four-point rectangle |
| `PP` | Construct a perpendicular at a point on a line |
| `3DPP` | Create a three-dimensional perpendicular |
| `ZEX` | Extend linework to a selected point |
| `ZCT` | Trim a segment using the command options |
| `GT` | Change a line's total length |
| `GD` | Extend a line by a given length |
| `Q1` | Break an entity at one point |
| `ZMES` | Place measure points on selected multiple objects |
| `PLL` | Join objects into a polyline |
| `S2P` | Convert spline geometry to polyline |
| `PLCO` | Reverse the direction of a line/polyline |
| `SCO` | Reverse the direction of a spline |
| `P2A` | Convert segments of a polyline to arcs |
| `P2S` | Convert polyline to spline |
| `P2L` | Convert polyline to individual lines |
| `PSP` | Display smoothed polyline form |
| `PHP` | Hide smoothed polyline form |
| `ADDPP` | Add vertices to a polyline |
| `DELPP` | Delete selected polyline vertices |
| `ZXGPT` | Export points of linear geometry |
| `ZZXTH` | Annotate station positions on a polyline |
| `ZZAPF` | Measure distances from a polyline start |
| `ZYPGR` | Create a line legend |

### Layer Management

[Detailed English help](https://www.sdtopocad.net/index.files/LAYERS_EN.htm)

| Command | Description |
|---|---|
| `ZF` | Freeze all layers except the selected layers |
| `ZFF` | Thaw frozen drawing layers |
| `ZFG` | Grey out layers other than those selected |
| `ZFGG` | Restore original layer display colors |
| `LLOL` | Highlight objects from a layer |
| `ZLAYINS` | Import layers from configured source lists |
| `ZVFE` | Select or configure the lists used by multiple commands |
| `ZLAYINS1` | Edit or select layer import list 1 |
| `ZLAYINS2` | Edit or select layer import list 2 |
| `ZLAYINS3` | Edit or select layer import list 3 |
| `ZLAYINS4` | Edit or select layer import list 4 |
| `ZLAYINS5` | Edit or select layer import list 5 |
| `ZLAYLISTP` | List properties/elements of drawing layers |
| `SDD` | Toggle groups of configured drawing layers |
| `XDD` | Control visibility of Xref layers |
| `XDDA` | Change selected Xref used by an operation |
| `SDD1` | Configure SDD layer list 1 |
| `SDD2` | Configure SDD layer list 2 |
| `SDD3` | Configure SDD layer list 3 |
| `SDD4` | Configure SDD layer list 4 |
| `SDD5` | Configure SDD layer list 5 |
| `ZLAYLIST` | List layer names in the drawing |
| `CTOLAY` | Copy selected entities onto another layer |
| `ZONELAY` | Move selected entities to a single layer |
| `ZLAYREN` | Rename drawing layers using configured options |
| `ZLAYREN1` | Edit layer rename list 1 |
| `ZLAYREN2` | Edit layer rename list 2 |
| `2R` | Convert selected items to the configured OFF layer convention |
| `LLL` | Work with the current LMAN state where supported |
| `DELLFIL` | Delete layer filters |
| `ZYPLAY` | Create a legend of layer types/properties |
| `ZYPLAY1` | Edit layer legend description set 1 |
| `ZYPLAY2` | Edit layer legend description set 2 |

### Blocks and Xrefs

[Detailed English help](https://www.sdtopocad.net/index.files/GIA_BLOCKS_EN.htm)

| Command | Description |
|---|---|
| `ASD` | Insert a symbol at its designed fixed dimensions |
| `ASDCHDIR` | Change the fixed-dimension symbols library directory |
| `ASDDIR` | Open the fixed-dimension symbols folder |
| `ASDA` | Insert a fixed-dimension symbol from a chosen directory |
| `ASDADIR` | Open folder of last symbol selected through ASDA |
| `MBL` | Insert a symbol scaled for current print scale |
| `MBLCHDIR` | Change scaled-symbols library directory |
| `MBLDIR` | Open scaled-symbols folder |
| `MBLA` | Insert scale-aware symbol from selected directory |
| `MBLADIR` | Open folder of last symbol chosen through MBLA |
| `ZZB` | Insert sequentially named blocks and optionally export points |
| `NNAR` | Insert sequential number inside a circle |
| `ZKYK` | Insert a selected circle symbol |
| `ZTET` | Insert a selected symbol in a plate |
| `ZBOR` | Insert north/arrow symbol |
| `ZBLK` | Count all blocks and Xrefs in the drawing |
| `ZYPBL` | Create block-symbol legend |
| `ZZATT` | Edit selected block attribute values |
| `ZZTAG` | Change block attribute tags |
| `DDE` | Edit existing text, block values or dimensions |
| `ZMSB` | Match scale of selected blocks |
| `ZPBL` | Create a block-coordinate table |
| `ZXBL` | Export block information |
| `ZCCXR` | Copy linked Xrefs into a chosen folder |
| `ZCXRD` | Change the search directory for Xrefs |
| `ZFXR` | Hide or reveal Xrefs |

### Dimensions

[Detailed English help](https://www.sdtopocad.net/index.files/DIASTASEIS_EN.htm)

| Command | Description |
|---|---|
| `ZDDAS` | Configure CAD dimension types and formatting |
| `ZDA` | Create aligned linear dimensions |
| `ZDAM` | Create a linear dimension variant |
| `ZDL` | Create linear dimension variant |
| `ZDLM` | Create linear dimension variant |
| `ZDOV` | Create a dimension in the configured orientation |
| `ZDD2` | Dimension between two selected objects |
| `ZDDG` | Dimension at intersection with an imaginary line |
| `ZDW` | Calculate dimension angle between three points |
| `ZDWS` | Dimension angle between selected objects |
| `ZDWA` | Annotate azimuth between two points |
| `ZDRAD` | Create radius dimension |
| `ZDDIAM` | Create diameter dimension |
| `ZDRADS` | Dimension radii of selected objects |
| `ZDDIAMS` | Dimension diameters of selected objects |
| `ZDCS` | Mark centers of selected objects |
| `ZDARC` | Dimension the length of an arc |
| `ZCDIM` | Find dimensions whose displayed value is overridden |
| `ZDDAT` | Select simple-text dimension format |
| `ZDLAYT` | Dimension elements based on their layer |
| `ZDST` | Dimension selected objects |
| `ZDGT` | Dimension using selected points |
| `ZDGTF` | Dimension points with a scale factor |
| `ZDEXASF` | Dimension survey control-point assurance measurements |
| `DDE` | Edit dimension text when supported |
| `ZDD` | Measure a succession of distances |

### Terrain TIN/DTM

[Detailed English help](https://www.sdtopocad.net/index.files/Page14280_EN.htm)

| Command | Description |
|---|---|
| `TTS` | Add supplementary terrain model points |
| `ZDTS` | Select elevation points for a DTM |
| `ZDT1` | Define standard triangulation type |
| `ZDT2` | Define exclusion triangle type |
| `ZDTMA` | Triangulate points within an open area |
| `ZTIN` | Construct a single triangle |
| `ZDTMB` | Rebuild terrain model incorporating breaklines |
| `ZDTM` | Triangulate points within a closed boundary |
| `TTNO` | Find triangles not created during triangulation |
| `TTG` | Display triangle centers |
| `TTGR` | Refresh triangle centers |
| `TTH` | Shade triangles for visual checks |
| `TTHR` | Remove triangle shading |
| `TTB` | Send triangles behind other objects |
| `TTF` | Bring triangles in front of other objects |
| `TTR` | Swap diagonal between two adjacent triangles |
| `TTD` | Delete triangle geometry |
| `TTV` | Toggle triangle layer visibility |
| `SSV` | Toggle elevation-point display layers |
| `ZDTMD` | Delete triangles within selected polylines |
| `ZXTIN` | Export triangulated geometry |

### Images

[Detailed English help](https://www.sdtopocad.net/index.files/IMAGES_EN.htm)

| Command | Description |
|---|---|
| `ZCCIM` | Copy selected image files into a target folder |
| `ZCIMD` | Change image file paths for selected image references |
| `ZFIM` | Isolate or reveal selected image references |
| `ZIMIN` | Insert raster images with organized layer naming |
| `ZIMAA` | Transfer linework between differently aligned images |
| `ZIMGEO` | Insert and automatically place georeferenced image |
| `ZIMGS` | Georeference an image already in the drawing |
| `ZIMDD` | Fit selected image/objects using real known side lengths |
| `ZIMNM` | Label selected image names |

### Floor Plans

[Detailed English help](https://www.sdtopocad.net/index.files/KATOPSEIS_EN.htm)

| Command | Description |
|---|---|
| `ZKKP` | Configure opening tags for windows and doors |
| `ZZDK` | Insert descriptions/dimensions for columns or beams |
| `SPARS` | Draw windows with floor-plan tool options |
| `SPOS` | Draw doors with floor-plan tool options |
| `ZVK` | Zoom to an identified column |
| `ZVBL` | Zoom to a selected tag or label |
| `YPPP` | Create window and door legend |
| `PARATH` | Insert window-symbol details |
| `PORTA` | Insert door-symbol details |
| `ZST` | Insert architectural floor-level/height markers |
| `MTM` | Create small section information |

### Sections & Elevations

[Detailed English help](https://www.sdtopocad.net/index.files/TOMES_OPSEIS_EN.htm)

| Command | Description |
|---|---|
| `GGY` | Draw horizontal projection lines at common Y |
| `GGX` | Draw vertical projection lines at common X |
| `GRY0` | Insert the Y=0.00 reference line |
| `GG1` | Raise selected linework to an assigned Y level |
| `GRPO` | Draw slab/floor elements for the selected level |
| `TST` | Insert section/elevation level annotations |
| `TSTGR` | Place a level annotation with a projected line |
| `CCTST` | Check existing level annotations |
| `TTXX` | Use text content from an external reference |
| `XDDA` | Select or change the referenced drawing |
| `OPSPAR` | Represent a window opening in section/elevation |

### Calculations

[Detailed English help](https://www.sdtopocad.net/index.files/GIA_ARITHMOYS_EN.htm)

| Command | Description |
|---|---|
| `ZNM` | Perform arithmetic on numerical TEXT objects |
| `ZNMB` | Perform arithmetic on numerical block attributes |
| `D+D` | Perform arithmetic using typed/measured distances |
| `L+L` | Perform calculations on selected line lengths |
| `P+P` | Perform calculations on selected polyline lengths |
| `A+A` | Perform calculations on arc lengths |
| `T+T` | Perform calculations on numeric text objects |
| `S+S` | Perform calculations on selected spline lengths |
| `LPATS` | Calculate with several geometric object types |
| `O+O` | Use actual dimension values in calculations |
| `E+E` | Calculate using areas of eligible objects |
| `DDD` | Calculate a segmented or broken distance |
| `ZP2T` | Write calculation results into a text object |
| `KL` | Calculate a slope from selected data |
| `ZAA` | Calculate selected area |
| `ZAAS` | Calculate area by specified points |
| `BVC` | Build numeric or text data from selected objects |
| `DBVC` | Refresh selected numeric or text information |

### Texts

[Detailed English help](https://www.sdtopocad.net/index.files/GIA_KEIMENA_EN.htm)

| Command | Description |
|---|---|
| `ETT` | Align selected text objects along one axis |
| `STT` | Continue text on a new line below an existing text |
| `KTT` | Adjust text line spacing |
| `KN` | Add specified spaces to text |
| `TT0` | Delete empty text entities |
| `TTT` | Edit selected texts |
| `F2T` | Import text content from a file |
| `T2F` | Export drawing texts into a file |
| `TTMT` | Convert TEXT objects to MTEXT |
| `DDE` | Edit selected text or attribute contents |
| `ZYPTT` | Create a text-type legend |
| `ZZCHR` | Show character information for available text types |

### Hatch

[Detailed English help](https://www.sdtopocad.net/index.files/HATCH_EN.htm)

| Command | Description |
|---|---|
| `ZHH` | Select/insert hatch scaled for drawing plot scale |
| `HH0` | Apply solid grey hatch with color 250 |
| `HH1` | Apply solid grey hatch with color 251 |
| `HH2` | Apply solid grey hatch with color 252 |
| `HH3` | Apply solid grey hatch with color 253 |
| `HH4` | Apply solid grey hatch with color 254 |
| `ZYPHH` | Create a hatch legend of selected objects |
| `ZVFE` | Choose description lists for hatch legend and other commands |
| `ZYPHH1` | Edit or activate hatch description list 1 |
| `ZYPHH2` | Edit or activate hatch description list 2 |
| `ZHHLIST` | Generate list of hatch names in the drawing |
| `ZHHLS` | Export detailed hatch properties of selected items |

### Titles & Legends

[Detailed English help](https://www.sdtopocad.net/index.files/YPOMNHMATA_EN.htm)

| Command | Description |
|---|---|
| `ZTITLOI` | Select and insert a title block |
| `TITLOICHDIR` | Change directory for title blocks |
| `ERGACHDIR` | Change directory for project database resources |
| `TCDS` | View title-block field codes |
| `ZZBASE` | Manage project/drawing information database |
| `PHSTI2` | Insert compact title or stamp |
| `ZSTI` | Edit short-name title settings |
| `YYTT` | Insert common notes and headers |
| `ZYPGR` | Generate a line-type legend |
| `ZYPBL` | Generate a block-symbol legend |
| `ZYPHH` | Generate a hatch legend |
| `ZYPTT` | Generate a text-type legend |
| `ZYPLAY` | Generate a layer legend |
| `YPPP` | Generate window and door legend |

### Photo Plan

[Detailed English help](https://www.sdtopocad.net/index.files/PHOTOS_EN.htm)

| Command | Description |
|---|---|
| `PH` | Place numbered photo location-and-direction symbol |
| `PHLIST` | Count photographic location symbols |
| `PHSTI1` | Prepare slanted photo title |
| `PHSTI2` | Prepare photo title or compact stamp |
| `PHKLIM` | Set photo scale |
| `ZSTI` | Edit standard short title |
| `FFCHDIR` | Select photo folder |
| `ZDFFC` | Open configured photos folder |
| `DFF` | Open a specific photo |

### Modify and Select

[Detailed English help](https://www.sdtopocad.net/index.files/MODIFY_EN.htm)

| Command | Description |
|---|---|
| `ZMRS` | Fit selected objects using mean transformation from point pairs |
| `ZDFS` | Convert objects across plot scales |
| `ZDFA` | Convert selected dimensions to real dimensions |
| `ZZS` | Selection and overview helper |
| `ZZSP` | Continue a previous selection |
| `ZZSS` | Restore last selection |
| `ZZSA` | Select objects by properties |
| `ZRPL` | Replace selected objects with a block |
| `ZRPLR` | Replace objects based on layer |
| `ZSTX` | Align selected entities |
| `ZRR` | Rotate selected objects using enhanced selection |
| `ZCH` | Change object properties in bulk |
| `ZCHL` | Change linetype scale |
| `ZCHW` | Change lineweight |
| `ZCHHS` | Change hatch scale |
| `ZMM` | Move filtered objects |
| `ZCC` | Copy filtered objects |
| `ZMY` | Move objects in Y direction |
| `ZMX` | Move objects in X direction |
| `ZEE` | Erase objects selected with filters |
| `ZCS` | Scale blocks around their insertion point |
| `ZCR` | Rotate blocks around their insertion point |
| `LL0` | Delete entities based on length criteria |
| `ZZ0` | Flatten selected objects to Z=0 |
| `ZXAG` | Export selected information to file |

### Levels

[Detailed English help](https://www.sdtopocad.net/index.files/ZST_EN.htm)

| Command | Description |
|---|---|
| `ZST` | Insert intelligent architectural level and height marks |
| `ZSTA` | Browse and insert chosen level-symbol block |
| `ZST1` | Edit level-symbol descriptions |
| `ZSTLIST` | View level-symbol reference list |
| `ZSTDIR` | Open the level-symbol directory |


## 20. English source directory

Use these official addresses for primary documentation. The HTML documents are reference pages with command explanations; the PDF documents are illustrated, multi-page workflows. A valid link in this directory does not necessarily mean every screenshot, page or minor version-specific command is reproduced above.

### English HTML help

- [Survey plan tools and survey point commands](https://www.sdtopocad.net/index.files/TOPOGRAFIA_EN.htm)
- [Lines, polylines and geometric construction](https://www.sdtopocad.net/index.files/GIA_GRAMMES_EN.htm)
- [Layers and external references](https://www.sdtopocad.net/index.files/LAYERS_EN.htm)
- [Blocks, Xrefs, and symbols libraries](https://www.sdtopocad.net/index.files/GIA_BLOCKS_EN.htm)
- [CAD dimension tools](https://www.sdtopocad.net/index.files/DIASTASEIS_EN.htm)
- [DTM / TIN triangulation and editing](https://www.sdtopocad.net/index.files/Page14280_EN.htm)
- [Raster images and georeferencing](https://www.sdtopocad.net/index.files/IMAGES_EN.htm)
- [Floor-plan drafting and opening tags](https://www.sdtopocad.net/index.files/KATOPSEIS_EN.htm)
- [Building sections and elevations](https://www.sdtopocad.net/index.files/TOMES_OPSEIS_EN.htm)
- [Calculations with numbers and CAD objects](https://www.sdtopocad.net/index.files/GIA_ARITHMOYS_EN.htm)
- [Text drafting and editing](https://www.sdtopocad.net/index.files/GIA_KEIMENA_EN.htm)
- [Hatch drawing and legends](https://www.sdtopocad.net/index.files/HATCH_EN.htm)
- [Titles, project fields and explanatory legends](https://www.sdtopocad.net/index.files/YPOMNHMATA_EN.htm)
- [Photo location plans](https://www.sdtopocad.net/index.files/PHOTOS_EN.htm)
- [Modify and select CAD objects](https://www.sdtopocad.net/index.files/MODIFY_EN.htm)
- [Floor and height marker library](https://www.sdtopocad.net/index.files/ZST_EN.htm)
- [Sequential block insertion / XYZOUT](https://www.sdtopocad.net/index.files/XYZOUT_EN.htm)
- [Maps and geographic backgrounds](https://www.sdtopocad.net/index.files/MAPS_SDBOX_EN.htm)
- [File operations and Google Earth](https://www.sdtopocad.net/index.files/DIAFORA_EN.htm)
- [Frequently asked questions and troubleshooting](https://www.sdtopocad.net/index.files/FAQ_EN.htm)
- [SDBOX overview](https://www.sdtopocad.net/index.files/WHAT_IS_SDBOX_EN.htm)
- [Default layer selection and settings](https://www.sdtopocad.net/index.files/EPILOGES_LAYER_EN.htm)
- [Line/polyline point construction options](https://www.sdtopocad.net/index.files/EPILOGES_MLLMBL_EN.htm)
- [Filter-based object selection](https://www.sdtopocad.net/index.files/EPILOGH_ANT_ME_FILTRA_EN.htm)
- [Plot scale](https://www.sdtopocad.net/index.files/KLIMAKA_EN.htm)
- [Interactive mathematical operations](https://www.sdtopocad.net/index.files/PRAXEIS_EN.htm)
- [Block symbol legend](https://www.sdtopocad.net/index.files/ZYPBL_EN.htm)
- [Line-type legend](https://www.sdtopocad.net/index.files/ZYPGR_EN.htm)

### Illustrated English PDF guides

- [Survey plan drafting — 21 pages](https://www.sdtopocad.net/sdbox_TOPO_EN.pdf)
- [Floor-plan drafting — 17 pages](https://www.sdtopocad.net/sdbox_FLOOR-PLAN_EN.pdf)
- [Building section drafting — 16 pages](https://www.sdtopocad.net/sdbox_SECTION_EN.pdf)
- [Building elevation drafting — 15 pages](https://www.sdtopocad.net/sdbox_ELEV_EN.pdf)

## 21. Additional practical workflows from the four English illustrated guides

The following material supplements the thematic HTML command pages. It is especially useful when users request a complete drawing rather than an isolated command. It is based on the four explicitly English PDF guides. For visual examples and alternative operations consult the PDF itself.

### 21.1 More detail: complete survey plan

The [21-page survey-plan guide](https://www.sdtopocad.net/sdbox_TOPO_EN.pdf) describes a production workflow: configure survey units; import points; draw buildings and terrain features; shade existing surfaces; place vegetation/architectural symbols; annotate streets and uses; set height references; add the grid and property geometry; and prepare declarations, tables and drawing sheets. It also introduces `XKT` for building-characteristic text and `NNB`, `NNA`, `NNX`, `NNOD`, `NNTOP` for different annotation categories. To add a **red on-site check reminder**, the guide describes `VLV` for an inspection dimension and `POP` for a note that must be resolved before delivery. Their associated temporary note layers should not remain visible on the final plot. Treat this as a QC practice, not a substitute for field verification.

To display terrain and hardscape conditions, the illustrated guide includes hatch tools such as `HHP` (soil/flowerbed), `HGR` (grass), `HPOES` (ground cover), `HTHAM` (shrubs), `HHD` (area boundary/marking) and `HHT` (dotted areas). Their printed appearance depends on scale, pattern and layer configuration.

For geometry exported to construction equipment, verify the projected coordinate system, precision and column order; do not silently correct field values or change point IDs. Save a record of the input survey file along with the issued drawing.

### 21.2 More detail: multi-storey floor-plan setup

The [17-page floor-plan guide](https://www.sdtopocad.net/sdbox_FLOOR-PLAN_EN.pdf) distinguishes `KLAY` (default layers for a single plan/floor) from `KTLMAN` (layer/floor organization for several stories). It explains the use of three-character floor prefixes for layers and optional layer-management states/filters; `ZKKFIL` is the related filter helper. `50100Scale` controls a display/printing convention for architectural texts and markers on 1:50 and 1:100 plans. This is about annotation appearance rather than changing true geometry.

The floor-plan drafting sequence includes wall, column, projection, stair and hidden-component groups. The illustrated workflow gives the following specialist tools:

| Command | Function in illustrated floor-plan workflow |
|---|---|
| `KLAY` | Insert a standard floor's layers |
| `KTLMAN` | Set up multiple floors, filters and layer states where available |
| `ZKKFIL` | Apply floor-specific layer filters |
| `50100Scale` | Choose 1:50 / 1:100 annotation size option |
| `LTOIX` | Draft wall elements on the associated layer |
| `LFER` | Draft columns / structural elements |
| `LPROB` | Draft projected elements |
| `LDOK` | Draft overhead construction indications |
| `LTK` | Draft hidden walls |
| `LPK` | Draft hidden projections |
| `BS` | Insert staircase ascent arrow |
| `BSA` | Insert overhead ascent arrow |
| `rampa` | Insert ramp arrow |
| `TS` | Stair section/overhead projection elements |
| `OSK` | Assist stair-step spacing and offset |
| `OSKM` | Automatically draft stairs using offset-based workflow |
| `SPAR`, `SPART` | Window numbering/type variants |
| `SPO`, `SPORT` | Door numbering/type variants |
| `SANS`, `SAN`, `SANPS`, `SANP` | Other opening and sill/lintel tag variants |
| `NNX`, `NNB`, `NNA`, `NNC`, `NND`, `NNOD` | Room use, materials, labels and notes |
| `NNXY` | Place coordinate notes |
| `NNH` | Label height of overhead elements |
| `VLV` | Insert temporary verification dimension |
| `ZWB` | Export selected drawing content to a new drawing/folder |
| `ZZPDF` | Prepare a PDF drawing output through SDBOX |
| `ZZARIAL` | Replace SDBOX fonts with Arial for compatibility where required |

Keep the drawing's survey/architectural coordinate conventions clear, choose appropriate line and layer conventions for hidden objects, and verify opening orientation and identifiers before generating a schedule. Before sharing a DWG, the PDF suggests making a clean deliverable drawing, checking external image/Xref paths, fonts, CTB files and the DWG version required by the recipient. Never apply a cleanup command blindly to a model containing important 3D data.

### 21.3 More detail: section and elevation from a floor-plan Xref

The [16-page section guide](https://www.sdtopocad.net/sdbox_SECTION_EN.pdf) and [15-page elevation guide](https://www.sdtopocad.net/sdbox_ELEV_EN.pdf) use comparable processes. Begin with section or elevation layers (`TLAY` or `OLAY`), optionally with a three-character identifier when several views share a drawing. Insert the zero reference line (`GRY0`), insert and position the plan as an Xref (`ZINSXREF`), and optionally divide the screen into two viewports (`ZV2H`). `ZVF` establishes alignment between views, and `ZVFF` can restore it while working. Then derive projected linework (`GGX`, `GGY`, `GG1`) and draw slabs and other required components with the relevant drafting tools. `TTXX` can reuse text from the referenced plan, and `OPSPAR` creates configured window-opening representations in elevation/section.

| Command | Function in section/elevation workflow |
|---|---|
| `TLAY` | Import conventional section-plan layers |
| `OLAY` | Import conventional elevation-plan layers |
| `GRY0` | Create datum/reference Y=0 line |
| `ZINSXREF` | Insert aligned floor-plan Xref |
| `ZV2H` | Split workspace into two horizontal viewports |
| `ZVF` | Establish X alignment between viewports |
| `ZVFF` | Re-align viewports to the configured relationship |
| `GGY` | Horizontal projection at a common level |
| `GGX` | Vertical projection at a common X |
| `GG1` | Raise projected lines to selected Y |
| `ZSKO` | Create staircase section from two points and step count |
| `OPSPAR` | Generate a selected type of window in elevation/section |
| `TST`, `TSTGR` | Insert level marks with or without a reference line |
| `CCTST` | Check section/elevation levels |
| `TTXX` | Reuse suitable labels from the referenced plan |

Section/elevation coordinates should use a consistent vertical datum. Rotate and locate the reference plan carefully; lines projected from a wrongly positioned Xref will look organized while remaining geometrically wrong. On-site surveyed elevations are independent source measurements and should not be inferred only from drawing annotations.

---

## 22. Versioning, limitations, and planned updates

This English manual is a **working reference** compiled from verified public English articles and four official English PDF guides. It consolidates task guidance and documented command descriptions; it includes the full available readable text of **58 collected English HTML help articles** later in this file, but it is **not** a transcription of PDF pages or a complete inventory of every SDBOX command. The full descriptions, pictures and fine-grained prompts are available via the links above. Before publication, verify that all referenced commands are still available in the relevant product edition and that release-specific behavior is current.

Do not present the editorial summaries as official verbatim instructions or the file as an exhaustive command inventory without an independent completeness check against the English site and product menu. This manual is written in English; its command identifiers are intentionally identical to those in the Greek release.

**Stable intended URL:** https://www.sdtopocad.net/SDBOX_AI_Help_EN.md  
**Download page:** https://www.sdtopocad.net/SDBOX_AI_Download_EN.html  
**Manual Portal:** https://www.sdtopocad.net/?lang=en

---


---

---

# SDBOX English menu reference (original MNU)

**Primary source:** `SDBOX22_EN.MNU`, provided by the SDBOX developer. Decoded as Windows-1252. This section preserves English menu labels, actual menu paths, toolbar names and the full available English help descriptions from `HELPSTRINGS`. The menu is source documentation; it is **not** reproduced as executable CAD code.

**Important distinctions for AI assistants:**

- **Menu identifier** (`ID_ITAX`, etc.) is an internal ID, *not automatically the typed CAD command*. Identify a command using the menu's explicit `\t` shortcut or a directly executed CAD macro; otherwise quote the menu label and do not invent a command.
- The *menu location* documents the original English MNU layout. Newer Ribbon versions may place the same feature differently; menu placement is not a software-availability guarantee.
- A *toolbar* may include a command not present in the popup menu. The same menu identifier may occur in multiple menu paths.
- The *help description* is copied from the original English source. Some descriptions contain spelling or wording issues; these are retained to avoid inventing or silently changing technical meaning. Where a sentence is ambiguous, consult the detailed official English help article.
- A function identified as "older" in the original help is still documented here; do not infer feature removal or availability without a specific supporting source.

**Historical MNU source summary (before filtering):** 1,244 English menu entries · 957 toolbar button entries · 751 identifiers with `HELPSTRINGS` descriptions · 899 distinct internal menu/toolbar/help identifiers. The command entries displayed below have been filtered against the current English CUIX; these historical source counts are **not** retained-command counts.

## 23. Index of menu commands and original English help

Search for the command code (for example `ITAX`, `ZDTMISO` or `NNAR`) or the action in its description. Each entry reports the closest available primary-source documentation.

### Alphabetical navigation

[A](#mnu-a) · [B](#mnu-b) · [C](#mnu-c) · [D](#mnu-d) · [E](#mnu-e) · [F](#mnu-f) · [G](#mnu-g) · [H](#mnu-h) · [I](#mnu-i) · [K](#mnu-k) · [L](#mnu-l) · [M](#mnu-m) · [N](#mnu-n) · [O](#mnu-o) · [P](#mnu-p) · [Q](#mnu-q) · [R](#mnu-r) · [S](#mnu-s) · [T](#mnu-t) · [U](#mnu-u) · [V](#mnu-v) · [X](#mnu-x) · [Y](#mnu-y) · [Z](#mnu-z) · [#](#mnu-other)

### MNU A {#mnu-a}

#### `ID_ADA`
**English menu label:** Deviation off 2 numbers — ADA  
**Direct CAD command in menu/toolbar:** `ADA`  
**Displayed shortcut(s):** `ADA`  
**Menu location(s):** Math operations and calculations  
**Toolbar(s):** 02 Numbers  
**Original English help:** You select two numbers or distances or a combination of them and the percentage deviation (%) is automatically calculated.

#### `ID_ADDPP`
**English menu label:** Add vertices to polyline — ADDPP  
**Direct CAD command in menu/toolbar:** `ADDPP`  
**Displayed shortcut(s):** `ADDPP`  
**Menu location(s):** Lines &gt; Manage Polyline/Spline  
**Toolbar(s):** 05 Lines · Cadaster_Tools  
**Original English help:** Select a point anywhere on screen and it is added between the nearest Polyline vertices.

#### `ID_ANMON`
**English menu label:** Association info OFF  
**Menu location(s):** Dimensions &gt; Dimensions Autocad type  
**Original English help:** Yellow exclamation marks for dimensions are removed from the screen.

#### `ID_ASD`
**English menu label:** Insert 1:1 scale symbols — ASD  
**Direct CAD command in menu/toolbar:** `ASD`  
**Displayed shortcut(s):** `ASD`  
**Menu location(s):** Floor plans &gt; Floor plan...step by step &gt; 4. Architectural symbols · Sections-Elevation plans &gt; Section...step by step &gt; 11. Arch. Symbols · Blocks (symbols) &gt; Insert Symbols &gt; Symbols (scale 1:1)  
**Toolbar(s):** 1:1 scale symbols  
**Original English help:** Architectural or other 1:1 scale symbols that are selected from library. You can enrich the library with your own blocks.

#### `ID_ASDA`
**English menu label:** Insert by choosing search path — ASDA · Insert symbols by choosing address — ASDA · Insert symbols by choosing search path — ASDA  
**Direct CAD command in menu/toolbar:** `ASDA`  
**Displayed shortcut(s):** `ASDA`  
**Menu location(s):** Floor plans &gt; Floor plan...step by step &gt; 4. Architectural symbols · Sections-Elevation plans &gt; Section...step by step &gt; 11. Arch. Symbols · Sections-Elevation plans &gt; Elevation view...step by step &gt; 12. Arch. Symbols · Blocks (symbols) &gt; Insert Symbols &gt; Symbols (scale 1:1)  
**Toolbar(s):** 1:1 scale symbols  
**Original English help:** Insert 1:1 scale symbols. The selection is made from a windows window and you can choose any drawing to import.

#### `ID_ASDADIR`
**English menu label:** Open ASDA Folder — ASDADIR · Open folder — ASDADIR  
**Direct CAD command in menu/toolbar:** `ASDADIR`  
**Displayed shortcut(s):** `ASDADIR`  
**Menu location(s):** Floor plans &gt; Floor plan...step by step &gt; 4. Architectural symbols · Sections-Elevation plans &gt; Section...step by step &gt; 11. Arch. Symbols · Sections-Elevation plans &gt; Elevation view...step by step &gt; 12. Arch. Symbols · Blocks (symbols) &gt; Insert Symbols &gt; Symbols (scale 1:1)  
**Toolbar(s):** 1:1 scale symbols  
**Original English help:** Open the folder containing the Fixed Dimension block that was last inserted with the ASDA command

#### `ID_ASDCHDIR`
**English menu label:** Change search path of arch. symbolsl — ASDCHDIR · Change 1:1 scale symbols search path — ASDCHDIR  
**Direct CAD command in menu/toolbar:** `ASDCHDIR`  
**Displayed shortcut(s):** `ASDCHDIR`  
**Menu location(s):** Floor plans &gt; Floor plan...step by step &gt; 4. Architectural symbols · Blocks (symbols) &gt; Insert Symbols &gt; Symbols (scale 1:1)  
**Toolbar(s):** 1:1 scale symbols  
**Original English help:** Define the location where 1:1 scale symbols are located. Path can also be on networke.

#### `ID_ASDDIR`
**English menu label:** Open folder — ASDDIR  
**Direct CAD command in menu/toolbar:** `ASDDIR`  
**Displayed shortcut(s):** `ASDDIR`  
**Menu location(s):** Sections-Elevation plans &gt; Section...step by step &gt; 11. Arch. Symbols · Sections-Elevation plans &gt; Elevation view...step by step &gt; 12. Arch. Symbols · Blocks (symbols) &gt; Insert Symbols &gt; Symbols (scale 1:1)  
**Toolbar(s):** 1:1 scale symbols  
**Original English help:** Open the Letter containing the Fixed Dimension blocks. You can with new folders configure categories or add new blocks.

#### `ID_ASDT`
**English menu label:** Insert symbol — ASD  
**Displayed shortcut(s):** `ASD`  
**Menu location(s):** Sections-Elevation plans &gt; Elevation view...step by step &gt; 12. Arch. Symbols  
**Original English help:** Importing 1:1 scale symbols from library like People, Cars, Shrubs, Trees, Door Frames, Wall Lights, Lighting Columns, Roof Elements.

#### `ID_ASYNA`
**English menu label:** Calculations with Arcs — A+A  
**Direct CAD command in menu/toolbar:** `A+A`  
**Displayed shortcut(s):** `A+A`  
**Menu location(s):** Math operations and calculations &gt; Math Operations and Objects &gt; By type  
**Toolbar(s):** 02 Numbers  
**Original English help:** Operations with Arc objects. The length of each Arc takes part. Other numbers or distances can also be included.

#### `ID_AXDD`
**English menu label:** Change Xref — XDDA · Reset Xref — XDDA  
**Direct CAD command in menu/toolbar:** `XDDA`  
**Displayed shortcut(s):** `XDDA`  
**Menu location(s):** Topography &gt; Survey plan...step by step &gt; 2a. Manage survey points &gt; 2ac. On-Off other layers · Sections-Elevation plans &gt; Section...step by step &gt; 2a. Insert floor plan - Vports - Lay on off · Sections-Elevation plans &gt; Section...step by step &gt; 3a. Section Drawing Tools · Sections-Elevation plans &gt; Elevation view...step by step &gt; 2a. Insert floor plan - Vports - Lay on off · Sections-Elevation plans &gt; Elevation view...step by step &gt; 3a. Elevation Drawing tools · Layers &gt; On-Off  
**Original English help:** Change Xref using commands like XDD.

### MNU B {#mnu-b}

#### `ID_BFF`
**English menu label:** Offset BFF — BFF  
**Direct CAD command in menu/toolbar:** `BFF`  
**Displayed shortcut(s):** `BFF`  
**Menu location(s):** Offset &gt; Offset of area by center point  
**Toolbar(s):** 08 Offset  
**Original English help:** Repeated offset at a specified distance by selecting points within closed areas.

#### `ID_BFF2`
**English menu label:** Offset BFF2 — BFF2  
**Direct CAD command in menu/toolbar:** `BFF2`  
**Displayed shortcut(s):** `BFF2`  
**Menu location(s):** Offset &gt; Offset of area by center point  
**Toolbar(s):** 08 Offset  
**Original English help:** Repeatable duble offset at 2 defined distances with selection of points within closed areas.

#### `ID_BLPMODE`
**English menu label:** Remove blips +  
**Menu location(s):** Settings &gt; Various for Autocad  
**Original English help:** No matching HELPSTRINGS description in this MNU. Refer to the menu label and original manual.

#### `ID_BLST`
**English menu label:** Optimum straight line — BLST  
**Direct CAD command in menu/toolbar:** `BLST`  
**Displayed shortcut(s):** `BLST`  
**Menu location(s):** Topography &gt; Survey plan...step by step &gt; 13a. Lines study tools · Lines  
**Toolbar(s):** 05 Lines · Tools  
**Original English help:** Calculation of optimal line giving the points through which a line will pass as close as possible.

#### `ID_BS`
**English menu label:** Climping staircase line — BS · Staircase arrow — BS  
**Direct CAD command in menu/toolbar:** `bs`, `BS`  
**Displayed shortcut(s):** `BS`  
**Menu location(s):** Floor plans &gt; Floor plan...step by step &gt; 2. Staircases - Ramps · Lines &gt; Draw by typing command &gt; Lines with Arrows  
**Toolbar(s):** Staircases and ramps  
**Original English help:** Ladder arrow indication. You select the beginning, intermediate points of change of direction and the end of the ladder. Result: Circle at the beginning, Polyline for the intermediate points and wide at the end of the ladder.

#### `ID_BSA`
**English menu label:** Climping staircase line overview — BSA · Staircase arrow bottom view — BSA  
**Direct CAD command in menu/toolbar:** `bsa`, `BSA`  
**Displayed shortcut(s):** `BSA`  
**Menu location(s):** Floor plans &gt; Floor plan...step by step &gt; 2. Staircases - Ramps · Lines &gt; Draw by typing command &gt; Lines with Arrows  
**Toolbar(s):** Staircases and ramps  
**Original English help:** Ladder arrow indication. You select the beginning, intermediate points of change of direction and the end of the ladder. Result: hidden Polyline for the intermediate points and arrow contour at the end of the ladder.

#### `ID_BVC`
**English menu label:** 10. Elevation display — BVC · Copy numbers (or phrases) from text or block — BVC  
**Direct CAD command in menu/toolbar:** `BVC`  
**Displayed shortcut(s):** `BVC`  
**Menu location(s):** Topography &gt; Survey plan...step by step &gt; 8. Datum level · Math operations and calculations &gt; Add numbers to design  
**Toolbar(s):** 02 Numbers · Level datum and tools  
**Original English help:** Add text that you can wrtie or select from existing block, text or xref. You can also set a fixed prefix or suffix to be added. You can set a multiplier and a decimal positions when dispalying numbers.

### MNU C {#mnu-c}

#### `ID_CCTST`
**English menu label:** Level check  
**Direct CAD command in menu/toolbar:** `CCTST`  
**Menu location(s):** Sections-Elevation plans &gt; Section...step by step &gt; 6a. Level tools · Sections-Elevation plans &gt; Elevation view...step by step &gt; 6a. Level tools  
**Toolbar(s):** 14 Sections_Elevations · 14a Section  step by step · 14b Elevation step by step  
**Original English help:** You select an area of the drawing and levels with incorrect altitude are indicated by a red circle.

#### `ID_CEC`
**English menu label:** 23. Tasc check — CHECK-CEC  
**Direct CAD command in menu/toolbar:** `CHECK`  
**Displayed shortcut(s):** `CHECK-CEC`  
**Menu location(s):** Topography &gt; Survey plan...step by step  
**Original English help:** A form opens where you can check which of the predefined to-do lists have been completed. The list that appears can be specified or changed with the commands CEC1 - CEC5.

#### `ID_CEC1`
**English menu label:** Check list - 1 — CEC1  
**Direct CAD command in menu/toolbar:** `CEC1`  
**Displayed shortcut(s):** `CEC1`  
**Menu location(s):** Misc &gt; Check List &gt; Command line  
**Toolbar(s):** Tasks check  
**Original English help:** Define - Open - Modify the 1st task file that appears in the CEC command

#### `ID_CEC2`
**English menu label:** Check list - 2 — CEC2  
**Direct CAD command in menu/toolbar:** `CEC2`  
**Displayed shortcut(s):** `CEC2`  
**Menu location(s):** Misc &gt; Check List &gt; Command line  
**Toolbar(s):** Tasks check  
**Original English help:** Define - Open - Modify the 2nd file of tasks displayed in the CEC command.

#### `ID_CEC3`
**English menu label:** Check list - 3 — CEC3  
**Direct CAD command in menu/toolbar:** `CEC3`  
**Displayed shortcut(s):** `CEC3`  
**Menu location(s):** Misc &gt; Check List &gt; Command line  
**Toolbar(s):** Tasks check  
**Original English help:** Define - Open - Modify the 3rd file of tasks displayed in the CEC command.

#### `ID_CEC4`
**English menu label:** Check list - 4 — CEC4  
**Direct CAD command in menu/toolbar:** `CEC4`  
**Displayed shortcut(s):** `CEC4`  
**Menu location(s):** Misc &gt; Check List &gt; Command line  
**Toolbar(s):** Tasks check  
**Original English help:** Define - Open - Modify the 4th task file that appears in the CEC command.

#### `ID_CEC5`
**English menu label:** Check list - 5 — CEC5  
**Direct CAD command in menu/toolbar:** `CEC5`  
**Displayed shortcut(s):** `CEC5`  
**Menu location(s):** Misc &gt; Check List &gt; Command line  
**Toolbar(s):** Tasks check  
**Original English help:** Define - Open - Modify the 5th file of tasks displayed in the CEC command

#### `ID_CHECK`
**English menu label:** Task check CHECK-CEC  
**Direct CAD command in menu/toolbar:** `CHECK`  
**Toolbar(s):** Tasks check · 16a Survey plan step by step  
**Original English help:** No matching HELPSTRINGS description in this MNU. Refer to the menu label and original manual.

#### `ID_COPY`
**English menu label:** Model: Copy frame in to other positions  
**Direct CAD command in menu/toolbar:** `copy`  
**Menu location(s):** Topography &gt; Print tiles  
**Toolbar(s):** 18a Print_Tiles  
**Original English help:** No matching HELPSTRINGS description in this MNU. Refer to the menu label and original manual.

#### `ID_CTOLAY`
**English menu label:** Copy to layer — CTOLAY  
**Direct CAD command in menu/toolbar:** `ctolay`, `CTOLAY`  
**Displayed shortcut(s):** `CTOLAY`  
**Menu location(s):** Layers &gt; Modify layers  
**Toolbar(s):** 06 Layers  
**Original English help:** Copy selected items to an existing or new layer.

#### `ID_CV4`
**English menu label:** Pline with block at the end — CV4  
**Direct CAD command in menu/toolbar:** `CV4`  
**Displayed shortcut(s):** `CV4`  
**Menu location(s):** Lines &gt; Draw by typing command &gt; Lines with Arrows  
**Original English help:** Pline with block at the end. You select the points where a polyline is added and at the end a block of your choice is placed.

### MNU D {#mnu-d}

#### `ID_DBVC`
**English menu label:** Edit display properties and selection filters — DBVC  
**Direct CAD command in menu/toolbar:** `DBVC`  
**Displayed shortcut(s):** `DBVC`  
**Menu location(s):** Math operations and calculations &gt; Add numbers to design  
**Toolbar(s):** 02 Numbers  
**Original English help:** Edit prefix, suffix, decimal places and size factor for final text and set options for blocks or attributes which participate during BVC command.

#### `ID_DDD`
**English menu label:** Path length — DDD  
**Direct CAD command in menu/toolbar:** `D+D`, `DDD`  
**Displayed shortcut(s):** `DDD`  
**Menu location(s):** Math operations and calculations &gt; Math Operations and Objects  
**Toolbar(s):** 02 Numbers  
**Original English help:** You select a route on the screen to calculate the total length. The route is temporarily planned on the screen. The final calculation also shows each individual distance.

#### `ID_DDE`
**English menu label:** Edit text — DDE · Edit dimension value — DDE · Edit text or block values — DDE  
**Direct CAD command in menu/toolbar:** `dde`, `Dde`, `DDE`  
**Displayed shortcut(s):** `DDE`  
**Menu location(s):** Text &gt; Edit text · Dimensions · Blocks (symbols) &gt; Edit  
**Toolbar(s):** Modify 1 · 04 Texts · 03 Blocks · 11 Dimensions  
**Original English help:** Editing content for Text (Text, Mtext), Attributes of a block and Dimensions.

#### `ID_DDID`
**Original English help:** Polygon distribution

#### `ID_DEDNUM`
**English menu label:** Number  
**Direct CAD command in menu/toolbar:** `Nu`  
**Toolbar(s):** Data  
**Original English help:** No matching HELPSTRINGS description in this MNU. Refer to the menu label and original manual.

#### `ID_DEDPISO`
**English menu label:** Back  
**Direct CAD command in menu/toolbar:** `Xp`  
**Toolbar(s):** Data  
**Original English help:** No matching HELPSTRINGS description in this MNU. Refer to the menu label and original manual.

#### `ID_DEFSCADDOP`
**English menu label:** Default settings for all drawings — DefScaddOp  
**Direct CAD command in menu/toolbar:** `DefScaddOp`  
**Displayed shortcut(s):** `DefScaddOp`  
**Menu location(s):** Settings &gt; Settings for Layer, Color, size  
**Toolbar(s):** 19 Settings  
**Original English help:** The default settings of the program concerning layer, Color, Ltype, coefficients, etc. are restored. proposed at the outset by the commands.

#### `ID_DEFZZTOPO`
**English menu label:** Default settings for building mapping and topographic surveys — DefZZTOPO · Default settings for building mapping and toporaphic surveys — DefZZTOPO  
**Direct CAD command in menu/toolbar:** `DefZZTOPO`  
**Displayed shortcut(s):** `DefZZTOPO`  
**Menu location(s):** Topography &gt; Settings · Settings &gt; Settings for Layer, Color, size  
**Toolbar(s):** 19 Settings  
**Original English help:** Layer, Color, Ltype, coefficients, etc. are defined. which are initially suggested by the commands and are adapted for buildings topographic surveys.

#### `ID_DELLFIL`
**English menu label:** Delete all layer filters — DELLFIL  
**Direct CAD command in menu/toolbar:** `DELLFIL`  
**Displayed shortcut(s):** `DELLFIL`  
**Menu location(s):** Layers &gt; Modify layers  
**Toolbar(s):** 06 Layers  
**Original English help:** All LayerFilters in the Scheme are deleted.

#### `ID_DELPP`
**English menu label:** Remove vertex from pline — DELPP  
**Direct CAD command in menu/toolbar:** `DELPP`  
**Displayed shortcut(s):** `DELPP`  
**Menu location(s):** Lines &gt; Manage Polyline/Spline  
**Toolbar(s):** 05 Lines · Cadaster_Tools  
**Original English help:** Select a point anywhere on the screen and then the nearest Polyline vertex is removed.

#### `ID_DFF`
**English menu label:** Open photo — DFF  
**Direct CAD command in menu/toolbar:** `DFF`  
**Displayed shortcut(s):** `DFF`  
**Menu location(s):** Photos &gt; Open photos  
**Toolbar(s):** 17 Photos  
**Original English help:** You enter the number of the photo that opens through Windows.

#### `ID_DIMASO1`
**English menu label:** New dimensions not associated  
**Menu location(s):** Dimensions &gt; Dimensions Autocad type  
**Original English help:** The dimensions are set not to be associated with the objects to which they refer.

#### `ID_DIMASO2`
**English menu label:** Dimensions NO explode  
**Menu location(s):** Dimensions &gt; Dimensions Autocad type  
**Original English help:** The dimensions are set not to explode when importing.

#### `ID_DMLL`
**English menu label:** Refresh point list of drawing — DMLL  
**Direct CAD command in menu/toolbar:** `DMLL`  
**Displayed shortcut(s):** `DMLL`  
**Menu location(s):** Topography &gt; Settings  
**Toolbar(s):** 16 Topography  
**Original English help:** You define which blocks and based on which Attributes will the codes, for typing points, be defined .

#### `ID_DSYND`
**English menu label:** Calculations with distances and numbers — D+D  
**Direct CAD command in menu/toolbar:** `D+D`  
**Displayed shortcut(s):** `D+D`  
**Menu location(s):** Math operations and calculations &gt; Math Operations and Objects  
**Toolbar(s):** 02 Numbers  
**Original English help:** Operations with distances or numbers .

### MNU E {#mnu-e}

#### `ID_ECIRCSECTOR`
**English menu label:** Area of circle sector — ECIRCSECTOR  
**Direct CAD command in menu/toolbar:** `ECIRCSECTOR`  
**Displayed shortcut(s):** `ECIRCSECTOR`  
**Menu location(s):** Math operations and calculations &gt; Area &gt; Area measurment documentation  
**Toolbar(s):** 02 Numbers  
**Original English help:** No matching HELPSTRINGS description in this MNU. Refer to the menu label and original manual.

#### `ID_ECIRCSEG`
**English menu label:** Area of circle segment — ECIRCSEG  
**Direct CAD command in menu/toolbar:** `ECIRCSEG`  
**Displayed shortcut(s):** `ECIRCSEG`  
**Menu location(s):** Topography &gt; Survey plan...step by step &gt; 15. Property's area documentation · Math operations and calculations &gt; Area &gt; Area measurment documentation  
**Toolbar(s):** 02 Numbers · Property area documentation  
**Original English help:** No matching HELPSTRINGS description in this MNU. Refer to the menu label and original manual.

#### `ID_EF2WGS`
**English menu label:** File to WGS84 — EF2WGS  
**Direct CAD command in menu/toolbar:** `EF2WGS`  
**Displayed shortcut(s):** `EF2WGS`  
**Menu location(s):** Topography &gt; Coordinates &gt; Tranfomations  
**Original English help:** No matching HELPSTRINGS description in this MNU. Refer to the menu label and original manual.

#### `ID_EIDKLP`
**English menu label:** P : Select Z from point  
**Direct CAD command in menu/toolbar:** `Pz`  
**Toolbar(s):** Slope type  
**Original English help:** No matching HELPSTRINGS description in this MNU. Refer to the menu label and original manual.

#### `ID_ELE`
**English menu label:** Notes-1 ONN  
**Direct CAD command in menu/toolbar:** `ELE`  
**Toolbar(s):** 10 Annotations  
**Original English help:** Notes-Indications (Leader with dot).

#### `ID_ELET`
**English menu label:** Personal notes — ELE  
**Direct CAD command in menu/toolbar:** `ELET`  
**Displayed shortcut(s):** `ELE`  
**Menu location(s):** Topography &gt; Survey plan...step by step &gt; [7. Annotations · Floor plans &gt; Floor plan...step by step &gt; 5. Annotations · Sections-Elevation plans &gt; Section...step by step &gt; 9a. Other annotations · Sections-Elevation plans &gt; Elevation view...step by step &gt; 10. Annotations  
**Toolbar(s):** Rest of annotations · Annotations · Topography annotations  
**Original English help:** Indications (Leader with dot) for personal notes in the Drawing. Their layer must be closed during printing.

#### `ID_ELV`
**English menu label:** Notes-1v VNN  
**Direct CAD command in menu/toolbar:** `ELV`  
**Toolbar(s):** 10 Annotations  
**Original English help:** Notes-Indications (Leader with arrow).

#### `ID_EP2WGS`
**English menu label:** National Ref. System to WGS84 — EP2WGS  
**Direct CAD command in menu/toolbar:** `EP2WGS`  
**Displayed shortcut(s):** `EP2WGS`  
**Menu location(s):** Topography &gt; Coordinates &gt; Tranfomations  
**Original English help:** No matching HELPSTRINGS description in this MNU. Refer to the menu label and original manual.

#### `ID_EPARQ`
**English menu label:** I : Select Z  
**Toolbar(s):** Select number  
**Original English help:** Select the Z by point (Z coordinate) or object (Elevation).

#### `ID_EPARW`
**English menu label:** : Select Z by linear interpolation  
**Toolbar(s):** Select number  
**Original English help:** The Z-point is calculated by linear interpolation based on the slope of two others you choose.

#### `ID_EPEXARC`
**English menu label:** Arc  
**Direct CAD command in menu/toolbar:** `Arc`  
**Toolbar(s):** Modify 1  
**Original English help:** No matching HELPSTRINGS description in this MNU. Refer to the menu label and original manual.

#### `ID_EPEXCHCOL`
**English menu label:** Change Color  
**Direct CAD command in menu/toolbar:** `Color`  
**Toolbar(s):** Modify 1  
**Original English help:** No matching HELPSTRINGS description in this MNU. Refer to the menu label and original manual.

#### `ID_EPEXCHLAY`
**English menu label:** Change layer  
**Direct CAD command in menu/toolbar:** `layer`  
**Toolbar(s):** Modify 1  
**Original English help:** No matching HELPSTRINGS description in this MNU. Refer to the menu label and original manual.

#### `ID_EPEXCIRC`
**English menu label:** Circle  
**Direct CAD command in menu/toolbar:** `Circle`  
**Toolbar(s):** Modify 1  
**Original English help:** No matching HELPSTRINGS description in this MNU. Refer to the menu label and original manual.

#### `ID_EPEXCOPY`
**English menu label:** Copy  
**Direct CAD command in menu/toolbar:** `Copy`  
**Toolbar(s):** Modify 1  
**Original English help:** No matching HELPSTRINGS description in this MNU. Refer to the menu label and original manual.

#### `ID_EPEXCSTM`
**English menu label:** Modify Custom Linetypes — EPEXCSTM  
**Direct CAD command in menu/toolbar:** `EPEXCSTM`  
**Displayed shortcut(s):** `EPEXCSTM`  
**Menu location(s):** Lines &gt; Draw by typing command &gt; Various Lines &gt; with letters of your choice  
**Original English help:** Instructions and opening the file where you can modify your own Custom Linetypes.

#### `ID_EPEXDIST`
**English menu label:** Distance  
**Direct CAD command in menu/toolbar:** `Dist`  
**Toolbar(s):** Modify 1  
**Original English help:** No matching HELPSTRINGS description in this MNU. Refer to the menu label and original manual.

#### `ID_EPEXERASE`
**English menu label:** Erase  
**Direct CAD command in menu/toolbar:** `Erase`  
**Toolbar(s):** Modify 1  
**Original English help:** No matching HELPSTRINGS description in this MNU. Refer to the menu label and original manual.

#### `ID_EPEXEXPLODE`
**English menu label:** Explode  
**Direct CAD command in menu/toolbar:** `Explode`  
**Toolbar(s):** Modify 1  
**Original English help:** No matching HELPSTRINGS description in this MNU. Refer to the menu label and original manual.

#### `ID_EPEXEXT`
**English menu label:** Extend  
**Direct CAD command in menu/toolbar:** `Extend`  
**Toolbar(s):** Modify 1  
**Original English help:** No matching HELPSTRINGS description in this MNU. Refer to the menu label and original manual.

#### `ID_EPEXFILLET`
**English menu label:** Fillet  
**Direct CAD command in menu/toolbar:** `Fillet`  
**Toolbar(s):** Modify 1  
**Original English help:** No matching HELPSTRINGS description in this MNU. Refer to the menu label and original manual.

#### `ID_EPEXHELP`
**English menu label:** Help  
**Direct CAD command in menu/toolbar:** `Help`  
**Toolbar(s):** Modify 1  
**Original English help:** No matching HELPSTRINGS description in this MNU. Refer to the menu label and original manual.

#### `ID_EPEXLAYER`
**English menu label:** Layers  
**Toolbar(s):** Modify 1  
**Original English help:** No matching HELPSTRINGS description in this MNU. Refer to the menu label and original manual.

#### `ID_EPEXLINE`
**English menu label:** Line  
**Direct CAD command in menu/toolbar:** `Line`  
**Toolbar(s):** Modify 1  
**Original English help:** No matching HELPSTRINGS description in this MNU. Refer to the menu label and original manual.

#### `ID_EPEXMATCH`
**English menu label:** Match properties  
**Toolbar(s):** Modify 1  
**Original English help:** No matching HELPSTRINGS description in this MNU. Refer to the menu label and original manual.

#### `ID_EPEXMOVE`
**English menu label:** Move  
**Direct CAD command in menu/toolbar:** `Move`  
**Toolbar(s):** Modify 1  
**Original English help:** No matching HELPSTRINGS description in this MNU. Refer to the menu label and original manual.

#### `ID_EPEXOFFSET`
**English menu label:** Offset  
**Direct CAD command in menu/toolbar:** `Offset`  
**Toolbar(s):** Modify 1  
**Original English help:** No matching HELPSTRINGS description in this MNU. Refer to the menu label and original manual.

#### `ID_EPEXPLINE`
**English menu label:** Polyline  
**Direct CAD command in menu/toolbar:** `Pline`  
**Toolbar(s):** Modify 1  
**Original English help:** No matching HELPSTRINGS description in this MNU. Refer to the menu label and original manual.

#### `ID_EPEXREGEN`
**English menu label:** Regen  
**Direct CAD command in menu/toolbar:** `Regen`  
**Toolbar(s):** Modify 1  
**Original English help:** No matching HELPSTRINGS description in this MNU. Refer to the menu label and original manual.

#### `ID_EPEXROT`
**English menu label:** Rotate  
**Direct CAD command in menu/toolbar:** `Rotate`  
**Toolbar(s):** Modify 1  
**Original English help:** No matching HELPSTRINGS description in this MNU. Refer to the menu label and original manual.

#### `ID_EPEXSAVE`
**English menu label:** Save  
**Direct CAD command in menu/toolbar:** `Save`  
**Toolbar(s):** Modify 1  
**Original English help:** No matching HELPSTRINGS description in this MNU. Refer to the menu label and original manual.

#### `ID_EPEXSPLINE`
**English menu label:** Spline  
**Direct CAD command in menu/toolbar:** `Spline`  
**Toolbar(s):** Modify 1  
**Original English help:** No matching HELPSTRINGS description in this MNU. Refer to the menu label and original manual.

#### `ID_EPEXSTRETCH`
**English menu label:** Stretch  
**Direct CAD command in menu/toolbar:** `Stretch`  
**Toolbar(s):** Modify 1  
**Original English help:** No matching HELPSTRINGS description in this MNU. Refer to the menu label and original manual.

#### `ID_EPEXTRIM`
**English menu label:** Trim  
**Direct CAD command in menu/toolbar:** `Trim`  
**Toolbar(s):** Modify 1  
**Original English help:** No matching HELPSTRINGS description in this MNU. Refer to the menu label and original manual.

#### `ID_EPEXZOMMPR`
**English menu label:** Zoom Previous  
**Direct CAD command in menu/toolbar:** `Previous`  
**Toolbar(s):** Modify 1  
**Original English help:** No matching HELPSTRINGS description in this MNU. Refer to the menu label and original manual.

#### `ID_EPYP`
**English menu label:** @ :Go to calculations mode  
**Toolbar(s):** Calculations  
**Original English help:** No matching HELPSTRINGS description in this MNU. Refer to the menu label and original manual.

#### `ID_ERASE`
**English menu label:** Model: Delete paper symbol  
**Direct CAD command in menu/toolbar:** `erase`  
**Menu location(s):** Topography &gt; Print tiles  
**Toolbar(s):** 18a Print_Tiles  
**Original English help:** No matching HELPSTRINGS description in this MNU. Refer to the menu label and original manual.

#### `ID_ERGACHDIR`
**English menu label:** Change search path of projects database — ErgaChDir  
**Direct CAD command in menu/toolbar:** `ERGACHDIR`  
**Displayed shortcut(s):** `ErgaChDir`  
**Menu location(s):** Titles and legends &gt; T i t l e s &gt; Settings  
**Toolbar(s):** 18 Legends  
**Original English help:** You specify the address of the '' zzProjects.txt '' file which contains the names of the Projects participating in the database. The files with the fields of each Project are also created in this address. You can also specify a web address.

#### `ID_ESYNE`
**English menu label:** Calculations with areas — E+E  
**Direct CAD command in menu/toolbar:** `E+E`  
**Displayed shortcut(s):** `E+E`  
**Menu location(s):** Math operations and calculations &gt; Math Operations and Objects  
**Toolbar(s):** 02 Numbers  
**Original English help:** Operations with objects areas and\\or numbers and\\or distances.

#### `ID_ETT`
**English menu label:** Align texts — ETT  
**Direct CAD command in menu/toolbar:** `ETT`  
**Displayed shortcut(s):** `ETT`  
**Menu location(s):** Text &gt; Edit text  
**Toolbar(s):** 04 Texts  
**Original English help:** Alignment of texts along the X or Y axis. The texts selected for alignment are moved (by their base point) only by X or Y, depending on the desired axis.

### MNU F {#mnu-f}

#### `ID_F2T`
**English menu label:** Import text from file — F2T  
**Direct CAD command in menu/toolbar:** `F2T`  
**Displayed shortcut(s):** `F2T`  
**Menu location(s):** Text &gt; Edit text  
**Toolbar(s):** 04 Texts  
**Original English help:** You select a file which is inserted as text on the screen.

#### `ID_FFCHDIR`
**English menu label:** Set photos folder path — FFCHDIR  
**Direct CAD command in menu/toolbar:** `FFCHDIR`  
**Displayed shortcut(s):** `FFCHDIR`  
**Menu location(s):** Photos &gt; Open photos  
**Toolbar(s):** 17 Photos  
**Original English help:** Select the folder that contains the photos that will be opened with the DFF command.

### MNU G {#mnu-g}

#### `ID_GD`
**English menu label:** Extend line — GD  
**Direct CAD command in menu/toolbar:** `GD`  
**Displayed shortcut(s):** `GD`  
**Menu location(s):** Lines  
**Toolbar(s):** 05 Lines  
**Original English help:** Enter the desired length (delta) by a number or distance on screen and then select the objects that will be lengthened by this distance.

#### `ID_GRPO`
**English menu label:** 3c. Storey slab or floor — GRPO  
**Direct CAD command in menu/toolbar:** `GRPO`  
**Displayed shortcut(s):** `GRPO`  
**Menu location(s):** Sections-Elevation plans &gt; Elevation view...step by step  
**Toolbar(s):** 14 Sections_Elevations · 14b Elevation step by step  
**Original English help:** You select through calculations or operations the desired Y (N) and then a line is Result with start and end of your choice.

#### `ID_GRSX`
**English menu label:** Line with same X in both ends — GGX · Line with same X at both ends — GGX  
**Direct CAD command in menu/toolbar:** `GGX`  
**Displayed shortcut(s):** `GGX`  
**Menu location(s):** Sections-Elevation plans &gt; Section...step by step &gt; 3a. Section Drawing Tools · Sections-Elevation plans &gt; Elevation view...step by step &gt; 3a. Elevation Drawing tools · Lines  
**Toolbar(s):** 05 Lines · 14 Sections_Elevations · Tools for section and elevation plans  
**Original English help:** Line with same X at both ends. You select or enter or calculate the desired X and then draw lines with Y of the points you select and X the desired.

#### `ID_GRSY`
**English menu label:** Line with same Y at both ends — GGY  
**Direct CAD command in menu/toolbar:** `GGY`  
**Displayed shortcut(s):** `GGY`  
**Menu location(s):** Sections-Elevation plans &gt; Section...step by step &gt; 3a. Section Drawing Tools · Sections-Elevation plans &gt; Elevation view...step by step &gt; 3a. Elevation Drawing tools · Lines  
**Toolbar(s):** 05 Lines · 14 Sections_Elevations · Tools for section and elevation plans  
**Original English help:** Line with same Y at both ends. You select or enter or calculate the desired Y and then draw lines with X of the points you select and Y the desired.

#### `ID_GRY0`
**English menu label:** 2. Line at 0.00 — GRY0  
**Direct CAD command in menu/toolbar:** `GRY0`  
**Displayed shortcut(s):** `GRY0`  
**Menu location(s):** Sections-Elevation plans &gt; Section...step by step · Sections-Elevation plans &gt; Elevation view...step by step  
**Toolbar(s):** 14 Sections_Elevations · 14a Section  step by step · 14b Elevation step by step  
**Original English help:** A line is Result at Y (N) = 0.00 with the start and end of your choice.

#### `ID_GRY1`
**English menu label:** Rising line to a Y — GG1  
**Direct CAD command in menu/toolbar:** `GG1`  
**Displayed shortcut(s):** `GG1`  
**Menu location(s):** Sections-Elevation plans &gt; Section...step by step &gt; 3a. Section Drawing Tools · Sections-Elevation plans &gt; Elevation view...step by step &gt; 3a. Elevation Drawing tools  
**Toolbar(s):** 14 Sections_Elevations · Tools for section and elevation plans  
**Original English help:** Select the desired Y and then for each point you select on the screen a vertical line is Result up to the desired Y.

#### `ID_GT`
**English menu label:** Total length — GT  
**Direct CAD command in menu/toolbar:** `GT`  
**Displayed shortcut(s):** `GT`  
**Menu location(s):** Lines  
**Toolbar(s):** 05 Lines  
**Original English help:** Enter the desired length with a number or dimension on the screen and then select the objects that will reach this length.

### MNU H {#mnu-h}

#### `ID_HDXAD`
**English menu label:** Hatch UF: Other old usage but forest today HDXAD  
**Direct CAD command in menu/toolbar:** `HDXAD`  
**Toolbar(s):** 21 FOREST  
**Original English help:** No matching HELPSTRINGS description in this MNU. Refer to the menu label and original manual.

#### `ID_HDXAN`
**English menu label:** Hatch RF: Reforestable or wooded areas HDXAN  
**Direct CAD command in menu/toolbar:** `HDXAN`  
**Toolbar(s):** 21 FOREST  
**Original English help:** No matching HELPSTRINGS description in this MNU. Refer to the menu label and original manual.

#### `ID_HDXAX`
**English menu label:** Hatch UG: Other old usage but grassland today HDXAX  
**Direct CAD command in menu/toolbar:** `HDXAX`  
**Toolbar(s):** 21 FOREST  
**Original English help:** No matching HELPSTRINGS description in this MNU. Refer to the menu label and original manual.

#### `ID_HDXDA`
**English menu label:** Hatch FU: Old forest with other usage today HDXDA  
**Direct CAD command in menu/toolbar:** `HDXDA`  
**Toolbar(s):** 21 FOREST  
**Original English help:** No matching HELPSTRINGS description in this MNU. Refer to the menu label and original manual.

#### `ID_HDXDD`
**English menu label:** Hatch FF: Old forest still forest today HDXDD  
**Direct CAD command in menu/toolbar:** `HDXDD`  
**Toolbar(s):** 21 FOREST  
**Original English help:** No matching HELPSTRINGS description in this MNU. Refer to the menu label and original manual.

#### `ID_HDXPD`
**English menu label:** Hatch FD: Forest by administrative decision HDXPD  
**Direct CAD command in menu/toolbar:** `HDXPD`  
**Toolbar(s):** 21 FOREST  
**Original English help:** No matching HELPSTRINGS description in this MNU. Refer to the menu label and original manual.

#### `ID_HDXPX`
**English menu label:** Hatch GD: Grassland by administrative decision HDXPX  
**Direct CAD command in menu/toolbar:** `HDXPX`  
**Toolbar(s):** 21 FOREST  
**Original English help:** No matching HELPSTRINGS description in this MNU. Refer to the menu label and original manual.

#### `ID_HDXXA`
**English menu label:** Hatch GU: Old grassland with other usage today HDXXA  
**Direct CAD command in menu/toolbar:** `HDXXA`  
**Toolbar(s):** 21 FOREST  
**Original English help:** No matching HELPSTRINGS description in this MNU. Refer to the menu label and original manual.

#### `ID_HDXXX`
**English menu label:** Hatch GG: Old grassland still grassland today HDXXX  
**Direct CAD command in menu/toolbar:** `HDXXX`  
**Toolbar(s):** 21 FOREST  
**Original English help:** No matching HELPSTRINGS description in this MNU. Refer to the menu label and original manual.

#### `ID_HGR`
**English menu label:** Grass — HGR  
**Direct CAD command in menu/toolbar:** `hgr`, `HGR`  
**Displayed shortcut(s):** `HGR`  
**Menu location(s):** Topography &gt; Survey plan...step by step &gt; 5. Hatch for ground · Hatch &gt; By typing &gt; Ground  
**Toolbar(s):** 07 Hatch · Ground and area hatch  
**Original English help:** Hatch an area that is covered with Grass. Select another with ZHH command.

#### `ID_HH0`
**English menu label:** Gray-0 — HH0  
**Direct CAD command in menu/toolbar:** `hh0`, `HH0`  
**Displayed shortcut(s):** `HH0`  
**Menu location(s):** Hatch &gt; By typing &gt; Solid  
**Toolbar(s):** 07 Hatch  
**Original English help:** Solid Hatch Gray color 250. View this Hatch type or select another with the ZHI command.

#### `ID_HH1`
**English menu label:** Gray-1 — HH1  
**Direct CAD command in menu/toolbar:** `hh1`, `HH1`  
**Displayed shortcut(s):** `HH1`  
**Menu location(s):** Hatch &gt; By typing &gt; Solid  
**Toolbar(s):** 07 Hatch  
**Original English help:** Solid Hatch Gray color 251. View this Hatch type or select another with the ZHI command.

#### `ID_HH2`
**English menu label:** Gray-2 — HH2  
**Direct CAD command in menu/toolbar:** `hh2`, `HH2`  
**Displayed shortcut(s):** `HH2`  
**Menu location(s):** Hatch &gt; By typing &gt; Solid  
**Toolbar(s):** 07 Hatch  
**Original English help:** Solid Hatch Gray color 252. View this Hatch type or select another with the ZHI command.

#### `ID_HH3`
**English menu label:** Gray-3 — HH3  
**Direct CAD command in menu/toolbar:** `hh3`, `HH3`  
**Displayed shortcut(s):** `HH3`  
**Menu location(s):** Hatch &gt; By typing &gt; Solid  
**Toolbar(s):** 07 Hatch  
**Original English help:** Solid Hatch Gray color 253. View this Hatch type or select another with the ZHI command.

#### `ID_HH4`
**English menu label:** Gray-4 — HH4  
**Direct CAD command in menu/toolbar:** `hh4`, `HH4`  
**Displayed shortcut(s):** `HH4`  
**Menu location(s):** Hatch &gt; By typing &gt; Solid  
**Toolbar(s):** 07 Hatch  
**Original English help:** Solid Hatch Gray color 254. View this Hatch type or select another with the ZHI command.

#### `ID_HHA`
**English menu label:** Location hatch — HHA · Delineation hatch for localization — HHA  
**Direct CAD command in menu/toolbar:** `hha`, `HHA`  
**Displayed shortcut(s):** `HHA`  
**Menu location(s):** Topography &gt; Survey plan...step by step &gt; 19. Image excerpts &gt; Step by step · Hatch &gt; By typing &gt; Delineation hatch  
**Toolbar(s):** 07 Hatch · Excerpts  
**Original English help:** Hatch for location in wider areas (delineation type). View this type of Hatch or select another with the ZHI command.

#### `ID_HHBLUE`
**English menu label:** Blue — HHBLUE  
**Direct CAD command in menu/toolbar:** `HHBLUE`  
**Displayed shortcut(s):** `HHBLUE`  
**Menu location(s):** Hatch &gt; By typing &gt; Solid  
**Toolbar(s):** 07 Hatch  
**Original English help:** Solid Hatch Blue. Select another with ZHH command.

#### `ID_HHD`
**English menu label:** Mark an area — HHD · Mark an area area — HHD  
**Direct CAD command in menu/toolbar:** `hhd`, `HHD`  
**Displayed shortcut(s):** `HHD`  
**Menu location(s):** Topography &gt; Survey plan...step by step &gt; 5. Hatch for ground · Hatch &gt; By typing &gt; Delineation hatch  
**Toolbar(s):** 07 Hatch · Ground and area hatch  
**Original English help:** Hatch usually for Coverage (delineation type). View this type of Hatch or select another with the ZHI command.

#### `ID_HHG`
**English menu label:** Shading of structural elements — HHG · 10. Shading of structural elements — HHG  
**Direct CAD command in menu/toolbar:** `hhg`, `HHG`  
**Displayed shortcut(s):** `HHG`  
**Menu location(s):** Floor plans &gt; Floor plan...step by step &gt; 9. Floor plan hatch · Sections-Elevation plans &gt; Section...step by step · Hatch &gt; By typing &gt; Solid  
**Toolbar(s):** 07 Hatch · 14a Section  step by step · 14b Elevation step by step · 15a Floor plan step by step · 15 Floor Plans  
**Original English help:** Solid hatch gray: For section of structural elements for floor plans and sections that usually do not separate bearings and columns from walls. See this type of Hatch or select another with the ZHI command.

#### `ID_HHGREEN`
**English menu label:** Green — HHGREEN  
**Direct CAD command in menu/toolbar:** `HHGREEN`  
**Displayed shortcut(s):** `HHGREEN`  
**Menu location(s):** Hatch &gt; By typing &gt; Solid  
**Toolbar(s):** 07 Hatch  
**Original English help:** Solid Hatch Green. View this type of Hatch or select another with the ZHI command.

#### `ID_HHH`
**English menu label:** Hatch for bearing struction — HHH · 10. Hatch for bearing struction — HHH · 11b. Hatch delineation type — HHH · Delineation hatch for bearing structure — HHH  
**Direct CAD command in menu/toolbar:** `hhh`, `HHH`  
**Displayed shortcut(s):** `HHH`  
**Menu location(s):** Floor plans &gt; Floor plan...step by step &gt; 9. Floor plan hatch · Sections-Elevation plans &gt; Section...step by step · Sections-Elevation plans &gt; Elevation view...step by step · Hatch &gt; By typing &gt; Delineation hatch  
**Toolbar(s):** 07 Hatch · 14a Section  step by step · 14b Elevation step by step · 15a Floor plan step by step · 15 Floor Plans  
**Original English help:** Bearing layout for floor plan, section, etc. (delineation type). See this type of Hatch or select another with the ZHI command.

#### `ID_HHP`
**English menu label:** Flowerbed-soil — HHP  
**Direct CAD command in menu/toolbar:** `hhp`, `HHP`  
**Displayed shortcut(s):** `HHP`  
**Menu location(s):** Topography &gt; Survey plan...step by step &gt; 5. Hatch for ground · Hatch &gt; By typing &gt; Ground  
**Toolbar(s):** 07 Hatch · Ground and area hatch  
**Original English help:** Hatch (soil type) for landscaped areas with low vegetation such as flower beds, garden, etc. View this type of Hatch or select another with the ZHI command.

#### `ID_HHRED`
**English menu label:** Red — HHRED  
**Direct CAD command in menu/toolbar:** `HHRED`  
**Displayed shortcut(s):** `HHRED`  
**Menu location(s):** Hatch &gt; By typing &gt; Solid  
**Toolbar(s):** 07 Hatch  
**Original English help:** Solid Hatch Red. See this type of Hatch or select another with the ZHI command.

#### `ID_HHT`
**English menu label:** Mark area by dots — HHT  
**Direct CAD command in menu/toolbar:** `hht`, `HHT`  
**Displayed shortcut(s):** `HHT`  
**Menu location(s):** Topography &gt; Survey plan...step by step &gt; 5. Hatch for ground · Hatch &gt; By typing &gt; Ground  
**Toolbar(s):** 07 Hatch · Ground and area hatch  
**Original English help:** Hatch for differentiation of areas (dots). See this type of Hatch or select another with the ZHI command.

#### `ID_HHYEL`
**English menu label:** Yellow — HHYEL  
**Direct CAD command in menu/toolbar:** `HHYEL`  
**Displayed shortcut(s):** `HHYEL`  
**Menu location(s):** Hatch &gt; By typing &gt; Solid  
**Toolbar(s):** 07 Hatch  
**Original English help:** Solid Hatch Yellow. See this type of Hatch or select another with the ZHI command.

#### `ID_HKAR`
**English menu label:** Stone slates — HKAR · ''Karystos '' stone plates — HKAR  
**Direct CAD command in menu/toolbar:** `hkar`  
**Displayed shortcut(s):** `HKAR`  
**Menu location(s):** Topography &gt; Survey plan...step by step &gt; 5. Hatch for ground · Hatch &gt; By typing &gt; Size 1:1  
**Original English help:** Hatch Karystos slabs. See this type of Hatch or select another with the ZHI command.

#### `ID_HKER`
**English menu label:** 12a. Roof tiles — HKER · Roof tiles — HKER  
**Direct CAD command in menu/toolbar:** `HKER`  
**Displayed shortcut(s):** `HKER`  
**Menu location(s):** Sections-Elevation plans &gt; Elevation view...step by step · Hatch &gt; By typing &gt; Size 1:1  
**Toolbar(s):** 07 Hatch · 14b Elevation step by step  
**Original English help:** Hatch Tiles that correspond to the symbols of the rest of the roof (ASD command). See other types of Hatch with the ZHI command.

#### `ID_HKT`
**English menu label:** Building Hatch (closed area) — HKT  
**Direct CAD command in menu/toolbar:** `HKT`  
**Displayed shortcut(s):** `HKT`  
**Menu location(s):** Topography &gt; Survey plan...step by step &gt; 4. Building  
**Toolbar(s):** Building hatch and floors ind. · 16 Topography  
**Original English help:** You select a center point the closed area and Polyline is automatically Result with a type of building partial delineation line.

#### `ID_HPEL`
**English menu label:** Paving stones — HPEL · Paving Stones — HPEL  
**Direct CAD command in menu/toolbar:** `hpel`  
**Displayed shortcut(s):** `HPEL`  
**Menu location(s):** Topography &gt; Survey plan...step by step &gt; 5. Hatch for ground · Hatch &gt; By typing &gt; Size 1:1  
**Original English help:** Hatch Chipped Stones. See this type of Hatch or select another with the ZHI command.

#### `ID_HPL1`
**English menu label:** Paving 1 — HPL1  
**Direct CAD command in menu/toolbar:** `hpl1`  
**Displayed shortcut(s):** `HPL1`  
**Menu location(s):** Topography &gt; Survey plan...step by step &gt; 5. Hatch for ground · Hatch &gt; By typing &gt; Size 1:1  
**Original English help:** Hatch Paving 1. View this type of Hatch or select another with the ZHI command.

#### `ID_HPL2`
**English menu label:** Paving 2 — HPL2  
**Direct CAD command in menu/toolbar:** `hpl2`  
**Displayed shortcut(s):** `HPL2`  
**Menu location(s):** Topography &gt; Survey plan...step by step &gt; 5. Hatch for ground · Hatch &gt; By typing &gt; Size 1:1  
**Original English help:** Hatch Paving 2. View this Hatch type or select another with the ZHI command.

#### `ID_HPL3`
**English menu label:** Sidewalk plates — HPL3  
**Direct CAD command in menu/toolbar:** `hpl3`  
**Displayed shortcut(s):** `HPL3`  
**Menu location(s):** Topography &gt; Survey plan...step by step &gt; 5. Hatch for ground · Hatch &gt; By typing &gt; Size 1:1  
**Original English help:** Hatch Pavement Slabs. View this type of Hatch or select another with the ZHI command.

#### `ID_HPOES`
**English menu label:** Moss — HPOES  
**Direct CAD command in menu/toolbar:** `HPOES`  
**Displayed shortcut(s):** `HPOES`  
**Menu location(s):** Topography &gt; Survey plan...step by step &gt; 5. Hatch for ground · Hatch &gt; By typing &gt; Ground  
**Toolbar(s):** 07 Hatch · Ground and area hatch  
**Original English help:** Hatch in an area with vegetation type Poes. View this type of Hatch or select another with the ZHI command.

#### `ID_HTHAM`
**English menu label:** Shrubs, plants e.t.c. — HTHAM · Shrubs Plants e.t.c. — HTHAM  
**Direct CAD command in menu/toolbar:** `HTHAM`  
**Displayed shortcut(s):** `HTHAM`  
**Menu location(s):** Topography &gt; Survey plan...step by step &gt; 5. Hatch for ground · Hatch &gt; By typing &gt; Ground  
**Toolbar(s):** 07 Hatch · Ground and area hatch  
**Original English help:** Hatch an area with vegetation type Shrubs Plants etc. See this type of Hatch or select another with the ZHI command.

### MNU I {#mnu-i}

#### `ID_II2P`
**Original English help:** Compound of heights in polylines. This command is now integrated into ZDTMISO, and no longer needs to be executed.

#### `ID_IIJ`
**English menu label:** 1. Calculation and temporary mapping — IIJ  
**Direct CAD command in menu/toolbar:** `IIJ`  
**Displayed shortcut(s):** `IIJ`  
**Menu location(s):** Topography &gt; Triangles - Contours - Volume &gt; Contours  
**Original English help:** When using the command for the first time: Select the triangles you want and the Equalities are temporarily calculated and Result. In each subsequent use of the command, the Equalities are temporarily recalculated and redesigned with all the changes made to the triangles through the sdbox commands.

#### `ID_IIJK`
**English menu label:** 2. Temporary mapping (quick) — IIJK  
**Direct CAD command in menu/toolbar:** `IIJK`  
**Displayed shortcut(s):** `IIJK`  
**Menu location(s):** Topography &gt; Triangles - Contours - Volume &gt; Contours  
**Toolbar(s):** 16b Triangles contours  
**Original English help:** Quick temporary drawing of Isosceles with the Triangles you selected during the last use of the IIJ or IIJR.

#### `ID_IIJR`
**English menu label:** 3. Recalculation of temporary contours — IIJR  
**Direct CAD command in menu/toolbar:** `IIJR`  
**Displayed shortcut(s):** `IIJR`  
**Menu location(s):** Topography &gt; Triangles - Contours - Volume &gt; Contours  
**Toolbar(s):** 16b Triangles contours  
**Original English help:** Recalculation of temporary contours new selection of triangles.

#### `ID_IIV`
**English menu label:** 9. On-off contours — IIV  
**Direct CAD command in menu/toolbar:** `IIV`  
**Displayed shortcut(s):** `IIV`  
**Menu location(s):** Topography &gt; Triangles - Contours - Volume &gt; Contours  
**Toolbar(s):** 16b Triangles contours  
**Original English help:** The layers of contours '' DTM_ISO-K '', '' DTM_ISO-B '', '' DTM_ISO-D '', '' DTM_ISO-Txt '', for view of the drawing with or without contours, open and close.

#### `ID_IP2L`
**English menu label:** 6. Remove smoothing — IP2L  
**Direct CAD command in menu/toolbar:** `IP2L`  
**Displayed shortcut(s):** `IP2L`  
**Menu location(s):** Topography &gt; Triangles - Contours - Volume &gt; Contours  
**Toolbar(s):** 16b Triangles contours  
**Original English help:** Level smoothing removal when they reappear as Polylines. You can normalize them again at any time with IP2S.

#### `ID_IP2S`
**English menu label:** 5. Smoothing contours — IP2S  
**Direct CAD command in menu/toolbar:** `IP2S`  
**Displayed shortcut(s):** `IP2S`  
**Menu location(s):** Topography &gt; Triangles - Contours - Volume &gt; Contours  
**Toolbar(s):** 16b Triangles contours  
**Original English help:** Leveling: The Polylines of the heights are smoothed and look like Splines while remaining Polylines. You can remove the smoothing with the IP2L command.

#### `ID_ITAX`
**English menu label:** 2. Insert points from coordinates file — ITAX · Insert points — ITAX  
**Direct CAD command in menu/toolbar:** `ITAX`  
**Displayed shortcut(s):** `ITAX`  
**Menu location(s):** Topography &gt; Survey plan...step by step · Sections-Elevation plans &gt; Points  
**Toolbar(s):** 14a Section  step by step · 14b Elevation step by step · 16a Survey plan step by step · 16 Topography  
**Original English help:** Import block or other objects into the Drawing from a coordinate file.

### MNU K {#mnu-k}

#### `ID_KATTOMI`
**English menu label:** Section guidelines — KTM  
**Direct CAD command in menu/toolbar:** `ktm`  
**Displayed shortcut(s):** `KTM`  
**Menu location(s):** Floor plans &gt; Floor plan...step by step &gt; 5. Annotations  
**Original English help:** No matching HELPSTRINGS description in this MNU. Refer to the menu label and original manual.

#### `ID_KEGSA`
**English menu label:** Greek grid scale factor — KEGSA  
**Direct CAD command in menu/toolbar:** `KEGSA`  
**Displayed shortcut(s):** `KEGSA`  
**Menu location(s):** Topography &gt; Survey plan...step by step &gt; 11. Grid  
**Toolbar(s):** Grid -System details · 16 Topography  
**Original English help:** Calculation of greek EGSA scale factor by selecting a point on the screen.

#### `ID_KL`
**English menu label:** Slope calculation — KL  
**Direct CAD command in menu/toolbar:** `KL`  
**Displayed shortcut(s):** `KL`  
**Menu location(s):** Math operations and calculations  
**Toolbar(s):** 02 Numbers  
**Original English help:** Slope calculation between 2 points giving for each numeric value or selecting a number from the drawing (text or block) or selecting a point's Z coordinate. Once the slope is calculated, you have data for new points.

#### `ID_KLAY`
**English menu label:** Insert single floor layers — KLAY  
**Direct CAD command in menu/toolbar:** `KLAY`  
**Displayed shortcut(s):** `KLAY`  
**Menu location(s):** Floor plans &gt; Floor plan...step by step &gt; 1. Floor plan Layers  
**Toolbar(s):** 15a Floor plan step by step  
**Original English help:** The usual layers for floor plan design are imported. You will be asked to select floor's abbreviation with 3 letters, which is usefull if you use AutoCAD's LMAN command.

#### `ID_KLH`
**English menu label:** Interpretation of floor plan layers KLH  
**Direct CAD command in menu/toolbar:** `KLH`  
**Toolbar(s):** 15a Floor plan step by step  
**Original English help:** Opens the file with descriptions for the floor layers that are imported with KLAY command.

#### `ID_KLIMAKA`
**Original English help:** Print Scale. It is about the size and adjustments that need to be set for obects like texts, blocks, lines (non continue), dimensions etc, for quality printing results.

#### `ID_KN`
**English menu label:** Insert spaces in text — KN  
**Direct CAD command in menu/toolbar:** `KN`  
**Displayed shortcut(s):** `KN`  
**Menu location(s):** Text &gt; Edit text  
**Toolbar(s):** 04 Texts  
**Original English help:** Add spaces between each digit of each word in a single sentence. Gradually increase or decrease length of a text that you select.

#### `ID_KNB`
**English menu label:** Grid crossings — KNB  
**Direct CAD command in menu/toolbar:** `KNB`  
**Displayed shortcut(s):** `KNB`  
**Menu location(s):** Topography &gt; Survey plan...step by step &gt; 11. Grid  
**Toolbar(s):** Grid -System details · 16 Topography  
**Original English help:** You select 2 points and a grid is designed depending on the print scale.

#### `ID_KNBFT`
**English menu label:** Coordinates display size factor — KNBFT  
**Direct CAD command in menu/toolbar:** `KNBFT`  
**Displayed shortcut(s):** `KNBFT`  
**Menu location(s):** Topography &gt; Survey plan...step by step &gt; 11. Grid  
**Toolbar(s):** Grid -System details · 16 Topography  
**Original English help:** Choose a size coefficient for the texts that list the coordinates of the grid in case you want different from the default which is 1.000

#### `ID_KNBK`
**English menu label:** Land registry grid — KNBK  
**Direct CAD command in menu/toolbar:** `KNBK`  
**Displayed shortcut(s):** `KNBK`  
**Menu location(s):** Topography &gt; Survey plan...step by step &gt; 11. Grid  
**Toolbar(s):** Grid -System details · 16 Topography  
**Original English help:** You select 2 points and the frame, the grid, and the steps of the grid are Result on all 4 sides as in the passages of the Land Registry.

#### `ID_KNBS`
**English menu label:** Full grid — KNBS · Layout: Full grid — KNBS  
**Direct CAD command in menu/toolbar:** `KNBS`  
**Displayed shortcut(s):** `KNBS`  
**Menu location(s):** Topography &gt; Survey plan...step by step &gt; 11. Grid · Topography &gt; Print tiles  
**Toolbar(s):** Grid -System details · 16 Topography · 18a Print_Tiles  
**Original English help:** You select 2 points and draw the frame, the grid, the coordinates of the 4 vertices and the steps of the grid on all 4 sides.

#### `ID_KNBT`
**English menu label:** Grid coordinates — KNBT  
**Direct CAD command in menu/toolbar:** `KNBT`  
**Displayed shortcut(s):** `KNBT`  
**Menu location(s):** Topography &gt; Survey plan...step by step &gt; 11. Grid  
**Toolbar(s):** Grid -System details · 16 Topography  
**Original English help:** Select the points on the grid where you want the coordinates to be written.

#### `ID_KTLMAN`
**English menu label:** Layers - Lman of multi storey building and layer filters — KTLMAN  
**Direct CAD command in menu/toolbar:** `ktlman`, `KTLMAN`  
**Displayed shortcut(s):** `KTLMAN`  
**Menu location(s):** Floor plans &gt; Floor plan...step by step &gt; 1. Floor plan Layers  
**Toolbar(s):** 15a Floor plan step by step  
**Original English help:** The standard layers of all levels of a high-rise building, the corresponding LMANs and the corresponding filters are imported.

#### `ID_KTOMH`
**English menu label:** Section guidelines KTM  
**Direct CAD command in menu/toolbar:** `KTM`  
**Toolbar(s):** 15a Floor plan step by step · 15 Floor Plans  
**Original English help:** You select position, direction and name of the section-mark and then line segments are Result at the ends, direction arrows and the name.

#### `ID_KTT`
**English menu label:** Distance between (sinlge) text lines — KTT  
**Direct CAD command in menu/toolbar:** `KTT`  
**Displayed shortcut(s):** `KTT`  
**Menu location(s):** Text &gt; Edit text  
**Toolbar(s):** 04 Texts  
**Original English help:** Place multiple lines of text in standard distance between them or at custom distances.

### MNU L {#mnu-l}

#### `ID_LABR`
**English menu label:** X open veranda — LABR / PABR · X open Veranda — LABR / PABR  
**Direct CAD command in menu/toolbar:** `LABR`  
**Displayed shortcut(s):** `LABR / PABR`  
**Menu location(s):** Topography &gt; Survey plan...step by step &gt; 3. Current plot layout &gt; Constructions &gt; Veranda · Lines &gt; Draw by typing command &gt; Basic line for Topography and Maps &gt; Constructions &gt; Veranda  
**Original English help:** Line, pline or arc for X open veranda. When the terrace is open (facing the sky) this is indicated by hidden lines that cross its ends.

#### `ID_LAIG`
**English menu label:** Coast line — LAIG / PAIG  
**Direct CAD command in menu/toolbar:** `LAIG`  
**Displayed shortcut(s):** `LAIG / PAIG`  
**Menu location(s):** Topography &gt; Survey plan...step by step &gt; 13. Mapping legislation lines · Lines &gt; Draw by typing command &gt; Basic line for Topography and Maps &gt; Urban Planning  
**Original English help:** Line, pline or arc for foreseen Aegialos border.

#### `ID_LAKT`
**English menu label:** Coastline — LAKT / PAKT  
**Direct CAD command in menu/toolbar:** `LAKT`  
**Displayed shortcut(s):** `LAKT / PAKT`  
**Menu location(s):** Topography &gt; Survey plan...step by step &gt; 3. Current plot layout &gt; Roads - Limits - Boundaries · Lines &gt; Draw by typing command &gt; Basic line for Topography and Maps &gt; Roads - Lines - Boundaries  
**Original English help:** Line, pline or arc for shoreline (water)

#### `ID_LANB`
**English menu label:** Steps — LANB /PANB  
**Direct CAD command in menu/toolbar:** `LANB`  
**Displayed shortcut(s):** `LANB /PANB`  
**Menu location(s):** Topography &gt; Survey plan...step by step &gt; 3. Current plot layout &gt; Constructions · Lines &gt; Draw by typing command &gt; Basic line for Topography and Maps &gt; Constructions  
**Original English help:** Line, pline or arc for Upgrades. (floor steps, concrete pavement boundaries, level changes ...)

#### `ID_LAPL`
**English menu label:** Expropriation boundary — LAPL / PAPL  
**Direct CAD command in menu/toolbar:** `LAPL`  
**Displayed shortcut(s):** `LAPL / PAPL`  
**Menu location(s):** Topography &gt; Survey plan...step by step &gt; 13. Mapping legislation lines · Lines &gt; Draw by typing command &gt; Basic line for Topography and Maps &gt; Urban Planning  
**Original English help:** Line, pline or arc for Expropriation Limit.

#### `ID_LARX`
**English menu label:** Archaiological site — LARX / PARX  
**Direct CAD command in menu/toolbar:** `LARX`  
**Displayed shortcut(s):** `LARX / PARX`  
**Menu location(s):** Topography &gt; Survey plan...step by step &gt; 13. Mapping legislation lines · Lines &gt; Draw by typing command &gt; Basic line for Topography and Maps &gt; Urban Planning  
**Original English help:** Line, pline or arc for Archaeological Site.

#### `ID_LASTRA`
**English menu label:** Stars — LASTRA / PASTRA  
**Direct CAD command in menu/toolbar:** `PASTRA`  
**Displayed shortcut(s):** `LASTRA / PASTRA`  
**Menu location(s):** Lines &gt; Draw by typing command &gt; Various Lines &gt; Symbols Lines — # # # # # # &gt; only Symbols &gt; Squares,Circles,Rhombus,Stars,Crosses,Addition,Multiplication,Arrows  
**Original English help:** Line, pline or arc for Stars. See the line with the ZLL command.

#### `ID_LASTRA2`
**English menu label:** Stars (small space) — LASTRA2 / PASTRA2  
**Direct CAD command in menu/toolbar:** `PASTRA2`  
**Displayed shortcut(s):** `LASTRA2 / PASTRA2`  
**Menu location(s):** Lines &gt; Draw by typing command &gt; Various Lines &gt; Symbols Lines — # # # # # # &gt; only Symbols &gt; Squares,Circles,Rhombus,Stars,Crosses,Addition,Multiplication,Arrows  
**Original English help:** Line, pline or arc for Stars (with small gaps). See the line with the ZLL command.

#### `ID_LASTRA3`
**English menu label:** Stars (no space) — LASTRA3 / PASTRA3  
**Direct CAD command in menu/toolbar:** `PASTRA3`  
**Displayed shortcut(s):** `LASTRA3 / PASTRA3`  
**Menu location(s):** Lines &gt; Draw by typing command &gt; Various Lines &gt; Symbols Lines — # # # # # # &gt; only Symbols &gt; Squares,Circles,Rhombus,Stars,Crosses,Addition,Multiplication,Arrows  
**Original English help:** Line, pline or arc for Stars (no gaps). See the line with the ZLL command.

#### `ID_LAXON`
**English menu label:** Axis — LAXON / PAXON  
**Direct CAD command in menu/toolbar:** `LAXON`  
**Displayed shortcut(s):** `LAXON / PAXON`  
**Menu location(s):** Lines &gt; Draw by typing command &gt; Various Lines &gt; Axis — __ . __ . __ &gt; __ . __ . __ . __ .  
**Original English help:** Line, pline or arc for Axis.

#### `ID_LBET`
**English menu label:** Beton edge — LBET / PBET  
**Direct CAD command in menu/toolbar:** `LBET`  
**Displayed shortcut(s):** `LBET / PBET`  
**Menu location(s):** Topography &gt; Survey plan...step by step &gt; 3. Current plot layout &gt; Roads - Limits - Boundaries · Lines &gt; Draw by typing command &gt; Basic line for Topography and Maps &gt; Roads - Lines - Boundaries  
**Original English help:** No matching HELPSTRINGS description in this MNU. Refer to the menu label and original manual.

#### `ID_LBGDE`
**English menu label:** Application map help lines — LBGDE / PBGDE  
**Direct CAD command in menu/toolbar:** `LBGDE`  
**Displayed shortcut(s):** `LBGDE / PBGDE`  
**Menu location(s):** Topography &gt; Survey plan...step by step &gt; 13. Mapping legislation lines · Lines &gt; Draw by typing command &gt; Basic line for Topography and Maps &gt; Urban Planning  
**Original English help:** Line, pline or arc for Auxiliary lines for the application

#### `ID_LBGP`
**English menu label:** Street plan helping lines\\LBGP / PBGP · Street plan helping lines — LBGP / PBGP  
**Direct CAD command in menu/toolbar:** `LBGP`  
**Displayed shortcut(s):** `LBGP / PBGP`  
**Menu location(s):** Topography &gt; Survey plan...step by step &gt; 13. Mapping legislation lines · Lines &gt; Draw by typing command &gt; Basic line for Topography and Maps &gt; Urban Planning  
**Original English help:** Line, pline or arc for Auxiliary lines for the Roadfront application.

#### `ID_LBLAST`
**English menu label:** Plantation limit — LBLAST / PBLAST · Plants edge — LBLAST / PBLAST  
**Direct CAD command in menu/toolbar:** `LBLAST`  
**Displayed shortcut(s):** `LBLAST / PBLAST`  
**Menu location(s):** Topography &gt; Survey plan...step by step &gt; 3. Current plot layout &gt; Roads - Limits - Boundaries · Lines &gt; Draw by typing command &gt; Basic line for Topography and Maps &gt; Roads - Lines - Boundaries  
**Original English help:** Line, pline or arc for dense or distinct vegetation boundaries.

#### `ID_LBLE`
**English menu label:** Block boundary blue — LBLE / PBLE  
**Direct CAD command in menu/toolbar:** `LBLE`  
**Displayed shortcut(s):** `LBLE / PBLE`  
**Menu location(s):** Topography &gt; Survey plan...step by step &gt; 13. Mapping legislation lines · Lines &gt; Draw by typing command &gt; Basic line for Topography and Maps &gt; Urban Planning  
**Original English help:** Line, pline or arc for Blue OT separator.

#### `ID_LBR`
**English menu label:** Veranda — LBR / PBR  
**Direct CAD command in menu/toolbar:** `LBR`  
**Displayed shortcut(s):** `LBR / PBR`  
**Menu location(s):** Topography &gt; Survey plan...step by step &gt; 3. Current plot layout &gt; Constructions &gt; Veranda · Lines &gt; Draw by typing command &gt; Basic line for Topography and Maps &gt; Constructions &gt; Veranda  
**Original English help:** Line, pline or arc for Exterior Terrace boundaries.

#### `ID_LCSTM1`
**English menu label:** Custom-1 Line with letters — LCSTM1 / PCSTM1  
**Direct CAD command in menu/toolbar:** `LCSTM1`  
**Displayed shortcut(s):** `LCSTM1 / PCSTM1`  
**Menu location(s):** Lines &gt; Draw by typing command &gt; Various Lines &gt; with letters of your choice  
**Original English help:** Line, pline or arc for Custom-1 Line with letters. Line type with a letter of your choice ---; ---? ---

#### `ID_LCSTM10`
**English menu label:** Custom-10 Line with letters — LCSTM10 / PCSTM10  
**Direct CAD command in menu/toolbar:** `LCSTM10`  
**Displayed shortcut(s):** `LCSTM10 / PCSTM10`  
**Menu location(s):** Lines &gt; Draw by typing command &gt; Various Lines &gt; with letters of your choice  
**Original English help:** Line, pline or arc for Custom-10 Line with letters. Line type with ten letters of your choice --- ?????????? --- ?????????? ---

#### `ID_LCSTM2`
**English menu label:** Custom-2 Line with letters — LCSTM2 / PCSTM2  
**Direct CAD command in menu/toolbar:** `LCSTM2`  
**Displayed shortcut(s):** `LCSTM2 / PCSTM2`  
**Menu location(s):** Lines &gt; Draw by typing command &gt; Various Lines &gt; with letters of your choice  
**Original English help:** Line, pline or arc for Custom-1 Line with letters. Line type with a letter of your choice ---; ---? ---

#### `ID_LCSTM3`
**English menu label:** Custom-3 Line with letters — LCSTM3 / PCSTM3  
**Direct CAD command in menu/toolbar:** `LCSTM3`  
**Displayed shortcut(s):** `LCSTM3 / PCSTM3`  
**Menu location(s):** Lines &gt; Draw by typing command &gt; Various Lines &gt; with letters of your choice  
**Original English help:** Line, pline or arc for Custom-3 Line with letters. Line type with a letter of your choice ---; ---? ---

#### `ID_LCSTM4`
**English menu label:** Custom-4 Line with letters — LCSTM4 / PCSTM4  
**Direct CAD command in menu/toolbar:** `LCSTM4`  
**Displayed shortcut(s):** `LCSTM4 / PCSTM4`  
**Menu location(s):** Lines &gt; Draw by typing command &gt; Various Lines &gt; with letters of your choice  
**Original English help:** Line, pline or arc for Custom-4 Line with letters. Line type with a letter of your choice ---; ---? ---

#### `ID_LCSTM5`
**English menu label:** Custom-5 Line with letters — LCSTM5 / PCSTM5  
**Direct CAD command in menu/toolbar:** `LCSTM5`  
**Displayed shortcut(s):** `LCSTM5 / PCSTM5`  
**Menu location(s):** Lines &gt; Draw by typing command &gt; Various Lines &gt; with letters of your choice  
**Original English help:** Line, pline or arc for Custom-5 Line with letters. Line type with two letters of your choice ---; ? ---? ? ---

#### `ID_LCSTM6`
**English menu label:** Custom-6 Line with letters — LCSTM6 / PCSTM6  
**Direct CAD command in menu/toolbar:** `LCSTM6`  
**Displayed shortcut(s):** `LCSTM6 / PCSTM6`  
**Menu location(s):** Lines &gt; Draw by typing command &gt; Various Lines &gt; with letters of your choice  
**Original English help:** Line, pline or arc for Custom-6 Line with letters. Line type with two letters of your choice ---; ? ---? ? ---

#### `ID_LCSTM7`
**English menu label:** Custom-7 Line with letters — LCSTM7 / PCSTM7  
**Direct CAD command in menu/toolbar:** `LCSTM7`  
**Displayed shortcut(s):** `LCSTM7 / PCSTM7`  
**Menu location(s):** Lines &gt; Draw by typing command &gt; Various Lines &gt; with letters of your choice  
**Original English help:** Line, pline or arc for Custom-7 Line with letters. Line type with two letters of your choice ---; ? ---? ? ---

#### `ID_LCSTM8`
**English menu label:** Custom-8 Line with letters — LCSTM8 / PCSTM8  
**Direct CAD command in menu/toolbar:** `LCSTM8`  
**Displayed shortcut(s):** `LCSTM8 / PCSTM8`  
**Menu location(s):** Lines &gt; Draw by typing command &gt; Various Lines &gt; with letters of your choice  
**Original English help:** Line, pline or arc for Custom-8 Line with letters. Line type with three letters of your choice ---; ? ? ---? ? ? ---

#### `ID_LCSTM9`
**English menu label:** Custom-9 Line with letters — LCSTM9 / PCSTM9  
**Direct CAD command in menu/toolbar:** `LCSTM9`  
**Displayed shortcut(s):** `LCSTM9 / PCSTM9`  
**Menu location(s):** Lines &gt; Draw by typing command &gt; Various Lines &gt; with letters of your choice  
**Original English help:** Line, pline or arc for Custom-9 Line with letters. Line type with three letters of your choice ---; ? ? ---? ? ? ---

#### `ID_LD1`
**English menu label:** Witnessing lines — LD1 · hidden Line-1 — LD1 / PD1  
**Direct CAD command in menu/toolbar:** `LD1`  
**Displayed shortcut(s):** `LD1`, `LD1 / PD1`  
**Menu location(s):** Topography &gt; Witnessing points · Lines &gt; Draw by typing command &gt; Various Lines &gt; hidden Lines  
**Toolbar(s):** Witnessing points  
**Original English help:** Line, pline or arc for Intermittent-1. See the dashes with the ZLL command.

#### `ID_LD2`
**English menu label:** hidden Line-2 — LD2 / PD2  
**Direct CAD command in menu/toolbar:** `LD2`  
**Displayed shortcut(s):** `LD2 / PD2`  
**Menu location(s):** Lines &gt; Draw by typing command &gt; Various Lines &gt; hidden Lines  
**Original English help:** Line, pline or arc for Intermittent-2. See the dashes with the ZLL command.

#### `ID_LD3`
**English menu label:** hidden Line-3 — LD3 / PD3  
**Direct CAD command in menu/toolbar:** `LD3`  
**Displayed shortcut(s):** `LD3 / PD3`  
**Menu location(s):** Lines &gt; Draw by typing command &gt; Various Lines &gt; hidden Lines  
**Original English help:** Line, pline or arc for Intermittent-3. See the dashes with the ZLL command.

#### `ID_LD4`
**English menu label:** hidden Line-4 — LD4 / PD4  
**Direct CAD command in menu/toolbar:** `LD4`  
**Displayed shortcut(s):** `LD4 / PD4`  
**Menu location(s):** Lines &gt; Draw by typing command &gt; Various Lines &gt; hidden Lines  
**Original English help:** Line, pline or arc for Intermittent-4. See the dashes with the ZLL command.

#### `ID_LD5`
**English menu label:** hidden Line-5 — LD5 / PD5  
**Direct CAD command in menu/toolbar:** `LD5`  
**Displayed shortcut(s):** `LD5 / PD5`  
**Menu location(s):** Lines &gt; Draw by typing command &gt; Various Lines &gt; hidden Lines  
**Original English help:** Line, pline or arc for Intermittent-5. See the dashes with the ZLL command.

#### `ID_LD6`
**English menu label:** hidden Line-6 — LD6 / PD6  
**Direct CAD command in menu/toolbar:** `LD6`  
**Displayed shortcut(s):** `LD6 / PD6`  
**Menu location(s):** Lines &gt; Draw by typing command &gt; Various Lines &gt; hidden Lines  
**Original English help:** Line, pline or arc for Intermittent-6. See the dashes with the ZLL command.

#### `ID_LD7`
**English menu label:** hidden Line-7 — LD7 / PD7  
**Direct CAD command in menu/toolbar:** `LD7`  
**Displayed shortcut(s):** `LD7 / PD7`  
**Menu location(s):** Lines &gt; Draw by typing command &gt; Various Lines &gt; hidden Lines  
**Original English help:** Line, pline or arc for Intermittent-7. See the dashes with the ZLL command.

#### `ID_LD8`
**English menu label:** hidden Line-8 — LD8 / PD8  
**Direct CAD command in menu/toolbar:** `LD8`  
**Displayed shortcut(s):** `LD8 / PD8`  
**Menu location(s):** Lines &gt; Draw by typing command &gt; Various Lines &gt; hidden Lines  
**Original English help:** Line, pline or arc for Intermittent-8. See the dashes with the ZLL command.

#### `ID_LDAP`
**English menu label:** Floor covering — LDAP / PDAP · Floor covering section — LDAP / PDAP  
**Direct CAD command in menu/toolbar:** `LDAP`  
**Displayed shortcut(s):** `LDAP / PDAP`  
**Menu location(s):** Sections-Elevation plans &gt; Section...step by step &gt; 3. Draw · Lines &gt; Draw by typing command &gt; Basic linetypes for Floorplan, elevation, Section  
**Toolbar(s):** Section plan lines  
**Original English help:** Line, pline or arc for floor covering section.

#### `ID_LDAS`
**English menu label:** Forest Area — LDAS / PDAS · Forest limits — PDAS  
**Direct CAD command in menu/toolbar:** `LDAS`, `PDAS`  
**Displayed shortcut(s):** `LDAS / PDAS`, `PDAS`  
**Menu location(s):** Topography &gt; Survey plan...step by step &gt; 13. Mapping legislation lines · Topography &gt; Forest areas · Lines &gt; Draw by typing command &gt; Basic line for Topography and Maps &gt; Urban Planning  
**Toolbar(s):** 21 FOREST  
**Original English help:** Line, pline or arc for Forest Area boundary.

#### `ID_LDHM`
**English menu label:** City municipality and community boundaries — PDHM  
**Direct CAD command in menu/toolbar:** `PDHM`  
**Displayed shortcut(s):** `PDHM`  
**Menu location(s):** Topography &gt; Survey plan...step by step &gt; 13. Mapping legislation lines · Lines &gt; Draw by typing command &gt; Basic line for Topography and Maps &gt; Urban Planning  
**Original English help:** Boundaries of Municipalities and Communities.

#### `ID_LDIAF`
**English menu label:** Various side lines — LDIAF / PDIAF · Various — LDIAF / PDIAF  
**Direct CAD command in menu/toolbar:** `LDIAF`  
**Displayed shortcut(s):** `LDIAF / PDIAF`  
**Menu location(s):** Floor plans &gt; Floor plan...step by step &gt; 2. Sections and pojections · Sections-Elevation plans &gt; Section...step by step &gt; 3. Draw · Lines &gt; Draw by typing command &gt; Basic linetypes for Floorplan, elevation, Section  
**Toolbar(s):** Section plan lines · Elevation plan lines · Floor plan lines  
**Original English help:** Line, pline or arc for Miscellaneous. (Lines without significant height difference, material changes, built-in cabinets, ...)

#### `ID_LDOK`
**English menu label:** Overview projections — LDOK / PDOK · Construction Beams - Bottom view — LDOK / PDOK  
**Direct CAD command in menu/toolbar:** `LDOK`  
**Displayed shortcut(s):** `LDOK / PDOK`  
**Menu location(s):** Floor plans &gt; Floor plan...step by step &gt; 2. Sections and pojections · Lines &gt; Draw by typing command &gt; Basic linetypes for Floorplan, elevation, Section  
**Toolbar(s):** Floor plan lines  
**Original English help:** Line, pline or arc for beam and overhead projections. (Beams, roof steps, ceiling-false ceiling limits, roof slope changes, roof holes ...)

#### `ID_LDOKF`
**English menu label:** Overview proections hidden — LDOKF / PDOKF · Construction Beams - Bottom view OFF — LDOKF / PDOKF  
**Direct CAD command in menu/toolbar:** `LDOKf`, `LDOKF`  
**Displayed shortcut(s):** `LDOKF / PDOKF`  
**Menu location(s):** Floor plans &gt; Floor plan...step by step &gt; 2. Sections and pojections · Lines &gt; Draw by typing command &gt; Basic linetypes for Floorplan, elevation, Section  
**Toolbar(s):** Floor plan lines  
**Original English help:** Line, pline or arc for hidden beams and overhead projections.

#### `ID_LDOM`
**English menu label:** Building footprint line — LDOM / PDOM  
**Direct CAD command in menu/toolbar:** `LDOM`  
**Displayed shortcut(s):** `LDOM / PDOM`  
**Menu location(s):** Topography &gt; Survey plan...step by step &gt; 13. Mapping legislation lines · Lines &gt; Draw by typing command &gt; Basic line for Topography and Maps &gt; Urban Planning  
**Original English help:** Line, pline or arc for Building Line for properties outside the Plan.

#### `ID_LDOR`
**English menu label:** Storey separating line — LDOR / PDOR  
**Direct CAD command in menu/toolbar:** `LDOR`  
**Displayed shortcut(s):** `LDOR / PDOR`  
**Menu location(s):** Topography &gt; Survey plan...step by step &gt; 3. Current plot layout &gt; Constructions · Lines &gt; Draw by typing command &gt; Basic line for Topography and Maps &gt; Constructions  
**Original English help:** Line, pline or arc for Floor Separator. Limit A '. T 'etc floors outside or inside the contour of the Ground Floor.

#### `ID_LDR`
**English menu label:** Asphalt edge — LDR / PDR  
**Direct CAD command in menu/toolbar:** `LDR`  
**Displayed shortcut(s):** `LDR / PDR`  
**Menu location(s):** Topography &gt; Survey plan...step by step &gt; 3. Current plot layout &gt; Roads - Limits - Boundaries · Lines &gt; Draw by typing command &gt; Basic line for Topography and Maps &gt; Roads - Lines - Boundaries  
**Original English help:** Line, pline or arc for asphalt border. This line is suggested when there is no curb, kennel or other asphalt formwork.

#### `ID_LEAG`
**English menu label:** Surface pipeline — LEAG / PEAG · Surface Conduit — LEAG / PEAG  
**Direct CAD command in menu/toolbar:** `PEAG`  
**Displayed shortcut(s):** `LEAG / PEAG`  
**Menu location(s):** Topography &gt; Survey plan...step by step &gt; 3. Current plot layout &gt; Roads - Limits - Boundaries · Lines &gt; Draw by typing command &gt; Basic line for Topography and Maps &gt; Roads - Lines - Boundaries  
**Original English help:** Line, pline or arc for shaft or surface Pipeline trace.

#### `ID_LEIDD`
**English menu label:** Special Building restrictions area — LEIDD / PEIDD  
**Direct CAD command in menu/toolbar:** `PEIDD`  
**Displayed shortcut(s):** `LEIDD / PEIDD`  
**Menu location(s):** Topography &gt; Survey plan...step by step &gt; 13. Mapping legislation lines · Lines &gt; Draw by typing command &gt; Basic line for Topography and Maps &gt; Urban Planning  
**Original English help:** Line, pline or arc for Limit of Special Building Constraints.

#### `ID_LEOR`
**English menu label:** Roof cladding — LEOR / PEOR · Roof cladding section — LEOR / PEOR  
**Direct CAD command in menu/toolbar:** `LEOR`  
**Displayed shortcut(s):** `LEOR / PEOR`  
**Menu location(s):** Sections-Elevation plans &gt; Section...step by step &gt; 3. Draw · Lines &gt; Draw by typing command &gt; Basic linetypes for Floorplan, elevation, Section  
**Toolbar(s):** Section plan lines  
**Original English help:** Line, pline or arc for roof cladding section.

#### `ID_LEPI`
**English menu label:** Multiplication — LEPI / PEPI  
**Direct CAD command in menu/toolbar:** `PEPI`  
**Displayed shortcut(s):** `LEPI / PEPI`  
**Menu location(s):** Lines &gt; Draw by typing command &gt; Various Lines &gt; Symbols Lines — # # # # # # &gt; only Symbols &gt; Squares,Circles,Rhombus,Stars,Crosses,Addition,Multiplication,Arrows  
**Original English help:** Line, pline or arc for Epi. See the line with the ZLL command.

#### `ID_LEPI2`
**English menu label:** Multiplication (small space) — LEPI2 / PEPI2  
**Direct CAD command in menu/toolbar:** `PEPI2`  
**Displayed shortcut(s):** `LEPI2 / PEPI2`  
**Menu location(s):** Lines &gt; Draw by typing command &gt; Various Lines &gt; Symbols Lines — # # # # # # &gt; only Symbols &gt; Squares,Circles,Rhombus,Stars,Crosses,Addition,Multiplication,Arrows  
**Original English help:** Line, pline or arc for Epi (small gap). See the line with the ZLL command.

#### `ID_LEPI3`
**English menu label:** Multiplication (no space) — LEPI3 / PEPI3  
**Direct CAD command in menu/toolbar:** `PEPI3`  
**Displayed shortcut(s):** `LEPI3 / PEPI3`  
**Menu location(s):** Lines &gt; Draw by typing command &gt; Various Lines &gt; Symbols Lines — # # # # # # &gt; only Symbols &gt; Squares,Circles,Rhombus,Stars,Crosses,Addition,Multiplication,Arrows  
**Original English help:** Line, pline or arc for On (no space). See the line with the ZLL command.

#### `ID_LEX`
**English menu label:** Balcony — LEX / PEX  
**Direct CAD command in menu/toolbar:** `LEX`  
**Displayed shortcut(s):** `LEX / PEX`  
**Menu location(s):** Topography &gt; Survey plan...step by step &gt; 3. Current plot layout &gt; Constructions · Lines &gt; Draw by typing command &gt; Basic line for Topography and Maps &gt; Constructions  
**Original English help:** Line, pline or arc for external Balcony border.

#### `ID_LFER`
**English menu label:** Structure section (Columns, beams etc) — LFER / PFER · Bearing structure section(Columns-Load bearing walls) — LFER / PFER  
**Direct CAD command in menu/toolbar:** `LFER`  
**Displayed shortcut(s):** `LFER / PFER`  
**Menu location(s):** Floor plans &gt; Floor plan...step by step &gt; 2. Sections and pojections · Sections-Elevation plans &gt; Section...step by step &gt; 3. Draw · Sections-Elevation plans &gt; Elevation view...step by step &gt; 3. Draw · Lines &gt; Draw by typing command &gt; Basic linetypes for Floorplan, elevation, Section  
**Toolbar(s):** Section plan lines · Elevation plan lines · Floor plan lines  
**Original English help:** Line, pline or arc for Bearing Section (Columns-Walls)

#### `ID_LFK`
**English menu label:** Hidden structure section — LFK · Hidden bearing struction elements — LFK / PFK  
**Direct CAD command in menu/toolbar:** `LFK`  
**Displayed shortcut(s):** `LFK`, `LFK / PFK`  
**Menu location(s):** Floor plans &gt; Floor plan...step by step &gt; 2. Sections and pojections · Sections-Elevation plans &gt; Section...step by step &gt; 3. Draw · Lines &gt; Draw by typing command &gt; Basic linetypes for Floorplan, elevation, Section  
**Toolbar(s):** Section plan lines · Floor plan lines  
**Original English help:** Line, pline or arc for hidden bearing elements in section (not visible due to other elements in the first level) or bearing elements whose position is assumed Line, pline or arc for Bearing elements in their possible position.

#### `ID_LFT`
**English menu label:** Hidden walls section — LTK / PTK  
**Direct CAD command in menu/toolbar:** `LTK`  
**Displayed shortcut(s):** `LTK / PTK`  
**Menu location(s):** Lines &gt; Draw by typing command &gt; Basic linetypes for Floorplan, elevation, Section  
**Original English help:** Line, pline or arc for Walls in their possible position.

#### `ID_LGASTRA`
**English menu label:** Line - Stars — LGASTRA / PGASTRA  
**Direct CAD command in menu/toolbar:** `PGASTRA`  
**Displayed shortcut(s):** `LGASTRA / PGASTRA`  
**Menu location(s):** Lines &gt; Draw by typing command &gt; Various Lines &gt; Symbols Lines — # # # # # # &gt; Line - Symbol  
**Original English help:** Line, pline or arc for Line - Stars. See the line with the ZLL command.

#### `ID_LGDIA`
**English menu label:** Line - Division sign — LGDIA / PGDIA  
**Direct CAD command in menu/toolbar:** `PGDIA`  
**Displayed shortcut(s):** `LGDIA / PGDIA`  
**Menu location(s):** Lines &gt; Draw by typing command &gt; Various Lines &gt; Symbols Lines — # # # # # # &gt; Line - Symbol  
**Original English help:** Line, pline or arc for Line - Dia. See the line with the ZLL command.

#### `ID_LGEPI`
**English menu label:** Line - Multiplication symbol — LGEPI / PGEPI  
**Direct CAD command in menu/toolbar:** `PGEPI`  
**Displayed shortcut(s):** `LGEPI / PGEPI`  
**Menu location(s):** Lines &gt; Draw by typing command &gt; Various Lines &gt; Symbols Lines — # # # # # # &gt; Line - Symbol  
**Original English help:** Line, pline or arc for Line - Up. See the line with the ZLL command.

#### `ID_LGKYK`
**English menu label:** Line - Circles — LGKYK / PGKYK  
**Direct CAD command in menu/toolbar:** `PGKYK`  
**Displayed shortcut(s):** `LGKYK / PGKYK`  
**Menu location(s):** Lines &gt; Draw by typing command &gt; Various Lines &gt; Symbols Lines — # # # # # # &gt; Line - Symbol  
**Original English help:** Line, pline or arc for Line - Circles. See the line with the ZLL command.

#### `ID_LGPS`
**English menu label:** General urban planning boundary — PGPS  
**Direct CAD command in menu/toolbar:** `PGPS`  
**Displayed shortcut(s):** `PGPS`  
**Menu location(s):** Topography &gt; Survey plan...step by step &gt; 13. Mapping legislation lines · Lines &gt; Draw by typing command &gt; Basic line for Topography and Maps &gt; Urban Planning  
**Original English help:** Pline General Urban Plan Limit.

#### `ID_LGROMBOI`
**English menu label:** Line - Rhombus — LGROMBOI / PGROMBOI  
**Direct CAD command in menu/toolbar:** `PGROMBOI`  
**Displayed shortcut(s):** `LGROMBOI / PGROMBOI`  
**Menu location(s):** Lines &gt; Draw by typing command &gt; Various Lines &gt; Symbols Lines — # # # # # # &gt; Line - Symbol  
**Original English help:** Line, pline or arc for Line - Rhombuses. See the line with the ZLL command.

#### `ID_LGSASTRA`
**English menu label:** Line - Solid Stars — LGSASTRA / PGSASTRA  
**Direct CAD command in menu/toolbar:** `PGSASTRA`  
**Displayed shortcut(s):** `LGSASTRA / PGSASTRA`  
**Menu location(s):** Lines &gt; Draw by typing command &gt; Various Lines &gt; Symbols Lines — # # # # # # &gt; Line - Symbol  
**Original English help:** Line, pline or arc for Line - Solid Stars. See the line with the ZLL command.

#### `ID_LGSKYK`
**English menu label:** Line - Solid Circles — LGSKYK / PGSKYK  
**Direct CAD command in menu/toolbar:** `PGSKYK`  
**Displayed shortcut(s):** `LGSKYK / PGSKYK`  
**Menu location(s):** Lines &gt; Draw by typing command &gt; Various Lines &gt; Symbols Lines — # # # # # # &gt; Line - Symbol  
**Original English help:** Line, pline or arc for Line - Solid Circles. See the line with the ZLL command.

#### `ID_LGSTAYROI`
**English menu label:** Line - Crosses — LGSTAYROI / PGSTAYROI  
**Direct CAD command in menu/toolbar:** `PGSTAYROI`  
**Displayed shortcut(s):** `LGSTAYROI / PGSTAYROI`  
**Menu location(s):** Lines &gt; Draw by typing command &gt; Various Lines &gt; Symbols Lines — # # # # # # &gt; Line - Symbol  
**Original English help:** Line, pline or arc for Line - Crosses. See the line with the ZLL command.

#### `ID_LGSTET`
**English menu label:** Line - Solid Squares — LGSTET / PGSTET  
**Direct CAD command in menu/toolbar:** `PGSTET`  
**Displayed shortcut(s):** `LGSTET / PGSTET`  
**Menu location(s):** Lines &gt; Draw by typing command &gt; Various Lines &gt; Symbols Lines — # # # # # # &gt; Line - Symbol  
**Original English help:** Line, pline or arc for Line - Solid Squares. See the line with the ZLL command.

#### `ID_LGSVEL`
**English menu label:** Line - Solid Arrows — LGSVEL / PGSVEL  
**Direct CAD command in menu/toolbar:** `PGSVEL`  
**Displayed shortcut(s):** `LGSVEL / PGSVEL`  
**Menu location(s):** Lines &gt; Draw by typing command &gt; Various Lines &gt; Symbols Lines — # # # # # # &gt; Line - Symbol  
**Original English help:** Line, pline or arc for Line - Solid Arrows. See the line with the ZLL command.

#### `ID_LGSYN`
**English menu label:** Line - Addition symbol — LGSYN / PGSYN  
**Direct CAD command in menu/toolbar:** `PGSYN`  
**Displayed shortcut(s):** `LGSYN / PGSYN`  
**Menu location(s):** Lines &gt; Draw by typing command &gt; Various Lines &gt; Symbols Lines — # # # # # # &gt; Line - Symbol  
**Original English help:** Line, pline or arc for Line - Plus View the line with the ZLL command.

#### `ID_LGTET`
**English menu label:** Line - Squares — LGTET / PGTET  
**Direct CAD command in menu/toolbar:** `PGTET`  
**Displayed shortcut(s):** `LGTET / PGTET`  
**Menu location(s):** Lines &gt; Draw by typing command &gt; Various Lines &gt; Symbols Lines — # # # # # # &gt; Line - Symbol  
**Original English help:** Line, pline or arc for Line - Squares. See the line with the ZLL command.

#### `ID_LKAL`
**English menu label:** Cultivation limit — LKAL / PKAL · Cultivation edge — LKAL / PKAL  
**Direct CAD command in menu/toolbar:** `LKAL`  
**Displayed shortcut(s):** `LKAL / PKAL`  
**Menu location(s):** Topography &gt; Survey plan...step by step &gt; 3. Current plot layout &gt; Roads - Limits - Boundaries · Lines &gt; Draw by typing command &gt; Basic line for Topography and Maps &gt; Roads - Lines - Boundaries  
**Original English help:** Line, pline or arc for crop change limits.

#### `ID_LKG`
**English menu label:** Railing — LKG / PKG · Rail Fence — LKG / PKG  
**Direct CAD command in menu/toolbar:** `LKG`  
**Displayed shortcut(s):** `LKG / PKG`  
**Menu location(s):** Topography &gt; Survey plan...step by step &gt; 3. Current plot layout &gt; Existing Boundary · Lines &gt; Draw by typing command &gt; Basic line for Topography and Maps &gt; Existing Boundary  
**Original English help:** Line, pline or arc for Railing. All kinds of railings (iron, aluminum, wooden, etc.

#### `ID_LKK1`
**English menu label:** Perpendicular-1 — LKK1 / PKK1  
**Direct CAD command in menu/toolbar:** `LKK1`  
**Displayed shortcut(s):** `LKK1 / PKK1`  
**Menu location(s):** Lines &gt; Draw by typing command &gt; Various Lines &gt; Perpendicular Line — \|\|\|\|\|\|\|\|\|\|\|  
**Original English help:** Line, pline or arc for Vertical-1. View the verticals with the ZLL command.

#### `ID_LKK2`
**English menu label:** Perpendicular-2 — LKK2 / PKK2  
**Direct CAD command in menu/toolbar:** `LKK2`  
**Displayed shortcut(s):** `LKK2 / PKK2`  
**Menu location(s):** Lines &gt; Draw by typing command &gt; Various Lines &gt; Perpendicular Line — \|\|\|\|\|\|\|\|\|\|\|  
**Original English help:** Line, pline or arc for Vertical-2. View the verticals with the ZLL command.

#### `ID_LKK3`
**English menu label:** Perpendicular-3 — LKK3 / PKK3  
**Direct CAD command in menu/toolbar:** `LKK3`  
**Displayed shortcut(s):** `LKK3 / PKK3`  
**Menu location(s):** Lines &gt; Draw by typing command &gt; Various Lines &gt; Perpendicular Line — \|\|\|\|\|\|\|\|\|\|\|  
**Original English help:** Line, pline or arc for Vertical-3. View the verticals with the ZLL command.

#### `ID_LKK4`
**English menu label:** Perpendicular-4 — LKK4 / PKK4  
**Direct CAD command in menu/toolbar:** `LKK4`  
**Displayed shortcut(s):** `LKK4 / PKK4`  
**Menu location(s):** Lines &gt; Draw by typing command &gt; Various Lines &gt; Perpendicular Line — \|\|\|\|\|\|\|\|\|\|\|  
**Original English help:** Line, pline or arc for Vertical-4. View the verticals with the ZLL command.

#### `ID_LKOYF`
**English menu label:** Frames of openigns — LKOYF / PKOYF · Doors and windows — LKOYF / PKOYF  
**Direct CAD command in menu/toolbar:** `LKOYF`  
**Displayed shortcut(s):** `LKOYF / PKOYF`  
**Menu location(s):** Floor plans &gt; Floor plan...step by step &gt; 2. Sections and pojections · Sections-Elevation plans &gt; Section...step by step &gt; 3. Draw · Lines &gt; Draw by typing command &gt; Basic linetypes for Floorplan, elevation, Section  
**Toolbar(s):** Section plan lines · Elevation plan lines · Floor plan lines  
**Original English help:** Line, pline or arc for Boundaries and details of Frames.

#### `ID_LKR`
**English menu label:** Curb — LKR / PKR  
**Direct CAD command in menu/toolbar:** `PKR`  
**Displayed shortcut(s):** `LKR / PKR`  
**Menu location(s):** Topography &gt; Survey plan...step by step &gt; 3. Current plot layout &gt; Constructions · Lines &gt; Draw by typing command &gt; Basic line for Topography and Maps &gt; Constructions  
**Original English help:** Line, pline or arc for Curb. This line is suggested single when the sidewalk is covered with slabs or concrete and double when there is still dirt.

#### `ID_LKST`
**English menu label:** Gallery — LKST / PKST · Existing covered Passageway — LKST / PKST  
**Direct CAD command in menu/toolbar:** `LKST`  
**Displayed shortcut(s):** `LKST / PKST`  
**Menu location(s):** Topography &gt; Survey plan...step by step &gt; 3. Current plot layout &gt; Constructions · Lines &gt; Draw by typing command &gt; Basic line for Topography and Maps &gt; Constructions  
**Original English help:** Line, pline or arc for Existing Gallery.

#### `ID_LKT`
**English menu label:** Building — LKT / PKT  
**Direct CAD command in menu/toolbar:** `LKT`  
**Displayed shortcut(s):** `LKT / PKT`  
**Menu location(s):** Topography &gt; Survey plan...step by step &gt; 3. Current plot layout &gt; Constructions · Lines &gt; Draw by typing command &gt; Basic line for Topography and Maps &gt; Constructions  
**Original English help:** Line, pline or arc for Building. (Boundaries of closed spaces of a building).

#### `ID_LKYK`
**English menu label:** Circles — LKYK / PKYK  
**Direct CAD command in menu/toolbar:** `PKYK`  
**Displayed shortcut(s):** `LKYK / PKYK`  
**Menu location(s):** Lines &gt; Draw by typing command &gt; Various Lines &gt; Symbols Lines — # # # # # # &gt; only Symbols &gt; Squares,Circles,Rhombus,Stars,Crosses,Addition,Multiplication,Arrows  
**Original English help:** Line, pline or arc for Circles. See the line with the ZLL command.

#### `ID_LKYK2`
**English menu label:** Circles (small space) — LKYK2 / PKYK2  
**Direct CAD command in menu/toolbar:** `PKYK2`  
**Displayed shortcut(s):** `LKYK2 / PKYK2`  
**Menu location(s):** Lines &gt; Draw by typing command &gt; Various Lines &gt; Symbols Lines — # # # # # # &gt; only Symbols &gt; Squares,Circles,Rhombus,Stars,Crosses,Addition,Multiplication,Arrows  
**Original English help:** Line, pline or arc for Circles (with small spaces). See the line with the ZLL command.

#### `ID_LKYK3`
**English menu label:** Circles (no space) — LKYK3 / PKYK3  
**Direct CAD command in menu/toolbar:** `PKYK3`  
**Displayed shortcut(s):** `LKYK3 / PKYK3`  
**Menu location(s):** Lines &gt; Draw by typing command &gt; Various Lines &gt; Symbols Lines — # # # # # # &gt; only Symbols &gt; Squares,Circles,Rhombus,Stars,Crosses,Addition,Multiplication,Arrows  
**Original English help:** Line, pline or arc for Circles (no spaces). See the line with the ZLL command.

#### `ID_LL0`
**English menu label:** Delete according to length — LL0  
**Direct CAD command in menu/toolbar:** `LL0`  
**Displayed shortcut(s):** `LL0`  
**Menu location(s):** Modify &gt; Modify-Change &gt; Copy-Move-Erase  
**Toolbar(s):** 05 Lines · 13 Modify  
**Original English help:** Obects (lines, plines, splines, arcs) that are shorter than lengthh you set, are erased.

#### `ID_LLALL`
**English menu label:** Update layer in LMAN — LLALL  
**Direct CAD command in menu/toolbar:** `LLALL`  
**Displayed shortcut(s):** `LLALL`  
**Menu location(s):** Layers &gt; Modify layers  
**Toolbar(s):** 06 Layers  
**Original English help:** You select a layer and line color, type and thickness and it is set to be open in as many LMAN (layerstates) you choose.

#### `ID_LLC`
**English menu label:** Change layer color — LLC  
**Direct CAD command in menu/toolbar:** `LLC`  
**Displayed shortcut(s):** `LLC`  
**Menu location(s):** Layers &gt; Modify layers  
**Toolbar(s):** 06 Layers  
**Original English help:** Select an object on the screen and the color you want its layer to have.

#### `ID_LLL`
**English menu label:** Current LMAN — LLL  
**Direct CAD command in menu/toolbar:** `LLL`  
**Displayed shortcut(s):** `LLL`  
**Menu location(s):** Layers &gt; Edit layers  
**Toolbar(s):** 06 Layers  
**Original English help:** The current option of the Express Tools LMAN command is displayed at the bottom right of the screen.

#### `ID_LLOL`
**English menu label:** HighLight layer — LLOL  
**Direct CAD command in menu/toolbar:** `LLOL`  
**Displayed shortcut(s):** `LLOL`  
**Menu location(s):** Layers &gt; Edit layers  
**Toolbar(s):** 06 Layers  
**Original English help:** Objects belonging to the layer you select flash as you move the mouse on the screen.

#### `ID_LLW`
**English menu label:** Change layer lweigth — LLW  
**Direct CAD command in menu/toolbar:** `LLW`  
**Displayed shortcut(s):** `LLW`  
**Menu location(s):** Layers &gt; Modify layers  
**Toolbar(s):** 06 Layers  
**Original English help:** No matching HELPSTRINGS description in this MNU. Refer to the menu label and original manual.

#### `ID_LMO`
**English menu label:** Path — LMO / PMO  
**Direct CAD command in menu/toolbar:** `LMO`  
**Displayed shortcut(s):** `LMO / PMO`  
**Menu location(s):** Topography &gt; Survey plan...step by step &gt; 3. Current plot layout &gt; Roads - Limits - Boundaries · Lines &gt; Draw by typing command &gt; Basic line for Topography and Maps &gt; Roads - Lines - Boundaries  
**Original English help:** Line, pline or arc for Path boundaries.

#### `ID_LOG`
**English menu label:** Building line — LOG / POG  
**Direct CAD command in menu/toolbar:** `LOG`  
**Displayed shortcut(s):** `LOG / POG`  
**Menu location(s):** Topography &gt; Survey plan...step by step &gt; 13. Mapping legislation lines · Lines &gt; Draw by typing command &gt; Basic line for Topography and Maps &gt; Urban Planning  
**Original English help:** Line, pline or arc for planned Building.

#### `ID_LOGK`
**English menu label:** Abolished building lines — LOGK / POGK  
**Direct CAD command in menu/toolbar:** `LOGK`  
**Displayed shortcut(s):** `LOGK / POGK`  
**Menu location(s):** Topography &gt; Survey plan...step by step &gt; 13. Mapping legislation lines · Lines &gt; Draw by typing command &gt; Basic line for Topography and Maps &gt; Urban Planning  
**Original English help:** Line, pline or arc for Building Abolished.

#### `ID_LOIK`
**English menu label:** Village boundary — LOIK / POIK  
**Direct CAD command in menu/toolbar:** `LOIK`  
**Displayed shortcut(s):** `LOIK / POIK`  
**Menu location(s):** Topography &gt; Survey plan...step by step &gt; 13. Mapping legislation lines · Lines &gt; Draw by typing command &gt; Basic line for Topography and Maps &gt; Urban Planning  
**Original English help:** Line, pline or arc for Settlement Boundary.

#### `ID_LOIK23`
**English menu label:** Village boundary before 1923 — LOIK23 / POIK23  
**Direct CAD command in menu/toolbar:** `LOIK23`  
**Displayed shortcut(s):** `LOIK23 / POIK23`  
**Menu location(s):** Topography &gt; Survey plan...step by step &gt; 13. Mapping legislation lines · Lines &gt; Draw by typing command &gt; Basic line for Topography and Maps &gt; Urban Planning  
**Original English help:** Line, pline or arc for Settlement Boundary before 1923.

#### `ID_LOK`
**English menu label:** Hidden view proections — LOK · Side view hidden elements — LOK / POK  
**Direct CAD command in menu/toolbar:** `LOK`  
**Displayed shortcut(s):** `LOK`, `LOK / POK`  
**Menu location(s):** Sections-Elevation plans &gt; Elevation view...step by step &gt; 3. Draw · Lines &gt; Draw by typing command &gt; Basic linetypes for Floorplan, elevation, Section  
**Toolbar(s):** Elevation plan lines  
**Original English help:** Line, pline or arc for Hidden Face Elements. (Key elements behind the level of the face to be seen with hidden).

#### `ID_LOK2`
**English menu label:** Hidden projections 2nd distance — LOK2 · 2nd distance elevation's hidden elements — LOK2 / POK2  
**Direct CAD command in menu/toolbar:** `LOK2`  
**Displayed shortcut(s):** `LOK2`, `LOK2 / POK2`  
**Menu location(s):** Sections-Elevation plans &gt; Elevation view...step by step &gt; 3. Draw · Lines &gt; Draw by typing command &gt; Basic linetypes for Floorplan, elevation, Section  
**Toolbar(s):** Elevation plan lines  
**Original English help:** Line, pline or arc for Hidden Facing in 2nd distance. (Secondary elements behind the level of the face to be seen with hidden).

#### `ID_LPAR`
**English menu label:** Flowerbed — LPAR / PPAR  
**Direct CAD command in menu/toolbar:** `LPAR`  
**Displayed shortcut(s):** `LPAR / PPAR`  
**Menu location(s):** Topography &gt; Survey plan...step by step &gt; 3. Current plot layout &gt; Constructions · Lines &gt; Draw by typing command &gt; Basic line for Topography and Maps &gt; Constructions  
**Original English help:** Line, pline or arc for Flowerbed. Parapet borders (usually low) that define areas with soil or vegetation.

#### `ID_LPAT`
**English menu label:** Calculations with Line,Pline,Arc,Text,Spline — LPATS  
**Direct CAD command in menu/toolbar:** `LPATS`  
**Displayed shortcut(s):** `LPATS`  
**Menu location(s):** Math operations and calculations &gt; Math Operations and Objects  
**Toolbar(s):** 02 Numbers  
**Original English help:** Operations with Line, Pline, Spline, Arc, Text objects. The length of each line or the number in text takes part. Your numbers or distances can also be included.

#### `ID_LPI`
**English menu label:** Pools - Cisterns — LPI /PPI  
**Direct CAD command in menu/toolbar:** `LPI`  
**Displayed shortcut(s):** `LPI /PPI`  
**Menu location(s):** Topography &gt; Survey plan...step by step &gt; 3. Current plot layout &gt; Constructions · Lines &gt; Draw by typing command &gt; Basic line for Topography and Maps &gt; Constructions  
**Original English help:** Line, pline or arc for Swimming Pools - Tanks. Limits of floor hole or cover construction.

#### `ID_LPK`
**English menu label:** Hidden projection — LPK · Hidden projections — LPK / PPK  
**Direct CAD command in menu/toolbar:** `LPK`  
**Displayed shortcut(s):** `LPK`, `LPK / PPK`  
**Menu location(s):** Floor plans &gt; Floor plan...step by step &gt; 2. Sections and pojections · Sections-Elevation plans &gt; Section...step by step &gt; 3. Draw · Sections-Elevation plans &gt; Elevation view...step by step &gt; 3. Draw · Lines &gt; Draw by typing command &gt; Basic linetypes for Floorplan, elevation, Section  
**Toolbar(s):** Section plan lines · Elevation plan lines · Floor plan lines  
**Original English help:** Line, pline or arc for Hidden Display Elements. (Screenings that are intermittent due to the fact that they do not appear due to areas covered by projections whose location is assumed)

#### `ID_LPO`
**English menu label:** Toe of slope — LPO / PPO  
**Direct CAD command in menu/toolbar:** `LPO`  
**Displayed shortcut(s):** `LPO / PPO`  
**Menu location(s):** Topography &gt; Survey plan...step by step &gt; 3. Current plot layout &gt; Land slopes · Lines &gt; Draw by typing command &gt; Basic line for Topography and Maps &gt; Land Slopes  
**Original English help:** Line, pline or arc for Pranus Foot.

#### `ID_LPOLEN`
**English menu label:** Urban Planning Section - Neighbourhood — PPOLEN  
**Direct CAD command in menu/toolbar:** `PPOLEN`  
**Displayed shortcut(s):** `PPOLEN`  
**Menu location(s):** Topography &gt; Survey plan...step by step &gt; 13. Mapping legislation lines · Lines &gt; Draw by typing command &gt; Basic line for Topography and Maps &gt; Urban Planning  
**Original English help:** Pline for Urban Unity - Neighborhood.

#### `ID_LPRL`
**English menu label:** Beach line — LPRL / PPRL  
**Direct CAD command in menu/toolbar:** `LPRL`  
**Displayed shortcut(s):** `LPRL / PPRL`  
**Menu location(s):** Topography &gt; Survey plan...step by step &gt; 13. Mapping legislation lines · Lines &gt; Draw by typing command &gt; Basic line for Topography and Maps &gt; Urban Planning  
**Original English help:** Line, pline or arc for provided Beach boundary.

#### `ID_LPROB`
**English menu label:** Projections — LPROB / PPROB  
**Direct CAD command in menu/toolbar:** `LPROB`  
**Displayed shortcut(s):** `LPROB / PPROB`  
**Menu location(s):** Floor plans &gt; Floor plan...step by step &gt; 2. Sections and pojections · Sections-Elevation plans &gt; Section...step by step &gt; 3. Draw · Sections-Elevation plans &gt; Elevation view...step by step &gt; 3. Draw · Lines &gt; Draw by typing command &gt; Basic linetypes for Floorplan, elevation, Section  
**Toolbar(s):** Section plan lines · Elevation plan lines · Floor plan lines  
**Original English help:** Line, pline or arc for 1st distance Views.

#### `ID_LPROB2`
**English menu label:** Projections 2nd distance — LPROB2 / PPROB2  
**Direct CAD command in menu/toolbar:** `LPROB2`  
**Displayed shortcut(s):** `LPROB2 / PPROB2`  
**Menu location(s):** Floor plans &gt; Floor plan...step by step &gt; 2. Sections and pojections · Sections-Elevation plans &gt; Section...step by step &gt; 3. Draw · Sections-Elevation plans &gt; Elevation view...step by step &gt; 3. Draw · Lines &gt; Draw by typing command &gt; Basic linetypes for Floorplan, elevation, Section  
**Toolbar(s):** Section plan lines · Elevation plan lines · Floor plan lines  
**Original English help:** Line, pline or arc for 2nd distance Views. (Secondary or second distance views.

#### `ID_LPROB3`
**English menu label:** Projections 2nd distance — LPROB3 / PPROB3 · Hidden projections 3rd distance — LPROB3 / PPROB3 · Projections 3rd distance — LPROB3 / PPROB3  
**Direct CAD command in menu/toolbar:** `LPROB3`  
**Displayed shortcut(s):** `LPROB3 / PPROB3`  
**Menu location(s):** Sections-Elevation plans &gt; Section...step by step &gt; 3. Draw · Sections-Elevation plans &gt; Elevation view...step by step &gt; 3. Draw · Lines &gt; Draw by typing command &gt; Basic linetypes for Floorplan, elevation, Section  
**Toolbar(s):** Section plan lines · Elevation plan lines  
**Original English help:** No matching HELPSTRINGS description in this MNU. Refer to the menu label and original manual.

#### `ID_LPSE`
**English menu label:** Suspended ceilings — LPSE / PPSE · Suspended ceilings section — LPSE / PPSE  
**Direct CAD command in menu/toolbar:** `LPSE`  
**Displayed shortcut(s):** `LPSE / PPSE`  
**Menu location(s):** Sections-Elevation plans &gt; Section...step by step &gt; 3. Draw · Lines &gt; Draw by typing command &gt; Basic linetypes for Floorplan, elevation, Section  
**Toolbar(s):** Section plan lines  
**Original English help:** Line, pline or arc for Suspended ceilings section.

#### `ID_LREM`
**English menu label:** Stream bounadary line — LREM / PREM  
**Direct CAD command in menu/toolbar:** `LREM`  
**Displayed shortcut(s):** `LREM / PREM`  
**Menu location(s):** Topography &gt; Survey plan...step by step &gt; 13. Mapping legislation lines · Lines &gt; Draw by typing command &gt; Basic line for Topography and Maps &gt; Urban Planning  
**Original English help:** Line, pline or arc for Boundary Stream boundaries.

#### `ID_LREYMA`
**English menu label:** Aerial power line — LREYMA / PREYMA · Aerial power Line — LREYMA / PREYMA  
**Direct CAD command in menu/toolbar:** `PREYMA`  
**Displayed shortcut(s):** `LREYMA / PREYMA`  
**Menu location(s):** Topography &gt; Survey plan...step by step &gt; 3. Current plot layout &gt; Roads - Limits - Boundaries · Lines &gt; Draw by typing command &gt; Basic line for Topography and Maps &gt; Roads - Lines - Boundaries  
**Original English help:** Line, pline or arc for aerial power line.

#### `ID_LRG`
**English menu label:** City plan official street line — LRG / PRG · Street plan line — LRG / PRG  
**Direct CAD command in menu/toolbar:** `LRG`  
**Displayed shortcut(s):** `LRG / PRG`  
**Menu location(s):** Topography &gt; Survey plan...step by step &gt; 13. Mapping legislation lines · Lines &gt; Draw by typing command &gt; Basic line for Topography and Maps &gt; Urban Planning  
**Original English help:** Line, pline or arc for planned Road Planning.

#### `ID_LRGK`
**English menu label:** Abolished street plan lines — LRGK / PRGK · Abolished street plan line — LRGK / PRGK  
**Direct CAD command in menu/toolbar:** `LRGK`  
**Displayed shortcut(s):** `LRGK / PRGK`  
**Menu location(s):** Topography &gt; Survey plan...step by step &gt; 13. Mapping legislation lines · Lines &gt; Draw by typing command &gt; Basic line for Topography and Maps &gt; Urban Planning  
**Original English help:** Line, pline or arc for Removable Road Planning.

#### `ID_LROG`
**English menu label:** Street plan and building line — LROG / PROG  
**Direct CAD command in menu/toolbar:** `LROG`  
**Displayed shortcut(s):** `LROG / PROG`  
**Menu location(s):** Topography &gt; Survey plan...step by step &gt; 13. Mapping legislation lines · Lines &gt; Draw by typing command &gt; Basic line for Topography and Maps &gt; Urban Planning  
**Original English help:** Line, pline or arc for planned Road and Building.

#### `ID_LROMBOI`
**English menu label:** Rhombus — LROMBOI / PROMBOI  
**Direct CAD command in menu/toolbar:** `PROMBOI`  
**Displayed shortcut(s):** `LROMBOI / PROMBOI`  
**Menu location(s):** Lines &gt; Draw by typing command &gt; Various Lines &gt; Symbols Lines — # # # # # # &gt; only Symbols &gt; Squares,Circles,Rhombus,Stars,Crosses,Addition,Multiplication,Arrows  
**Original English help:** Line, pline or arc for Rhombuses. See the line with the ZLL command.

#### `ID_LROMBOI2`
**English menu label:** Rhombus (small space) — LROMBOI2 / PROMBOI2  
**Direct CAD command in menu/toolbar:** `PROMBOI2`  
**Displayed shortcut(s):** `LROMBOI2 / PROMBOI2`  
**Menu location(s):** Lines &gt; Draw by typing command &gt; Various Lines &gt; Symbols Lines — # # # # # # &gt; only Symbols &gt; Squares,Circles,Rhombus,Stars,Crosses,Addition,Multiplication,Arrows  
**Original English help:** Line, pline or arc for Rhombuses (small gap). See the line with the ZLL command.

#### `ID_LROMBOI3`
**English menu label:** Rhombus (no space) — LROMBOI3 / PROMBOI3  
**Direct CAD command in menu/toolbar:** `PROMBOI3`  
**Displayed shortcut(s):** `LROMBOI3 / PROMBOI3`  
**Menu location(s):** Lines &gt; Draw by typing command &gt; Various Lines &gt; Symbols Lines — # # # # # # &gt; only Symbols &gt; Squares,Circles,Rhombus,Stars,Crosses,Addition,Multiplication,Arrows  
**Original English help:** Line, pline or arc for Rhombuses (no gap). See the line with the ZLL command.

#### `ID_LSASTRA`
**English menu label:** Solid Stars — LSASTRA / PSASTRA  
**Direct CAD command in menu/toolbar:** `PSASTRA`  
**Displayed shortcut(s):** `LSASTRA / PSASTRA`  
**Menu location(s):** Lines &gt; Draw by typing command &gt; Various Lines &gt; Symbols Lines — # # # # # # &gt; only Symbols &gt; Squares,Circles,Rhombus,Stars,Crosses,Addition,Multiplication,Arrows  
**Original English help:** Line, pline or arc for Solid Stars. See the line with the ZLL command.

#### `ID_LSASTRA2`
**English menu label:** Solid Stars (small space) — LSASTRA2 / PSASTRA2  
**Direct CAD command in menu/toolbar:** `PSASTRA2`  
**Displayed shortcut(s):** `LSASTRA2 / PSASTRA2`  
**Menu location(s):** Lines &gt; Draw by typing command &gt; Various Lines &gt; Symbols Lines — # # # # # # &gt; only Symbols &gt; Squares,Circles,Rhombus,Stars,Crosses,Addition,Multiplication,Arrows  
**Original English help:** Line, pline or arc for Solid Stars (with small gaps). See the line with the ZLL command.

#### `ID_LSASTRA3`
**English menu label:** Solid Stars (no space) — LSASTRA3 / PSASTRA3  
**Direct CAD command in menu/toolbar:** `PSASTRA3`  
**Displayed shortcut(s):** `LSASTRA3 / PSASTRA3`  
**Menu location(s):** Lines &gt; Draw by typing command &gt; Various Lines &gt; Symbols Lines — # # # # # # &gt; only Symbols &gt; Squares,Circles,Rhombus,Stars,Crosses,Addition,Multiplication,Arrows  
**Original English help:** Line, pline or arc for Solid Stars (no gaps). See the line with the ZLL command.

#### `ID_LSBL1`
**English menu label:** Arrows — LSBL1 / PSBL1  
**Direct CAD command in menu/toolbar:** `PSBL1`  
**Displayed shortcut(s):** `LSBL1 / PSBL1`  
**Menu location(s):** Lines &gt; Draw by typing command &gt; Various Lines &gt; Symbols Lines — # # # # # # &gt; only Symbols &gt; Various Symbols  
**Original English help:** Line, pline or arc for Darts. See the line with the ZLL command.

#### `ID_LSBL10`
**English menu label:** Curved line 2x — LSBL10 / PSBL10  
**Direct CAD command in menu/toolbar:** `PSBL10`  
**Displayed shortcut(s):** `LSBL10 / PSBL10`  
**Menu location(s):** Lines &gt; Draw by typing command &gt; Various Lines &gt; Symbols Lines — # # # # # # &gt; only Symbols &gt; Various Symbols  
**Original English help:** Line, pline or arc for Peristopenia. See the line with the ZLL command.

#### `ID_LSBL11`
**English menu label:** Infinity symbol — LSBL11 / PSBL11  
**Direct CAD command in menu/toolbar:** `PSBL11`  
**Displayed shortcut(s):** `LSBL11 / PSBL11`  
**Menu location(s):** Lines &gt; Draw by typing command &gt; Various Lines &gt; Symbols Lines — # # # # # # &gt; only Symbols &gt; Various Symbols  
**Original English help:** Line, pline or arc for Infinity. See the line with the ZLL command.

#### `ID_LSBL12`
**English menu label:** Ellipse — LSBL12 / PSBL12  
**Direct CAD command in menu/toolbar:** `PSBL12`  
**Displayed shortcut(s):** `LSBL12 / PSBL12`  
**Menu location(s):** Lines &gt; Draw by typing command &gt; Various Lines &gt; Symbols Lines — # # # # # # &gt; only Symbols &gt; Various Symbols  
**Original English help:** Line, pline or arc for Ellipse. See the line with the ZLL command.

#### `ID_LSBL13`
**English menu label:** Ellipse Solid — LSBL13 / PSBL13  
**Direct CAD command in menu/toolbar:** `PSBL13`  
**Displayed shortcut(s):** `LSBL13 / PSBL13`  
**Menu location(s):** Lines &gt; Draw by typing command &gt; Various Lines &gt; Symbols Lines — # # # # # # &gt; only Symbols &gt; Various Symbols  
**Original English help:** Line, pline or arc for Solid Lack. See the line with the ZLL command.

#### `ID_LSBL14`
**English menu label:** Reflection — LSBL14 / PSBL14  
**Direct CAD command in menu/toolbar:** `PSBL14`  
**Displayed shortcut(s):** `LSBL14 / PSBL14`  
**Menu location(s):** Lines &gt; Draw by typing command &gt; Various Lines &gt; Symbols Lines — # # # # # # &gt; only Symbols &gt; Various Symbols  
**Original English help:** Line, pline or arc for Reflection. See the line with the ZLL command.

#### `ID_LSBL15`
**English menu label:** Hash — LSBL15 / PSBL15  
**Direct CAD command in menu/toolbar:** `PSBL15`  
**Displayed shortcut(s):** `LSBL15 / PSBL15`  
**Menu location(s):** Lines &gt; Draw by typing command &gt; Various Lines &gt; Symbols Lines — # # # # # # &gt; only Symbols &gt; Various Symbols  
**Original English help:** Line, pline or arc Drawing Design. See the line with the ZLL command.

#### `ID_LSBL16`
**English menu label:** zigzag — LSBL16 / PSBL16  
**Direct CAD command in menu/toolbar:** `PSBL16`  
**Displayed shortcut(s):** `LSBL16 / PSBL16`  
**Menu location(s):** Lines &gt; Draw by typing command &gt; Various Lines &gt; Symbols Lines — # # # # # # &gt; only Symbols &gt; Various Symbols  
**Original English help:** Line, pline or arc for zigzag. See the line with the ZLL command.

#### `ID_LSBL17`
**English menu label:** Exponent — LSBL17 / PSBL17  
**Direct CAD command in menu/toolbar:** `PSBL17`  
**Displayed shortcut(s):** `LSBL17 / PSBL17`  
**Menu location(s):** Lines &gt; Draw by typing command &gt; Various Lines &gt; Symbols Lines — # # # # # # &gt; only Symbols &gt; Various Symbols  
**Original English help:** Line, pline or arc for Exhibitor. See the line with the ZLL command.

#### `ID_LSBL18`
**English menu label:** Diacritis — LSBL18 / PSBL18  
**Direct CAD command in menu/toolbar:** `PSBL18`  
**Displayed shortcut(s):** `LSBL18 / PSBL18`  
**Menu location(s):** Lines &gt; Draw by typing command &gt; Various Lines &gt; Symbols Lines — # # # # # # &gt; only Symbols &gt; Various Symbols  
**Original English help:** Line, pline or arc for Tone. See the line with the ZLL command.

#### `ID_LSBL19`
**English menu label:** Shine — LSBL19 / PSBL18  
**Direct CAD command in menu/toolbar:** `PSBL19`  
**Displayed shortcut(s):** `LSBL19 / PSBL18`  
**Menu location(s):** Lines &gt; Draw by typing command &gt; Various Lines &gt; Symbols Lines — # # # # # # &gt; only Symbols &gt; Various Symbols  
**Original English help:** Line, pline or arc for Flash. See the line with the ZLL command.

#### `ID_LSBL2`
**English menu label:** Arrows perpendicular — LSBL2 / PSBL2  
**Direct CAD command in menu/toolbar:** `PSBL2`  
**Displayed shortcut(s):** `LSBL2 / PSBL2`  
**Menu location(s):** Lines &gt; Draw by typing command &gt; Various Lines &gt; Symbols Lines — # # # # # # &gt; only Symbols &gt; Various Symbols  
**Original English help:** Line, pline or arc for Darts vertically. See the line with the ZLL command.

#### `ID_LSBL3`
**English menu label:** Triangle — LSBL3 / PSBL3  
**Direct CAD command in menu/toolbar:** `PSBL3`  
**Displayed shortcut(s):** `LSBL3 / PSBL3`  
**Menu location(s):** Lines &gt; Draw by typing command &gt; Various Lines &gt; Symbols Lines — # # # # # # &gt; only Symbols &gt; Various Symbols  
**Original English help:** Line, pline or arc for Triangle. See the line with the ZLL command.

#### `ID_LSBL4`
**English menu label:** Isosceles triangle — LSBL4 / PSBL4  
**Direct CAD command in menu/toolbar:** `PSBL4`  
**Displayed shortcut(s):** `LSBL4 / PSBL4`  
**Menu location(s):** Lines &gt; Draw by typing command &gt; Various Lines &gt; Symbols Lines — # # # # # # &gt; only Symbols &gt; Various Symbols  
**Original English help:** Line, pline or arc for an isosceles triangle. See the line with the ZLL command.

#### `ID_LSBL5`
**English menu label:** Circle with center — LSBL5 / PSBL5  
**Direct CAD command in menu/toolbar:** `PSBL5`  
**Displayed shortcut(s):** `LSBL5 / PSBL5`  
**Menu location(s):** Lines &gt; Draw by typing command &gt; Various Lines &gt; Symbols Lines — # # # # # # &gt; only Symbols &gt; Various Symbols  
**Original English help:** Line, pline or arc for Circle with Center. See the line with the ZLL command.

#### `ID_LSBL6`
**English menu label:** Circle with cross — LSBL6 / PSBL6  
**Direct CAD command in menu/toolbar:** `PSBL6`  
**Displayed shortcut(s):** `LSBL6 / PSBL6`  
**Menu location(s):** Lines &gt; Draw by typing command &gt; Various Lines &gt; Symbols Lines — # # # # # # &gt; only Symbols &gt; Various Symbols  
**Original English help:** Line, pline or arc for Circle with Cross. See the line with the ZLL command.

#### `ID_LSBL7`
**English menu label:** Equal sign — LSBL7 / PSBL7  
**Direct CAD command in menu/toolbar:** `PSBL7`  
**Displayed shortcut(s):** `LSBL7 / PSBL7`  
**Menu location(s):** Lines &gt; Draw by typing command &gt; Various Lines &gt; Symbols Lines — # # # # # # &gt; only Symbols &gt; Various Symbols  
**Original English help:** Line, pline or arc for Equal. See the line with the ZLL command.

#### `ID_LSBL8`
**English menu label:** Equal sign 3x — LSBL8 / PSBL8  
**Direct CAD command in menu/toolbar:** `PSBL8`  
**Displayed shortcut(s):** `LSBL8 / PSBL8`  
**Menu location(s):** Lines &gt; Draw by typing command &gt; Various Lines &gt; Symbols Lines — # # # # # # &gt; only Symbols &gt; Various Symbols  
**Original English help:** Line, pline or arc for Equal 3x. See the line with the ZLL command.

#### `ID_LSBL9`
**English menu label:** Curved line — LSBL9 / PSBL9  
**Direct CAD command in menu/toolbar:** `PSBL9`  
**Displayed shortcut(s):** `LSBL9 / PSBL9`  
**Menu location(s):** Lines &gt; Draw by typing command &gt; Various Lines &gt; Symbols Lines — # # # # # # &gt; only Symbols &gt; Various Symbols  
**Original English help:** Line, pline or arc for Peristopenia. See the line with the ZLL command.

#### `ID_LSBR`
**English menu label:** X covered veranda — LSBR / PSBR · X covered Veranda — LSBR / PSBR  
**Direct CAD command in menu/toolbar:** `LSBR`  
**Displayed shortcut(s):** `LSBR / PSBR`  
**Menu location(s):** Topography &gt; Survey plan...step by step &gt; 3. Current plot layout &gt; Constructions &gt; Veranda · Lines &gt; Draw by typing command &gt; Basic line for Topography and Maps &gt; Constructions &gt; Veranda  
**Original English help:** Line, pline or arc for X covered Terrace. When the terrace is covered this is indicated by continuous lines that cross its ends.

#### `ID_LSK`
**English menu label:** Staicases-stairs — LSK /PSK · Staicases-Stairs — LSK /PSK  
**Direct CAD command in menu/toolbar:** `LSK`  
**Displayed shortcut(s):** `LSK /PSK`  
**Menu location(s):** Topography &gt; Survey plan...step by step &gt; 3. Current plot layout &gt; Constructions · Lines &gt; Draw by typing command &gt; Basic line for Topography and Maps &gt; Constructions  
**Original English help:** Line, pline or arc for Stairs-Stairs.

#### `ID_LSKAL`
**English menu label:** Staircase — LSKAL / PSKAL · Staircases — LSKAL / PSKAL  
**Direct CAD command in menu/toolbar:** `LSKAL`  
**Displayed shortcut(s):** `LSKAL / PSKAL`  
**Menu location(s):** Floor plans &gt; Floor plan...step by step &gt; 2. Sections and pojections · Lines &gt; Draw by typing command &gt; Basic linetypes for Floorplan, elevation, Section  
**Toolbar(s):** Floor plan lines  
**Original English help:** Line, pline or arc for Stairs. (Stair limits, steps, ...)

#### `ID_LSKYK`
**English menu label:** Solid Circles — LSKYK / PSKYK  
**Direct CAD command in menu/toolbar:** `PSKYK`  
**Displayed shortcut(s):** `LSKYK / PSKYK`  
**Menu location(s):** Lines &gt; Draw by typing command &gt; Various Lines &gt; Symbols Lines — # # # # # # &gt; only Symbols &gt; Squares,Circles,Rhombus,Stars,Crosses,Addition,Multiplication,Arrows  
**Original English help:** Line, pline or arc for Solid Circles. See the line with the ZLL command.

#### `ID_LSKYK2`
**English menu label:** Solid Circles (small space) — LSKYK2 / PSKYK2  
**Direct CAD command in menu/toolbar:** `PSKYK2`  
**Displayed shortcut(s):** `LSKYK2 / PSKYK2`  
**Menu location(s):** Lines &gt; Draw by typing command &gt; Various Lines &gt; Symbols Lines — # # # # # # &gt; only Symbols &gt; Squares,Circles,Rhombus,Stars,Crosses,Addition,Multiplication,Arrows  
**Original English help:** Line, pline or arc for Solid Circles (with small gaps). See the line with the ZLL command.

#### `ID_LSKYK3`
**English menu label:** Solid Circles (no space) — LSKYK3 / PSKYK  
**Direct CAD command in menu/toolbar:** `PSKYK3`  
**Displayed shortcut(s):** `LSKYK3 / PSKYK`  
**Menu location(s):** Lines &gt; Draw by typing command &gt; Various Lines &gt; Symbols Lines — # # # # # # &gt; only Symbols &gt; Squares,Circles,Rhombus,Stars,Crosses,Addition,Multiplication,Arrows  
**Original English help:** Line, pline or arc for Solid Circles (no gaps). See the line with the ZLL command.

#### `ID_LSR`
**English menu label:** Barbed wire (fence) — LSR / PSR · Wire Mesh — LSR / PSR  
**Direct CAD command in menu/toolbar:** `LSR`  
**Displayed shortcut(s):** `LSR / PSR`  
**Menu location(s):** Topography &gt; Survey plan...step by step &gt; 3. Current plot layout &gt; Existing Boundary · Lines &gt; Draw by typing command &gt; Basic line for Topography and Maps &gt; Existing Boundary  
**Original English help:** Line, pline or arc for Wire.

#### `ID_LSTAYROI`
**English menu label:** Crosses — LSTAYROI / PSTAYROI  
**Direct CAD command in menu/toolbar:** `PSTAYROI`  
**Displayed shortcut(s):** `LSTAYROI / PSTAYROI`  
**Menu location(s):** Lines &gt; Draw by typing command &gt; Various Lines &gt; Symbols Lines — # # # # # # &gt; only Symbols &gt; Squares,Circles,Rhombus,Stars,Crosses,Addition,Multiplication,Arrows  
**Original English help:** Line, pline or arc for Crosses. See the line with the ZLL command

#### `ID_LSTAYROI2`
**English menu label:** Crosses (small space) — LSTAYROI2 / PSTAYROI2  
**Direct CAD command in menu/toolbar:** `PSTAYROI2`  
**Displayed shortcut(s):** `LSTAYROI2 / PSTAYROI2`  
**Menu location(s):** Lines &gt; Draw by typing command &gt; Various Lines &gt; Symbols Lines — # # # # # # &gt; only Symbols &gt; Squares,Circles,Rhombus,Stars,Crosses,Addition,Multiplication,Arrows  
**Original English help:** Line, pline or arc for Crosses (small gap). See the line with the ZLL command.

#### `ID_LSTAYROI3`
**English menu label:** Crosses (no space) — LSTAYROI3 / PSTAYROI3  
**Direct CAD command in menu/toolbar:** `PSTAYROI3`  
**Displayed shortcut(s):** `LSTAYROI3 / PSTAYROI3`  
**Menu location(s):** Lines &gt; Draw by typing command &gt; Various Lines &gt; Symbols Lines — # # # # # # &gt; only Symbols &gt; Squares,Circles,Rhombus,Stars,Crosses,Addition,Multiplication,Arrows  
**Original English help:** Line, pline or arc for Crosses (no space). See the line with the ZLL command.

#### `ID_LSTET`
**English menu label:** Solid Squares — LSTET / PSTET  
**Direct CAD command in menu/toolbar:** `PSTET`  
**Displayed shortcut(s):** `LSTET / PSTET`  
**Menu location(s):** Lines &gt; Draw by typing command &gt; Various Lines &gt; Symbols Lines — # # # # # # &gt; only Symbols &gt; Squares,Circles,Rhombus,Stars,Crosses,Addition,Multiplication,Arrows  
**Original English help:** Line, pline or arc for Solid Squares. See the line with the ZLL command.

#### `ID_LSTET2`
**English menu label:** Solid Squares (small space) — LSTET2 / PSTET2  
**Direct CAD command in menu/toolbar:** `PSTET2`  
**Displayed shortcut(s):** `LSTET2 / PSTET2`  
**Menu location(s):** Lines &gt; Draw by typing command &gt; Various Lines &gt; Symbols Lines — # # # # # # &gt; only Symbols &gt; Squares,Circles,Rhombus,Stars,Crosses,Addition,Multiplication,Arrows  
**Original English help:** Line, pline or arc for Solid Squares (with small spaces). See the line with the ZLL command.

#### `ID_LSTET3`
**English menu label:** Solid Squares (no space) — LSTET3 / PSTET3  
**Direct CAD command in menu/toolbar:** `PSTET3`  
**Displayed shortcut(s):** `LSTET3 / PSTET3`  
**Menu location(s):** Lines &gt; Draw by typing command &gt; Various Lines &gt; Symbols Lines — # # # # # # &gt; only Symbols &gt; Squares,Circles,Rhombus,Stars,Crosses,Addition,Multiplication,Arrows  
**Original English help:** Line, pline or arc for Solid Squares (no spaces). See the line with the ZLL command.

#### `ID_LSTOA`
**English menu label:** covered passageway — LSTOA / PSTOA  
**Direct CAD command in menu/toolbar:** `LSTOA`  
**Displayed shortcut(s):** `LSTOA / PSTOA`  
**Menu location(s):** Topography &gt; Survey plan...step by step &gt; 13. Mapping legislation lines · Lines &gt; Draw by typing command &gt; Basic line for Topography and Maps &gt; Urban Planning  
**Original English help:** Line, pline or arc for intended Gallery.

#### `ID_LSVEL`
**English menu label:** Solid Arrows — LSVEL / PSVEL  
**Direct CAD command in menu/toolbar:** `PSVEL`  
**Displayed shortcut(s):** `LSVEL / PSVEL`  
**Menu location(s):** Lines &gt; Draw by typing command &gt; Various Lines &gt; Symbols Lines — # # # # # # &gt; only Symbols &gt; Squares,Circles,Rhombus,Stars,Crosses,Addition,Multiplication,Arrows  
**Original English help:** Line, pline or arc for Solid Arrows. See the line with the ZLL command.

#### `ID_LSVEL2`
**English menu label:** Solid Arrows (small space) — LSVEL2 / PSVEL2  
**Direct CAD command in menu/toolbar:** `PSVEL2`  
**Displayed shortcut(s):** `LSVEL2 / PSVEL2`  
**Menu location(s):** Lines &gt; Draw by typing command &gt; Various Lines &gt; Symbols Lines — # # # # # # &gt; only Symbols &gt; Squares,Circles,Rhombus,Stars,Crosses,Addition,Multiplication,Arrows  
**Original English help:** Line, pline or arc for Solid Arrows (small gap). See the line with the ZLL command.

#### `ID_LSVEL3`
**English menu label:** Solid Arrows (no space) — LSVEL3 / PSVEL3  
**Direct CAD command in menu/toolbar:** `PSVEL3`  
**Displayed shortcut(s):** `LSVEL3 / PSVEL3`  
**Menu location(s):** Lines &gt; Draw by typing command &gt; Various Lines &gt; Symbols Lines — # # # # # # &gt; only Symbols &gt; Squares,Circles,Rhombus,Stars,Crosses,Addition,Multiplication,Arrows  
**Original English help:** Line, pline or arc for Solid Arrows (no gap). See the line with the ZLL command.

#### `ID_LSYN`
**English menu label:** Addition — LSYN / PSYN  
**Direct CAD command in menu/toolbar:** `PSYN`  
**Displayed shortcut(s):** `LSYN / PSYN`  
**Menu location(s):** Lines &gt; Draw by typing command &gt; Various Lines &gt; Symbols Lines — # # # # # # &gt; only Symbols &gt; Squares,Circles,Rhombus,Stars,Crosses,Addition,Multiplication,Arrows  
**Original English help:** Plus line, pline or arc . View the line with the ZLL command.

#### `ID_LSYN2`
**English menu label:** Addition (small space) — LSYN2 / PSYN2  
**Direct CAD command in menu/toolbar:** `PSYN2`  
**Displayed shortcut(s):** `LSYN2 / PSYN2`  
**Menu location(s):** Lines &gt; Draw by typing command &gt; Various Lines &gt; Symbols Lines — # # # # # # &gt; only Symbols &gt; Squares,Circles,Rhombus,Stars,Crosses,Addition,Multiplication,Arrows  
**Original English help:** Line, pline or arc for Plus (small gap). See the line with the ZLL command.

#### `ID_LSYN3`
**English menu label:** Addition (no space) — LSYN3 / PSYN3  
**Direct CAD command in menu/toolbar:** `PSYN3`  
**Displayed shortcut(s):** `LSYN3 / PSYN3`  
**Menu location(s):** Lines &gt; Draw by typing command &gt; Various Lines &gt; Symbols Lines — # # # # # # &gt; only Symbols &gt; Squares,Circles,Rhombus,Stars,Crosses,Addition,Multiplication,Arrows  
**Original English help:** Line, pline or arc for Plus (no space). See the line with the ZLL command.

#### `ID_LSYNL`
**English menu label:** Calculations with Lines — L+L  
**Direct CAD command in menu/toolbar:** `L+L`  
**Displayed shortcut(s):** `L+L`  
**Menu location(s):** Math operations and calculations &gt; Math Operations and Objects &gt; By type  
**Toolbar(s):** 02 Numbers  
**Original English help:** Operate with Line items. The length of each line takes part. Your numbers or distances can also be included.

#### `ID_LT1`
**English menu label:** Dotted Line-1 — LT1 / PT1  
**Direct CAD command in menu/toolbar:** `LT1`  
**Displayed shortcut(s):** `LT1 / PT1`  
**Menu location(s):** Lines &gt; Draw by typing command &gt; Various Lines &gt; Dotted Line — . . . . . .  
**Original English help:** Line, pline or arc for Dots-1. View the verticals with the ZLL command.

#### `ID_LT2`
**English menu label:** Dotted Line-2 — LT2 / PT2  
**Direct CAD command in menu/toolbar:** `LT2`  
**Displayed shortcut(s):** `LT2 / PT2`  
**Menu location(s):** Lines &gt; Draw by typing command &gt; Various Lines &gt; Dotted Line — . . . . . .  
**Original English help:** Line, pline or arc for Dots-2. View the verticals with the ZLL command.

#### `ID_LT3`
**English menu label:** Dotted Line-3 — LT3 / PT3  
**Direct CAD command in menu/toolbar:** `LT3`  
**Displayed shortcut(s):** `LT3 / PT3`  
**Menu location(s):** Lines &gt; Draw by typing command &gt; Various Lines &gt; Dotted Line — . . . . . .  
**Original English help:** Line, pline or arc for Dots-3. View the verticals with the ZLL command.

#### `ID_LTAL`
**English menu label:** Section of ather parititions — LTAL / PTAL · Section of parititions — LTAL / PTAL · Partition section — LTAL / PTAL  
**Direct CAD command in menu/toolbar:** `LTAL`  
**Displayed shortcut(s):** `LTAL / PTAL`  
**Menu location(s):** Floor plans &gt; Floor plan...step by step &gt; 2. Sections and pojections · Sections-Elevation plans &gt; Section...step by step &gt; 3. Draw · Sections-Elevation plans &gt; Elevation view...step by step &gt; 3. Draw · Lines &gt; Draw by typing command &gt; Basic linetypes for Floorplan, elevation, Section  
**Toolbar(s):** Section plan lines · Floor plan lines  
**Original English help:** Line, pline or arc for aluminum parititions.

#### `ID_LTDD`
**English menu label:** Other sections — LTDD / PTDD · Other sections — LDD / PTDD  
**Direct CAD command in menu/toolbar:** `LTDD`  
**Displayed shortcut(s):** `LTDD / PTDD`, `LDD / PTDD`  
**Menu location(s):** Floor plans &gt; Floor plan...step by step &gt; 2. Sections and pojections · Sections-Elevation plans &gt; Section...step by step &gt; 3. Draw · Sections-Elevation plans &gt; Elevation view...step by step &gt; 3. Draw · Lines &gt; Draw by typing command &gt; Basic linetypes for Floorplan, elevation, Section  
**Toolbar(s):** Section plan lines · Elevation plan lines · Floor plan lines  
**Original English help:** Line, pline or arc for sections of no structural elements (no columns or walls etc) or sections of secondary elements.

#### `ID_LTDK`
**English menu label:** Hidden section overall — LTDK · Hiden structure section — LTDK  
**Direct CAD command in menu/toolbar:** `LTDK`  
**Displayed shortcut(s):** `LTDK`  
**Menu location(s):** Floor plans &gt; Floor plan...step by step &gt; 2. Sections and pojections · Sections-Elevation plans &gt; Section...step by step &gt; 3. Draw · Lines &gt; Draw by typing command &gt; Basic linetypes for Floorplan, elevation, Section  
**Toolbar(s):** Section plan lines · Floor plan lines  
**Original English help:** Line, pline or arc for hidden structural elements tha are behind others or their place is estmated.

#### `ID_LTDM`
**English menu label:** Section of all structural elements — LTDM / PTDM · Section of all Structural Elements — LTDM / PTDM · Structural elements section — LTDM / PTDM  
**Direct CAD command in menu/toolbar:** `LTDM`  
**Displayed shortcut(s):** `LTDM / PTDM`  
**Menu location(s):** Floor plans &gt; Floor plan...step by step &gt; 2. Sections and pojections · Sections-Elevation plans &gt; Section...step by step &gt; 3. Draw · Sections-Elevation plans &gt; Elevation view...step by step &gt; 3. Draw · Lines &gt; Draw by typing command &gt; Basic linetypes for Floorplan, elevation, Section  
**Toolbar(s):** Section plan lines · Elevation plan lines · Floor plan lines  
**Original English help:** Line, pline or arc for section of all structural elements. Note: It is suggested to use tihs command if bearing struction and walls section are not seperated.

#### `ID_LTEP`
**English menu label:** Wall Lining section — LTEP / PTEP · Wall coating section — LTEP / PTEP · Wall Lining Section — LTEP / PTEP  
**Direct CAD command in menu/toolbar:** `LTEP`  
**Displayed shortcut(s):** `LTEP / PTEP`  
**Menu location(s):** Floor plans &gt; Floor plan...step by step &gt; 2. Sections and pojections · Sections-Elevation plans &gt; Section...step by step &gt; 3. Draw · Sections-Elevation plans &gt; Elevation view...step by step &gt; 3. Draw · Lines &gt; Draw by typing command &gt; Basic linetypes for Floorplan, elevation, Section  
**Toolbar(s):** Section plan lines · Floor plan lines  
**Original English help:** Line, pline or arc for Wall Lining Section.

#### `ID_LTET`
**English menu label:** Squares — LTET / PTET  
**Direct CAD command in menu/toolbar:** `PTET`  
**Displayed shortcut(s):** `LTET / PTET`  
**Menu location(s):** Lines &gt; Draw by typing command &gt; Various Lines &gt; Symbols Lines — # # # # # # &gt; only Symbols &gt; Squares,Circles,Rhombus,Stars,Crosses,Addition,Multiplication,Arrows  
**Original English help:** Line, pline or arc for Squares. See the line with the ZLL command.

#### `ID_LTET2`
**English menu label:** Squares (small space) — LTET2 / PTET2  
**Direct CAD command in menu/toolbar:** `PTET2`  
**Displayed shortcut(s):** `LTET2 / PTET2`  
**Menu location(s):** Lines &gt; Draw by typing command &gt; Various Lines &gt; Symbols Lines — # # # # # # &gt; only Symbols &gt; Squares,Circles,Rhombus,Stars,Crosses,Addition,Multiplication,Arrows  
**Original English help:** Line, pline or arc for Squares (with small spaces). See the line with the ZLL command.

#### `ID_LTET3`
**English menu label:** Squares (no space) — LTET3 / PTET3  
**Direct CAD command in menu/toolbar:** `PTET3`  
**Displayed shortcut(s):** `LTET3 / PTET3`  
**Menu location(s):** Lines &gt; Draw by typing command &gt; Various Lines &gt; Symbols Lines — # # # # # # &gt; only Symbols &gt; Squares,Circles,Rhombus,Stars,Crosses,Addition,Multiplication,Arrows  
**Original English help:** Line, pline or arc for Squares (no spaces). See the line with the ZLL command.

#### `ID_LTEX`
**English menu label:** Enineering structure — LTEX / PTEX · Technical Work — LTEX / PTEX  
**Direct CAD command in menu/toolbar:** `ltex`  
**Displayed shortcut(s):** `LTEX / PTEX`  
**Menu location(s):** Topography &gt; Survey plan...step by step &gt; 3. Current plot layout &gt; Constructions · Lines &gt; Draw by typing command &gt; Basic line for Topography and Maps &gt; Constructions  
**Original English help:** Line, pline or arc for Technical Project. Walls - supporting structures, gutters, pipes ...

#### `ID_LTK`
**English menu label:** Hidden wall section — LTK  
**Direct CAD command in menu/toolbar:** `LTK`  
**Displayed shortcut(s):** `LTK`  
**Menu location(s):** Floor plans &gt; Floor plan...step by step &gt; 2. Sections and pojections · Sections-Elevation plans &gt; Section...step by step &gt; 3. Draw  
**Toolbar(s):** Section plan lines · Floor plan lines  
**Original English help:** Line, pline or arc for concealed hidden walls (not visible due to other elements in the first level) or walls whose location is assumed.

#### `ID_LTOIX`
**English menu label:** Wall section — LTOIX / PTOIX · Walls section — LTOIX / PTOIX  
**Direct CAD command in menu/toolbar:** `LTOIX`  
**Displayed shortcut(s):** `LTOIX / PTOIX`  
**Menu location(s):** Floor plans &gt; Floor plan...step by step &gt; 2. Sections and pojections · Sections-Elevation plans &gt; Section...step by step &gt; 3. Draw · Sections-Elevation plans &gt; Elevation view...step by step &gt; 3. Draw · Lines &gt; Draw by typing command &gt; Basic linetypes for Floorplan, elevation, Section  
**Toolbar(s):** Section plan lines · Elevation plan lines · Floor plan lines  
**Original English help:** Line, pline or arc for Wall Section (Brickwork, plasterboard ...)

#### `ID_LTT`
**English menu label:** Dots lines — LTT · Dotted line — LTT / PTT  
**Direct CAD command in menu/toolbar:** `LTT`  
**Displayed shortcut(s):** `LTT`, `LTT / PTT`  
**Menu location(s):** Floor plans &gt; Floor plan...step by step &gt; 2. Sections and pojections · Lines &gt; Draw by typing command &gt; Basic linetypes for Floorplan, elevation, Section  
**Toolbar(s):** Floor plan lines  
**Original English help:** Line, pline or arc with Telitses line. (Items that do not belong to another category such as floor marks.

#### `ID_LUP`
**English menu label:** Bottom view — LUP / PUP  
**Direct CAD command in menu/toolbar:** `LUP`  
**Displayed shortcut(s):** `LUP / PUP`  
**Menu location(s):** Topography &gt; Survey plan...step by step &gt; 3. Current plot layout &gt; Constructions · Lines &gt; Draw by typing command &gt; Basic line for Topography and Maps &gt; Constructions  
**Original English help:** Line, pline or arc for Elevation elements. (boundaries of entrance canopies, canopies under which there is an imprint, pergolas, etc.

#### `ID_LX1`
**English menu label:** Axis-1 — LX1 / PX1  
**Direct CAD command in menu/toolbar:** `LX1`  
**Displayed shortcut(s):** `LX1 / PX1`  
**Menu location(s):** Lines &gt; Draw by typing command &gt; Various Lines &gt; Axis — __ . __ . __ &gt; __ . __ . __ . __ .  
**Original English help:** Line, pline or arc for Axis-1. See the axes with the ZLL command.

#### `ID_LX2`
**English menu label:** Axis-2 — LX2 / PX2  
**Direct CAD command in menu/toolbar:** `LX2`  
**Displayed shortcut(s):** `LX2 / PX2`  
**Menu location(s):** Lines &gt; Draw by typing command &gt; Various Lines &gt; Axis — __ . __ . __ &gt; __ . __ . __ . __ .  
**Original English help:** Line, pline or arc for Axis-2. See the axes with the ZLL command.

#### `ID_LX3`
**English menu label:** Axis-3 — LX3 / PX3  
**Direct CAD command in menu/toolbar:** `LX3`  
**Displayed shortcut(s):** `LX3 / PX3`  
**Menu location(s):** Lines &gt; Draw by typing command &gt; Various Lines &gt; Axis — __ . __ . __ &gt; __ . __ . __ . __ .  
**Original English help:** Line, pline or arc for Axis-3. See the axes with the ZLL command.

#### `ID_LX4`
**English menu label:** Axis-4 — LX4 / PX4  
**Direct CAD command in menu/toolbar:** `LX4`  
**Displayed shortcut(s):** `LX4 / PX4`  
**Menu location(s):** Lines &gt; Draw by typing command &gt; Various Lines &gt; Axis — __ . __ . __ &gt; __ . __ . __ . __ .  
**Original English help:** Line, pline or arc for Axis-4. See the axes with the ZLL command.

#### `ID_LXAD`
**English menu label:** Original property axis — LXAD / PXAD  
**Direct CAD command in menu/toolbar:** `LXAD`  
**Displayed shortcut(s):** `LXAD / PXAD`  
**Menu location(s):** Topography &gt; Survey plan...step by step &gt; 14. Property boundary · Lines &gt; Draw by typing command &gt; Basic line for Topography and Maps &gt; Axis  
**Original English help:** Line, pline or arc for Home Ownership Axis.

#### `ID_LXAG`
**English menu label:** Conduit axis — LXAG / PXAG  
**Direct CAD command in menu/toolbar:** `LXAG`  
**Displayed shortcut(s):** `LXAG / PXAG`  
**Menu location(s):** Topography &gt; Survey plan...step by step &gt; 13. Mapping legislation lines · Lines &gt; Draw by typing command &gt; Basic line for Topography and Maps &gt; Axis  
**Original English help:** Line, pline or arc for Pipeline Shaft.

#### `ID_LXANAD`
**English menu label:** Land Reclamation Limits — LXANAD / PXANAD  
**Direct CAD command in menu/toolbar:** `LXANAD`  
**Displayed shortcut(s):** `LXANAD / PXANAD`  
**Menu location(s):** Lines &gt; Draw by typing command &gt; Basic line for Topography and Maps &gt; Axis  
**Original English help:** No matching HELPSTRINGS description in this MNU. Refer to the menu label and original manual.

#### `ID_LXDIAN`
**English menu label:** State distribution Limits — LXDIAN / PXDIAN  
**Direct CAD command in menu/toolbar:** `LXDIAN`  
**Displayed shortcut(s):** `LXDIAN / PXDIAN`  
**Menu location(s):** Lines &gt; Draw by typing command &gt; Basic line for Topography and Maps &gt; Axis  
**Original English help:** No matching HELPSTRINGS description in this MNU. Refer to the menu label and original manual.

#### `ID_LXDOYL`
**English menu label:** Concession limits — LXDOYL / PXDOYL  
**Direct CAD command in menu/toolbar:** `LXDOYL`  
**Displayed shortcut(s):** `LXDOYL / PXDOYL`  
**Menu location(s):** Lines &gt; Draw by typing command &gt; Basic line for Topography and Maps &gt; Axis  
**Original English help:** No matching HELPSTRINGS description in this MNU. Refer to the menu label and original manual.

#### `ID_LXG1`
**English menu label:** Axis3-1 — LXG1 / PXG1  
**Direct CAD command in menu/toolbar:** `LXG1`  
**Displayed shortcut(s):** `LXG1 / PXG1`  
**Menu location(s):** Lines &gt; Draw by typing command &gt; Various Lines &gt; Axis — __ . __ . __ &gt; __ - __- __- __- __  
**Original English help:** Line, pline or arc for Axis3-1. See the axes with the ZLL command.

#### `ID_LXG2`
**English menu label:** Axis3-2 — LXG2 / PXG2  
**Direct CAD command in menu/toolbar:** `LXG2`  
**Displayed shortcut(s):** `LXG2 / PXG2`  
**Menu location(s):** Lines &gt; Draw by typing command &gt; Various Lines &gt; Axis — __ . __ . __ &gt; __ - __- __- __- __  
**Original English help:** Line, pline or arc for Axis3-2. See the axes with the ZLL command.

#### `ID_LXG3`
**English menu label:** Axis3-3 — LXG3 / PXG3  
**Direct CAD command in menu/toolbar:** `LXG3`  
**Displayed shortcut(s):** `LXG3 / PXG3`  
**Menu location(s):** Lines &gt; Draw by typing command &gt; Various Lines &gt; Axis — __ . __ . __ &gt; __ - __- __- __- __  
**Original English help:** Line, pline or arc for Axis3-3. See the axes with the ZLL command.

#### `ID_LXG4`
**English menu label:** Axis3-4 — LXG4 / PXG4  
**Direct CAD command in menu/toolbar:** `LXG4`  
**Displayed shortcut(s):** `LXG4 / PXG4`  
**Menu location(s):** Lines &gt; Draw by typing command &gt; Various Lines &gt; Axis — __ . __ . __ &gt; __ - __- __- __- __  
**Original English help:** Line, pline or arc for Axis3-4. See the axes with the ZLL command.

#### `ID_LXGG1`
**English menu label:** Axis4-1 — LXGG1 / PXGG1  
**Direct CAD command in menu/toolbar:** `LXGG1`  
**Displayed shortcut(s):** `LXGG1 / PXGG1`  
**Menu location(s):** Lines &gt; Draw by typing command &gt; Various Lines &gt; Axis — __ . __ . __ &gt; __ -- __-- __-- __  
**Original English help:** Line, pline or arc for Axis4-1. See the axes with the ZLL command.

#### `ID_LXGG2`
**English menu label:** Axis4-2 — LXGG2 / PXGG2  
**Direct CAD command in menu/toolbar:** `LXGG2`  
**Displayed shortcut(s):** `LXGG2 / PXGG2`  
**Menu location(s):** Lines &gt; Draw by typing command &gt; Various Lines &gt; Axis — __ . __ . __ &gt; __ -- __-- __-- __  
**Original English help:** Line, pline or arc for Axis4-2. See the axes with the ZLL command.

#### `ID_LXGG3`
**English menu label:** Axis4-3 — LXGG3 / PXGG3  
**Direct CAD command in menu/toolbar:** `LXGG3`  
**Displayed shortcut(s):** `LXGG3 / PXGG3`  
**Menu location(s):** Lines &gt; Draw by typing command &gt; Various Lines &gt; Axis — __ . __ . __ &gt; __ -- __-- __-- __  
**Original English help:** Line, pline or arc for Axis4-3. See the axes with the ZLL command.

#### `ID_LXGG4`
**English menu label:** Axis4-4 — LXGG4 / PXGG4  
**Direct CAD command in menu/toolbar:** `LXGG4`  
**Displayed shortcut(s):** `LXGG4 / PXGG4`  
**Menu location(s):** Lines &gt; Draw by typing command &gt; Various Lines &gt; Axis — __ . __ . __ &gt; __ -- __-- __-- __  
**Original English help:** Line, pline or arc for Axis4-4. See the axes with the ZLL command.

#### `ID_LXID`
**English menu label:** Final property axis — LXID / PXID  
**Direct CAD command in menu/toolbar:** `LXID`  
**Displayed shortcut(s):** `LXID / PXID`  
**Menu location(s):** Topography &gt; Survey plan...step by step &gt; 14. Property boundary · Lines &gt; Draw by typing command &gt; Basic line for Topography and Maps &gt; Axis  
**Original English help:** Line, pline or arc for Final Ownership Axis.

#### `ID_LXKATH`
**English menu label:** Joint property axis — LXKATH / PXKATH  
**Direct CAD command in menu/toolbar:** `LXKATH`  
**Displayed shortcut(s):** `LXKATH / PXKATH`  
**Menu location(s):** Topography &gt; Survey plan...step by step &gt; 14. Property boundary · Lines &gt; Draw by typing command &gt; Basic line for Topography and Maps &gt; Axis  
**Original English help:** Line, pline or arc for Vertically Owned Axis.

#### `ID_LXKTHM`
**English menu label:** Cadaster axis — LXKTHM / PXKTHM  
**Direct CAD command in menu/toolbar:** `LXKTHM`  
**Displayed shortcut(s):** `LXKTHM / PXKTHM`  
**Menu location(s):** Topography &gt; Survey plan...step by step &gt; 14. Property boundary · Lines &gt; Draw by typing command &gt; Basic line for Topography and Maps &gt; Axis  
**Original English help:** No matching HELPSTRINGS description in this MNU. Refer to the menu label and original manual.

#### `ID_LXOD`
**English menu label:** Street axis — LXOD / PXOD  
**Direct CAD command in menu/toolbar:** `LXOD`  
**Displayed shortcut(s):** `LXOD / PXOD`  
**Menu location(s):** Topography &gt; Survey plan...step by step &gt; 13. Mapping legislation lines · Lines &gt; Draw by typing command &gt; Basic line for Topography and Maps &gt; Axis  
**Original English help:** Line, pline or arc for Road Axis.

#### `ID_LXOM`
**English menu label:** Dirt road — LXOM / PXO  
**Direct CAD command in menu/toolbar:** `LXOM`  
**Displayed shortcut(s):** `LXOM / PXO`  
**Menu location(s):** Topography &gt; Survey plan...step by step &gt; 3. Current plot layout &gt; Roads - Limits - Boundaries · Lines &gt; Draw by typing command &gt; Basic line for Topography and Maps &gt; Roads - Lines - Boundaries  
**Original English help:** Line, pline or arc for Dirt Road boundaries.

#### `ID_LXOMR`
**English menu label:** Coteriminous property boundaries — LXOMR / PXOMR  
**Direct CAD command in menu/toolbar:** `LXOMR`  
**Displayed shortcut(s):** `LXOMR / PXOMR`  
**Menu location(s):** Topography &gt; Survey plan...step by step &gt; 14. Property boundary · Lines &gt; Draw by typing command &gt; Basic line for Topography and Maps &gt; Axis  
**Original English help:** Line, pline or arc for Boundary Limits.

#### `ID_LXPEA`
**English menu label:** Initial property limits of urban plan — LXPEA / PXPEA  
**Direct CAD command in menu/toolbar:** `LXPEA`  
**Displayed shortcut(s):** `LXPEA / PXPEA`  
**Menu location(s):** Lines &gt; Draw by typing command &gt; Basic line for Topography and Maps &gt; Axis  
**Original English help:** No matching HELPSTRINGS description in this MNU. Refer to the menu label and original manual.

#### `ID_LXPET`
**English menu label:** Final property limits of urban plan — LXPET / PXPET  
**Direct CAD command in menu/toolbar:** `LXPET`  
**Displayed shortcut(s):** `LXPET / PXPET`  
**Menu location(s):** Lines &gt; Draw by typing command &gt; Basic line for Topography and Maps &gt; Axis  
**Original English help:** No matching HELPSTRINGS description in this MNU. Refer to the menu label and original manual.

#### `ID_LXX`
**English menu label:** Axon line — LXX / PXX · Axis line — LXX / PXX  
**Direct CAD command in menu/toolbar:** `LXX`  
**Displayed shortcut(s):** `LXX / PXX`  
**Menu location(s):** Floor plans &gt; Floor plan...step by step &gt; 2. Sections and pojections · Lines &gt; Draw by typing command &gt; Basic linetypes for Floorplan, elevation, Section  
**Toolbar(s):** Floor plan lines  
**Original English help:** Line, pline or arc for Axes.

#### `ID_LXX1`
**English menu label:** Axis2-1 — LXX1 / PXX1  
**Direct CAD command in menu/toolbar:** `LXX1`  
**Displayed shortcut(s):** `LXX1 / PXX1`  
**Menu location(s):** Lines &gt; Draw by typing command &gt; Various Lines &gt; Axis — __ . __ . __ &gt; __ .. __ .. __ .. __  
**Original English help:** Line, pline or arc for Axis2-1. See the axes with the ZLL command.

#### `ID_LXX2`
**English menu label:** Axis2-2 — LXX2 / PXX2  
**Direct CAD command in menu/toolbar:** `LXX2`  
**Displayed shortcut(s):** `LXX2 / PXX2`  
**Menu location(s):** Lines &gt; Draw by typing command &gt; Various Lines &gt; Axis — __ . __ . __ &gt; __ .. __ .. __ .. __  
**Original English help:** Line, pline or arc for Axis2-2. See the axes with the ZLL command.

#### `ID_LXX3`
**English menu label:** Axis2-3 — LXX3 / PXX3  
**Direct CAD command in menu/toolbar:** `LXX3`  
**Displayed shortcut(s):** `LXX3 / PXX3`  
**Menu location(s):** Lines &gt; Draw by typing command &gt; Various Lines &gt; Axis — __ . __ . __ &gt; __ .. __ .. __ .. __  
**Original English help:** Line, pline or arc for Axis2-3. See the axes with the ZLL command.

#### `ID_LXX4`
**English menu label:** Axis2-4 — LXX4 / PXX4  
**Direct CAD command in menu/toolbar:** `LXX4`  
**Displayed shortcut(s):** `LXX4 / PXX4`  
**Menu location(s):** Lines &gt; Draw by typing command &gt; Various Lines &gt; Axis — __ . __ . __ &gt; __ .. __ .. __ .. __  
**Original English help:** Line, pline or arc for Axis 2-4. See the axes with the ZLL command.

#### `ID_LYAG`
**English menu label:** Underground pipeline — LYAG / PYAG · Underground Conduit — LYAG / PYAG  
**Direct CAD command in menu/toolbar:** `PYAG`  
**Displayed shortcut(s):** `LYAG / PYAG`  
**Menu location(s):** Topography &gt; Survey plan...step by step &gt; 3. Current plot layout &gt; Roads - Limits - Boundaries · Lines &gt; Draw by typing command &gt; Basic line for Topography and Maps &gt; Roads - Lines - Boundaries  
**Original English help:** Line, pline or arc for underground pipeline axis.

#### `ID_LYT`
**English menu label:** High voltage wires — LYT / PYT · High Voltage — LYT / PYT  
**Direct CAD command in menu/toolbar:** `PYT`  
**Displayed shortcut(s):** `LYT / PYT`  
**Menu location(s):** Topography &gt; Survey plan...step by step &gt; 3. Current plot layout &gt; Roads - Limits - Boundaries · Lines &gt; Draw by typing command &gt; Basic line for Topography and Maps &gt; Roads - Lines - Boundaries  
**Original English help:** Line, pline or arc for High Voltage aerial line

#### `ID_LZOE`
**English menu label:** ZOE Boundary — LZOE / PZOE  
**Direct CAD command in menu/toolbar:** `LZOE`  
**Displayed shortcut(s):** `LZOE / PZOE`  
**Menu location(s):** Topography &gt; Survey plan...step by step &gt; 13. Mapping legislation lines · Lines &gt; Draw by typing command &gt; Basic line for Topography and Maps &gt; Urban Planning  
**Original English help:** Line, pline or arc for ZOE Limit.

### MNU M {#mnu-m}

#### `ID_MBL`
**English menu label:** 6. Insert Symbols — MBL · I n s e r t Scaled symbols — MBL  
**Direct CAD command in menu/toolbar:** `MBL`  
**Displayed shortcut(s):** `MBL`  
**Menu location(s):** Topography &gt; Survey plan...step by step · Blocks (symbols) &gt; Insert Symbols &gt; Symbols relative to print scale  
**Toolbar(s):** Symbols relative to print scale  
**Original English help:** Insert blocks from a Library in a sizerelative to print range. You have the ability to type points, set a shift, and import coefficient. You can enrich the library with your own block.

#### `ID_MBLA`
**English menu label:** Insert symbols by choosing search path — MBLA  
**Direct CAD command in menu/toolbar:** `MBLA`  
**Displayed shortcut(s):** `MBLA`  
**Menu location(s):** Blocks (symbols) &gt; Insert Symbols &gt; Symbols relative to print scale  
**Toolbar(s):** Symbols relative to print scale  
**Original English help:** Insert blocks in a sizerelative to print range. The selection is made from a Windows window and you can choose any drawing to import.

#### `ID_MBLADIR`
**English menu label:** Open folder — MBLADIR  
**Direct CAD command in menu/toolbar:** `MBLADIR`  
**Displayed shortcut(s):** `MBLADIR`  
**Menu location(s):** Blocks (symbols) &gt; Insert Symbols &gt; Symbols relative to print scale  
**Toolbar(s):** Symbols relative to print scale  
**Original English help:** Open the folder containing the block that was last inserted with the MBLA command.

#### `ID_MBLCHDIR`
**English menu label:** Change Scaled symbols search path — MBLCHDIR  
**Direct CAD command in menu/toolbar:** `MBLCHDIR`  
**Displayed shortcut(s):** `MBLCHDIR`  
**Menu location(s):** Blocks (symbols) &gt; Insert Symbols &gt; Symbols relative to print scale  
**Toolbar(s):** Symbols relative to print scale  
**Original English help:** Define the path where the folders with the blocks that are imported in scale are located. Path can also be on network.

#### `ID_MBLDIR`
**English menu label:** Open folder — MBLDIR  
**Direct CAD command in menu/toolbar:** `MBLDIR`  
**Displayed shortcut(s):** `MBLDIR`  
**Menu location(s):** Blocks (symbols) &gt; Insert Symbols &gt; Symbols relative to print scale  
**Toolbar(s):** Symbols relative to print scale  
**Original English help:** Open the Letter containing the blocks that are being imported in scale. You can with new folders configure categories or add new blocks.

#### `ID_MCC`
**English menu label:** Copy to point — MCC · Copy to a point — MCC  
**Direct CAD command in menu/toolbar:** `MCC`  
**Displayed shortcut(s):** `MCC`  
**Menu location(s):** Topography &gt; Survey plan...step by step &gt; 3a. Drawing Tools · Floor plans &gt; Floor plan...step by step &gt; 2a. Drawing tools · Sections-Elevation plans &gt; Section...step by step &gt; 3a. Section Drawing Tools · Sections-Elevation plans &gt; Elevation view...step by step &gt; 3a. Elevation Drawing tools  
**Toolbar(s):** Drawing tools · 16 Topography  
**Original English help:** Duplicate Copy items you select through filters in places you can type.

#### `ID_MIKRITOMI`
**English menu label:** Local sections — MTM  
**Direct CAD command in menu/toolbar:** `MTM`  
**Displayed shortcut(s):** `MTM`  
**Menu location(s):** Floor plans &gt; Floor plan...step by step &gt; 5. Annotations  
**Original English help:** No matching HELPSTRINGS description in this MNU. Refer to the menu label and original manual.

#### `ID_MJL`
**English menu label:** Arc by 3 points — MJL · Arcs by 3 points — MJL  
**Direct CAD command in menu/toolbar:** `MJL`  
**Displayed shortcut(s):** `MJL`  
**Menu location(s):** Topography &gt; Survey plan...step by step &gt; 3a. Drawing Tools · Floor plans &gt; Floor plan...step by step &gt; 2a. Drawing tools · Sections-Elevation plans &gt; Section...step by step &gt; 3a. Section Drawing Tools · Sections-Elevation plans &gt; Elevation view...step by step &gt; 3a. Elevation Drawing tools  
**Toolbar(s):** Drawing tools · 16 Topography  
**Original English help:** Arc creation with a choice of 3 points for which you can also enter block codes.

#### `ID_MK3`
**English menu label:** Circle by 3 points — MK3 · Circle by 3 Points — MK3  
**Direct CAD command in menu/toolbar:** `MK3`  
**Displayed shortcut(s):** `MK3`  
**Menu location(s):** Topography &gt; Survey plan...step by step &gt; 3a. Drawing Tools &gt; Circles · Floor plans &gt; Floor plan...step by step &gt; 2a. Drawing tools &gt; Circles · Sections-Elevation plans &gt; Section...step by step &gt; 3a. Section Drawing Tools &gt; Circles · Sections-Elevation plans &gt; Elevation view...step by step &gt; 3a. Elevation Drawing tools &gt; Circles  
**Toolbar(s):** Drawing tools · 16 Topography  
**Original English help:** Circle creation with a selection of 3 points which you can enter with block codes.

#### `ID_MKK`
**English menu label:** Circle by Center+Radius — MKK · Circle by center+Radius — MKK · Circle by center+radius — MKK  
**Direct CAD command in menu/toolbar:** `MKK`  
**Displayed shortcut(s):** `MKK`  
**Menu location(s):** Topography &gt; Survey plan...step by step &gt; 3a. Drawing Tools &gt; Circles · Floor plans &gt; Floor plan...step by step &gt; 2a. Drawing tools &gt; Circles · Sections-Elevation plans &gt; Section...step by step &gt; 3a. Section Drawing Tools &gt; Circles · Sections-Elevation plans &gt; Elevation view...step by step &gt; 3a. Elevation Drawing tools &gt; Circles  
**Toolbar(s):** Drawing tools · 16 Topography  
**Original English help:** Circle creation giving center and radius. You can also enter block codes for the center

#### `ID_MKO`
**English menu label:** Rising points to elevation plan — MKO  
**Direct CAD command in menu/toolbar:** `MKO`  
**Displayed shortcut(s):** `MKO`  
**Menu location(s):** Sections-Elevation plans &gt; Points  
**Toolbar(s):** 14a Section  step by step · 14b Elevation step by step  
**Original English help:** You select 2 points (left and right Side) and based on these the views of the points (block) you select are recorded in a file. Each line of the file is in the format: CODE, X, Y, Z, L (distance from View bar).

#### `ID_MLL`
**English menu label:** Line sdbox — MLL  
**Direct CAD command in menu/toolbar:** `MLL`  
**Displayed shortcut(s):** `MLL`  
**Menu location(s):** Lines &gt; Draw by typing command  
**Toolbar(s):** 16 Topography  
**Original English help:** Draw line or arc on current layer. During the design you can construct points, type them, give a series of points and be informed about 3D points.

#### `ID_MOF`
**English menu label:** Offset to Point — MOF · Offset to point — MOF · Offset to a point — MOF  
**Direct CAD command in menu/toolbar:** `MOF`  
**Displayed shortcut(s):** `MOF`  
**Menu location(s):** Topography &gt; Survey plan...step by step &gt; 3a. Drawing Tools · Floor plans &gt; Floor plan...step by step &gt; 2a. Drawing tools · Sections-Elevation plans &gt; Section...step by step &gt; 3a. Section Drawing Tools · Sections-Elevation plans &gt; Elevation view...step by step &gt; 3a. Elevation Drawing tools  
**Toolbar(s):** Drawing tools · 16 Topography  
**Original English help:** Offset object to a point where you can also type.

#### `ID_MPL`
**English menu label:** Polyline sdbox — MPL  
**Direct CAD command in menu/toolbar:** `MPL`  
**Displayed shortcut(s):** `MPL`  
**Menu location(s):** Lines &gt; Draw by typing command  
**Toolbar(s):** 16 Topography  
**Original English help:** Draw polyline or arc on current layer. During the design you can construct points, type them, give a series of points and be informed about 3D points.

#### `ID_MR2`
**English menu label:** Rectangle by 2 points — MR2 · Rectangle by 2 Points — MR2  
**Direct CAD command in menu/toolbar:** `MR2`  
**Displayed shortcut(s):** `MR2`  
**Menu location(s):** Topography &gt; Survey plan...step by step &gt; 3a. Drawing Tools · Floor plans &gt; Floor plan...step by step &gt; 2a. Drawing tools · Sections-Elevation plans &gt; Section...step by step &gt; 3a. Section Drawing Tools · Sections-Elevation plans &gt; Elevation view...step by step &gt; 3a. Elevation Drawing tools  
**Toolbar(s):** Drawing tools · 16 Topography  
**Original English help:** Rectangle creation with a choice of 2 points which you can also enter with block codes.

#### `ID_MR3`
**English menu label:** Rectangle by 3 points — MR3 · Rectangle by 3 Points — MR3  
**Direct CAD command in menu/toolbar:** `MR3`  
**Displayed shortcut(s):** `MR3`  
**Menu location(s):** Topography &gt; Survey plan...step by step &gt; 3a. Drawing Tools · Floor plans &gt; Floor plan...step by step &gt; 2a. Drawing tools · Sections-Elevation plans &gt; Section...step by step &gt; 3a. Section Drawing Tools · Sections-Elevation plans &gt; Elevation view...step by step &gt; 3a. Elevation Drawing tools  
**Toolbar(s):** Drawing tools · 16 Topography  
**Original English help:** Rectangle creation with a selection of 3 points which you can enter with block codes.

#### `ID_MRS`
**English menu label:** Square by 2 points for side — MRS  
**Direct CAD command in menu/toolbar:** `MRS`  
**Displayed shortcut(s):** `MRS`  
**Menu location(s):** Topography &gt; Survey plan...step by step &gt; 3a. Drawing Tools · Floor plans &gt; Floor plan...step by step &gt; 2a. Drawing tools · Sections-Elevation plans &gt; Section...step by step &gt; 3a. Section Drawing Tools  
**Toolbar(s):** Drawing tools  
**Original English help:** No matching HELPSTRINGS description in this MNU. Refer to the menu label and original manual.

#### `ID_MSP`
**English menu label:** Spline by multiple points — MSP · Spline by Points — MSP · Spline by points — MSP  
**Direct CAD command in menu/toolbar:** `MSP`  
**Displayed shortcut(s):** `MSP`  
**Menu location(s):** Topography &gt; Survey plan...step by step &gt; 3a. Drawing Tools · Floor plans &gt; Floor plan...step by step &gt; 2a. Drawing tools · Sections-Elevation plans &gt; Section...step by step &gt; 3a. Section Drawing Tools · Sections-Elevation plans &gt; Elevation view...step by step &gt; 3a. Elevation Drawing tools  
**Toolbar(s):** Drawing tools · 16 Topography  
**Original English help:** Spline creation by selecting as many points as you can and typing with block codes.

#### `ID_MTM`
**English menu label:** Local sections MTM  
**Direct CAD command in menu/toolbar:** `MTM`  
**Toolbar(s):** 15a Floor plan step by step · 15 Floor Plans  
**Original English help:** You select a point, direction and name and the symbol of the local Section is Result.

### MNU N {#mnu-n}

#### `ID_NN2`
**English menu label:** 16d. Buildability and Land registry notes — NN2  
**Direct CAD command in menu/toolbar:** `NN2`  
**Displayed shortcut(s):** `NN2`  
**Menu location(s):** Topography &gt; Survey plan...step by step  
**Toolbar(s):** 10 Annotations · 16a Survey plan step by step  
**Original English help:** Indications (plain text) in 2 lines of Text. Procedure: 1. Texts from a library 2. Text Direction 3. Final Text Placement.

#### `ID_NNA`
**English menu label:** Text annotation (e.g. beton, cultivation) — NNA · Text annotation — NNA  
**Direct CAD command in menu/toolbar:** `NNA`  
**Displayed shortcut(s):** `NNA`  
**Menu location(s):** Topography &gt; Survey plan...step by step &gt; [7. Annotations · Floor plans &gt; Floor plan...step by step &gt; 5. Annotations · Sections-Elevation plans &gt; Section...step by step &gt; 9a. Other annotations · Sections-Elevation plans &gt; Elevation view...step by step &gt; 10. Annotations  
**Toolbar(s):** 10 Annotations · Rest of annotations · Annotations · Topography annotations  
**Original English help:** Indications (plain text) 1 series. Procedure: 1. Text from a library 2. Text Direction 3. Final Text Placement

#### `ID_NNAR`
**English menu label:** Numbering in circles — NNAR · Number inside circle — NNAR  
**Direct CAD command in menu/toolbar:** `NNAR`  
**Displayed shortcut(s):** `NNAR`  
**Menu location(s):** Floor plans &gt; Floor plan...step by step &gt; 5. Annotations · Sections-Elevation plans &gt; Section...step by step &gt; 9a. Other annotations · Sections-Elevation plans &gt; Elevation view...step by step &gt; 10. Annotations · Blocks (symbols) &gt; Insert Symbols &gt; Automated Numbering  
**Toolbar(s):** 03 Blocks · Rest of annotations · 15a Floor plan step by step  
**Original English help:** Group block placement with number with continuous numbering

#### `ID_NNB`
**English menu label:** Block annotation (e.g. sidewalk/limit) — NNB · Block annotation — NNB · 9. Block annotation — NNB  
**Direct CAD command in menu/toolbar:** `NNB`  
**Displayed shortcut(s):** `NNB`  
**Menu location(s):** Topography &gt; Survey plan...step by step &gt; [7. Annotations · Floor plans &gt; Floor plan...step by step &gt; 5. Annotations · Sections-Elevation plans &gt; Section...step by step · Sections-Elevation plans &gt; Elevation view...step by step &gt; 10. Annotations  
**Toolbar(s):** 10 Annotations · 14a Section  step by step · 14b Elevation step by step · Annotations · Topography annotations  
**Original English help:** Block indications with symbol. Options: 1. Reference Point 2. Side and Position of entry 3. Texts above and below the symbol with selection from library.

#### `ID_NNC`
**English menu label:** Custom annotation — NNC  
**Direct CAD command in menu/toolbar:** `NNC`  
**Displayed shortcut(s):** `NNC`  
**Menu location(s):** Floor plans &gt; Floor plan...step by step &gt; 5. Annotations · Sections-Elevation plans &gt; Section...step by step &gt; 9a. Other annotations · Sections-Elevation plans &gt; Elevation view...step by step &gt; 10. Annotations  
**Toolbar(s):** 10 Annotations · Rest of annotations · Annotations  
**Original English help:** You select the reference point of the indication, the beginning of the text entry, the paragraph is written and a circle is Result at the reference point and a line to the end of the longest sentence.

#### `ID_NND`
**English menu label:** Annotations in two columns — NND  
**Direct CAD command in menu/toolbar:** `NND`  
**Displayed shortcut(s):** `NND`  
**Menu location(s):** Floor plans &gt; Floor plan...step by step &gt; 5. Annotations  
**Toolbar(s):** 10 Annotations · Annotations  
**Original English help:** You select from 2 libraries the texts of each column and after giving the starting point the columns are Result aligned.

#### `ID_NNG`
**English menu label:** Vertical aligned annotations — NNG  
**Direct CAD command in menu/toolbar:** `NNG`  
**Displayed shortcut(s):** `NNG`  
**Menu location(s):** Sections-Elevation plans &gt; Section...step by step &gt; 9a. Other annotations · Sections-Elevation plans &gt; Elevation view...step by step &gt; 10. Annotations  
**Toolbar(s):** 10 Annotations · Rest of annotations  
**Original English help:** Specify the display position of the indicators (X to the right or left of the display area) and then the annotations are Result from the reference point to the limit (X). Then enter your own texts on the screen.

#### `ID_NNH`
**English menu label:** 8. Heights (from floor) — NNH  
**Direct CAD command in menu/toolbar:** `NNH`  
**Displayed shortcut(s):** `NNH`  
**Menu location(s):** Floor plans &gt; Floor plan...step by step  
**Toolbar(s):** 10 Annotations · 15a Floor plan step by step  
**Original English help:** Height indicator block for overhead projections with possibilities of calculations and operations.

#### `ID_NNM`
**English menu label:** 13bc. Area annotations — NNM · Street names — NNM · Big Annotations — NNM  
**Direct CAD command in menu/toolbar:** `NNM`  
**Displayed shortcut(s):** `NNM`  
**Menu location(s):** Topography &gt; Survey plan...step by step &gt; 13b. Urban planning annotations · Floor plans &gt; Floor plan...step by step &gt; 5. Annotations · Sections-Elevation plans &gt; Section...step by step &gt; 9a. Other annotations  
**Toolbar(s):** 10 Annotations · Rest of annotations · Annotations · Urban planning annotations  
**Original English help:** Indications large 1 series. Procedure: 1. Text from a library 2. Text Direction 3. Final Text Placement.

#### `ID_NNOD`
**English menu label:** Street names — NNOD · 5. Roads - Streets — NNOD  
**Direct CAD command in menu/toolbar:** `NNOD`  
**Displayed shortcut(s):** `NNOD`  
**Menu location(s):** Topography &gt; Survey plan...step by step &gt; [7. Annotations · Sections-Elevation plans &gt; Section...step by step · Sections-Elevation plans &gt; Elevation view...step by step  
**Toolbar(s):** 10 Annotations · 14a Section  step by step · 14b Elevation step by step · Topography annotations  
**Original English help:** Street names. Procedure: 1. Text from a library 2. Text Direction 3. Final Text Placement.

#### `ID_NNP`
**English menu label:** Annotations by chart — NNP · 9. Material annotations by chart — NNP  
**Direct CAD command in menu/toolbar:** `NNP`  
**Displayed shortcut(s):** `NNP`  
**Menu location(s):** Floor plans &gt; Floor plan...step by step &gt; 5. Annotations · Sections-Elevation plans &gt; Elevation view...step by step  
**Toolbar(s):** 10 Annotations · 14b Elevation step by step · Annotations  
**Original English help:** You create a table (which can be common to all your proects) of which each row indicates the type and description, then place markers with the items in the Drawing and you can insert a memo with the items and descriptions.

#### `ID_NNPR`
**English menu label:** Annotation with arrow — NNT  
**Direct CAD command in menu/toolbar:** `NNT`  
**Displayed shortcut(s):** `NNT`  
**Menu location(s):** Sections-Elevation plans &gt; Elevation view...step by step &gt; 10. Annotations  
**Original English help:** No matching HELPSTRINGS description in this MNU. Refer to the menu label and original manual.

#### `ID_NNR`
**English menu label:** 4. Floor Annotations — NNR  
**Direct CAD command in menu/toolbar:** `NNR`  
**Displayed shortcut(s):** `NNR`  
**Menu location(s):** Sections-Elevation plans &gt; Section...step by step · Sections-Elevation plans &gt; Elevation view...step by step  
**Toolbar(s):** 10 Annotations · 14a Section  step by step · 14b Elevation step by step  
**Original English help:** Specify the display position of the indicators (X to the right or left of the display area) and then the indicators are Result from the reference point to the limit (X). Then select texts from a library.

#### `ID_NNT`
**English menu label:** Annotation with arrow (e.g. seashore) — NNT  
**Direct CAD command in menu/toolbar:** `NNT`  
**Displayed shortcut(s):** `NNT`  
**Menu location(s):** Topography &gt; Survey plan...step by step &gt; [7. Annotations  
**Toolbar(s):** 10 Annotations · Topography annotations  
**Original English help:** Arrow display (plain text) of many rows. Options: 1. Point and indication address 2. Text on the screen.

#### `ID_NNTOP`
**English menu label:** Area/place — NNTOP  
**Direct CAD command in menu/toolbar:** `NNTOP`  
**Displayed shortcut(s):** `NNTOP`  
**Menu location(s):** Topography &gt; Survey plan...step by step &gt; [7. Annotations  
**Toolbar(s):** 10 Annotations · Topography annotations  
**Original English help:** Toponyms areas. Procedure: 1. Text from a library 2. Text Direction 3. Final Text Placement.

#### `ID_NNX`
**English menu label:** Building usage — NNX · Space usage — NNX  
**Direct CAD command in menu/toolbar:** `NNX`  
**Displayed shortcut(s):** `NNX`  
**Menu location(s):** Topography &gt; Survey plan...step by step &gt; [7. Annotations · Floor plans &gt; Floor plan...step by step &gt; 5. Annotations · Sections-Elevation plans &gt; Section...step by step &gt; 9a. Other annotations · Sections-Elevation plans &gt; Elevation view...step by step &gt; 10. Annotations  
**Toolbar(s):** 10 Annotations · Rest of annotations · Annotations · Topography annotations  
**Original English help:** Indications (plain text) of 1 Series spaces. Procedure: 1. Text from a library 2. Text Direction 3. Final Text Placement

#### `ID_NNXY`
**English menu label:** Display coordinates — NNXY  
**Direct CAD command in menu/toolbar:** `NNXY`  
**Displayed shortcut(s):** `NNXY`  
**Menu location(s):** Floor plans &gt; Floor plan...step by step &gt; 5. Annotations  
**Toolbar(s):** 10 Annotations · Annotations  
**Original English help:** Enter the coordinates of each point (and the marking side) you select on the screen.

### MNU O {#mnu-o}

#### `ID_OFSLINS`
**English menu label:** Set lines offset  
**Menu location(s):** Offset &gt; Settings  
**Original English help:** This command sets the "lines" to extend at the point where they join during Offset.

#### `ID_OFSPTS`
**English menu label:** Set points offset  
**Menu location(s):** Offset &gt; Settings  
**Original English help:** This command defines during Offset each point of the created object to be far from the original the distance you have given.

#### `ID_OHHA`
**English menu label:** Hatch O p e n i n g — OHHA · 11a. Hatch opening — OHHA · opening — OHHA  
**Direct CAD command in menu/toolbar:** `ohha`, `OHHA`  
**Displayed shortcut(s):** `OHHA`  
**Menu location(s):** Sections-Elevation plans &gt; Section...step by step &gt; 10a. Hatch the rest · Sections-Elevation plans &gt; Elevation view...step by step · Hatch &gt; By typing &gt; Solid  
**Toolbar(s):** 14a Section  step by step · 14b Elevation step by step  
**Original English help:** Solid Hatch opening. View this type of Hatch or select another with the ZHI command.

#### `ID_OHHTZ`
**English menu label:** Hatch G l a s s — OHHTZ · 11. Hatch Glass — OHHTZ · Glass — OHHTZ  
**Direct CAD command in menu/toolbar:** `ohhtz`, `OHHTZ`  
**Displayed shortcut(s):** `OHHTZ`  
**Menu location(s):** Sections-Elevation plans &gt; Section...step by step &gt; 10a. Hatch the rest · Sections-Elevation plans &gt; Elevation view...step by step · Hatch &gt; By typing &gt; Solid  
**Toolbar(s):** 14a Section  step by step · 14b Elevation step by step  
**Original English help:** Solid Hatch Glass. See this type of Hatch or select another with the ZHI command.

#### `ID_OL`
**English menu label:** Offset to other layer — OL  
**Direct CAD command in menu/toolbar:** `OL`  
**Displayed shortcut(s):** `OL`  
**Menu location(s):** Offset  
**Toolbar(s):** 08 Offset  
**Original English help:** Object offset with simultaneous layer change.

#### `ID_OLAY`
**English menu label:** Isnert side view layers — OLAY  
**Direct CAD command in menu/toolbar:** `olay`, `OLAY`  
**Displayed shortcut(s):** `OLAY`  
**Menu location(s):** Sections-Elevation plans &gt; Elevation view...step by step &gt; 1. Layers  
**Toolbar(s):** 14b Elevation step by step  
**Original English help:** The standard layer for Elevation plan is imported. When commanding, define the abbreviation in 3 letters and then the commands will be assigned to the existing layers.

#### `ID_OLH`
**English menu label:** 1a. Interpretation of elevation layer OLH  
**Direct CAD command in menu/toolbar:** `OLH`  
**Toolbar(s):** 14b Elevation step by step  
**Original English help:** Opens the file with descriptions for the Face layers imported with the OLAY command.

#### `ID_OPSPAR`
**English menu label:** 3b. Window — OPSPAR  
**Direct CAD command in menu/toolbar:** `OPSPAR`  
**Displayed shortcut(s):** `OPSPAR`  
**Menu location(s):** Sections-Elevation plans &gt; Elevation view...step by step  
**Toolbar(s):** 14 Sections_Elevations · 14a Section  step by step · 14b Elevation step by step  
**Original English help:** Opens a form where you have options for repeating automatic window design by selecting only the center of the opening or 2 points next to the screen.

#### `ID_OSF`
**Original English help:** You select an Excel file and an error file is automatically created for Google Earth.

#### `ID_OSK`
**English menu label:** Staircase tread calculation and offset — OSK · Offset by width — OSK  
**Direct CAD command in menu/toolbar:** `OSK`  
**Displayed shortcut(s):** `OSK`  
**Menu location(s):** Floor plans &gt; Floor plan...step by step &gt; 2. Staircases - Ramps · Offset &gt; Offset by split lenght  
**Toolbar(s):** 08 Offset · Staircases and ramps  
**Original English help:** Offset of objects based on calculation of length and number of widths.

#### `ID_OSKM`
**English menu label:** Automated stair drawing · Offset by width mult. — OSKM  
**Direct CAD command in menu/toolbar:** `OSKM`  
**Displayed shortcut(s):** `OSKM`  
**Menu location(s):** Floor plans &gt; Floor plan...step by step &gt; 2. Staircases - Ramps · Offset &gt; Offset by split lenght  
**Toolbar(s):** 08 Offset · Staircases and ramps  
**Original English help:** Offset continuous based on calculation of length and number of backs.

#### `ID_OSNDLG`
**English menu label:** Set osnap NODE not for Text  
**Direct CAD command in menu/toolbar:** `OSNDLG`  
**Menu location(s):** Settings &gt; Various for Autocad  
**Toolbar(s):** 19 Settings  
**Original English help:** If you do not want Osnap NODE to select Texts, set the OSNAPNODELEGACY variable to 1. The command sets it automatically.

#### `ID_OSYNO`
**English menu label:** Calculations with Dimensions — O+O  
**Direct CAD command in menu/toolbar:** `O+O`  
**Displayed shortcut(s):** `O+O`  
**Menu location(s):** Math operations and calculations &gt; Math Operations and Objects &gt; By type  
**Toolbar(s):** 02 Numbers  
**Original English help:** Operates with the contents of Dimension objects. Only dimensions that have a real value take action.

### MNU P {#mnu-p}

#### `ID_P2A`
**English menu label:** Polyline to Arc — P2A  
**Direct CAD command in menu/toolbar:** `P2A`  
**Displayed shortcut(s):** `P2A`  
**Menu location(s):** Lines &gt; Manage Polyline/Spline  
**Toolbar(s):** 05 Lines  
**Original English help:** Convert Polyline to Curve Fit. The selected Polylines are redesigned with only arcs between the tops. They can be restored to their original form with the P2L command.

#### `ID_P2L`
**English menu label:** Polyline to Lines — P2L  
**Direct CAD command in menu/toolbar:** `P2L`  
**Displayed shortcut(s):** `P2L`  
**Menu location(s):** Lines &gt; Manage Polyline/Spline  
**Toolbar(s):** 05 Lines  
**Original English help:** Polyline redesign with straight sections.

#### `ID_P2S`
**English menu label:** Polyline to Spline — P2S  
**Direct CAD command in menu/toolbar:** `P2S`  
**Displayed shortcut(s):** `P2S`  
**Menu location(s):** Lines &gt; Manage Polyline/Spline  
**Toolbar(s):** 05 Lines  
**Original English help:** Convert Polyline to Spline Fit. The selected Polylines are smoothed with Splines between the tops. They can be restored to their original form with the P2L command.

#### `ID_PARATH`
**English menu label:** 3. Window — PARATH  
**Direct CAD command in menu/toolbar:** `parath`, `PARATH`  
**Displayed shortcut(s):** `PARATH`  
**Menu location(s):** Floor plans &gt; Floor plan...step by step  
**Toolbar(s):** 15a Floor plan step by step · 15 Floor Plans  
**Original English help:** Design of a typical window indication in floor plan (single, double, with internal or external shutter, superimposed or single with many partitions).

#### `ID_PDD`
**English menu label:** Double hidden — PDD  
**Direct CAD command in menu/toolbar:** `PDD`  
**Displayed shortcut(s):** `PDD`  
**Menu location(s):** Topography &gt; Survey plan...step by step &gt; 3. Current plot layout &gt; Existing Boundary · Lines &gt; Draw by typing command &gt; Basic line for Topography and Maps &gt; Existing Boundary  
**Original English help:** Double polyline hidden. Two parallel hidden lines at the desired distance from each other.

#### `ID_PDTM`
**English menu label:** 7. Set closed polygons — PDTM  
**Direct CAD command in menu/toolbar:** `PDTM`  
**Displayed shortcut(s):** `PDTM`  
**Menu location(s):** Topography &gt; Triangles - Contours - Volume &gt; Triangles  
**Toolbar(s):** 16b Triangles contours  
**Original English help:** Defined lines closed areas for later use of the ZDTM command. You can e.g. surround an entire area or set smaller individual enclosed areas to then apply triangulation by selecting a point in their center or selecting a polyline.

#### `ID_PFR`
**English menu label:** Crest of slope — PFR  
**Direct CAD command in menu/toolbar:** `PFR`  
**Displayed shortcut(s):** `PFR`  
**Menu location(s):** Topography &gt; Survey plan...step by step &gt; 3. Current plot layout &gt; Land slopes · Lines &gt; Draw by typing command &gt; Basic line for Topography and Maps &gt; Land Slopes  
**Original English help:** Slope crest polyline. The vertical lines are of alternating length (short - long).

#### `ID_PGG`
**English menu label:** Double line — PGG  
**Direct CAD command in menu/toolbar:** `PGG`  
**Displayed shortcut(s):** `PGG`  
**Menu location(s):** Floor plans &gt; Floor plan...step by step &gt; 2. Sections and pojections · Lines &gt; Draw by typing command &gt; Basic linetypes for Floorplan, elevation, Section  
**Toolbar(s):** Floor plan lines  
**Original English help:** No matching HELPSTRINGS description in this MNU. Refer to the menu label and original manual.

#### `ID_PH`
**English menu label:** 1. Insert photos symbol — PH  
**Direct CAD command in menu/toolbar:** `PH`  
**Displayed shortcut(s):** `PH`  
**Menu location(s):** Photos  
**Toolbar(s):** 17 Photos  
**Original English help:** Enter a position and address for taking photos with Photo number and continuous numbering.

#### `ID_PHKLIM`
**English menu label:** Set scale by A4 paper size — PHKLIM · 5. Photos scale — PHKLIM · Set printing scale according to A4 — PHKLIM  
**Direct CAD command in menu/toolbar:** `phklim`, `PHKLIM`  
**Displayed shortcut(s):** `PHKLIM`  
**Menu location(s):** PRINT SCALE: 1/ · Photos · Misc &gt; Insert paper  
**Toolbar(s):** 17 Photos  
**Original English help:** Selecting the large side of A4 paper as shown on the screen calculates the print scale.

#### `ID_PHKT`
**English menu label:** Building Hatch (open area) — PHKT  
**Direct CAD command in menu/toolbar:** `PHKT`  
**Displayed shortcut(s):** `PHKT`  
**Menu location(s):** Topography &gt; Survey plan...step by step &gt; 4. Building  
**Toolbar(s):** Building hatch and floors ind. · 16 Topography  
**Original English help:** Polyline is added with a type of building partial delineation line, at the points you give.

#### `ID_PHLIST`
**English menu label:** 2. Counting photos symbols — PHLIST  
**Direct CAD command in menu/toolbar:** `PHLIST`  
**Displayed shortcut(s):** `PHLIST`  
**Menu location(s):** Photos  
**Toolbar(s):** 17 Photos  
**Original English help:** Opens a file containing the names of the photos entered in the Drawing depending on each layer.

#### `ID_PHP`
**English menu label:** Hide smoothing Polyline — PHP  
**Direct CAD command in menu/toolbar:** `PHP`  
**Displayed shortcut(s):** `PHP`  
**Menu location(s):** Lines &gt; Manage Polyline/Spline  
**Toolbar(s):** 05 Lines  
**Original English help:** Hide the original Polylines and show only the smoothing results on those Polylines where the P2S command has been executed.

#### `ID_PHSTI1`
**English menu label:** 3. Lateral Photos title — PHSTI1  
**Direct CAD command in menu/toolbar:** `PHSTI1`  
**Displayed shortcut(s):** `PHSTI1`  
**Menu location(s):** Photos  
**Toolbar(s):** 17 Photos  
**Original English help:** Insert the phrase '' DRAWING PHOTOS 'POSITIONS' 'into the Drawing in size depending on the A4 paper side.

#### `ID_PHSTI2`
**English menu label:** 4. Photos title — PHSTI2 · Insert short title — PHSTI2  
**Direct CAD command in menu/toolbar:** `PHSTI2`  
**Displayed shortcut(s):** `PHSTI2`  
**Menu location(s):** Photos · Titles and legends &gt; T i t l e s  
**Toolbar(s):** 17 Photos · 18 Legends  
**Original English help:** Enter 5 lines of Text (Project, Employer, position, Date, Study Type, Design Type, scale) and Logo. Imported phrases remain in Autocad memory for import into another Drawing.

#### `ID_PKTPER`
**English menu label:** Ruin — PKTER  
**Direct CAD command in menu/toolbar:** `PKTER`  
**Displayed shortcut(s):** `PKTER`  
**Menu location(s):** Topography &gt; Survey plan...step by step &gt; 3. Current plot layout &gt; Constructions · Lines &gt; Draw by typing command &gt; Basic line for Topography and Maps &gt; Constructions  
**Original English help:** Double dotted 0.50 m thick pline for ruins.

#### `ID_PLCO`
**English menu label:** Change direction of Line Pline — PLCO  
**Direct CAD command in menu/toolbar:** `PLCO`  
**Displayed shortcut(s):** `PLCO`  
**Menu location(s):** Lines &gt; Manage Polyline/Spline  
**Toolbar(s):** 05 Lines  
**Original English help:** Change the Line and Pline direction. It is usually used in cases where commands related to the starting point of objects will then be executed.

#### `ID_PLL`
**English menu label:** Join to Polyline — PLL  
**Direct CAD command in menu/toolbar:** `PLL`  
**Displayed shortcut(s):** `PLL`  
**Menu location(s):** Lines &gt; Manage Polyline/Spline  
**Toolbar(s):** 05 Lines · Cadaster_Tools  
**Original English help:** Select through filters the objects to be joined into single Polylines.

#### `ID_PMD`
**English menu label:** Stonewall — PMD / LMD  
**Direct CAD command in menu/toolbar:** `PMD`  
**Displayed shortcut(s):** `PMD / LMD`  
**Menu location(s):** Topography &gt; Survey plan...step by step &gt; 3. Current plot layout &gt; Existing Boundary · Lines &gt; Draw by typing command &gt; Basic line for Topography and Maps &gt; Existing Boundary  
**Original English help:** Line, pline or arc for Mantra. Concrete wall, brickwork or concrete block placed for demarcation of areas. The 2nd line is designed in another layer for reasons of easy management of the external boundaries of the paddocks.

#### `ID_PMDD`
**English menu label:** Stonewall with 2nd line hidden — PMDD · Stonewall 2d line hidden — PMDD  
**Direct CAD command in menu/toolbar:** `PMDD`  
**Displayed shortcut(s):** `PMDD`  
**Menu location(s):** Topography &gt; Survey plan...step by step &gt; 3. Current plot layout &gt; Existing Boundary · Lines &gt; Draw by typing command &gt; Basic line for Topography and Maps &gt; Existing Boundary  
**Original English help:** Line, pline or arc for Mantra with the 2nd Intermittent. The hidden line refers to the case where the ground level coincides with the crown level of the paddock.

#### `ID_POP`
**English menu label:** Notes-2 ONN2  
**Direct CAD command in menu/toolbar:** `POP`  
**Toolbar(s):** 10 Annotations  
**Original English help:** Notes-Indications (Leader with dot) in 2nd predefined layer.

#### `ID_POPT`
**English menu label:** In situ check — POP  
**Direct CAD command in menu/toolbar:** `POPT`  
**Displayed shortcut(s):** `POP`  
**Menu location(s):** Topography &gt; Survey plan...step by step &gt; [7. Annotations · Floor plans &gt; Floor plan...step by step &gt; 5. Annotations · Sections-Elevation plans &gt; Section...step by step &gt; 9a. Other annotations · Sections-Elevation plans &gt; Elevation view...step by step &gt; 10. Annotations  
**Toolbar(s):** Rest of annotations · Annotations · Topography annotations  
**Original English help:** Indications (Leader with a dot) for notes in the drawing concerning an on-site inspection or an important note to be resolved prior to delivery. They are printed in red on all pens. But their layer must be closed during the final printing.

#### `ID_PORP`
**English menu label:** Street plan boundary — PORP  
**Direct CAD command in menu/toolbar:** `PORP`  
**Displayed shortcut(s):** `PORP`  
**Menu location(s):** Topography &gt; Survey plan...step by step &gt; 13. Mapping legislation lines · Lines &gt; Draw by typing command &gt; Basic line for Topography and Maps &gt; Urban Planning  
**Original English help:** Line, pline or arc for Road Area Limit. Road sub-area.

#### `ID_PORTA`
**English menu label:** 3. Door — PORTA  
**Direct CAD command in menu/toolbar:** `porta`, `PORTA`  
**Displayed shortcut(s):** `PORTA`  
**Menu location(s):** Floor plans &gt; Floor plan...step by step  
**Toolbar(s):** 15a Floor plan step by step · 15 Floor Plans  
**Original English help:** Design of a typical Door sign in plan view (plain without window, with 5x5 frame, with frame the entire thickness of the wall).

#### `ID_POV`
**English menu label:** Notes-2v VNN2  
**Direct CAD command in menu/toolbar:** `POV`  
**Toolbar(s):** 10 Annotations  
**Original English help:** Notes-Indications (leader with arrow) in 2nd predefined layer.

#### `ID_PP`
**English menu label:** Line perpendicular to object — PP  
**Direct CAD command in menu/toolbar:** `pp`, `PP`  
**Displayed shortcut(s):** `PP`  
**Menu location(s):** Lines  
**Toolbar(s):** 05 Lines  
**Original English help:** Line perpendicular to object. You choose: a. The side on which the line will be Result, b. the point at which it will be Result vertivad and c. the desired length of the vertical line.

#### `ID_PP1`
**English menu label:** Slope-1 — PP1  
**Direct CAD command in menu/toolbar:** `PP1`  
**Displayed shortcut(s):** `PP1`  
**Menu location(s):** Topography &gt; Survey plan...step by step &gt; 3. Current plot layout &gt; Land slopes · Lines &gt; Draw by typing command &gt; Basic line for Topography and Maps &gt; Land Slopes  
**Original English help:** Slope-1. With vertical lines of constant length A.

#### `ID_PP2`
**English menu label:** Slope-2 — PP2  
**Direct CAD command in menu/toolbar:** `PP2`  
**Displayed shortcut(s):** `PP2`  
**Menu location(s):** Topography &gt; Survey plan...step by step &gt; 3. Current plot layout &gt; Land slopes · Lines &gt; Draw by typing command &gt; Basic line for Topography and Maps &gt; Land Slopes  
**Original English help:** Slope-2. With vertical lines of constant length 0.5 * +.

#### `ID_PP3`
**English menu label:** Embankment — PP3  
**Direct CAD command in menu/toolbar:** `PP3`  
**Displayed shortcut(s):** `PP3`  
**Menu location(s):** Topography &gt; Survey plan...step by step &gt; 3. Current plot layout &gt; Land slopes · Lines &gt; Draw by typing command &gt; Basic line for Topography and Maps &gt; Land Slopes  
**Original English help:** Pline for embankment. The vertical lines are of alternating length (short - long) and are Result on both sides of the line.

#### `ID_PPERG`
**English menu label:** General urban planning area boundary — PPERG  
**Direct CAD command in menu/toolbar:** `PPERG`  
**Displayed shortcut(s):** `PPERG`  
**Menu location(s):** Topography &gt; Survey plan...step by step &gt; 13. Mapping legislation lines · Lines &gt; Draw by typing command &gt; Basic line for Topography and Maps &gt; Urban Planning  
**Original English help:** Pline for GIS Area Limit. GPS sub-area.

#### `ID_PPERZ`
**English menu label:** ZONE area boundary — PPERZ  
**Direct CAD command in menu/toolbar:** `PPERZ`  
**Displayed shortcut(s):** `PPERZ`  
**Menu location(s):** Topography &gt; Survey plan...step by step &gt; 13. Mapping legislation lines · Lines &gt; Draw by typing command &gt; Basic line for Topography and Maps &gt; Urban Planning  
**Original English help:** Pline ZONE Area Limit. ZONE subarea.

#### `ID_PPXR`
**English menu label:** Usage boundary — PPXR  
**Direct CAD command in menu/toolbar:** `PPXR`  
**Displayed shortcut(s):** `PPXR`  
**Menu location(s):** Topography &gt; Survey plan...step by step &gt; 13. Mapping legislation lines · Lines &gt; Draw by typing command &gt; Basic line for Topography and Maps &gt; Urban Planning  
**Original English help:** Pline Limit of Usage.

#### `ID_PRDIA`
**English menu label:** Division  
**Toolbar(s):** Select operation  
**Original English help:** No matching HELPSTRINGS description in this MNU. Refer to the menu label and original manual.

#### `ID_PRENAPROS`
**English menu label:** One to the result  
**Toolbar(s):** Select operation  
**Original English help:** No matching HELPSTRINGS description in this MNU. Refer to the menu label and original manual.

#### `ID_PREPI`
**English menu label:** Multiplication  
**Toolbar(s):** Select operation  
**Original English help:** No matching HELPSTRINGS description in this MNU. Refer to the menu label and original manual.

#### `ID_PRPLIN`
**English menu label:** Subtraction  
**Toolbar(s):** Select operation  
**Original English help:** No matching HELPSTRINGS description in this MNU. Refer to the menu label and original manual.

#### `ID_PSDG`
**English menu label:** Railway — PSDG  
**Direct CAD command in menu/toolbar:** `PSDG`  
**Displayed shortcut(s):** `PSDG`  
**Menu location(s):** Topography &gt; Survey plan...step by step &gt; 3. Current plot layout &gt; Roads - Limits - Boundaries · Lines &gt; Draw by typing command &gt; Basic line for Topography and Maps &gt; Roads - Lines - Boundaries  
**Original English help:** Pline Railway Design. This line is a symbol and implies both rails (usually with measurements in the center).

#### `ID_PSP`
**English menu label:** Show smoothing Polyline — PSP  
**Direct CAD command in menu/toolbar:** `PSP`  
**Displayed shortcut(s):** `PSP`  
**Menu location(s):** Lines &gt; Manage Polyline/Spline  
**Toolbar(s):** 05 Lines  
**Original English help:** Display the initial Polylines and the smoothing results on those Polylines where the P2S command is executed.

#### `ID_PSXD`
**English menu label:** City plan boundary — PSXD  
**Direct CAD command in menu/toolbar:** `PSXD`  
**Displayed shortcut(s):** `PSXD`  
**Menu location(s):** Topography &gt; Survey plan...step by step &gt; 13. Mapping legislation lines · Lines &gt; Draw by typing command &gt; Basic line for Topography and Maps &gt; Urban Planning  
**Original English help:** Line, pline or arc for City Plan Limit.

#### `ID_PSYNP`
**English menu label:** Calculations with PolyLines — P+P  
**Direct CAD command in menu/toolbar:** `P+P`  
**Displayed shortcut(s):** `P+P`  
**Menu location(s):** Math operations and calculations &gt; Math Operations and Objects &gt; By type  
**Toolbar(s):** 02 Numbers  
**Original English help:** Operations with Polyline type objects. The length of each Polyline takes place. Your numbers or distances can also be included.

#### `ID_PTHAM`
**English menu label:** Shrub fence — PTHAM · Plants fence — PTHAM  
**Direct CAD command in menu/toolbar:** `PTHAM`  
**Displayed shortcut(s):** `PTHAM`  
**Menu location(s):** Topography &gt; Survey plan...step by step &gt; 3. Current plot layout &gt; Existing Boundary · Lines &gt; Draw by typing command &gt; Basic line for Topography and Maps &gt; Existing Boundary  
**Original English help:** Line, pline or arc for Shrub Fence.

#### `ID_PXR`
**English menu label:** Dry stone wall — PXR  
**Direct CAD command in menu/toolbar:** `PXR`  
**Displayed shortcut(s):** `PXR`  
**Menu location(s):** Topography &gt; Survey plan...step by step &gt; 3. Current plot layout &gt; Existing Boundary · Lines &gt; Draw by typing command &gt; Basic line for Topography and Maps &gt; Existing Boundary  
**Original English help:** Pline for Drystone. The dry stone is Result in the desired width and 2 continuous lines on either side in another layer. When the dry stone is roughly made you can erase these lines.

### MNU Q {#mnu-q}

#### `ID_Q1`
**English menu label:** Break at 1 point — Q1  
**Direct CAD command in menu/toolbar:** `Q1`  
**Displayed shortcut(s):** `Q1`  
**Menu location(s):** Lines  
**Toolbar(s):** 05 Lines  
**Original English help:** Select the object that splits them in two, and then any point on the screen whose projection on the object will be the cutting point.

### MNU R {#mnu-r}

#### `ID_RAMPA`
**English menu label:** Climping ramp line — rampa · Ramp arrow — rampa  
**Direct CAD command in menu/toolbar:** `rampa`, `RAMPA`  
**Displayed shortcut(s):** `rampa`  
**Menu location(s):** Floor plans &gt; Floor plan...step by step &gt; 2. Staircases - Ramps · Lines &gt; Draw by typing command &gt; Lines with Arrows  
**Toolbar(s):** Staircases and ramps  
**Original English help:** Arrow of Rampas. Select the beginning, intermediate points of change of direction and the end of the ramp. Result: Continuous Polyline for the intermediate points and sharp Arrow at the end of the ramp.

#### `ID_RESETSAA`
**English menu label:** Reset all ON — RESETSAA  
**Direct CAD command in menu/toolbar:** `RESETSAA`  
**Displayed shortcut(s):** `RESETSAA`  
**Menu location(s):** Topography &gt; Survey plan...step by step &gt; 2a. Manage survey points &gt; 2ac. On-Off other layers  
**Original English help:** No matching HELPSTRINGS description in this MNU. Refer to the menu label and original manual.

#### `ID_RGOG`
**English menu label:** 13ba. Text of street plan and building lines — RGOG  
**Direct CAD command in menu/toolbar:** `RGOG`  
**Displayed shortcut(s):** `RGOG`  
**Menu location(s):** Topography &gt; Survey plan...step by step &gt; 13b. Urban planning annotations  
**Toolbar(s):** Urban planning annotations · 16 Topography  
**Original English help:** Indications (plain text) for road and building lines. You select beginning, address, internal point O.T. and lawn width. There is the possibility to indicate the T.E. or the D.E.

### MNU S {#mnu-s}

#### `ID_S2P`
**English menu label:** Spline to Polyline — S2P  
**Direct CAD command in menu/toolbar:** `S2P`  
**Displayed shortcut(s):** `S2P`  
**Menu location(s):** Lines &gt; Manage Polyline/Spline  
**Toolbar(s):** 05 Lines · Cadaster_Tools  
**Original English help:** Convert selected Splines to Polylines. Ability to configure point densification between Spline vertices.

#### `ID_SAA`
**English menu label:** On-Off survey point heights — SAA  
**Direct CAD command in menu/toolbar:** `SAA`  
**Displayed shortcut(s):** `SAA`  
**Menu location(s):** Topography &gt; Survey plan...step by step &gt; 2a. Manage survey points &gt; 2ac. On-Off other layers  
**Original English help:** No matching HELPSTRINGS description in this MNU. Refer to the menu label and original manual.

#### `ID_SAN`
**English menu label:** opening with numbering — SAN  
**Direct CAD command in menu/toolbar:** `san`, `SAN`  
**Displayed shortcut(s):** `SAN`  
**Menu location(s):** Floor plans &gt; Floor plan...step by step &gt; 6. Labels &gt; by typing  
**Toolbar(s):** Floor plan labels  
**Original English help:** Insert a label with automatic numbering for Open where you select on the screen or with calculations and operations width and precision.

#### `ID_SANP`
**English menu label:** opening with sill and numbering — SANP  
**Direct CAD command in menu/toolbar:** `sanp`, `SANP`  
**Displayed shortcut(s):** `SANP`  
**Menu location(s):** Floor plans &gt; Floor plan...step by step &gt; 6. Labels &gt; by typing  
**Toolbar(s):** Floor plan labels  
**Original English help:** Insert label with automatic numbering for opening with sill where you select on the screen or with calculations and operations width, sill and rack.

#### `ID_SANPS`
**English menu label:** opening with sill — SANPS  
**Direct CAD command in menu/toolbar:** `sanps`, `SANPS`  
**Displayed shortcut(s):** `SANPS`  
**Menu location(s):** Floor plans &gt; Floor plan...step by step &gt; 6. Labels &gt; by typing  
**Toolbar(s):** Floor plan labels  
**Original English help:** Insert label for opening with a sill where you select on the screen or with calculations and operations width, sill and lintel.

#### `ID_SANS`
**English menu label:** opening — SANS  
**Direct CAD command in menu/toolbar:** `sans`, `SANS`  
**Displayed shortcut(s):** `SANS`  
**Menu location(s):** Floor plans &gt; Floor plan...step by step &gt; 6. Labels &gt; by typing  
**Toolbar(s):** Floor plan labels  
**Original English help:** Insert an Open panel where you select on the screen or with calculations and operations width and precision.

#### `ID_SCC`
**English menu label:** On-Off point codes — SCC  
**Direct CAD command in menu/toolbar:** `SCC`  
**Displayed shortcut(s):** `SCC`  
**Menu location(s):** Topography &gt; Survey plan...step by step &gt; 2a. Manage survey points &gt; 2ac. On-Off other layers  
**Original English help:** No matching HELPSTRINGS description in this MNU. Refer to the menu label and original manual.

#### `ID_SCO`
**English menu label:** Change direction of Spline — SCO  
**Direct CAD command in menu/toolbar:** `SCO`  
**Displayed shortcut(s):** `SCO`  
**Menu location(s):** Lines &gt; Manage Polyline/Spline  
**Toolbar(s):** 05 Lines  
**Original English help:** Change the SPline direction. It is usually used in cases where commands related to the starting point of objects will then be executed.

#### `ID_SDD`
**English menu label:** 2ab. On-Off points layers — SDD · On-Off layers — SDD · On-off points — SDD  
**Direct CAD command in menu/toolbar:** `SDD`, `Sdd`  
**Displayed shortcut(s):** `SDD`  
**Menu location(s):** Topography &gt; Survey plan...step by step &gt; 2a. Manage survey points · Topography &gt; Survey plan...step by step &gt; 2a. Manage survey points &gt; 2ac. On-Off other layers · Sections-Elevation plans &gt; Section...step by step &gt; 2a. Insert floor plan - Vports - Lay on off · Sections-Elevation plans &gt; Elevation view...step by step &gt; 2a. Insert floor plan - Vports - Lay on off  
**Toolbar(s):** Modify 1 · Layer ONOFF · Floor plan xref  
**Original English help:** The command reads the layers registered in one of the SDD1-SDD5 command files and if they are open it closes them or if they are closed it opens them.

#### `ID_SDD1`
**English menu label:** On-Off layers list - 1 — SDD1 · On-off list - 1 — SDD1  
**Direct CAD command in menu/toolbar:** `SDD1`  
**Displayed shortcut(s):** `SDD1`  
**Menu location(s):** Topography &gt; Survey plan...step by step &gt; 2a. Manage survey points &gt; 2ac. On-Off other layers &gt; Command line · Layers &gt; On-Off &gt; Command line  
**Toolbar(s):** Layer ONOFF  
**Original English help:** Edit - 1 Define the layers that will open and close with the SDD command.

#### `ID_SDD2`
**English menu label:** On-Off layers list - 2 — SDD2 · On-off list - 2 — SDD2  
**Direct CAD command in menu/toolbar:** `SDD2`  
**Displayed shortcut(s):** `SDD2`  
**Menu location(s):** Topography &gt; Survey plan...step by step &gt; 2a. Manage survey points &gt; 2ac. On-Off other layers &gt; Command line · Layers &gt; On-Off &gt; Command line  
**Toolbar(s):** Layer ONOFF  
**Original English help:** Edit - 2 Define the layers that will open and close with the SDD command.

#### `ID_SDD3`
**English menu label:** On-Off layers list - 3 — SDD3 · On-off list - 3 — SDD3  
**Direct CAD command in menu/toolbar:** `SDD3`  
**Displayed shortcut(s):** `SDD3`  
**Menu location(s):** Topography &gt; Survey plan...step by step &gt; 2a. Manage survey points &gt; 2ac. On-Off other layers &gt; Command line · Layers &gt; On-Off &gt; Command line  
**Toolbar(s):** Layer ONOFF  
**Original English help:** Edit - 3 Define the layers that will open and close with the SDD command.

#### `ID_SDD4`
**English menu label:** On-Off layers list - 4 — SDD4 · On-off list - 4 — SDD4  
**Direct CAD command in menu/toolbar:** `SDD4`  
**Displayed shortcut(s):** `SDD4`  
**Menu location(s):** Topography &gt; Survey plan...step by step &gt; 2a. Manage survey points &gt; 2ac. On-Off other layers &gt; Command line · Layers &gt; On-Off &gt; Command line  
**Toolbar(s):** Layer ONOFF  
**Original English help:** Edit - 4 Define the layers that will open and close with the SDD command.

#### `ID_SDD5`
**English menu label:** On-Off layers list - 5 — SDD5 · On-off list - 5 — SDD5  
**Direct CAD command in menu/toolbar:** `SDD5`  
**Displayed shortcut(s):** `SDD5`  
**Menu location(s):** Topography &gt; Survey plan...step by step &gt; 2a. Manage survey points &gt; 2ac. On-Off other layers &gt; Command line · Layers &gt; On-Off &gt; Command line  
**Toolbar(s):** Layer ONOFF  
**Original English help:** Edit - 5 Define the layers that will open and close with the SDD command.

#### `ID_SDTOPO`
**English menu label:** ***Start sdbox***  
**Toolbar(s):** 00 Start sdbox  
**Original English help:** Enable or reload sdbox commands.

#### `ID_SPAR`
**English menu label:** Windows with numbering — SPAR  
**Direct CAD command in menu/toolbar:** `spar`, `SPAR`  
**Displayed shortcut(s):** `SPAR`  
**Menu location(s):** Floor plans &gt; Floor plan...step by step &gt; 6. Labels &gt; by typing  
**Toolbar(s):** Floor plan labels  
**Original English help:** Insert label with automatic numbering for Window and also width, sill and lintel that you define by calculations and operations .

#### `ID_SPARS`
**English menu label:** Windows — SPARS  
**Direct CAD command in menu/toolbar:** `spars`, `SPARS`  
**Displayed shortcut(s):** `SPARS`  
**Menu location(s):** Floor plans &gt; Floor plan...step by step &gt; 6. Labels &gt; by typing  
**Toolbar(s):** Floor plan labels  
**Original English help:** Insert label of window's width, sill and lintel that you provide bycalculations and operations.

#### `ID_SPART`
**English menu label:** Type - Window SPART  
**Direct CAD command in menu/toolbar:** `SPART`  
**Toolbar(s):** Doors and windows by type  
**Original English help:** No matching HELPSTRINGS description in this MNU. Refer to the menu label and original manual.

#### `ID_SPARTYP`
**English menu label:** Type - Window — SPART  
**Direct CAD command in menu/toolbar:** `spart`  
**Displayed shortcut(s):** `SPART`  
**Menu location(s):** Floor plans &gt; Floor plan...step by step &gt; 6. Labels &gt; by typing  
**Original English help:** Insert label with automatic numbering and type of Window and also width, sill and lintel that you provide by calculations and operations .

#### `ID_SPO`
**English menu label:** Doors with numbering — SPO  
**Direct CAD command in menu/toolbar:** `spo`, `SPO`  
**Displayed shortcut(s):** `SPO`  
**Menu location(s):** Floor plans &gt; Floor plan...step by step &gt; 6. Labels &gt; by typing  
**Toolbar(s):** Floor plan labels  
**Original English help:** Insert label with automatic numbering for door and also width and lintel that you provide by calculations and operations .

#### `ID_SPOS`
**English menu label:** Doors — SPOS  
**Direct CAD command in menu/toolbar:** `spos`, `SPOS`  
**Displayed shortcut(s):** `SPOS`  
**Menu location(s):** Floor plans &gt; Floor plan...step by step &gt; 6. Labels &gt; by typing  
**Toolbar(s):** Floor plan labels  
**Original English help:** Insert label for door inclding width and lintel that you provide by calculations and operations .

#### `ID_SPOT`
**English menu label:** Type - Door SPOT  
**Direct CAD command in menu/toolbar:** `SPOT`  
**Toolbar(s):** Doors and windows by type  
**Original English help:** No matching HELPSTRINGS description in this MNU. Refer to the menu label and original manual.

#### `ID_SPOTYP`
**English menu label:** Tyoe - Door — SPORT  
**Direct CAD command in menu/toolbar:** `sport`  
**Displayed shortcut(s):** `SPORT`  
**Menu location(s):** Floor plans &gt; Floor plan...step by step &gt; 6. Labels &gt; by typing  
**Original English help:** Insert label with automatic numbering and for door and also width and lintel that you provide by calculations and operations .

#### `ID_SSA`
**English menu label:** 7. Display elevations of main contours by crossection — SSA  
**Direct CAD command in menu/toolbar:** `SSA`  
**Displayed shortcut(s):** `SSA`  
**Menu location(s):** Topography &gt; Triangles - Contours - Volume &gt; Contours  
**Toolbar(s):** 16b Triangles contours  
**Original English help:** You select an imaginary straight line (with two points) on the screen and the altitudes are listed at the main contours that this imaginary line intersects.

#### `ID_SSAS`
**English menu label:** Display elevations of single contours SSAS  
**Direct CAD command in menu/toolbar:** `SSAS`  
**Toolbar(s):** 16b Triangles contours  
**Original English help:** You select points (individually or with an imaginary straight line) on any level and its altitude is automatically indicated.

#### `ID_SSV`
**English menu label:** On-off points — SSV  
**Direct CAD command in menu/toolbar:** `SSV`  
**Displayed shortcut(s):** `SSV`  
**Menu location(s):** Topography &gt; Triangles - Contours - Volume &gt; Triangles &gt; 8. Modify triangles  
**Toolbar(s):** 16b Triangles contours  
**Original English help:** Open and close the layers of points that are usually used to calculate triangles, for a view of the design with or without points.

#### `ID_SSYNS`
**English menu label:** Calculations with Splines — S+S  
**Direct CAD command in menu/toolbar:** `S+S`  
**Displayed shortcut(s):** `S+S`  
**Menu location(s):** Math operations and calculations &gt; Math Operations and Objects &gt; By type  
**Toolbar(s):** 02 Numbers  
**Original English help:** Operations with Spline type objects. The length of each Spline takes part. Your numbers or distances can also be included.

#### `ID_STT`
**English menu label:** Continue text below — STT  
**Direct CAD command in menu/toolbar:** `STT`  
**Displayed shortcut(s):** `STT`  
**Menu location(s):** Text &gt; Edit text  
**Toolbar(s):** 04 Texts  
**Original English help:** Add new text line under an existing one with the same attributes.

### MNU T {#mnu-t}

#### `ID_T2F`
**English menu label:** 22. Spelling check by Microsoft Word — T2F · Export text to file — T2F  
**Direct CAD command in menu/toolbar:** `T2F`  
**Displayed shortcut(s):** `T2F`  
**Menu location(s):** Topography &gt; Survey plan...step by step · Text &gt; Edit text  
**Toolbar(s):** 04 Texts · 16a Survey plan step by step  
**Original English help:** Export selected texts from drawing (Text, Mtext, ArcText) to a file of your choice.

#### `ID_T2FY`
**English menu label:** Export text b Y order T2FY  
**Direct CAD command in menu/toolbar:** `T2FY`  
**Toolbar(s):** 04 Texts  
**Original English help:** Export selected texts from drawing (Text, Mtext, ArcText) to a file of your choice, where all text with same Y-coordinate appear on the same row.

#### `ID_TCDS`
**English menu label:** Codes for title fields — TCDS  
**Direct CAD command in menu/toolbar:** `TCDS`  
**Displayed shortcut(s):** `TCDS`  
**Menu location(s):** Titles and legends &gt; T i t l e s &gt; Settings  
**Toolbar(s):** 18 Legends  
**Original English help:** In case you are designing a new Title design or modifying an existing one then you can add fields by copying the codes from the form that opens.

#### `ID_TITLOICHDIR`
**English menu label:** Change titles search path — TITLOICHDIR  
**Direct CAD command in menu/toolbar:** `TITLOICHDIR`  
**Displayed shortcut(s):** `TITLOICHDIR`  
**Menu location(s):** Titles and legends &gt; T i t l e s &gt; Settings  
**Toolbar(s):** 18 Legends  
**Original English help:** Specify the folder that contains the subfolders of the various Title categories that are part of the ZTITLOI command. The path con also be on local network.

#### `ID_TLAY`
**English menu label:** Insert sections layers — TLAY  
**Direct CAD command in menu/toolbar:** `tlay`, `TLAY`  
**Displayed shortcut(s):** `TLAY`  
**Menu location(s):** Sections-Elevation plans &gt; Section...step by step &gt; 1. SECTION layers  
**Toolbar(s):** 14a Section  step by step  
**Original English help:** The standard layers for section design are imported.

#### `ID_TLH`
**English menu label:** 1a. Interpretation of Section layers TLH  
**Direct CAD command in menu/toolbar:** `TLH`  
**Toolbar(s):** 14a Section  step by step  
**Original English help:** Opens the file with descriptions for a Section drawing's layers that are imported with the TLAY command.

#### `ID_TOPOUNITS`
**English menu label:** 1. Set survey units — TOPOUNITS  
**Direct CAD command in menu/toolbar:** `TOPOUNITS`  
**Displayed shortcut(s):** `TOPOUNITS`  
**Menu location(s):** Topography &gt; Survey plan...step by step  
**Toolbar(s):** 16a Survey plan step by step · 16 Topography  
**Original English help:** The units used in Topographic Plans are defined. Measures (decimal 4), Grad (decimal 4), angle measurement principle the Y axis and the angles are measured clockwise.

#### `ID_TS`
**English menu label:** Staircase section line — TS  
**Direct CAD command in menu/toolbar:** `ts`, `TS`  
**Displayed shortcut(s):** `TS`  
**Menu location(s):** Floor plans &gt; Floor plan...step by step &gt; 2. Staircases - Ramps  
**Toolbar(s):** Staircases and ramps · 15 Floor Plans  
**Original English help:** The line that ''cuts'' the ladder at the level of the floor plan is Result and instructions are given for the projection of it from below the ladder or the ladder to the top.

#### `ID_TST`
**English menu label:** 6. L e v e l s — TST  
**Direct CAD command in menu/toolbar:** `TST`  
**Displayed shortcut(s):** `TST`  
**Menu location(s):** Sections-Elevation plans &gt; Section...step by step  
**Toolbar(s):** 14 Sections_Elevations · 14a Section  step by step · 14b Elevation step by step  
**Original English help:** Enter a level symbol that indicates the Y of the point you select. You can configure decimals, units, addition, subtraction, multiplier, etc.

#### `ID_TSTGR`
**English menu label:** Aligned level marks — TSTGR  
**Direct CAD command in menu/toolbar:** `TSTGR`  
**Displayed shortcut(s):** `TSTGR`  
**Menu location(s):** Sections-Elevation plans &gt; Section...step by step &gt; 6a. Level tools · Sections-Elevation plans &gt; Elevation view...step by step &gt; 6a. Level tools  
**Toolbar(s):** 14 Sections_Elevations · 14a Section  step by step · 14b Elevation step by step  
**Original English help:** For each point you select the level is displayed at a predetermined position to the right or left of the drawing area. A dotted line is still being Result up to the point.

#### `ID_TSYNT`
**English menu label:** Calculations with Text — T+T  
**Direct CAD command in menu/toolbar:** `T+T`  
**Displayed shortcut(s):** `T+T`  
**Menu location(s):** Math operations and calculations &gt; Math Operations and Objects &gt; By type  
**Toolbar(s):** 02 Numbers  
**Original English help:** Operations with Text objects. Texts are included by their numerical value. Any other numbers or distances can also be included.

#### `ID_TT0`
**English menu label:** Delete empty texts — TT0  
**Direct CAD command in menu/toolbar:** `tt0`, `TT0`  
**Displayed shortcut(s):** `TT0`  
**Menu location(s):** Text &gt; Edit text  
**Toolbar(s):** 04 Texts  
**Original English help:** Delete objects like Text, Mtext, Arctext, Rtext without content. Text, Mtext, Rtext, and Arctext spaces are objects in the drawing that are not visible because their content has been removed.

#### `ID_TTB`
**English menu label:** Send triangles to back — TTB  
**Direct CAD command in menu/toolbar:** `TTB`  
**Displayed shortcut(s):** `TTB`  
**Menu location(s):** Topography &gt; Triangles - Contours - Volume &gt; Triangles &gt; 8. Modify triangles  
**Toolbar(s):** 16b Triangles contours  
**Original English help:** The triangles are moved behind other objects.

#### `ID_TTD`
**English menu label:** Delete triangle by centerpoint — TTD  
**Direct CAD command in menu/toolbar:** `TTD`  
**Displayed shortcut(s):** `TTD`  
**Menu location(s):** Topography &gt; Triangles - Contours - Volume &gt; Triangles &gt; 8. Modify triangles  
**Toolbar(s):** 16b Triangles contours  
**Original English help:** Select the center of the 3dface by picking a point and it is then deleted and removed from triangles database.

#### `ID_TTF`
**English menu label:** Bring triangles to front — TTF  
**Direct CAD command in menu/toolbar:** `TTF`  
**Displayed shortcut(s):** `TTF`  
**Menu location(s):** Topography &gt; Triangles - Contours - Volume &gt; Triangles &gt; 8. Modify triangles  
**Toolbar(s):** 16b Triangles contours  
**Original English help:** The triangles are projected in front of the other objects.

#### `ID_TTG`
**English menu label:** Show triangle centers — TTG  
**Direct CAD command in menu/toolbar:** `TTG`  
**Displayed shortcut(s):** `TTG`  
**Menu location(s):** Topography &gt; Triangles - Contours - Volume &gt; Triangles &gt; 8. Modify triangles  
**Toolbar(s):** 16b Triangles contours  
**Original English help:** The centers of the Triangles with small pink crosses appear temporarily.

#### `ID_TTGR`
**English menu label:** Refresh triangle centers — TTGR  
**Direct CAD command in menu/toolbar:** `TTGR`  
**Displayed shortcut(s):** `TTGR`  
**Menu location(s):** Topography &gt; Triangles - Contours - Volume &gt; Triangles &gt; 8. Modify triangles  
**Toolbar(s):** 16b Triangles contours  
**Original English help:** The centers of the Triangles are calculated and renewed with as many changes as you have made and the centers of the Triangles with small pink crosses are temporarily displayed.

#### `ID_TTH`
**English menu label:** Shade triangles — TTH  
**Direct CAD command in menu/toolbar:** `TTH`  
**Displayed shortcut(s):** `TTH`  
**Menu location(s):** Topography &gt; Triangles - Contours - Volume &gt; Triangles &gt; 8. Modify triangles  
**Toolbar(s):** 16b Triangles contours  
**Original English help:** The triangles are shaded depending on the slope they have: White = flat to Black = steep slope. You can also check for black areas (which means no triangles) with TTG command, where if a small pink cross does not appear in the center of the black triangle it means that it is not Result.

#### `ID_TTHR`
**English menu label:** Remove shading — TTHR  
**Direct CAD command in menu/toolbar:** `TTHR`  
**Displayed shortcut(s):** `TTHR`  
**Menu location(s):** Topography &gt; Triangles - Contours - Volume &gt; Triangles &gt; 8. Modify triangles  
**Toolbar(s):** 16b Triangles contours  
**Original English help:** The shading is removed from the Triangles.

#### `ID_TTKTR`
**English menu label:** Area documentation by Heron triangles — TTKTR  
**Direct CAD command in menu/toolbar:** `TTKTR`  
**Displayed shortcut(s):** `TTKTR`  
**Menu location(s):** Math operations and calculations &gt; Area &gt; Area measurment documentation  
**Toolbar(s):** 02 Numbers  
**Original English help:** No matching HELPSTRINGS description in this MNU. Refer to the menu label and original manual.

#### `ID_TTMT`
**English menu label:** Convert Text to Mtext — TTMT  
**Direct CAD command in menu/toolbar:** `TTMT`  
**Displayed shortcut(s):** `TTMT`  
**Menu location(s):** Text &gt; Edit text  
**Toolbar(s):** 04 Texts  
**Original English help:** Merge plain Text lines into one Mtext.

#### `ID_TTNO`
**English menu label:** 7. Highlight rejected triangles — TTNO · Rejected triangles — TTNO  
**Direct CAD command in menu/toolbar:** `TTNO`  
**Displayed shortcut(s):** `TTNO`  
**Menu location(s):** Topography &gt; Triangles - Contours - Volume &gt; Triangles · Math operations and calculations &gt; Area &gt; Area measurment documentation  
**Toolbar(s):** 02 Numbers · 16b Triangles contours  
**Original English help:** The sides of the closed area where no triangles were Result during the last use of the ZDTM command are displayed in yellow.

#### `ID_TTR`
**English menu label:** Permutation of 2 triangles — TTR  
**Direct CAD command in menu/toolbar:** `TTR`  
**Displayed shortcut(s):** `TTR`  
**Menu location(s):** Topography &gt; Triangles - Contours - Volume &gt; Triangles &gt; 8. Modify triangles  
**Toolbar(s):** 16b Triangles contours  
**Original English help:** Select the centers of two adjacent Triangles which are redesigned with a new diagonal between them.

#### `ID_TTS`
**English menu label:** 1. Add new points — TTS  
**Direct CAD command in menu/toolbar:** `TTS`  
**Displayed shortcut(s):** `TTS`  
**Menu location(s):** Topography &gt; Triangles - Contours - Volume &gt; Triangles  
**Toolbar(s):** 16b Triangles contours  
**Original English help:** Draw new points for the correct calculation of triangles (eg break-lines). G calculation tools are provided with the possibility of operations, selection of the same with another point, linear interpolation, etc.

#### `ID_TTT`
**English menu label:** Text editor — TTT  
**Direct CAD command in menu/toolbar:** `TTT`  
**Displayed shortcut(s):** `TTT`  
**Menu location(s):** Text &gt; Edit text  
**Toolbar(s):** 04 Texts  
**Original English help:** Edit text, mtext, arctext totally or individually. Convert chapters - small, add text right and left, translate utf8, find and replace, change height, Color, Style, layer ...

#### `ID_TTV`
**English menu label:** On-off Triangles — TTV  
**Direct CAD command in menu/toolbar:** `TTV`  
**Displayed shortcut(s):** `TTV`  
**Menu location(s):** Topography &gt; Triangles - Contours - Volume &gt; Triangles &gt; 8. Modify triangles  
**Toolbar(s):** 16b Triangles contours  
**Original English help:** Opens and closes the layers of triangles '' DTM_Triangles '' and '' DTM_Trig-No-Iso, for view of the design with or without triangles.

#### `ID_TTXX`
**Original English help:** You select text from xref wich is re-entered in the current drawing on the same X but at any level (Y) you define.

#### `ID_TTXXT`
**English menu label:** Texts from floor plan xref (areas, usage, etc) — TTXX  
**Direct CAD command in menu/toolbar:** `TTXX`  
**Displayed shortcut(s):** `TTXX`  
**Menu location(s):** Sections-Elevation plans &gt; Section...step by step &gt; 3a. Section Drawing Tools · Sections-Elevation plans &gt; Elevation view...step by step &gt; 3a. Elevation Drawing tools  
**Toolbar(s):** 14 Sections_Elevations · Tools for section and elevation plans  
**Original English help:** You select prases on texts from floor plan xref (space uses, ...) and this is re-written in the Section or Elevation drawing on the same X coordinate but at any level you define.

### MNU U {#mnu-u}

#### `ID_UNSDTOPO`
**English menu label:** Uninstall sdbox  
**Menu location(s):** Settings &gt; Uninstall SDBOX  
**Original English help:** Uninstall sdbox from Autocad. Autocad will close automatically.

#### `ID_UPDATE`
**English menu label:** Update SDBOX  
**Direct CAD command in menu/toolbar:** `zzUpdate`  
**Menu location(s):** Settings  
**Toolbar(s):** 19 Settings  
**Original English help:** Run this command to install the sdbox update.

### MNU V {#mnu-v}

#### `ID_VLV`
**English menu label:** Line with 2 arrows &lt;-----&gt; — VLV  
**Direct CAD command in menu/toolbar:** `VLV`  
**Displayed shortcut(s):** `VLV`  
**Menu location(s):** Lines &gt; Draw by typing command &gt; Lines with Arrows  
**Original English help:** Select 2 points and the final position for the 2 arrows. Result: Line at the 2 points and arrow block placed at each end.

#### `ID_VLVT`
**English menu label:** Dimension to check — VLV · Lengths to check — VLV · Lengths for check — VLV  
**Direct CAD command in menu/toolbar:** `VLVT`  
**Displayed shortcut(s):** `VLV`  
**Menu location(s):** Topography &gt; Survey plan...step by step &gt; [7. Annotations · Floor plans &gt; Floor plan...step by step &gt; 5. Annotations · Sections-Elevation plans &gt; Section...step by step &gt; 9a. Other annotations · Sections-Elevation plans &gt; Elevation view...step by step &gt; 10. Annotations  
**Toolbar(s):** Rest of annotations · Annotations · Topography annotations  
**Original English help:** A line is added with arrows (at start and end) that concerns a dimension for on-site control or a significant difference that must be resolved before delivery. They are printed in red on all pens. But their layer must be closed during the final printing.

#### `ID_VPV`
**English menu label:** Pline with 2 arrows — VPV  
**Direct CAD command in menu/toolbar:** `VPV`  
**Displayed shortcut(s):** `VPV`  
**Menu location(s):** Lines &gt; Draw by typing command &gt; Lines with Arrows  
**Original English help:** You select 2 points and a final position of the polyline with 2 arrows.

#### `ID_VV0`
**English menu label:** Rotation of vport — VV0  
**Direct CAD command in menu/toolbar:** `VV0`  
**Displayed shortcut(s):** `VV0`  
**Menu location(s):** Views &gt; Layout viewports  
**Toolbar(s):** 09 Views and Vports  
**Original English help:** The viewports in Layout you select are set to have the angle you set.

#### `ID_VV1`
**English menu label:** Pline with small arrow at the end — VV1  
**Direct CAD command in menu/toolbar:** `VV1`  
**Displayed shortcut(s):** `VV1`  
**Menu location(s):** Lines &gt; Draw by typing command &gt; Lines with Arrows  
**Original English help:** Pline with small Arrow at the end. Select the points where Polyline is Result and at the end a small arrow block is placed.

#### `ID_VV2`
**English menu label:** Pline with medium arrow at the end — VV2  
**Direct CAD command in menu/toolbar:** `VV2`  
**Displayed shortcut(s):** `VV2`  
**Menu location(s):** Lines &gt; Draw by typing command &gt; Lines with Arrows  
**Original English help:** Pline with middle arrow at the end. Select the points where Polyline is Result and at the end a middle arrow block is placed.

#### `ID_VV3`
**English menu label:** Pline with big arrow at the end — VV3  
**Direct CAD command in menu/toolbar:** `VV3`  
**Displayed shortcut(s):** `VV3`  
**Menu location(s):** Lines &gt; Draw by typing command &gt; Lines with Arrows  
**Original English help:** Pline with a big arrow at the end. Select the points where Polyline is Result and at the end a large arrow block is placed.

### MNU X {#mnu-x}

#### `ID_XARTI`
**English menu label:** Insert paper symbol A4 - A0 — XARTI · Paper size A4 - A0 — XARTI  
**Direct CAD command in menu/toolbar:** `xarti`, `XARTI`  
**Displayed shortcut(s):** `XARTI`  
**Menu location(s):** Topography &gt; Print tiles · Misc &gt; Insert paper  
**Toolbar(s):** 12 Misc · 18a Print_Tiles  
**Original English help:** Insert Paper block A4 to A0 depending on the print scale.

#### `ID_XDD`
**English menu label:** On-Off Xref layers — XDD · On-off points in Xref — XDD · On-off xref layers — XDD  
**Direct CAD command in menu/toolbar:** `XDD`  
**Displayed shortcut(s):** `XDD`  
**Menu location(s):** Topography &gt; Survey plan...step by step &gt; 2a. Manage survey points &gt; 2ac. On-Off other layers · Sections-Elevation plans &gt; Section...step by step &gt; 2a. Insert floor plan - Vports - Lay on off · Sections-Elevation plans &gt; Elevation view...step by step &gt; 2a. Insert floor plan - Vports - Lay on off · Layers &gt; On-Off  
**Toolbar(s):** Layer ONOFF · Floor plan xref  
**Original English help:** The command reads the layers registered in one of the SDD1-SDD5 files they are included in current Xref then they close if they are open or opens them if they are closed.

#### `ID_XDDA`
**English menu label:** Change Xref XDDA  
**Direct CAD command in menu/toolbar:** `XDDA`  
**Toolbar(s):** Layer ONOFF · 14 Sections_Elevations · Tools for section and elevation plans · Floor plan xref  
**Original English help:** Change Xref tat is used by commands such as TTXX.

#### `ID_XFCTL`
**English menu label:** Set xref shade — XFCTL  
**Direct CAD command in menu/toolbar:** `XFCTL`  
**Displayed shortcut(s):** `XFCTL`  
**Menu location(s):** Settings &gt; Various for Autocad  
**Toolbar(s):** 19 Settings  
**Original English help:** You set, with a number from 0 to 90, how dark the Xref you enter in the drawing will look. 0: Xref layers appear in their normal colors, 90: layer colors look very dark.

#### `ID_XKT`
**English menu label:** 4a. Floor count indication — XKT  
**Direct CAD command in menu/toolbar:** `XKT`  
**Displayed shortcut(s):** `XKT`  
**Menu location(s):** Topography &gt; Survey plan...step by step &gt; 4. Building  
**Toolbar(s):** Building hatch and floors ind. · 16 Topography  
**Original English help:** Adding floor count indication by selection from form.

#### `ID_XYZOUT`
**English menu label:** Model: Frame numbers — ZZB · Import and export labeled obects — ZZB  
**Direct CAD command in menu/toolbar:** `ZZB`, `XYZOUT`  
**Displayed shortcut(s):** `ZZB`  
**Menu location(s):** Topography &gt; Print tiles · Blocks (symbols) &gt; Insert Symbols &gt; Automated Numbering  
**Toolbar(s):** 03 Blocks · 18a Print_Tiles  
**Original English help:** Add block or text with simultaneous export to file and multiple naming capabilities on import and on-screen editing.

### MNU Y {#mnu-y}

#### `ID_YPPP`
**English menu label:** Insert doors-windows legend — YPPP · Insert doors-windows legend — YPP  
**Direct CAD command in menu/toolbar:** `YPPP`  
**Displayed shortcut(s):** `YPPP`, `YPP`  
**Menu location(s):** Floor plans &gt; Floor plan...step by step &gt; 6. Labels &gt; Legend of doors and windows by type · Titles and legends  
**Toolbar(s):** Doors and windows by type · 18 Legends  
**Original English help:** For the openings in which you have Result a panel with the SPARTYP or SPOTYP commands you can add a memo to the drawing with predefined descriptions for the type of openings.

#### `ID_YYTT`
**English menu label:** 13. Section title (bottom right) — YYTT · 14. ELevation name (bottom right) — YYTT · Notes and headings — YYTT  
**Direct CAD command in menu/toolbar:** `YYTT`  
**Displayed shortcut(s):** `YYTT`  
**Menu location(s):** Sections-Elevation plans &gt; Section...step by step · Sections-Elevation plans &gt; Elevation view...step by step · Text &gt; [Add text  
**Toolbar(s):** 14a Section  step by step · 14b Elevation step by step · 18 Legends  
**Original English help:** A form opens where you can select the text type (Notes, Small-Medium-Large Title, Small-Medium-Large Wide Title) to add in the drawing.

### MNU Z {#mnu-z}

#### `ID_Z2VPH`
**English menu label:** Split screen in 2 viewports (H) — ZV2H  
**Direct CAD command in menu/toolbar:** `Z2VPH`  
**Displayed shortcut(s):** `ZV2H`  
**Menu location(s):** Sections-Elevation plans &gt; Section...step by step &gt; 2a. Insert floor plan - Vports - Lay on off · Sections-Elevation plans &gt; Elevation view...step by step &gt; 2a. Insert floor plan - Vports - Lay on off · Views &gt; Split  
**Toolbar(s):** 09 Views and Vports · Floor plan xref  
**Original English help:** No matching HELPSTRINGS description in this MNU. Refer to the menu label and original manual.

#### `ID_Z2VPV`
**English menu label:** Split screen in 2 viewports (V) — ZV2V  
**Direct CAD command in menu/toolbar:** `Z2VPV`  
**Displayed shortcut(s):** `ZV2V`  
**Menu location(s):** Views &gt; Split  
**Toolbar(s):** 09 Views and Vports  
**Original English help:** No matching HELPSTRINGS description in this MNU. Refer to the menu label and original manual.

#### `ID_ZAA`
**English menu label:** 16a. Building surface — ZAA · Area by central point — ZAA  
**Direct CAD command in menu/toolbar:** `zaa`, `ZAA`  
**Displayed shortcut(s):** `ZAA`  
**Menu location(s):** Topography &gt; Survey plan...step by step &gt; 16. Building's area, dims and vertices · Math operations and calculations &gt; Area  
**Toolbar(s):** 02 Numbers · Building documentation  
**Original English help:** Calculate area of closed boundary by giving a center point and you can add its value to the drawing. You can set units, decimal places, prefix, and suffix of the result.

#### `ID_ZAAS`
**English menu label:** Area by corner points — ZAAS  
**Direct CAD command in menu/toolbar:** `zaas`, `ZAAS`  
**Displayed shortcut(s):** `ZAAS`  
**Menu location(s):** Math operations and calculations &gt; Area  
**Toolbar(s):** 02 Numbers  
**Original English help:** Calculate area by points and you can add its value to the Drawing. You can set the units, decimal places, prefix, and suffix of the result.

#### `ID_ZACADPLTST`
**English menu label:** Paste here  
**Direct CAD command in menu/toolbar:** `ZACADPLTST`  
**Menu location(s):** Settings &gt; PlotStyles  
**Toolbar(s):** 19 Settings  
**Original English help:** The folder containing the * .ctb files of Autocad will open. You can paste copied * .ctb print files into it.

#### `ID_ZBBXM`
**English menu label:** Set all block parts to layer 0 — ZBBXM  
**Direct CAD command in menu/toolbar:** `ZBBXM`  
**Displayed shortcut(s):** `ZBBXM`  
**Menu location(s):** Blocks (symbols) &gt; Edit  
**Toolbar(s):** 03 Blocks  
**Original English help:** All parts of selected blocks parts are moved to layer 0 and with color and linetype set to byblock. If original blocks contain other blocks those get exploded and moved as well. You can filter objects with ZZSA command.

#### `ID_ZBLIST`
**English menu label:** Plot block list ZBLIST  
**Direct CAD command in menu/toolbar:** `ZBLIST`  
**Toolbar(s):** Block legend  
**Original English help:** A file opens that contains a list with the block names of the Drawing.

#### `ID_ZBLK`
**English menu label:** Counting blocks and xrefs — ZBLK  
**Direct CAD command in menu/toolbar:** `ZBLK`  
**Displayed shortcut(s):** `ZBLK`  
**Menu location(s):** Blocks (symbols) &gt; Edit  
**Toolbar(s):** 03 Blocks  
**Original English help:** Opens a file that includes all blocks and xrefs in the drawing by counting them.

#### `ID_ZBLS`
**English menu label:** Detailed block List ZBLS  
**Direct CAD command in menu/toolbar:** `ZBLS`  
**Toolbar(s):** Block legend  
**Original English help:** Open a file of your choice that contains a Detailed List (Name, layer, Color, Scale, etc.) of the blocks you select.

#### `ID_ZBOR`
**English menu label:** Insert north sign — ZBOR · Add north sign — ZBOR · 5a. Add north sign or arrow — ZBOR · Add north sign or arrow — ZBOR  
**Direct CAD command in menu/toolbar:** `zbor`, `ZBOR`  
**Displayed shortcut(s):** `ZBOR`  
**Menu location(s):** Topography &gt; Survey plan...step by step &gt; 11. Grid · Topography &gt; Survey plan...step by step &gt; 19. Image excerpts &gt; Step by step · Topography &gt; Print tiles · Floor plans &gt; Floor plan...step by step · Blocks (symbols) &gt; Insert Symbols &gt; North sign and arrows  
**Toolbar(s):** bl North sign and arrows · Grid -System details · Excerpts · 18a Print_Tiles  
**Original English help:** Insert north sign or arrow as block with a sizerelative to print scale and by selecting it from a library.

#### `ID_ZBOR1`
**English menu label:** Symbols description — ZBOR1  
**Direct CAD command in menu/toolbar:** `ZBOR1`  
**Displayed shortcut(s):** `ZBOR1`  
**Menu location(s):** Blocks (symbols) &gt; Insert Symbols &gt; North sign and arrows  
**Toolbar(s):** bl North sign and arrows  
**Original English help:** Opens the file that contains the descriptions of the north signs and arrows that are added by ZBOR command.

#### `ID_ZBORDIR`
**English menu label:** Open folder — ZBORDIR  
**Direct CAD command in menu/toolbar:** `ZBORDIR`  
**Displayed shortcut(s):** `ZBORDIR`  
**Menu location(s):** Blocks (symbols) &gt; Insert Symbols &gt; North sign and arrows  
**Toolbar(s):** bl North sign and arrows  
**Original English help:** Open the folder with north signs and arrows. You can modify existing or add new blocks.

#### `ID_ZBORLIST`
**English menu label:** List of north signs and arrows symbols — ZBORLIST  
**Direct CAD command in menu/toolbar:** `ZBORLIST`  
**Displayed shortcut(s):** `ZBORLIST`  
**Menu location(s):** Blocks (symbols) &gt; Insert Symbols &gt; North sign and arrows  
**Toolbar(s):** bl North sign and arrows  
**Original English help:** Open file that contains a list with the names of the north signs and arrows that appear on the ZBOR command form. You can copy this list to the description file for modification.

#### `ID_ZCC`
**English menu label:** Copy — ZCC  
**Direct CAD command in menu/toolbar:** `zcc`, `ZCC`  
**Displayed shortcut(s):** `ZCC`  
**Menu location(s):** Modify &gt; Modify-Change &gt; Copy-Move-Erase  
**Toolbar(s):** 13 Modify  
**Original English help:** Repeatable copy of selected objects through filters.

#### `ID_ZCCIM`
**English menu label:** Copy images to folder — ZCCIM  
**Direct CAD command in menu/toolbar:** `ZCCIM`  
**Displayed shortcut(s):** `ZCCIM`  
**Menu location(s):** Images  
**Toolbar(s):** 13a Images  
**Original English help:** The images you select on screen are copied as files to an address of your choice.

#### `ID_ZCCPH`
**English menu label:** Copy drawing's photos — ZCCPH  
**Direct CAD command in menu/toolbar:** `ZCCPH`  
**Displayed shortcut(s):** `ZCCPH`  
**Menu location(s):** Photos  
**Toolbar(s):** 17 Photos  
**Original English help:** You select the labels (numbers) indicating photos in the drawing and those photos are automatically copied to an address of your choice. Search path for machin labels is the folder you specify by ZDFFC command.

#### `ID_ZCCXR`
**English menu label:** Copy Xref to folder — ZCCXR  
**Direct CAD command in menu/toolbar:** `ZCCXR`  
**Displayed shortcut(s):** `ZCCXR`  
**Menu location(s):** Blocks (symbols) &gt; Manage Xref  
**Toolbar(s):** bl_Xref  
**Original English help:** For any xrefs you select their original files are copied to a location of your choice. (Note: The command also works local network.)

#### `ID_ZCDIM`
**English menu label:** Spot dimensions with not true value — ZCDIM  
**Direct CAD command in menu/toolbar:** `ZCDIM`  
**Displayed shortcut(s):** `ZCDIM`  
**Menu location(s):** Dimensions &gt; Dimensions Autocad type  
**Toolbar(s):** 11 Dimensions  
**Original English help:** Red circles are added as result in those of the selected dimensions that do not have a true value but an edited one.

#### `ID_ZCGRST`
**English menu label:** Change Country/Zone — ZCGRST  
**Direct CAD command in menu/toolbar:** `ZCGRST`  
**Displayed shortcut(s):** `ZCGRST`  
**Menu location(s):** Topography &gt; Coordinates &gt; Tranfomations · Misc &gt; Google Earth  
**Toolbar(s):** 12 Misc  
**Original English help:** The selected Country is no longer valid. In any command that requires the Coordinate System to be specified you will be able to reselect Country and/or Zone.

#### `ID_ZCH`
**English menu label:** Change — ZCH  
**Direct CAD command in menu/toolbar:** `ZCH`  
**Displayed shortcut(s):** `ZCH`  
**Menu location(s):** Modify &gt; Modify-Change &gt; Change  
**Toolbar(s):** 13 Modify  
**Original English help:** Select objects through filters to which changes for Elevation, Color, Layer, Ltype, Ltscale, Ltweight, Thickness will be applied.

#### `ID_ZCHHS`
**English menu label:** Hatch Scale — ZCHHS  
**Direct CAD command in menu/toolbar:** `zchhs`, `ZCHHS`  
**Displayed shortcut(s):** `ZCHHS`  
**Menu location(s):** Modify &gt; Modify-Change &gt; Change &gt; Change by factor  
**Toolbar(s):** 13 Modify  
**Original English help:** Each of the hatches you select gets a new scale which is the result of multiplying the scale they had before by your own number.

#### `ID_ZCHL`
**English menu label:** LtScale — ZCHL  
**Direct CAD command in menu/toolbar:** `zchl`, `ZCHL`  
**Displayed shortcut(s):** `ZCHL`  
**Menu location(s):** Modify &gt; Modify-Change &gt; Change &gt; Change by factor  
**Toolbar(s):** 13 Modify  
**Original English help:** Each of the items you select gets a new ltscale which is the result of multiplying the ltscale they had before by your own number.

#### `ID_ZCHW`
**English menu label:** LtWeight — ZCHW  
**Direct CAD command in menu/toolbar:** `zchw`, `ZCHW`  
**Displayed shortcut(s):** `ZCHW`  
**Menu location(s):** Modify &gt; Modify-Change &gt; Change &gt; Change by factor  
**Toolbar(s):** 13 Modify  
**Original English help:** Each of the items you select gets a new Ltweight which is the result of multiplying the Ltweight they had before by your own number.

#### `ID_ZCIMD`
**English menu label:** Change images paths/path — ZCIMD  
**Direct CAD command in menu/toolbar:** `ZCIMD`  
**Displayed shortcut(s):** `ZCIMD`  
**Menu location(s):** Images  
**Toolbar(s):** 13a Images  
**Original English help:** You select a new search address and for all the Images you select in the drawing and if they exist in the new address, they will be read from there. For those who are not in the new address, no change is made.

#### `ID_ZCONVERTPSTYLES`
**English menu label:** CTB (plot styles)  
**Direct CAD command in menu/toolbar:** `CONVERTPSTYLES`  
**Menu location(s):** Settings &gt; Various for Autocad  
**Toolbar(s):** 19 Settings  
**Original English help:** If .CTB pens do not appear in your design, then type CONVERTPSTYLES, press OK and they will appear.

#### `ID_ZCR`
**English menu label:** Rotate from base point — ZCR  
**Direct CAD command in menu/toolbar:** `zcr`, `ZCR`  
**Displayed shortcut(s):** `ZCR`  
**Menu location(s):** Modify &gt; Modify-Change &gt; Scale-Rotate-Z  
**Toolbar(s):** 13 Modify  
**Original English help:** Rotate objects around their base point.

#### `ID_ZCRTD`
**English menu label:** Change search path of Rtext — ZCRTD  
**Direct CAD command in menu/toolbar:** `ZCRTD`  
**Displayed shortcut(s):** `ZCRTD`  
**Menu location(s):** Text &gt; Edit text  
**Toolbar(s):** 04 Texts  
**Original English help:** You choose a new search address and for the Rtexts (which read a file) you select in the drawing and they exist in the new address, they will be read from there on. For those who are not in the new address, no change is made.

#### `ID_ZCS`
**English menu label:** 2aa. Resize points — ZCS · Scale from base point — ZCS  
**Direct CAD command in menu/toolbar:** `zcs`, `ZCS`  
**Displayed shortcut(s):** `ZCS`  
**Menu location(s):** Topography &gt; Survey plan...step by step &gt; 2a. Manage survey points · Modify &gt; Modify-Change &gt; Scale-Rotate-Z  
**Toolbar(s):** 13 Modify · 16a Survey plan step by step  
**Original English help:** Scale objects from their point of insertion.

#### `ID_ZCT`
**English menu label:** Cut line part — ZCT  
**Direct CAD command in menu/toolbar:** `ZCT`  
**Displayed shortcut(s):** `ZCT`  
**Menu location(s):** Lines  
**Toolbar(s):** 05 Lines  
**Original English help:** Select a cutting point on Line, Polyline, Arc etc. and then the side to be removed.

#### `ID_ZCXRD`
**English menu label:** Change Xref search Adress/path — ZCXRD  
**Direct CAD command in menu/toolbar:** `ZCXRD`  
**Displayed shortcut(s):** `ZCXRD`  
**Menu location(s):** Blocks (symbols) &gt; Manage Xref  
**Toolbar(s):** bl_Xref  
**Original English help:** If you want to change the Xref search paths in the drawing, you point it through a Windows window. (Note: Do not select a specific drawing, only the address.)

#### `ID_ZDA`
**English menu label:** 13bd. Street and alley widths — ZDA · Exterior dimensions (Aligned) — ZDA · Normal Inter.-Exter. — ZDA  
**Direct CAD command in menu/toolbar:** `zda`, `ZDA`  
**Displayed shortcut(s):** `ZDA`  
**Menu location(s):** Topography &gt; Survey plan...step by step &gt; 13b. Urban planning annotations · Floor plans &gt; Floor plan...step by step &gt; 7. Dimensions · Dimensions &gt; Dimensions Autocad type &gt; by typing &gt; z-DimAligned  
**Toolbar(s):** 11 Dimensions · Dimensions · Urban planning annotations  
**Original English help:** Dimensioning (Aligned type of normal height of letters) with options: 1. Repeated Dimensioning 2. Selection of Objects 3. Continuous Dimensioning.

#### `ID_ZDAM`
**English menu label:** 16c. Building distances — ZDAM · Interior dimensions (Aligned) — ZDAM · Small — ZDAM  
**Direct CAD command in menu/toolbar:** `zdam`, `ZDAM`  
**Displayed shortcut(s):** `ZDAM`  
**Menu location(s):** Topography &gt; Survey plan...step by step &gt; 16. Building's area, dims and vertices · Floor plans &gt; Floor plan...step by step &gt; 7. Dimensions · Dimensions &gt; Dimensions Autocad type &gt; by typing &gt; z-DimAligned  
**Toolbar(s):** 11 Dimensions · Dimensions · Building documentation  
**Original English help:** Dimensioning (Aligned type of lower letter height) with options: 1. Repeated Dimensioning 2. Selection of Objects 3. Continuous Dimensioning.

#### `ID_ZDARC`
**English menu label:** Arc length — ZDARC  
**Direct CAD command in menu/toolbar:** `ZDARC`  
**Displayed shortcut(s):** `ZDARC`  
**Menu location(s):** Dimensions &gt; Dimensions Autocad type &gt; by typing &gt; Circles and Arcs  
**Toolbar(s):** 11 Dimensions  
**Original English help:** Indication of dimension with the length of the selected arc.

#### `ID_ZDASHELP`
**English menu label:** Forest map legend  
**Menu location(s):** Topography &gt; Forest areas  
**Toolbar(s):** 21 FOREST  
**Original English help:** No matching HELPSTRINGS description in this MNU. Refer to the menu label and original manual.

#### `ID_ZDCS`
**English menu label:** Center of selected  
**Direct CAD command in menu/toolbar:** `ZDCS`  
**Menu location(s):** Dimensions &gt; Dimensions Autocad type &gt; by typing &gt; Circles and Arcs  
**Toolbar(s):** 11 Dimensions  
**Original English help:** Center mark of selected arcs or circles.

#### `ID_ZDD`
**English menu label:** zzDistance — ZDD  
**Direct CAD command in menu/toolbar:** `ZDD`  
**Displayed shortcut(s):** `ZDD`  
**Menu location(s):** Topography · Dimensions  
**Toolbar(s):** 11 Dimensions  
**Original English help:** Repeated distances. Each of the distances is listed on the Command Line. You can also enter block codes.

#### `ID_ZDD2`
**English menu label:** Distances between 2 objects — ZDD2  
**Direct CAD command in menu/toolbar:** `ZDD2`  
**Displayed shortcut(s):** `ZDD2`  
**Menu location(s):** Topography &gt; Survey plan...step by step &gt; 13a. Lines study tools · Dimensions &gt; Dimensions Autocad type &gt; by typing &gt; z-DimAligned  
**Toolbar(s):** 11 Dimensions · Tools  
**Original English help:** Select 2 items on the screen and then draw the dimensions between them at predefined distances.

#### `ID_ZDDAS`
**English menu label:** Select dimensio type — ZDDAS · Select dimension — ZDDAS  
**Direct CAD command in menu/toolbar:** `ZDDAS`, `zddas`  
**Displayed shortcut(s):** `ZDDAS`  
**Menu location(s):** Floor plans &gt; Floor plan...step by step &gt; 7. Dimensions · Dimensions &gt; Dimensions Autocad type  
**Toolbar(s):** 11 Dimensions · Dimensions  
**Original English help:** Selection of Autocad Dimension type with possibilities of configuration of decimals, units, size, coefficients, etc.

#### `ID_ZDDAT`
**English menu label:** Select command — ZDDAT  
**Direct CAD command in menu/toolbar:** `zddat`, `ZDDAT`  
**Displayed shortcut(s):** `ZDDAT`  
**Menu location(s):** Dimensions &gt; Dimensions simple Text  
**Toolbar(s):** 11 Dimensions  
**Original English help:** Select Simple Text Dimension type with the ability to configure decimals, units, sizes, coefficients, etc.

#### `ID_ZDDG`
**English menu label:** On sections by imaginery line — ZDDG  
**Direct CAD command in menu/toolbar:** `ZDDG`  
**Displayed shortcut(s):** `ZDDG`  
**Menu location(s):** Dimensions &gt; Dimensions Autocad type &gt; by typing &gt; z-DimAligned  
**Toolbar(s):** 11 Dimensions  
**Original English help:** Automate dimensions between objects intersected by an imaginary line of your choice.

#### `ID_ZDDIAM`
**English menu label:** Diameter — ZDDIAM  
**Direct CAD command in menu/toolbar:** `ZDDIAM`  
**Displayed shortcut(s):** `ZDDIAM`  
**Menu location(s):** Dimensions &gt; Dimensions Autocad type &gt; by typing &gt; Circles and Arcs  
**Toolbar(s):** 11 Dimensions  
**Original English help:** Indication of selected arc or circle diameter.

#### `ID_ZDDIAMS`
**English menu label:** Diameter of selected — ZDDIAMS  
**Direct CAD command in menu/toolbar:** `ZDDIAMS`  
**Displayed shortcut(s):** `ZDDIAMS`  
**Menu location(s):** Dimensions &gt; Dimensions Autocad type &gt; by typing &gt; Circles and Arcs  
**Toolbar(s):** 11 Dimensions  
**Original English help:** Indication of diameters of selected arcs or circles.

#### `ID_ZDDXX`
**English menu label:** Forest map features — ZDDXX  
**Direct CAD command in menu/toolbar:** `ZDDXX`  
**Displayed shortcut(s):** `ZDDXX`  
**Menu location(s):** Topography &gt; Forest areas  
**Toolbar(s):** 21 FOREST  
**Original English help:** No matching HELPSTRINGS description in this MNU. Refer to the menu label and original manual.

#### `ID_ZDEXASF`
**English menu label:** Witnessing dimensions — ZDEXASF  
**Direct CAD command in menu/toolbar:** `ZDEXASF`  
**Displayed shortcut(s):** `ZDEXASF`  
**Menu location(s):** Topography &gt; Witnessing points · Dimensions &gt; Dimensions simple Text &gt; by typing  
**Toolbar(s):** 11 Dimensions · Witnessing points  
**Original English help:** Indication of distances for collateral. In the 2nd point of each dimension a code is written and at the end you can add a table of distances.

#### `ID_ZDFA`
**English menu label:** Set actual image size — ZDFA · Modify by one distance — ZDFA  
**Direct CAD command in menu/toolbar:** `zdfa`, `ZDFA`  
**Displayed shortcut(s):** `ZDFA`  
**Menu location(s):** Topography &gt; Survey plan...step by step &gt; 12. Insert and adjust images · Images &gt; Modify images · Modify &gt; Settings  
**Toolbar(s):** 13 Modify · Insert and adjust images  
**Original English help:** SCALE object at its actual size based on one length and it's true value. You measure or enter a distance and give its real value and then accordingly selected objects increase or decrease.

#### `ID_ZDFFC`
**English menu label:** Open photos folder — ZDFFC  
**Direct CAD command in menu/toolbar:** `ZDFFC`  
**Displayed shortcut(s):** `ZDFFC`  
**Menu location(s):** Photos &gt; Open photos  
**Toolbar(s):** 17 Photos  
**Original English help:** Opens (via Windows) the folder you have selected for "open photos"

#### `ID_ZDFP`
**English menu label:** Automated excerpt creation — ZDFP · Automatic map extract — ZDFP · Create image excerpt — ZDFP  
**Direct CAD command in menu/toolbar:** `ZDFP`  
**Displayed shortcut(s):** `ZDFP`  
**Menu location(s):** Topography &gt; Survey plan...step by step &gt; 19. Image excerpts · Topography &gt; Print tiles · Images  
**Toolbar(s):** 13a Images · Excerpts · 18a Print_Tiles  
**Original English help:** Automatically create a snippet image: Select the images and other objects to be displayed in the snippet, select the print scale, north position and title, and create a snippet in the '' YPOMNHMA '' Layer.

#### `ID_ZDFS`
**English menu label:** Adjust image to print as excerpt — ZDFS · Different printing scales — ZDFS  
**Direct CAD command in menu/toolbar:** `zdfs`, `ZDFS`  
**Displayed shortcut(s):** `ZDFS`  
**Menu location(s):** Topography &gt; Survey plan...step by step &gt; 19. Image excerpts &gt; Step by step · Images &gt; Modify images · Modify &gt; Settings  
**Toolbar(s):** 13 Modify · Excerpts  
**Original English help:** SCALE objects with options of different Print Scales or conversion based on real and design dimensions.

#### `ID_ZDGT`
**English menu label:** Dimensioning by points — ZDGT  
**Direct CAD command in menu/toolbar:** `ZDGT`  
**Displayed shortcut(s):** `ZDGT`  
**Menu location(s):** Dimensions &gt; Dimensions simple Text &gt; by typing  
**Toolbar(s):** 11 Dimensions  
**Original English help:** Dimensions (plain Text) with points selected by the user

#### `ID_ZDGTF`
**English menu label:** Dims by points and factor — ZDGTF  
**Direct CAD command in menu/toolbar:** `ZDGTF`  
**Displayed shortcut(s):** `ZDGTF`  
**Menu location(s):** Dimensions &gt; Dimensions simple Text &gt; by typing  
**Toolbar(s):** 11 Dimensions  
**Original English help:** Dimensions (plain Text) with points selected by the user and suggested multiplier each time.

#### `ID_ZDIAN`
**English menu label:** Area distribution — ZDIAN · Distribution — ZDIAN  
**Direct CAD command in menu/toolbar:** `ZDIAN`  
**Displayed shortcut(s):** `ZDIAN`  
**Menu location(s):** Topography &gt; Survey plan...step by step &gt; 15. Property's area documentation · Math operations and calculations &gt; Area  
**Toolbar(s):** 02 Numbers · Property area documentation  
**Original English help:** No matching HELPSTRINGS description in this MNU. Refer to the menu label and original manual.

#### `ID_ZDIMLIST`
**English menu label:** Dimension types of the drawing — ZDIMLIST  
**Direct CAD command in menu/toolbar:** `zdimlist`  
**Displayed shortcut(s):** `ZDIMLIST`  
**Menu location(s):** Dimensions  
**Original English help:** The dimension types of the drawing with their name and factor (DIMSCALE) are exported to a file

#### `ID_ZDL`
**English menu label:** Exterior dimensions (Linear) — ZDL · 8. Dimensions (total height) — ZDL · Normal Inter.-Exter. — ZDL  
**Direct CAD command in menu/toolbar:** `ZDL`, `zdl`  
**Displayed shortcut(s):** `ZDL`  
**Menu location(s):** Floor plans &gt; Floor plan...step by step &gt; 7. Dimensions · Sections-Elevation plans &gt; Section...step by step · Sections-Elevation plans &gt; Elevation view...step by step · Dimensions &gt; Dimensions Autocad type &gt; by typing &gt; z-DimLinear  
**Toolbar(s):** 11 Dimensions · 14a Section  step by step · 14b Elevation step by step · Dimensions  
**Original English help:** Dimensioning (Linear type of normal height of letters) with options: 1. Repeated Dimensioning 2. Selection of Objects 3. Continuous Dimensioning.

#### `ID_ZDLAYT`
**English menu label:** Dimensioning by layer — ZDLAYT  
**Direct CAD command in menu/toolbar:** `ZDLAYT`  
**Displayed shortcut(s):** `ZDLAYT`  
**Menu location(s):** Dimensions &gt; Dimensions simple Text &gt; by typing  
**Toolbar(s):** 11 Dimensions  
**Original English help:** Dimensions (plain Text) of all objects in the same layer

#### `ID_ZDLM`
**English menu label:** Interior dimensions (Linear) — ZDLM · 7. Dimensions (vertical) — ZDLM · Small — ZDLM  
**Direct CAD command in menu/toolbar:** `ZDLM`, `zdlm`  
**Displayed shortcut(s):** `ZDLM`  
**Menu location(s):** Floor plans &gt; Floor plan...step by step &gt; 7. Dimensions · Sections-Elevation plans &gt; Section...step by step · Dimensions &gt; Dimensions Autocad type &gt; by typing &gt; z-DimLinear  
**Toolbar(s):** 11 Dimensions · 14a Section  step by step · Dimensions  
**Original English help:** Dimensioning (Linear type of lower letter height) with options: 1. Repeated Dimensioning 2. Selection of Objects 3. Continuous Dimensioning.

#### `ID_ZDOV`
**English menu label:** Dimensions of securement measures (Circle - Arrow) — ZDOV  
**Direct CAD command in menu/toolbar:** `ZDOV`  
**Displayed shortcut(s):** `ZDOV`  
**Menu location(s):** Dimensions &gt; Dimensions Autocad type &gt; by typing &gt; z-DimAligned  
**Toolbar(s):** 11 Dimensions  
**Original English help:** Dimensions where at one end they have a circle and at the other an arrow.

#### `ID_ZDPRP`
**English menu label:** Previous rotation — ZDPRP  
**Direct CAD command in menu/toolbar:** `ZDPRP`  
**Displayed shortcut(s):** `ZDPRP`  
**Menu location(s):** Views &gt; Rotate Screen  
**Toolbar(s):** 09 Views and Vports  
**Original English help:** Previous screen rotation as defined with the last use of the ZDPRR command.

#### `ID_ZDPRR`
**English menu label:** Rotate screen in Model — ZDPRR  
**Direct CAD command in menu/toolbar:** `ZDPRR`  
**Displayed shortcut(s):** `ZDPRR`  
**Menu location(s):** Views &gt; Rotate Screen  
**Toolbar(s):** 09 Views and Vports  
**Original English help:** You select two points on the screen whose angle becomes the horizontal axis of the screen. Recommended for printing or for drawing with "Ortho" in oblique direction.

#### `ID_ZDRAD`
**English menu label:** Radius — ZDRAD  
**Direct CAD command in menu/toolbar:** `ZDRAD`  
**Displayed shortcut(s):** `ZDRAD`  
**Menu location(s):** Dimensions &gt; Dimensions Autocad type &gt; by typing &gt; Circles and Arcs  
**Toolbar(s):** 11 Dimensions  
**Original English help:** Indication of the radius of a selected arc or circle.

#### `ID_ZDRADS`
**English menu label:** Radius of selected — ZDRADS  
**Direct CAD command in menu/toolbar:** `ZDRADS`  
**Displayed shortcut(s):** `ZDRADS`  
**Menu location(s):** Dimensions &gt; Dimensions Autocad type &gt; by typing &gt; Circles and Arcs  
**Toolbar(s):** 11 Dimensions  
**Original English help:** Indication of radii of selected arcs or circles.

#### `ID_ZDRC`
**English menu label:** Open drawing folder — ZDRC  
**Direct CAD command in menu/toolbar:** `ZDRC`  
**Displayed shortcut(s):** `ZDRC`  
**Menu location(s):** Misc &gt; Files  
**Toolbar(s):** 12 Misc  
**Original English help:** Opens (via Windows) the folder in which the current drawing is located.

#### `ID_ZDRW`
**English menu label:** Undo rotation — ZDRW  
**Direct CAD command in menu/toolbar:** `ZDRW`  
**Displayed shortcut(s):** `ZDRW`  
**Menu location(s):** Views &gt; Rotate Screen  
**Toolbar(s):** 09 Views and Vports  
**Original English help:** The drawing screen returnsto WCS.

#### `ID_ZDST`
**English menu label:** Dimensioning selected — ZDST  
**Direct CAD command in menu/toolbar:** `ZDST`  
**Displayed shortcut(s):** `ZDST`  
**Menu location(s):** Dimensions &gt; Dimensions simple Text &gt; by typing  
**Toolbar(s):** 11 Dimensions  
**Original English help:** Automatic dimensioning (plain text) of all objects selected.

#### `ID_ZDT1`
**English menu label:** 3. Set triangles as regulrar — ZDT1  
**Direct CAD command in menu/toolbar:** `ZDT1`  
**Displayed shortcut(s):** `ZDT1`  
**Menu location(s):** Topography &gt; Triangles - Contours - Volume &gt; Triangles  
**Toolbar(s):** 16b Triangles contours  
**Original English help:** The commands will draw triangles for drawing heights. These triangles are 3DFACES and "fit" in the "DTM_Triangles" layer.

#### `ID_ZDT2`
**English menu label:** 3. Set triangles as exception — ZDT2  
**Direct CAD command in menu/toolbar:** `ZDT2`  
**Displayed shortcut(s):** `ZDT2`  
**Menu location(s):** Topography &gt; Triangles - Contours - Volume &gt; Triangles  
**Toolbar(s):** 16b Triangles contours  
**Original English help:** The commands will add exception triangles for no contours, but will participate in the cross sections (such as areas with concrete or asphalt). These triangles are 3DFASES and "enter" the layer "DTM_Trig-No-Iso".

#### `ID_ZDTE`
**English menu label:** Cross section on contours — ZDTE  
**Direct CAD command in menu/toolbar:** `ZDTE`  
**Displayed shortcut(s):** `ZDTE`  
**Menu location(s):** Topography &gt; Triangles - Contours - Volume &gt; Cross section and longitudinal section  
**Toolbar(s):** 16b Triangles contours  
**Original English help:** You select two points for the straight section and then the cross section is automatically Result.

#### `ID_ZDTEMULT`
**English menu label:** Multiple cross sections on contours — ZDTEMULT  
**Direct CAD command in menu/toolbar:** `ZDTEMULT`  
**Displayed shortcut(s):** `ZDTEMULT`  
**Menu location(s):** Topography &gt; Triangles - Contours - Volume &gt; Cross section and longitudinal section  
**Toolbar(s):** 16b Triangles contours  
**Original English help:** You select existing lines and the cross-sections are automatically Result for each one.

#### `ID_ZDTM`
**English menu label:** 7. Closed polygons trianguulation — ZDTM  
**Direct CAD command in menu/toolbar:** `ZDTM`  
**Displayed shortcut(s):** `ZDTM`  
**Menu location(s):** Topography &gt; Triangles - Contours - Volume &gt; Triangles  
**Toolbar(s):** 16b Triangles contours  
**Original English help:** You select a point in the center of the closed area (or you choose a closed polyline) and the triangles within the closed area are automatically Result. You can have all the design layers open because only the points are automatically selected. You can then set the break-lines in this area with the ZDTMB command.

#### `ID_ZDTMA`
**English menu label:** 4. Free triangulation — ZDTMA  
**Direct CAD command in menu/toolbar:** `ZDTMA`  
**Displayed shortcut(s):** `ZDTMA`  
**Menu location(s):** Topography &gt; Triangles - Contours - Volume &gt; Triangles  
**Toolbar(s):** 16b Triangles contours  
**Original English help:** You can freely select an area on the screen and automatically draw triangles. You can have all the design layers open because only the points are automatically selected. You can then set the break-lines with the ZDTMB command.

#### `ID_ZDTMB`
**English menu label:** 6. Recalculation by break-lines — ZDTMB  
**Direct CAD command in menu/toolbar:** `ZDTMB`  
**Displayed shortcut(s):** `ZDTMB`  
**Menu location(s):** Topography &gt; Triangles - Contours - Volume &gt; Triangles  
**Toolbar(s):** 16b Triangles contours  
**Original English help:** You select Lines, Polylines and Splines that are slope change lines and then the triangles that are close to these lines are automatically reResult. There need to be points at each vertex of these lines.

#### `ID_ZDTMD`
**English menu label:** 6a. Remove triangles by pline selection — ZDTMD  
**Direct CAD command in menu/toolbar:** `ZDTMD`  
**Displayed shortcut(s):** `ZDTMD`  
**Menu location(s):** Topography &gt; Triangles - Contours - Volume &gt; Triangles  
**Toolbar(s):** 16b Triangles contours  
**Original English help:** This command will delete the triangles whose centers are contained in the polylines you choose (eg buildings, terraces, concrete areas, paving ..). It is recommended, before using the command, to isolate (ZF) the layers that you do not want to have in them triangles (eg KT, BR, Anabathmoi, Asfaltos etc.) and convert them to Polyline with the PLL command.

#### `ID_ZDTMDEP`
**English menu label:** Create Solid by choosing depth — ZDTMDEP  
**Direct CAD command in menu/toolbar:** `ZDTMDEP`  
**Displayed shortcut(s):** `ZDTMDEP`  
**Menu location(s):** Topography &gt; Triangles - Contours - Volume &gt; Surface and Solid  
**Toolbar(s):** 16c Calculating volume  
**Original English help:** No matching HELPSTRINGS description in this MNU. Refer to the menu label and original manual.

#### `ID_ZDTMDPE`
**Original English help:** Automatic creation of solid from the triangles you select on the screen and the depth you give by a number. Once Solid is created you can calculate the area and volume with AutoCAD AA and MASSPROP commands.

#### `ID_ZDTMISO`
**English menu label:** 4. Draw final contours — ZDTMISO  
**Direct CAD command in menu/toolbar:** `ZDTMISO`  
**Displayed shortcut(s):** `ZDTMISO`  
**Menu location(s):** Topography &gt; Triangles - Contours - Volume &gt; Contours  
**Toolbar(s):** 16b Triangles contours  
**Original English help:** The contours are designed with the parameters you have defined in the temporary contour drawing commands or by selecting new triangles.

#### `ID_ZDTMSTART`
**English menu label:** 2. Select points for DTM — ZDTS  
**Direct CAD command in menu/toolbar:** `ZDTS`  
**Displayed shortcut(s):** `ZDTS`  
**Menu location(s):** Topography &gt; Triangles - Contours - Volume &gt; Triangles  
**Toolbar(s):** 16b Triangles contours  
**Original English help:** Select the points in the area where triangulation will then be performed and specify which attribute of the blocks contains the altitude information.

#### `ID_ZDTMSURF`
**English menu label:** Create surface by triangles — ZDTMSURF  
**Direct CAD command in menu/toolbar:** `ZDTMSURF`  
**Displayed shortcut(s):** `ZDTMSURF`  
**Menu location(s):** Topography &gt; Triangles - Contours - Volume &gt; Surface and Solid  
**Toolbar(s):** 16c Calculating volume  
**Original English help:** Automatic creation of surface from triangles you select on the screen.

#### `ID_ZDTMV1`
**English menu label:** Calculate volume by surfaces — ZDTMV1  
**Direct CAD command in menu/toolbar:** `ZDTMV1`  
**Displayed shortcut(s):** `ZDTMV1`  
**Menu location(s):** Topography &gt; Triangles - Contours - Volume &gt; Excavation-Embankment Volume &gt; For older cad versions  
**Original English help:** Older sdbox command for automatically designing and analyzing solid excavations using surfaces. All you need to choose in the design are triangles-Up and triangles-Down.

#### `ID_ZDTMV2`
**English menu label:** Calculate volume by solids — ZDTMV2  
**Direct CAD command in menu/toolbar:** `ZDTMV2`  
**Displayed shortcut(s):** `ZDTMV2`  
**Menu location(s):** Topography &gt; Triangles - Contours - Volume &gt; Excavation-Embankment Volume &gt; For older cad versions  
**Original English help:** Older sdbox command for automated design and analysis of solid excavations using Solids. All you need to choose in the design are Triangles-Up and Triangles-Down.

#### `ID_ZDTMVOL`
**English menu label:** 4. Create and analyze excavation-embankment volumes — ZDTMVOL  
**Direct CAD command in menu/toolbar:** `ZDTMVOL`  
**Displayed shortcut(s):** `ZDTMVOL`  
**Menu location(s):** Topography &gt; Triangles - Contours - Volume &gt; Excavation-Embankment Volume  
**Toolbar(s):** 16c Calculating volume  
**Original English help:** Automatic design and analysis of solid excavations and earthworks. All you need to choose in the design are triangles before excavation and after.

#### `ID_ZDTR`
**English menu label:** Divide area into triangles — ZDTR  
**Direct CAD command in menu/toolbar:** `ZDTR`  
**Displayed shortcut(s):** `ZDTR`  
**Menu location(s):** Math operations and calculations &gt; Area &gt; Area measurment documentation  
**Toolbar(s):** 02 Numbers  
**Original English help:** No matching HELPSTRINGS description in this MNU. Refer to the menu label and original manual.

#### `ID_ZDTSET`
**English menu label:** Text properties — ZDTSET  
**Direct CAD command in menu/toolbar:** `ZDTSET`  
**Displayed shortcut(s):** `ZDTSET`  
**Menu location(s):** Math operations and calculations &gt; Area &gt; Area measurment documentation  
**Toolbar(s):** 02 Numbers  
**Original English help:** No matching HELPSTRINGS description in this MNU. Refer to the menu label and original manual.

#### `ID_ZDTT`
**English menu label:** Rectangle by sides and direction — ZDTT  
**Direct CAD command in menu/toolbar:** `zdtt`, `ZDTT`  
**Displayed shortcut(s):** `ZDTT`  
**Menu location(s):** Topography &gt; Survey plan...step by step &gt; 3a. Drawing Tools · Floor plans &gt; Floor plan...step by step &gt; 2a. Drawing tools · Sections-Elevation plans &gt; Section...step by step &gt; 3a. Section Drawing Tools · Sections-Elevation plans &gt; Elevation view...step by step &gt; 3a. Elevation Drawing tools · Lines  
**Toolbar(s):** 05 Lines · Drawing tools  
**Original English help:** Draw a rectangle in any direction by typing even just the sides.

#### `ID_ZDTX`
**English menu label:** Add distances and hights — ZDTX  
**Direct CAD command in menu/toolbar:** `ZDTX`  
**Displayed shortcut(s):** `ZDTX`  
**Menu location(s):** Topography &gt; Triangles - Contours - Volume &gt; Cross section and longitudinal section  
**Original English help:** No matching HELPSTRINGS description in this MNU. Refer to the menu label and original manual.

#### `ID_ZDW`
**English menu label:** Angle by 3 points — ZDW  
**Direct CAD command in menu/toolbar:** `zdw`, `ZDW`  
**Displayed shortcut(s):** `ZDW`  
**Menu location(s):** Dimensions &gt; Dimensions Autocad type &gt; by typing &gt; Angles  
**Toolbar(s):** 11 Dimensions  
**Original English help:** Select the center of the corner and then its 2 ends. Then you choose to design the interior or the complementary corner.

#### `ID_ZDWA`
**English menu label:** Azimuth by 2 points — ZDWA  
**Direct CAD command in menu/toolbar:** `zdwa`, `ZDWA`  
**Displayed shortcut(s):** `ZDWA`  
**Menu location(s):** Dimensions &gt; Dimensions Autocad type &gt; by typing &gt; Angles  
**Toolbar(s):** 11 Dimensions  
**Original English help:** You choose 2 points between which the Azimuth is planned.

#### `ID_ZDWS`
**English menu label:** Angle of selected — ZDWS  
**Direct CAD command in menu/toolbar:** `zdws`, `ZDWS`  
**Displayed shortcut(s):** `ZDWS`  
**Menu location(s):** Dimensions &gt; Dimensions Autocad type &gt; by typing &gt; Angles  
**Toolbar(s):** 11 Dimensions  
**Original English help:** You select objects and draw the angle between them.

#### `ID_ZDXYGE`
**English menu label:** Set Dx and Dy — ZDXYGE  
**Direct CAD command in menu/toolbar:** `ZDXYGE`  
**Displayed shortcut(s):** `ZDXYGE`  
**Menu location(s):** Misc &gt; Google Earth  
**Toolbar(s):** 12 Misc  
**Original English help:** No matching HELPSTRINGS description in this MNU. Refer to the menu label and original manual.

#### `ID_ZEDGEMODE`
**English menu label:** Trim-Extend back to normal  
**Menu location(s):** Settings &gt; Various for Autocad  
**Original English help:** No matching HELPSTRINGS description in this MNU. Refer to the menu label and original manual.

#### `ID_ZEE`
**English menu label:** Erase — ZEE  
**Direct CAD command in menu/toolbar:** `zee`, `ZEE`  
**Displayed shortcut(s):** `ZEE`  
**Menu location(s):** Modify &gt; Modify-Change &gt; Copy-Move-Erase  
**Toolbar(s):** 13 Modify  
**Original English help:** Remove objects from the drawing by selecting them through filters.

#### `ID_ZENLLCK`
**English menu label:** Inform me about locked layers — ZENLLCK  
**Direct CAD command in menu/toolbar:** `ZENLLCK`  
**Displayed shortcut(s):** `ZENLLCK`  
**Menu location(s):** Layers  
**Toolbar(s):** 06 Layers  
**Original English help:** When you select items that are in a locked layer, the sdbox commands are executed normally (the layers are temporarily unlocked) and with this command you set whether you will be informed or not.

#### `ID_ZEX`
**English menu label:** Extend to point — ZEX  
**Direct CAD command in menu/toolbar:** `ZEX`  
**Displayed shortcut(s):** `ZEX`  
**Menu location(s):** Lines  
**Toolbar(s):** 05 Lines  
**Original English help:** Select any point on the screen (not necessarily on an object) and up to this point the desired Lines, Polylines, Arcs etc. are extended.

#### `ID_ZF`
**English menu label:** Freeze layers — ZF · Freeze all except selected — ZF  
**Direct CAD command in menu/toolbar:** `ZF`, `Zf`  
**Displayed shortcut(s):** `ZF`  
**Menu location(s):** Topography &gt; Survey plan...step by step &gt; 13a. Lines study tools · Layers &gt; Edit layers  
**Toolbar(s):** Modify 1 · 06 Layers · Tools  
**Original English help:** Select through filters or on the screen the layers that will remain thawed while all the rest become freezed.

#### `ID_ZFF`
**English menu label:** Unfreeze all — ZFF  
**Direct CAD command in menu/toolbar:** `ZFF`, `Zff`  
**Displayed shortcut(s):** `ZFF`  
**Menu location(s):** Topography &gt; Survey plan...step by step &gt; 13a. Lines study tools · Layers &gt; Edit layers  
**Toolbar(s):** Modify 1 · 06 Layers · Tools  
**Original English help:** All layers that are freezed return to thaw mode.

#### `ID_ZFG`
**English menu label:** Grey except selected — ZFG  
**Direct CAD command in menu/toolbar:** `ZFG`  
**Displayed shortcut(s):** `ZFG`  
**Menu location(s):** Topography &gt; Survey plan...step by step &gt; 13a. Lines study tools · Layers &gt; Edit layers  
**Toolbar(s):** 06 Layers · Tools  
**Original English help:** You select through filters or on the screen the layers that will remain in their colors while all the others are displayed in dark gray 251.

#### `ID_ZFGG`
**English menu label:** Back to original colors — ZFGG  
**Direct CAD command in menu/toolbar:** `ZFGG`  
**Displayed shortcut(s):** `ZFGG`  
**Menu location(s):** Topography &gt; Survey plan...step by step &gt; 13a. Lines study tools · Layers &gt; Edit layers  
**Toolbar(s):** 06 Layers · Tools  
**Original English help:** All layers return to the colors they had before executing the ZFG command.

#### `ID_ZFIM`
**English menu label:** Show-hide selected Images — ZFIM  
**Direct CAD command in menu/toolbar:** `ZFIM`  
**Displayed shortcut(s):** `ZFIM`  
**Menu location(s):** Images  
**Toolbar(s):** 13a Images  
**Original English help:** When the drawing has a large number of images then with this command you isolate or reappear some Images to lighten up the drawing.

#### `ID_ZFXR`
**English menu label:** Hide - Show Xref — ZFXR  
**Direct CAD command in menu/toolbar:** `ZFXR`  
**Displayed shortcut(s):** `ZFXR`  
**Menu location(s):** Blocks (symbols) &gt; Manage Xref  
**Toolbar(s):** bl_Xref  
**Original English help:** Unload and Reload Xref by selecting them on the drawing screen.

#### `ID_ZGRLIST`
**English menu label:** Plot lines list ZGRLIST  
**Direct CAD command in menu/toolbar:** `ZGRLIST`  
**Toolbar(s):** Lines legend  
**Original English help:** Open file containing list of linetypes contained in the drawing.

#### `ID_ZGRLS`
**English menu label:** Plot lines List ZGRLS  
**Direct CAD command in menu/toolbar:** `ZGRLS`  
**Toolbar(s):** Lines legend  
**Original English help:** Open a file of your choice that contains a detailed List (Name, layer, Color, Scale, etc.) of the Lines (Linetypes) that you select.

#### `ID_ZHELPXGE`
**English menu label:** Help  
**Menu location(s):** Misc &gt; Google Earth  
**Toolbar(s):** 12 Misc  
**Original English help:** No matching HELPSTRINGS description in this MNU. Refer to the menu label and original manual.

#### `ID_ZHH`
**English menu label:** Select other hatch — ZHH · Select other Hatch — ZHH · 11c. Select other HATCH — ZHH · Select and draw HATCH — ZHH  
**Direct CAD command in menu/toolbar:** `zhh`, `ZHH`  
**Displayed shortcut(s):** `ZHH`  
**Menu location(s):** Topography &gt; Survey plan...step by step &gt; 5. Hatch for ground · Floor plans &gt; Floor plan...step by step &gt; 9. Floor plan hatch · Sections-Elevation plans &gt; Section...step by step &gt; 10a. Hatch the rest · Sections-Elevation plans &gt; Elevation view...step by step · Hatch  
**Toolbar(s):** 07 Hatch · 14a Section  step by step · 14b Elevation step by step · 15a Floor plan step by step · Ground and area hatch  
**Original English help:** Add Hatch to the drawing with selection from form.

#### `ID_ZHHDAS`
**English menu label:** Forest types hatch — ZHHDAS  
**Direct CAD command in menu/toolbar:** `ZHHDAS`  
**Displayed shortcut(s):** `ZHHDAS`  
**Menu location(s):** Topography &gt; Forest areas  
**Toolbar(s):** 21 FOREST  
**Original English help:** No matching HELPSTRINGS description in this MNU. Refer to the menu label and original manual.

#### `ID_ZHHLIST`
**English menu label:** Show hatch list ZHHLIST  
**Direct CAD command in menu/toolbar:** `ZHHLIST`  
**Toolbar(s):** Hatch legend  
**Original English help:** Open file containing List of Hatch names contained in the drawing.

#### `ID_ZHHLS`
**English menu label:** Detailed hatch List ZHHLS  
**Direct CAD command in menu/toolbar:** `ZHHLS`  
**Toolbar(s):** Hatch legend  
**Original English help:** Open a file of your choice that contains a detailed List (Name, Layer, Color, Scale, etc.) of the hatches you select.

#### `ID_ZID`
**English menu label:** Vertices, sides and area by point or pline — ZID  
**Direct CAD command in menu/toolbar:** `ZID`  
**Displayed shortcut(s):** `ZID`  
**Menu location(s):** Topography &gt; Survey plan...step by step &gt; 15. Property's area documentation  
**Toolbar(s):** Property area documentation  
**Original English help:** You select a point inside a closed area or you select a polyline for which a label-mark is inserted on each vertex, sides and area are displayed as text. Also a table of the vertices coordinates can be added.

#### `ID_ZIDS`
**English menu label:** Vertices, sides and area by consecutive points — ZIDS  
**Direct CAD command in menu/toolbar:** `ZIDS`  
**Displayed shortcut(s):** `ZIDS`  
**Menu location(s):** Topography &gt; Survey plan...step by step &gt; 15. Property's area documentation  
**Toolbar(s):** Property area documentation  
**Original English help:** Select surface points for which a label-mark is inserted on each vertex, sides and area are displayed as text. Also a table of the vertices coordinates can be added.

#### `ID_ZIK`
**English menu label:** Building vertices by center point — ZIK  
**Direct CAD command in menu/toolbar:** `ZIK`  
**Displayed shortcut(s):** `ZIK`  
**Menu location(s):** Topography &gt; Survey plan...step by step &gt; 16. Building's area, dims and vertices &gt; 16b. Building vertices  
**Toolbar(s):** Building documentation · Export coordinates  
**Original English help:** You choose an interior point of a closed area or select a polyline of the building where label-marks are inserted on each vertex.

#### `ID_ZIKS`
**English menu label:** Building vertices by points — ZIKS  
**Direct CAD command in menu/toolbar:** `ZIKS`  
**Displayed shortcut(s):** `ZIKS`  
**Menu location(s):** Topography &gt; Survey plan...step by step &gt; 16. Building's area, dims and vertices &gt; 16b. Building vertices  
**Toolbar(s):** Building documentation  
**Original English help:** You select the building surface points where label-marks are inserted on each vertex.

#### `ID_ZIMAA`
**English menu label:** Locating property on the excerpt — ZIMAA · Transfer frames to extract — ZIMAA · Transfer objects between images — ZIMAA  
**Direct CAD command in menu/toolbar:** `ZIMAA`  
**Displayed shortcut(s):** `ZIMAA`  
**Menu location(s):** Topography &gt; Survey plan...step by step &gt; 19. Image excerpts &gt; Step by step · Topography &gt; Print tiles · Images &gt; Modify images  
**Toolbar(s):** 13a Images · Excerpts · 18a Print_Tiles  
**Original English help:** You select the initial and final image and the objects to be transferred or copied based on the difference in position, size and rotation of the final with the original.

#### `ID_ZIMDD`
**English menu label:** Image adjustment by side sizes — ZIMDD · Adjust by side sizes — ZIMDD  
**Direct CAD command in menu/toolbar:** `ZIMDD`  
**Displayed shortcut(s):** `ZIMDD`  
**Menu location(s):** Topography &gt; Survey plan...step by step &gt; 12. Insert and adjust images · Images &gt; Modify images · Modify &gt; Settings  
**Toolbar(s):** 13 Modify · 13a Images · Insert and adjust images  
**Original English help:** MOVE-ROTATE-SCALE objects with average calculation from a contnuous path that you specify on the screen and the actual value of each part.

#### `ID_ZIMDETACH`
**English menu label:** Detach selected images — ZIMDETACH  
**Direct CAD command in menu/toolbar:** `ZIMDETACH`  
**Displayed shortcut(s):** `ZIMDETACH`  
**Menu location(s):** Images  
**Original English help:** No matching HELPSTRINGS description in this MNU. Refer to the menu label and original manual.

#### `ID_ZIMGEO`
**English menu label:** Insert georeferenced image — ZIMGEO  
**Direct CAD command in menu/toolbar:** `ZIMGEO`  
**Displayed shortcut(s):** `ZIMGEO`  
**Menu location(s):** Images &gt; Insert images  
**Toolbar(s):** 13a Images · Insert and adjust images  
**Original English help:** You select the image to insert in the drawing and a geo-reference file with the same name is automatically being searched. If found, the image is georeferenced when inserted. (Geo-reference files: t2w, tfw, tifw, tiw, j2w, jpgw, bmw, b2w, giw, g2w, wld)

#### `ID_ZIMGS`
**English menu label:** Georeference image on screen — ZIMGS  
**Direct CAD command in menu/toolbar:** `ZIMGS`  
**Displayed shortcut(s):** `ZIMGS`  
**Menu location(s):** Images &gt; Insert images  
**Toolbar(s):** 13a Images  
**Original English help:** You select the image on the screen and a geo-reference file with the same name is automatically searched. If found, the image changes position, rotation and scale according to the archive. (Geo-reference files: t2w, tfw, tifw, tiw, j2w, jpgw, bmw, b2w, giw, g2w, wld)

#### `ID_ZIMIN`
**English menu label:** Insert image — ZIMIN · Insert Images — ZIMIN  
**Direct CAD command in menu/toolbar:** `ZIMIN`  
**Displayed shortcut(s):** `ZIMIN`  
**Menu location(s):** Topography &gt; Survey plan...step by step &gt; 12. Insert and adjust images · Images &gt; Insert images  
**Toolbar(s):** 13a Images · Insert and adjust images  
**Original English help:** Select an image to insert and a layer by the name ''tiff_p_(image-name)'' is automatically generated.

#### `ID_ZIMNM`
**English menu label:** Images names display — ZIMNM  
**Direct CAD command in menu/toolbar:** `ZIMNM`  
**Displayed shortcut(s):** `ZIMNM`  
**Menu location(s):** Images &gt; Modify images  
**Toolbar(s):** 13a Images  
**Original English help:** The name is automatically displayed on the screen for as many images as you select. The text (image file name) is displayed in the upper left corner of the image (in the image layer).

#### `ID_ZIMPH`
**English menu label:** Automatic numbering — ZIMPH  
**Direct CAD command in menu/toolbar:** `ZIMPH`  
**Displayed shortcut(s):** `ZIMPH`  
**Menu location(s):** Photos &gt; 0. Insert Photos  
**Toolbar(s):** 17 Photos  
**Original English help:** Insert an image that concerns a photo which is prepared for printing by automatic size and title.

#### `ID_ZIMPHN`
**English menu label:** Automatic photo names — ZIMPHN  
**Direct CAD command in menu/toolbar:** `ZIMPHN`  
**Displayed shortcut(s):** `ZIMPHN`  
**Menu location(s):** Photos &gt; 0. Insert Photos  
**Toolbar(s):** 17 Photos  
**Original English help:** No matching HELPSTRINGS description in this MNU. Refer to the menu label and original manual.

#### `ID_ZIMPHT`
**English menu label:** Custom names — ZIMPHT  
**Direct CAD command in menu/toolbar:** `ZIMPHT`  
**Displayed shortcut(s):** `ZIMPHT`  
**Menu location(s):** Photos &gt; 0. Insert Photos  
**Toolbar(s):** 17 Photos  
**Original English help:** No matching HELPSTRINGS description in this MNU. Refer to the menu label and original manual.

#### `ID_ZIMRELOAD`
**English menu label:** Reload — ZIMRELOAD  
**Direct CAD command in menu/toolbar:** `ZIMRELOAD`  
**Displayed shortcut(s):** `ZIMRELOAD`  
**Menu location(s):** Images  
**Original English help:** No matching HELPSTRINGS description in this MNU. Refer to the menu label and original manual.

#### `ID_ZIMUNLOAD`
**English menu label:** Unload — ZIMUNLOAD  
**Direct CAD command in menu/toolbar:** `ZIMUNLOAD`  
**Displayed shortcut(s):** `ZIMUNLOAD`  
**Menu location(s):** Images  
**Original English help:** No matching HELPSTRINGS description in this MNU. Refer to the menu label and original manual.

#### `ID_ZINSXREF`
**English menu label:** Insert Floor plan Xref — ZINSXREF  
**Direct CAD command in menu/toolbar:** `ZINSXREF`  
**Displayed shortcut(s):** `ZINSXREF`  
**Menu location(s):** Sections-Elevation plans &gt; Section...step by step &gt; 2a. Insert floor plan - Vports - Lay on off · Sections-Elevation plans &gt; Elevation view...step by step &gt; 2a. Insert floor plan - Vports - Lay on off  
**Toolbar(s):** Floor plan xref  
**Original English help:** No matching HELPSTRINGS description in this MNU. Refer to the menu label and original manual.

#### `ID_ZKKFIL`
**English menu label:** Add layer filters — ZKKFIL  
**Direct CAD command in menu/toolbar:** `ZKKFIL`  
**Displayed shortcut(s):** `ZKKFIL`  
**Menu location(s):** Floor plans &gt; Floor plan...step by step &gt; 1. Floor plan Layers  
**Toolbar(s):** 15a Floor plan step by step  
**Original English help:** No matching HELPSTRINGS description in this MNU. Refer to the menu label and original manual.

#### `ID_ZKKP`
**English menu label:** Select label command — ZKKP  
**Direct CAD command in menu/toolbar:** `zkkp`, `ZKKP`  
**Displayed shortcut(s):** `ZKKP`  
**Menu location(s):** Floor plans &gt; Floor plan...step by step &gt; 6. Labels  
**Toolbar(s):** Floor plan labels  
**Original English help:** A form opens where you can select the opening type for the panel to be inserted into the drawing with its details. You can configure decimals, coefficients, size, etc.

#### `ID_ZKMX`
**English menu label:** Average polyline — ZKMX · Average POlyline — ZKMX  
**Direct CAD command in menu/toolbar:** `ZKMX`  
**Displayed shortcut(s):** `ZKMX`  
**Menu location(s):** Topography &gt; Survey plan...step by step &gt; 13a. Lines study tools · Lines  
**Toolbar(s):** 05 Lines · Tools  
**Original English help:** Axial polyline design in the middle of two objects you select.

#### `ID_ZKYK`
**English menu label:** 13bb. City block symbols — ZKYK · Insert circled indicator — ZKYK  
**Direct CAD command in menu/toolbar:** `zkyk`, `ZKYK`  
**Displayed shortcut(s):** `ZKYK`  
**Menu location(s):** Topography &gt; Survey plan...step by step &gt; 13b. Urban planning annotations · Floor plans &gt; Floor plan...step by step &gt; 5. Annotations &gt; Indicators in circles · Sections-Elevation plans &gt; Section...step by step &gt; 9a. Other annotations &gt; Indicators in circles · Sections-Elevation plans &gt; Elevation view...step by step &gt; 10. Annotations &gt; Indicators in circles · Blocks (symbols) &gt; Insert Symbols &gt; Elements inside a circle  
**Toolbar(s):** bl Circled indicators · Urban planning annotations  
**Original English help:** Insert block (data in a circle) with size relative to print scale and library selection. In the library you can also define descriptions for each block.

#### `ID_ZKYK1`
**English menu label:** Descriptions of indicators — ZKYK1  
**Direct CAD command in menu/toolbar:** `ZKYK1`  
**Displayed shortcut(s):** `ZKYK1`  
**Menu location(s):** Floor plans &gt; Floor plan...step by step &gt; 5. Annotations &gt; Indicators in circles · Sections-Elevation plans &gt; Section...step by step &gt; 9a. Other annotations &gt; Indicators in circles · Sections-Elevation plans &gt; Elevation view...step by step &gt; 10. Annotations &gt; Indicators in circles · Blocks (symbols) &gt; Insert Symbols &gt; Elements inside a circle  
**Toolbar(s):** bl Circled indicators  
**Original English help:** Open the file containing the blocks that appear on the ZKYK command tab. You can modify the descriptions.

#### `ID_ZKYKDIR`
**English menu label:** Open folder — ZKYKDIR  
**Direct CAD command in menu/toolbar:** `ZKYKDIR`  
**Displayed shortcut(s):** `ZKYKDIR`  
**Menu location(s):** Floor plans &gt; Floor plan...step by step &gt; 5. Annotations &gt; Indicators in circles · Sections-Elevation plans &gt; Section...step by step &gt; 9a. Other annotations &gt; Indicators in circles · Sections-Elevation plans &gt; Elevation view...step by step &gt; 10. Annotations &gt; Indicators in circles · Blocks (symbols) &gt; Insert Symbols &gt; Elements inside a circle  
**Toolbar(s):** bl Circled indicators  
**Original English help:** Open folder of circled indicators. You can modify existing or add new blocks.

#### `ID_ZKYKLIST`
**English menu label:** List of indicators — ZKYKLIST  
**Direct CAD command in menu/toolbar:** `ZKYKLIST`  
**Displayed shortcut(s):** `ZKYKLIST`  
**Menu location(s):** Floor plans &gt; Floor plan...step by step &gt; 5. Annotations &gt; Indicators in circles · Sections-Elevation plans &gt; Section...step by step &gt; 9a. Other annotations &gt; Indicators in circles · Sections-Elevation plans &gt; Elevation view...step by step &gt; 10. Annotations &gt; Indicators in circles · Blocks (symbols) &gt; Insert Symbols &gt; Elements inside a circle  
**Toolbar(s):** bl Circled indicators  
**Original English help:** A file opens that contains a list with the block names in a circle that appear on the ZKYK command tab. You can copy this list to the description file for modification.

#### `ID_ZLAY2NORM`
**English menu label:** Colors for printing — ZLAY2NORM  
**Direct CAD command in menu/toolbar:** `ZLAY2NORM`  
**Displayed shortcut(s):** `ZLAY2NORM`  
**Menu location(s):** Floor plans &gt; Floor plan...step by step &gt; 1. Floor plan Layers · Sections-Elevation plans &gt; Section...step by step &gt; 1. SECTION layers · Sections-Elevation plans &gt; Elevation view...step by step &gt; 1. Layers  
**Toolbar(s):** 14a Section  step by step · 14b Elevation step by step · 15a Floor plan step by step  
**Original English help:** Colors for Plan, Elevation or Section printing are set.

#### `ID_ZLAY2PC`
**English menu label:** Set colors and weights for Pcloud image — ZLAY2PC · Color and weight for pcloud image — ZLAY2PC  
**Direct CAD command in menu/toolbar:** `ZLAY2PC`  
**Displayed shortcut(s):** `ZLAY2PC`  
**Menu location(s):** Floor plans &gt; Floor plan...step by step &gt; 1. Floor plan Layers · Sections-Elevation plans &gt; Section...step by step &gt; 1. SECTION layers · Sections-Elevation plans &gt; Elevation view...step by step &gt; 1. Layers  
**Toolbar(s):** 14a Section  step by step · 14b Elevation step by step · 15a Floor plan step by step  
**Original English help:** Setting the colors and lweights of building elements so that they are distinguishable when drawing with a point cloud image as background.

#### `ID_ZLAYINS`
**English menu label:** Insert layers — ZLAYINS  
**Direct CAD command in menu/toolbar:** `ZLAYINS`  
**Displayed shortcut(s):** `ZLAYINS`  
**Menu location(s):** Layers &gt; Insert layers  
**Toolbar(s):** Layer Insert  
**Original English help:** New layers are imported into the drawing from predefined files of your choice which you can change.

#### `ID_ZLAYINS1`
**English menu label:** Insert list - 1 — ZLAYINS1  
**Direct CAD command in menu/toolbar:** `ZLAYINS1`  
**Displayed shortcut(s):** `ZLAYINS1`  
**Menu location(s):** Layers &gt; Insert layers &gt; Command line  
**Toolbar(s):** Layer Insert  
**Original English help:** Edit - 1. Set the name, color and line type of the Layers you want to import when you have selected case 1. You can also specify them with the ZVFE command.

#### `ID_ZLAYINS2`
**English menu label:** Insert list - 2 — ZLAYINS2  
**Direct CAD command in menu/toolbar:** `ZLAYINS2`  
**Displayed shortcut(s):** `ZLAYINS2`  
**Menu location(s):** Layers &gt; Insert layers &gt; Command line  
**Toolbar(s):** Layer Insert  
**Original English help:** Edit - 2. Define the name, color and line type of the layers you want to import when you have selected case 2. You can also specify them with the ZVFE command.

#### `ID_ZLAYINS3`
**English menu label:** Insert list - 3 — ZLAYINS3  
**Direct CAD command in menu/toolbar:** `ZLAYINS3`  
**Displayed shortcut(s):** `ZLAYINS3`  
**Menu location(s):** Layers &gt; Insert layers &gt; Command line  
**Toolbar(s):** Layer Insert  
**Original English help:** Edit - 3. Set the name, color and line type of the layers you want to import when you have selected the case 3. You can also specify them with the ZVFE command.

#### `ID_ZLAYINS4`
**English menu label:** Insert list - 4 — ZLAYINS4  
**Direct CAD command in menu/toolbar:** `ZLAYINS4`  
**Displayed shortcut(s):** `ZLAYINS4`  
**Menu location(s):** Layers &gt; Insert layers &gt; Command line  
**Toolbar(s):** Layer Insert  
**Original English help:** Edit - 4. Set the name, color and line type of the layers you want to import when you have selected the case 4. You can also specify them with the ZVFE command.

#### `ID_ZLAYINS5`
**English menu label:** Insert list - 5 — ZLAYINS5  
**Direct CAD command in menu/toolbar:** `ZLAYINS5`  
**Displayed shortcut(s):** `ZLAYINS5`  
**Menu location(s):** Layers &gt; Insert layers &gt; Command line  
**Toolbar(s):** Layer Insert  
**Original English help:** No matching HELPSTRINGS description in this MNU. Refer to the menu label and original manual.

#### `ID_ZLAYLIST`
**English menu label:** List all layer names — ZLAYLIST  
**Direct CAD command in menu/toolbar:** `zlaylist`, `ZLAYLIST`  
**Displayed shortcut(s):** `ZLAYLIST`  
**Menu location(s):** Topography &gt; Survey plan...step by step &gt; 2a. Manage survey points &gt; 2ac. On-Off other layers · Layers &gt; Layer Lists  
**Toolbar(s):** Layer Insert · Layer ONOFF · Layer Rename · Legend_Layer · 06 Layers  
**Original English help:** Opens a file with the names of drawing's layers.

#### `ID_ZLAYLISTP`
**English menu label:** Detailed layer list (Name Color Ltype) — ZLAYLISTP  
**Direct CAD command in menu/toolbar:** `zlaylistp`, `ZLAYLISTP`  
**Displayed shortcut(s):** `ZLAYLISTP`  
**Menu location(s):** Layers &gt; Layer Lists  
**Toolbar(s):** Layer Insert · Legend_Layer · 06 Layers  
**Original English help:** A file opens where the layers of the Drawing are displayed on each line in the format: layer '?' Color '?' Linetype. You can copy these items to the Edit ZLAYINS command files.

#### `ID_ZLAYREN`
**English menu label:** Rename layers — ZLAYREN  
**Direct CAD command in menu/toolbar:** `zlayren`, `ZLAYREN`  
**Displayed shortcut(s):** `ZLAYREN`  
**Menu location(s):** Layers &gt; Rename  
**Toolbar(s):** Layer Rename  
**Original English help:** Rename layers from a predefined List that you can modify, or by custom renaming.

#### `ID_ZLAYREN1`
**English menu label:** Rename - 1 — ZLAYREN1  
**Direct CAD command in menu/toolbar:** `ZLAYREN1`  
**Displayed shortcut(s):** `ZLAYREN1`  
**Menu location(s):** Layers &gt; Rename &gt; Command line  
**Toolbar(s):** Layer Rename  
**Original English help:** Edit - 1 In each line of this file you specify for which layers you want to be renamed with the ZLAYREN command.

#### `ID_ZLAYREN2`
**English menu label:** Rename - 2 — ZLAYREN2  
**Direct CAD command in menu/toolbar:** `ZLAYREN2`  
**Displayed shortcut(s):** `ZLAYREN2`  
**Menu location(s):** Layers &gt; Rename &gt; Command line  
**Toolbar(s):** Layer Rename  
**Original English help:** Edit - 2 In each line of this file you specify for which layers you want to be renamed with the ZLAYREN command.

#### `ID_ZLAYSEL`
**English menu label:** List selected layers names ZLAYSEL · List selected layers names — ZLAYSEL  
**Direct CAD command in menu/toolbar:** `ZLAYSEL`  
**Displayed shortcut(s):** `ZLAYSEL`  
**Menu location(s):** Topography &gt; Survey plan...step by step &gt; 2a. Manage survey points &gt; 2ac. On-Off other layers · Layers &gt; Layer Lists  
**Toolbar(s):** Layer Insert · Layer ONOFF · Layer Rename · Legend_Layer · 06 Layers  
**Original English help:** Opens a file with the layer names of whatever objects you select.

#### `ID_ZLAYSELP`
**English menu label:** Detailed selected layers list (N C L) — ZLAYSELP  
**Direct CAD command in menu/toolbar:** `ZLAYSELP`  
**Displayed shortcut(s):** `ZLAYSELP`  
**Menu location(s):** Layers &gt; Layer Lists  
**Toolbar(s):** Layer Insert · Legend_Layer · 06 Layers  
**Original English help:** No matching HELPSTRINGS description in this MNU. Refer to the menu label and original manual.

#### `ID_ZLL`
**English menu label:** Select other line — ZLL · Draw by choosing type — ZLL  
**Direct CAD command in menu/toolbar:** `ZLL`  
**Displayed shortcut(s):** `ZLL`  
**Menu location(s):** Topography &gt; Survey plan...step by step &gt; 3. Current plot layout · Lines  
**Toolbar(s):** 05 Lines · 16 Topography  
**Original English help:** Line, pline or arc with line type selection. During the design you can build points, type them, give a series of points and be informed about 3D points.

#### `ID_ZLLO`
**English menu label:** Draw property boundary ZLL  
**Direct CAD command in menu/toolbar:** `ZLLO`  
**Toolbar(s):** 16a Survey plan step by step  
**Original English help:** Design of axial lines of properties boundaries (axis of final and Initial property and other boundaries).

#### `ID_ZLLP`
**English menu label:** Draw legitimate lines ZLL  
**Direct CAD command in menu/toolbar:** `ZLLP`  
**Toolbar(s):** 16a Survey plan step by step  
**Original English help:** Line, pline or arc with a choice of line type for city lines or application of a road plan (Road Plan, Building, planned Arcades, Settlement boundary, Forest boundary, Aegialo-Paralia, etc.).

#### `ID_ZLLY`
**English menu label:** Existing layout ZLL  
**Direct CAD command in menu/toolbar:** `ZLLY`  
**Toolbar(s):** 16a Survey plan step by step  
**Original English help:** Line, pline or arc with a choice of line type for the existing layout (Buildings, Yards, railings, fences, curbs, existing galleries, terraces, streets, etc.).

#### `ID_ZLPT`
**English menu label:** Cut drawing detail — ZLPT  
**Direct CAD command in menu/toolbar:** `ZLPT`  
**Displayed shortcut(s):** `ZLPT`  
**Menu location(s):** Misc &gt; File-Print-Save As  
**Toolbar(s):** 12 Misc  
**Original English help:** Select a drawing area that is copied and enlarged according to the print scale.

#### `ID_ZMES`
**English menu label:** Measure many objects — ZMES  
**Direct CAD command in menu/toolbar:** `ZMES`  
**Displayed shortcut(s):** `ZMES`  
**Menu location(s):** Lines  
**Toolbar(s):** 05 Lines  
**Original English help:** Simultaneously execute the AutoCAD MEASURE command with nodes on multiple objects (Features: Select objects with filters, select point input distance , and select layer.

#### `ID_ZMIR`
**English menu label:** Mirror from base point — ZMIR  
**Direct CAD command in menu/toolbar:** `ZMIR`  
**Displayed shortcut(s):** `ZMIR`  
**Menu location(s):** Modify &gt; Modify-Change &gt; Scale-Rotate-Z  
**Toolbar(s):** 13 Modify  
**Original English help:** No matching HELPSTRINGS description in this MNU. Refer to the menu label and original manual.

#### `ID_ZMKPOL`
**English menu label:** Longitudinal section of 3Dpolyline — ZMKPOL  
**Direct CAD command in menu/toolbar:** `ZMKPOL`  
**Displayed shortcut(s):** `ZMKPOL`  
**Menu location(s):** Topography &gt; Triangles - Contours - Volume &gt; Cross section and longitudinal section  
**Toolbar(s):** 16b Triangles contours  
**Original English help:** No matching HELPSTRINGS description in this MNU. Refer to the menu label and original manual.

#### `ID_ZMKTOM`
**English menu label:** Longitudinal section on 3d faces — ZMKTOM  
**Direct CAD command in menu/toolbar:** `ZMKTOM`  
**Displayed shortcut(s):** `ZMKTOM`  
**Menu location(s):** Topography &gt; Triangles - Contours - Volume &gt; Cross section and longitudinal section  
**Toolbar(s):** 16b Triangles contours  
**Original English help:** No matching HELPSTRINGS description in this MNU. Refer to the menu label and original manual.

#### `ID_ZMM`
**English menu label:** Move — ZMM  
**Direct CAD command in menu/toolbar:** `zmm`, `ZMM`  
**Displayed shortcut(s):** `ZMM`  
**Menu location(s):** Modify &gt; Modify-Change &gt; Copy-Move-Erase  
**Toolbar(s):** 13 Modify  
**Original English help:** Move selected, by filters, objects .

#### `ID_ZMRS`
**English menu label:** Adjust image by common points — ZMRS · Modify image by matching points — ZMRS · Average move-rotate-scale — ZMRS  
**Direct CAD command in menu/toolbar:** `zmrs`, `ZMRS`  
**Displayed shortcut(s):** `ZMRS`  
**Menu location(s):** Topography &gt; Survey plan...step by step &gt; 12. Insert and adjust images · Images &gt; Modify images · Modify &gt; Settings  
**Toolbar(s):** 13 Modify · Insert and adjust images  
**Original English help:** Average MOVE - ROTATE - SCALE objects by any pairs of points you select.

#### `ID_ZMSB`
**English menu label:** Match block scale — ZMSB  
**Direct CAD command in menu/toolbar:** `ZMSB`  
**Displayed shortcut(s):** `ZMSB`  
**Menu location(s):** Blocks (symbols) &gt; Edit  
**Toolbar(s):** 03 Blocks  
**Original English help:** Select first the block that has the desired X, Y, Z Scale and then the blocks to get the same scales.

#### `ID_ZMX`
**English menu label:** Move to X — ZMX  
**Direct CAD command in menu/toolbar:** `zmx`, `ZMX`  
**Displayed shortcut(s):** `ZMX`  
**Menu location(s):** Modify &gt; Modify-Change &gt; Copy-Move-Erase  
**Toolbar(s):** 13 Modify  
**Original English help:** The items you select move only by X.

#### `ID_ZMY`
**English menu label:** Move to Y — ZMY  
**Direct CAD command in menu/toolbar:** `zmy`, `ZMY`  
**Displayed shortcut(s):** `ZMY`  
**Menu location(s):** Modify &gt; Modify-Change &gt; Copy-Move-Erase  
**Toolbar(s):** 13 Modify  
**Original English help:** The items you select move only by Y.

#### `ID_ZNM`
**English menu label:** Operations on text values that are numbers — ZNM · Basic operations on Text-numbers — ZNM  
**Direct CAD command in menu/toolbar:** `ZNM`  
**Displayed shortcut(s):** `ZNM`  
**Menu location(s):** Floor plans &gt; Floor plan...step by step &gt; 8a. Change elevation starting point · Math operations and calculations &gt; Change values  
**Toolbar(s):** 02 Numbers · Change datum level  
**Original English help:** Operations on texts that are numbers. You select the operation, the number and decimal places to be listed. You can select specific types of texts where the action will take place.

#### `ID_ZNMB`
**English menu label:** 8a. Change datum level — ZNMB · Operations on attribute values that are numbers — ZNMB · Basic operations on Block-numbers — ZNMB  
**Direct CAD command in menu/toolbar:** `ZNMB`  
**Displayed shortcut(s):** `ZNMB`  
**Menu location(s):** Topography &gt; Survey plan...step by step &gt; 8. Datum level · Floor plans &gt; Floor plan...step by step &gt; 8a. Change elevation starting point · Math operations and calculations &gt; Change values  
**Toolbar(s):** 02 Numbers · Change datum level · Level datum and tools  
**Original English help:** Operations on attribute values that are numbers. You select the operation, the number and decimal places to be listed. You can select specific types of Attributes or block where the action will take place

#### `ID_ZNMD`
**English menu label:** Numerical operations on dimensions — ZNMD · Basic operations on Dimensions — ZNMD  
**Direct CAD command in menu/toolbar:** `ZNMD`  
**Displayed shortcut(s):** `ZNMD`  
**Menu location(s):** Dimensions &gt; Dimensions Autocad type · Math operations and calculations &gt; Change values  
**Toolbar(s):** 11 Dimensions  
**Original English help:** Operations on dimension values that are numbers. You select the operation, the number and decimal places to be listed. You can select specific Dimension types where the action will take place.

#### `ID_ZNN`
**English menu label:** Select other annotation — ZNN · Select annotation type — ZNN · Select anotation type — ZNN  
**Direct CAD command in menu/toolbar:** `ZNN`  
**Displayed shortcut(s):** `ZNN`  
**Menu location(s):** Topography &gt; Survey plan...step by step &gt; [7. Annotations · Floor plans &gt; Floor plan...step by step &gt; 5. Annotations · Text &gt; [Add text  
**Toolbar(s):** 10 Annotations · Annotations · Topography annotations  
**Original English help:** Select annotation command from a form with sizing options.

#### `ID_ZONELAY`
**English menu label:** Location lines conversion — ZONELAY · Move to one layer — zoneLay  
**Direct CAD command in menu/toolbar:** `ZONELAY`, `zoneLay`  
**Displayed shortcut(s):** `ZONELAY`, `zoneLay`  
**Menu location(s):** Topography &gt; Survey plan...step by step &gt; 19. Image excerpts &gt; Step by step · Layers &gt; Modify layers  
**Toolbar(s):** 06 Layers · Excerpts  
**Original English help:** The objects you select are transferred to an existing or new layer while maintaining their Color and Linetype.

#### `ID_ZOPGEFOLDER`
**English menu label:** Open KMZ folder  
**Direct CAD command in menu/toolbar:** `ZOKMZ`  
**Menu location(s):** Misc &gt; Google Earth  
**Toolbar(s):** 12 Misc  
**Original English help:** No matching HELPSTRINGS description in this MNU. Refer to the menu label and original manual.

#### `ID_ZOT`
**English menu label:** City block table — ZPOT  
**Direct CAD command in menu/toolbar:** `ZPOT`  
**Displayed shortcut(s):** `ZPOT`  
**Menu location(s):** Topography &gt; Survey plan...step by step &gt; 20. Survey stations - system - city block  
**Original English help:** No matching HELPSTRINGS description in this MNU. Refer to the menu label and original manual.

#### `ID_ZP2T`
**English menu label:** Settings for results — ZP2T  
**Direct CAD command in menu/toolbar:** `ZP2T`  
**Displayed shortcut(s):** `ZP2T`  
**Menu location(s):** Math operations and calculations &gt; Math Operations and Objects  
**Toolbar(s):** 02 Numbers  
**Original English help:** Define settings to display the result or all of the operations on the screen. Options: Show result or entire action, multiply result, text before and after number, text size, decimal, Text or Mtext.

#### `ID_ZPARPO1`
**English menu label:** Interpretation of legend — ZPARPO1  
**Direct CAD command in menu/toolbar:** `ZPARPO1`  
**Displayed shortcut(s):** `ZPARPO1`  
**Menu location(s):** Floor plans &gt; Floor plan...step by step &gt; 6. Labels &gt; Legend of doors and windows by type  
**Toolbar(s):** Doors and windows by type  
**Original English help:** Opens a file that contains descriptions of the types of apertures (for SPARTYP or SPOTYP commands) that appear in the YPPP legend.

#### `ID_ZPARPOLIST`
**English menu label:** List of type codes — ZPARPOLIST  
**Direct CAD command in menu/toolbar:** `ZPARPOLIST`  
**Displayed shortcut(s):** `ZPARPOLIST`  
**Menu location(s):** Floor plans &gt; Floor plan...step by step &gt; 6. Labels &gt; Legend of doors and windows by type  
**Toolbar(s):** Doors and windows by type  
**Original English help:** Opens a file containing the types of openings (for SPARTYP or SPOTYP commands) contained in the drawing.

#### `ID_ZPASTE`
**English menu label:** Paste and rename layer — ZPASTE  
**Direct CAD command in menu/toolbar:** `ZPASTE`  
**Displayed shortcut(s):** `ZPASTE`  
**Menu location(s):** Sections-Elevation plans  
**Original English help:** Paste objects from another drawing and rename them according to the 3 initial letters of this design. Then purge is executed for the layers of the imported objects.

#### `ID_ZPB1`
**English menu label:** Block table - 1 — ZPB1  
**Direct CAD command in menu/toolbar:** `zpb1`, `ZPB1`  
**Displayed shortcut(s):** `ZPB1`  
**Menu location(s):** Blocks (symbols) &gt; Symbols coordinates chart  
**Toolbar(s):** Block table  
**Original English help:** a list of selected blocks on the screen with options for Attributes and block Type 1 is planned.

#### `ID_ZPB2`
**English menu label:** Block table - 2 — ZPB2  
**Direct CAD command in menu/toolbar:** `zpb2`, `ZPB2`  
**Displayed shortcut(s):** `ZPB2`  
**Menu location(s):** Blocks (symbols) &gt; Symbols coordinates chart  
**Toolbar(s):** Block table  
**Original English help:** a list of selected blocks on the screen with options for Attributes and block Type 2 is planned.

#### `ID_ZPB3`
**English menu label:** Block table - 3 — ZPB3  
**Direct CAD command in menu/toolbar:** `zpb3`, `ZPB3`  
**Displayed shortcut(s):** `ZPB3`  
**Menu location(s):** Blocks (symbols) &gt; Symbols coordinates chart  
**Toolbar(s):** Block table  
**Original English help:** a list of selected blocks on the screen with options for Attributes and block Type 3 is planned.

#### `ID_ZPB4`
**English menu label:** Block table - 4 — ZPB4  
**Direct CAD command in menu/toolbar:** `zpb4`, `ZPB4`  
**Displayed shortcut(s):** `ZPB4`  
**Menu location(s):** Blocks (symbols) &gt; Symbols coordinates chart  
**Toolbar(s):** Block table  
**Original English help:** a list of selected blocks on the screen with options for Attributes and block Type 4 is planned.

#### `ID_ZPB5`
**English menu label:** block table 5 ZPB2  
**Direct CAD command in menu/toolbar:** `ZPB5`  
**Toolbar(s):** Block table  
**Original English help:** No matching HELPSTRINGS description in this MNU. Refer to the menu label and original manual.

#### `ID_ZPBL`
**English menu label:** Other blocks table — ZPBL · Block table — ZPBL  
**Direct CAD command in menu/toolbar:** `zpbl`, `ZPBL`  
**Displayed shortcut(s):** `ZPBL`  
**Menu location(s):** Topography &gt; Coordinates &gt; Coordinates table-list · Blocks (symbols) &gt; Symbols coordinates chart  
**Toolbar(s):** Block table  
**Original English help:** A table is created where columns display the contents of selected Attributes and the coordinates of the blocks you select.

#### `ID_ZPDFIN`
**English menu label:** Insert PDF — ZPDFIN  
**Direct CAD command in menu/toolbar:** `ZPDFIN`  
**Displayed shortcut(s):** `ZPDFIN`  
**Menu location(s):** Misc &gt; Files  
**Toolbar(s):** 12 Misc  
**Original English help:** Insert pdf on layer with same name. The first time you run the command, the search address of the pdf file is defined as that of the drawing.

#### `ID_ZPFL`
**English menu label:** Table from file — ZPFL · table from file — ZPFL  
**Direct CAD command in menu/toolbar:** `ZPFL`, `zpfL`  
**Displayed shortcut(s):** `ZPFL`  
**Menu location(s):** Topography &gt; Coordinates &gt; Coordinates table-list · Misc &gt; Files  
**Toolbar(s):** 12 Misc  
**Original English help:** You select a file and a column separator, and a table is created listing the contents of the file.

#### `ID_ZPID`
**English menu label:** Table of Vertices — ZPID  
**Direct CAD command in menu/toolbar:** `ZPID`  
**Displayed shortcut(s):** `ZPID`  
**Menu location(s):** Topography &gt; Survey plan...step by step &gt; 15. Property's area documentation  
**Toolbar(s):** Property area documentation  
**Original English help:** A table is created in the columns of which the names and coordinates of the blocks are displayed for each property vertex you select.

#### `ID_ZPIK`
**English menu label:** Table of building vertices — ZPIK  
**Direct CAD command in menu/toolbar:** `ZPIK`  
**Displayed shortcut(s):** `ZPIK`  
**Menu location(s):** Topography &gt; Survey plan...step by step &gt; 16. Building's area, dims and vertices &gt; 16b. Building vertices  
**Toolbar(s):** Building documentation  
**Original English help:** A table is created in the columns of which the names and coordinates of the blocks are displayed for each building vertex you select.

#### `ID_ZPLINEWID`
**English menu label:** Thickness of new pline — ZPLINEWID  
**Direct CAD command in menu/toolbar:** `ZPLINEWID`  
**Displayed shortcut(s):** `ZPLINEWID`  
**Menu location(s):** Settings &gt; Various for Autocad  
**Toolbar(s):** 19 Settings  
**Original English help:** Define, by real number, the width for new polylines. This is the AutoCAD variable "PLINEWID".

#### `ID_ZPLOTSTYLES`
**English menu label:** Copy SDBOX plot styles  
**Direct CAD command in menu/toolbar:** `ZPLOTSTYLES`  
**Menu location(s):** Settings &gt; PlotStyles  
**Toolbar(s):** 19 Settings  
**Original English help:** The folder containing the sdbox * .ctb files (pens) will open. You can copy these files to the Autocad Plot Styles folder (Menu -&gt; File -&gt; Plot Style Manager).

#### `ID_ZPNGF`
**English menu label:** Copy fonts to folder — ZPNGF  
**Direct CAD command in menu/toolbar:** `ZPNGF`  
**Displayed shortcut(s):** `ZPNGF`  
**Menu location(s):** Settings &gt; Various for Autocad  
**Toolbar(s):** 19 Settings  
**Original English help:** Select the version of AutoCAD you wish and the corresponding sdbox fonts are copied so that the recipient reads the drawing correctly.

#### `ID_ZPOT`
**English menu label:** City block vertices table ZPOT  
**Direct CAD command in menu/toolbar:** `ZPOT`  
**Toolbar(s):** 16a Survey plan step by step  
**Original English help:** A table is added in the columns of which the names are displayed, the coordinates for each vertex of city block that you select on the screen.

#### `ID_ZPPOL`
**English menu label:** Survey stations table — ZPPOL  
**Direct CAD command in menu/toolbar:** `ZPPOL`  
**Displayed shortcut(s):** `ZPPOL`  
**Menu location(s):** Topography &gt; Survey plan...step by step &gt; 20. Survey stations - system - city block · Topography &gt; Coordinates &gt; Coordinates table-list · Topography &gt; Print tiles  
**Toolbar(s):** Coordinates table · 16a Survey plan step by step · 18a Print_Tiles  
**Original English help:** A table is created in the columns of which the names, the coordinates and the altitude of the blocks are displayed for each Station you select.

#### `ID_ZPRP`
**English menu label:** Reper table — ZPRP  
**Direct CAD command in menu/toolbar:** `ZPRP`  
**Displayed shortcut(s):** `ZPRP`  
**Menu location(s):** Topography &gt; Coordinates &gt; Coordinates table-list  
**Toolbar(s):** Coordinates table  
**Original English help:** A table is created in the columns of which the names, the coordinates and the height of the blocks are displayed for each Reper you select.

#### `ID_ZPTGE`
**English menu label:** Points to Google Earth — ZPTGE  
**Direct CAD command in menu/toolbar:** `ZPTGE`  
**Displayed shortcut(s):** `ZPTGE`  
**Menu location(s):** Misc &gt; Google Earth  
**Toolbar(s):** 12 Misc  
**Original English help:** No matching HELPSTRINGS description in this MNU. Refer to the menu label and original manual.

#### `ID_ZPTR`
**English menu label:** Triangulation stations table — ZPTR  
**Direct CAD command in menu/toolbar:** `ZPTR`  
**Displayed shortcut(s):** `ZPTR`  
**Menu location(s):** Topography &gt; Coordinates &gt; Coordinates table-list  
**Toolbar(s):** Coordinates table  
**Original English help:** A table is added in the columns of which the names, coordinates, altitudes, the height and the type of pedestal of the blocks are displayed for each triangulation station that you select.

#### `ID_ZR4`
**English menu label:** Rectangle by 4 points — ZR4  
**Direct CAD command in menu/toolbar:** `ZR4`  
**Displayed shortcut(s):** `ZR4`  
**Menu location(s):** Topography &gt; Survey plan...step by step &gt; 3a. Drawing Tools · Floor plans &gt; Floor plan...step by step &gt; 2a. Drawing tools · Sections-Elevation plans &gt; Section...step by step &gt; 3a. Section Drawing Tools · Sections-Elevation plans &gt; Elevation view...step by step &gt; 3a. Elevation Drawing tools · Lines  
**Toolbar(s):** 05 Lines · Drawing tools  
**Original English help:** Give a point for each side of the rectangle and a rectangle is drawn that includes these points.

#### `ID_ZRPL`
**English menu label:** Replace with block — ZRPL  
**Direct CAD command in menu/toolbar:** `ZRPL`  
**Displayed shortcut(s):** `ZRPL`  
**Menu location(s):** Modify &gt; Replace  
**Toolbar(s):** 13 Modify  
**Original English help:** You select through filters the objects that will be replaced with block of your choice on a predefined layer.

#### `ID_ZRPLQ`
**English menu label:** Rename question — ZRPLQ  
**Direct CAD command in menu/toolbar:** `ZRPLQ`  
**Displayed shortcut(s):** `ZRPLQ`  
**Menu location(s):** Modify &gt; Replace  
**Toolbar(s):** 13 Modify  
**Original English help:** You specify whether to rename the block that is inserted, if it already exists in the drawing. The case of renaming is only necessary when you have designed a new block that has the same name as one already in the design.

#### `ID_ZRPLR`
**English menu label:** Replace on original layer — ZRPLR  
**Direct CAD command in menu/toolbar:** `ZRPLR`  
**Displayed shortcut(s):** `ZRPLR`  
**Menu location(s):** Modify &gt; Replace  
**Toolbar(s):** 13 Modify  
**Original English help:** You select through the filters the objects that will be replaced with block of your choice on the layers where the original objects are designed.

#### `ID_ZRR`
**English menu label:** Rotate by base point — ZRR  
**Direct CAD command in menu/toolbar:** `ZRR`  
**Displayed shortcut(s):** `ZRR`  
**Menu location(s):** Modify &gt; Settings  
**Toolbar(s):** 13 Modify · Cadaster_Tools  
**Original English help:** Selected objects are rotated around their base point at the desired angle.

#### `ID_ZSB`
**English menu label:** Black Background — ZSB  
**Direct CAD command in menu/toolbar:** `ZSB`  
**Displayed shortcut(s):** `ZSB`  
**Menu location(s):** Views &gt; Background colour  
**Toolbar(s):** 09 Views and Vports  
**Original English help:** The screen is set to have a black background

#### `ID_ZSCLR`
**English menu label:** Select Background colour — ZSCLR  
**Direct CAD command in menu/toolbar:** `ZSCLR`  
**Displayed shortcut(s):** `ZSCLR`  
**Menu location(s):** Views &gt; Background colour  
**Toolbar(s):** 09 Views and Vports  
**Original English help:** Select a screen background color from a form that opens.

#### `ID_ZSELALLTABS`
**English menu label:** Implementation to all Spaces — ZSELALLTABS  
**Direct CAD command in menu/toolbar:** `ZSELALLTABS`  
**Displayed shortcut(s):** `ZSELALLTABS`  
**Menu location(s):** Modify &gt; Modify-Change  
**Toolbar(s):** 13 Modify  
**Original English help:** No matching HELPSTRINGS description in this MNU. Refer to the menu label and original manual.

#### `ID_ZSFILE`
**English menu label:** View File — ZSFILE  
**Direct CAD command in menu/toolbar:** `ZSFILE`  
**Displayed shortcut(s):** `ZSFILE`  
**Menu location(s):** Misc &gt; Files  
**Toolbar(s):** 12 Misc  
**Original English help:** A form opens where the selected file is displayed and you can apply filters and export parts of the file.

#### `ID_ZSKO`
**English menu label:** Staircase by 2 points — ZSKO  
**Direct CAD command in menu/toolbar:** `ZSKO`  
**Displayed shortcut(s):** `ZSKO`  
**Menu location(s):** Sections-Elevation plans &gt; Section...step by step &gt; 3a. Section Drawing Tools · Sections-Elevation plans &gt; Elevation view...step by step &gt; 3a. Elevation Drawing tools  
**Toolbar(s):** 14 Sections_Elevations · Tools for section and elevation plans  
**Original English help:** Automatic elevation of staircase by 2 points (start and end) and the number of steps.

#### `ID_ZSSDD`
**English menu label:** Open sdbox folder — ZSSDD  
**Direct CAD command in menu/toolbar:** `ZSSDD`  
**Displayed shortcut(s):** `ZSSDD`  
**Menu location(s):** Misc &gt; Files  
**Toolbar(s):** 12 Misc  
**Original English help:** The sdbox installation folder opens.

#### `ID_ZST`
**English menu label:** Insert Level-Height mark — ZST  
**Direct CAD command in menu/toolbar:** `zst`, `ZST`  
**Displayed shortcut(s):** `ZST`  
**Menu location(s):** Floor plans &gt; Floor plan...step by step &gt; 8. Level marks  
**Toolbar(s):** Floor plan levels  
**Original English help:** Enter level or height marks by type selection. You can also specify decimals, coefficients, etc. During command you can apply calculations or operations.

#### `ID_ZST0`
**English menu label:** 9. Insert datum level (0.00) — ZST  
**Direct CAD command in menu/toolbar:** `ZST0`  
**Displayed shortcut(s):** `ZST`  
**Menu location(s):** Topography &gt; Survey plan...step by step &gt; 8. Datum level  
**Toolbar(s):** Level datum and tools  
**Original English help:** Enter the elevation starting mark with ZST command.

#### `ID_ZST1`
**English menu label:** Description of symbols ZST1  
**Direct CAD command in menu/toolbar:** `ZST1`  
**Toolbar(s):** Floor plan levels  
**Original English help:** Opens the file with the descriptions of the symbols that appear on the ZST and ZSTA command tab.

#### `ID_ZSTA`
**English menu label:** Insert Level-Height block — ZSTA  
**Direct CAD command in menu/toolbar:** `zsta`, `ZSTA`  
**Displayed shortcut(s):** `ZSTA`  
**Menu location(s):** Floor plans &gt; Floor plan...step by step &gt; 8. Level marks  
**Toolbar(s):** Floor plan levels  
**Original English help:** Simple improt of level or height block.

#### `ID_ZSTADIR`
**Original English help:** The folder containing the blocks of the ZST and ZSTA commands opens.

#### `ID_ZSTDIR`
**English menu label:** Open folder ZSTDIR  
**Direct CAD command in menu/toolbar:** `ZSTDIR`  
**Toolbar(s):** Floor plan levels  
**Original English help:** No matching HELPSTRINGS description in this MNU. Refer to the menu label and original manual.

#### `ID_ZSTI`
**English menu label:** Modify short title — ZSTI  
**Direct CAD command in menu/toolbar:** `ZSTI`  
**Displayed shortcut(s):** `ZSTI`  
**Menu location(s):** Photos · Titles and legends &gt; T i t l e s &gt; Settings  
**Toolbar(s):** 17 Photos · 18 Legends  
**Original English help:** Opens the logotipo_mikro.dwg drawing that participates in the PHSTI2 command.

#### `ID_ZSTK`
**English menu label:** 10a. Basic level marks (groundfloor, roof ridge etc) — ZST  
**Direct CAD command in menu/toolbar:** `ZSTK`  
**Displayed shortcut(s):** `ZST`  
**Menu location(s):** Topography &gt; Survey plan...step by step &gt; 8. Datum level  
**Toolbar(s):** Level datum and tools  
**Original English help:** Use the ZST command with the option "zSt38 Level with note".

#### `ID_ZSTLIST`
**English menu label:** List of symbols ZSTLIST  
**Direct CAD command in menu/toolbar:** `ZSTLIST`  
**Toolbar(s):** Floor plan levels  
**Original English help:** Opens a file with level or height block names for ZST and ZSTA commands folder.

#### `ID_ZSTX`
**English menu label:** Align — ZSTX  
**Direct CAD command in menu/toolbar:** `ZSTX`  
**Displayed shortcut(s):** `ZSTX`  
**Menu location(s):** Modify &gt; Settings  
**Toolbar(s):** 13 Modify  
**Original English help:** Selected objects are aligned (moved) at an imaginary line or object of your choice.

#### `ID_ZSW`
**English menu label:** White Background — ZSW  
**Direct CAD command in menu/toolbar:** `ZSW`  
**Displayed shortcut(s):** `ZSW`  
**Menu location(s):** Views &gt; Background colour  
**Toolbar(s):** 09 Views and Vports  
**Original English help:** The screen is set to have a white background

#### `ID_ZSXEDIO`
**English menu label:** Change draw type (AsB, Arch, Ele, Heat, etc.) — ZSXEDIO · Select type of draw (AsB, Arch, Ele, Heat, etc) — ZSXEDIO  
**Direct CAD command in menu/toolbar:** `ZSXEDIO`  
**Displayed shortcut(s):** `ZSXEDIO`  
**Menu location(s):** Floor plans &gt; Settings · Sections-Elevation plans &gt; Settings · Layers &gt; Layer name prefix  
**Toolbar(s):** 14a Section  step by step · 14b Elevation step by step · 15a Floor plan step by step  
**Original English help:** By setting design type (asBuilt Architect Civil Electrical Facility Heating Interior Landscape Structural) an initial k-, A-, C-, H- etc. is added automatically in the corresponding layers.

#### `ID_ZTET`
**English menu label:** Insert boxed indicator — ZTET · Insert symbol in box — ZTET  
**Direct CAD command in menu/toolbar:** `ztet`, `ZTET`  
**Displayed shortcut(s):** `ZTET`  
**Menu location(s):** Floor plans &gt; Floor plan...step by step &gt; 5. Annotations &gt; Indicators in box · Sections-Elevation plans &gt; Section...step by step &gt; 9a. Other annotations &gt; Data in a chart · Sections-Elevation plans &gt; Elevation view...step by step &gt; 10. Annotations &gt; Data in a box · Blocks (symbols) &gt; Insert Symbols &gt; Data in a box  
**Toolbar(s):** bl Boxed indicators  
**Original English help:** Insert block into a scale that isrelative to print scale and library selection. In the library you can also define descriptions for each block.

#### `ID_ZTET1`
**English menu label:** Descriptions of indicators — ZTET1 · Symbols description — ZTET1  
**Direct CAD command in menu/toolbar:** `ZTET1`  
**Displayed shortcut(s):** `ZTET1`  
**Menu location(s):** Floor plans &gt; Floor plan...step by step &gt; 5. Annotations &gt; Indicators in box · Sections-Elevation plans &gt; Section...step by step &gt; 9a. Other annotations &gt; Data in a chart · Sections-Elevation plans &gt; Elevation view...step by step &gt; 10. Annotations &gt; Data in a box · Blocks (symbols) &gt; Insert Symbols &gt; Data in a box  
**Toolbar(s):** bl Boxed indicators  
**Original English help:** Open the file containing the block descriptions in a circle that appear on the ZTET command tab. You can modify the descriptions.

#### `ID_ZTETDIR`
**English menu label:** Open folder — ZTETDIR  
**Direct CAD command in menu/toolbar:** `ZTETDIR`  
**Displayed shortcut(s):** `ZTETDIR`  
**Menu location(s):** Floor plans &gt; Floor plan...step by step &gt; 5. Annotations &gt; Indicators in box · Sections-Elevation plans &gt; Section...step by step &gt; 9a. Other annotations &gt; Data in a chart · Sections-Elevation plans &gt; Elevation view...step by step &gt; 10. Annotations &gt; Data in a box · Blocks (symbols) &gt; Insert Symbols &gt; Data in a box  
**Toolbar(s):** bl Boxed indicators  
**Original English help:** Open folder with boxed symbols. You can modify existing or add new blocks.

#### `ID_ZTETLIST`
**English menu label:** List of indicators — ZTETLIST · List of boxed symbols — ZTETLIST  
**Direct CAD command in menu/toolbar:** `ZTETLIST`  
**Displayed shortcut(s):** `ZTETLIST`  
**Menu location(s):** Floor plans &gt; Floor plan...step by step &gt; 5. Annotations &gt; Indicators in box · Sections-Elevation plans &gt; Section...step by step &gt; 9a. Other annotations &gt; Data in a chart · Sections-Elevation plans &gt; Elevation view...step by step &gt; 10. Annotations &gt; Data in a box · Blocks (symbols) &gt; Insert Symbols &gt; Data in a box  
**Toolbar(s):** bl Boxed indicators  
**Original English help:** A file opens containing a list with block names on a table that appear on ZTET command form. You can copy this list to the description file for modification.

#### `ID_ZTIN`
**English menu label:** 5. Single triangles — ZTIN  
**Direct CAD command in menu/toolbar:** `ZTIN`  
**Displayed shortcut(s):** `ZTIN`  
**Menu location(s):** Topography &gt; Triangles - Contours - Volume &gt; Triangles  
**Toolbar(s):** 16b Triangles contours  
**Original English help:** Draw your own new triangles by selecting 3 points. It is enough to give a point near (not necessarily on the point) and the program will look for the nearest automatically, so no OSNAPS or exact selection is required.

#### `ID_ZTITLOI`
**English menu label:** 11. Titles and notations — ZTITLOI · 12. T i t l e s - L e g e n d s · 13. T i t l e s - N o t a t i o n — ZTITLOI · I n s e r t T i t l e — ZTITLOI  
**Direct CAD command in menu/toolbar:** `ZTITLOI`  
**Displayed shortcut(s):** `ZTITLOI`  
**Menu location(s):** Floor plans &gt; Floor plan...step by step · Sections-Elevation plans &gt; Section...step by step · Sections-Elevation plans &gt; Elevation view...step by step · Titles and legends &gt; T i t l e s  
**Toolbar(s):** 14a Section  step by step · 14b Elevation step by step · 15a Floor plan step by step · 18 Legends  
**Original English help:** Select the Title type to be inserted in the drawing. Then a Project database form opens where you can configure the fields for each project, export a list of drawings, etc.

#### `ID_ZTITLOIA`
**English menu label:** Excerpt title — ZTITLOIA  
**Direct CAD command in menu/toolbar:** `ZTITLOIA`  
**Displayed shortcut(s):** `ZTITLOIA`  
**Menu location(s):** Topography &gt; Survey plan...step by step &gt; 19. Image excerpts &gt; Step by step  
**Toolbar(s):** Excerpts  
**Original English help:** insert the Extract Heading (Application Diagram, Settlement 1: 5000, Road Extract)

#### `ID_ZTITLOID`
**English menu label:** Insert statements — ZTITLOID  
**Direct CAD command in menu/toolbar:** `ZTITLOID`  
**Displayed shortcut(s):** `ZTITLOID`  
**Menu location(s):** Topography &gt; Survey plan...step by step &gt; 17. Title - Statements  
**Original English help:** Enter the declarations of bulding laws.

#### `ID_ZTITLOIDS`
**English menu label:** Forest map declaration — ZTITLOIDS  
**Direct CAD command in menu/toolbar:** `ZTITLOIDS`  
**Displayed shortcut(s):** `ZTITLOIDS`  
**Menu location(s):** Topography &gt; Forest areas  
**Toolbar(s):** 21 FOREST  
**Original English help:** No matching HELPSTRINGS description in this MNU. Refer to the menu label and original manual.

#### `ID_ZTITLOIE`
**English menu label:** Survey system details — ZTITLOIE · Triangulation decleration — ZTITLOIE  
**Direct CAD command in menu/toolbar:** `ZTITLOIE`  
**Displayed shortcut(s):** `ZTITLOIE`  
**Menu location(s):** Topography &gt; Survey plan...step by step &gt; 20. Survey stations - system - city block · Topography &gt; Print tiles  
**Toolbar(s):** 16a Survey plan step by step · 18a Print_Tiles  
**Original English help:** Enter details for survey system.

#### `ID_ZTITLOIEXASF`
**English menu label:** Insert template for witnessing points — ZTITLOIEXASF  
**Direct CAD command in menu/toolbar:** `ZTITLOIEXASF`  
**Displayed shortcut(s):** `ZTITLOIEXASF`  
**Menu location(s):** Topography &gt; Witnessing points  
**Toolbar(s):** Witnessing points  
**Original English help:** …command under development

#### `ID_ZTITLOIO`
**English menu label:** Building restrictions — ZTITLOIO  
**Direct CAD command in menu/toolbar:** `ZTITLOIO`  
**Displayed shortcut(s):** `ZTITLOIO`  
**Menu location(s):** Topography &gt; Survey plan...step by step &gt; 17. Title - Statements  
**Original English help:** Building restrictions.

#### `ID_ZTITLOIPL`
**English menu label:** Layout: Tile Frame — ZTITLOIPL  
**Direct CAD command in menu/toolbar:** `ZTITLOIPL`  
**Displayed shortcut(s):** `ZTITLOIPL`  
**Menu location(s):** Topography &gt; Print tiles  
**Toolbar(s):** 18a Print_Tiles  
**Original English help:** No matching HELPSTRINGS description in this MNU. Refer to the menu label and original manual.

#### `ID_ZTITLOIPM`
**English menu label:** Model:viewport elements — ZTITLOIPM  
**Direct CAD command in menu/toolbar:** `ZTITLOIPM`  
**Displayed shortcut(s):** `ZTITLOIPM`  
**Menu location(s):** Topography &gt; Print tiles  
**Toolbar(s):** 18a Print_Tiles  
**Original English help:** No matching HELPSTRINGS description in this MNU. Refer to the menu label and original manual.

#### `ID_ZTITLOIS`
**English menu label:** Grid system — ZTITLOIS  
**Direct CAD command in menu/toolbar:** `ZTITLOIS`  
**Displayed shortcut(s):** `ZTITLOIS`  
**Menu location(s):** Topography &gt; Survey plan...step by step &gt; 11. Grid  
**Toolbar(s):** Grid -System details  
**Original English help:** Enter drawing Dependency System which is usually plaed in the upper left corner inside the grid (WGS84, Local etc).

#### `ID_ZTITLOIT`
**English menu label:** Insert Title — ZTITLOIT  
**Direct CAD command in menu/toolbar:** `ZTITLOIT`  
**Displayed shortcut(s):** `ZTITLOIT`  
**Menu location(s):** Topography &gt; Survey plan...step by step &gt; 17. Title - Statements  
**Original English help:** Select the Title box to insert into the drawing. Then a Project database opens where you can configure the fields for each project or, export a list of drawings, etc.

#### `ID_ZTITLOITOD`
**English menu label:** Titles-Statements-Building restrictions ZTITLOITOD  
**Direct CAD command in menu/toolbar:** `ZTITLOITOD`  
**Toolbar(s):** 16a Survey plan step by step  
**Original English help:** You choose from a form to enter the Title, the building conditions and the other statements and notes of the topographic survey.

#### `ID_ZTITLOITOPO`
**Original English help:** A block is inserted that includes all the information needed for the titles, the memoranda, the building conditions and the notes when compiling any usual topographic survey.

#### `ID_ZTLIST`
**English menu label:** List textstyles ZTLIST  
**Direct CAD command in menu/toolbar:** `ZTLIST`  
**Toolbar(s):** Text legend  
**Original English help:** A file opens that contains a list of TextStyles names contained in the drawing.

#### `ID_ZTLS`
**English menu label:** Detailed text List ZTLS  
**Direct CAD command in menu/toolbar:** `ZTLS`  
**Toolbar(s):** Text legend  
**Original English help:** Open a file of your choice that contains a detailed List (Name, Layer, Color, Height, etc.) of the Texts (Text, Mtext, ArcText) that you select in the Design.

#### `ID_ZTTDBL`
**English menu label:** 1. Delete double triangles — ZTTDBL  
**Direct CAD command in menu/toolbar:** `ZTTDBL`  
**Displayed shortcut(s):** `ZTTDBL`  
**Menu location(s):** Topography &gt; Triangles - Contours - Volume &gt; Triangles &gt; 9. Triangle check · Topography &gt; Triangles - Contours - Volume &gt; Excavation-Embankment Volume  
**Toolbar(s):** 16b Triangles contours · 16c Calculating volume  
**Original English help:** Execute the command of AutoCAD '' OVERKILL '', to delete any double triangles so that there is no problem in calculating contours or volume.

#### `ID_ZTTKK`
**English menu label:** 2. Search of vertical triangles — ZTTKK  
**Direct CAD command in menu/toolbar:** `ZTTKK`  
**Displayed shortcut(s):** `ZTTKK`  
**Menu location(s):** Topography &gt; Triangles - Contours - Volume &gt; Triangles &gt; 9. Triangle check · Topography &gt; Triangles - Contours - Volume &gt; Excavation-Embankment Volume  
**Toolbar(s):** 16b Triangles contours · 16c Calculating volume  
**Original English help:** Look for vertical or zero Triangles that are Result with a blue line to check and delete-correct, so that there is no problem in calculating contours or volume.

#### `ID_ZTTOM`
**English menu label:** Cross section on 3dfaces — ZTTOM  
**Direct CAD command in menu/toolbar:** `ZTTOM`  
**Displayed shortcut(s):** `ZTTOM`  
**Menu location(s):** Topography &gt; Triangles - Contours - Volume &gt; Cross section and longitudinal section  
**Toolbar(s):** 16b Triangles contours  
**Original English help:** No matching HELPSTRINGS description in this MNU. Refer to the menu label and original manual.

#### `ID_ZTTOMML`
**English menu label:** Multiple cr. sections on 3dfaces — ZTTOMML  
**Direct CAD command in menu/toolbar:** `ZTTOMML`  
**Displayed shortcut(s):** `ZTTOMML`  
**Menu location(s):** Topography &gt; Triangles - Contours - Volume &gt; Cross section and longitudinal section  
**Toolbar(s):** 16b Triangles contours  
**Original English help:** No matching HELPSTRINGS description in this MNU. Refer to the menu label and original manual.

#### `ID_ZTTSD`
**English menu label:** 3. Search of problematic triangles — ZTTSD  
**Direct CAD command in menu/toolbar:** `ZTTSD`  
**Displayed shortcut(s):** `ZTTSD`  
**Menu location(s):** Topography &gt; Triangles - Contours - Volume &gt; Triangles &gt; 9. Triangle check · Topography &gt; Triangles - Contours - Volume &gt; Excavation-Embankment Volume  
**Toolbar(s):** 16b Triangles contours · 16c Calculating volume  
**Original English help:** Each side of a triangle must belong to a maximum of two triangles. Look for sides that belong to more than two, and are Result with blue lines to check and delete-correct.

#### `ID_ZVBL`
**English menu label:** Zoom to label — ZVBL  
**Direct CAD command in menu/toolbar:** `zvbl`, `ZVBL`  
**Displayed shortcut(s):** `ZVBL`  
**Menu location(s):** Floor plans &gt; Floor plan...step by step &gt; 6. Labels  
**Toolbar(s):** Floor plan labels  
**Original English help:** The location of the openings to which you have added a label with the corresponding commands has been saved and you can zoom in with this command.

#### `ID_ZVF`
**English menu label:** Align Vports in Model — ZVF  
**Direct CAD command in menu/toolbar:** `ZVF`  
**Displayed shortcut(s):** `ZVF`  
**Menu location(s):** Sections-Elevation plans &gt; Section...step by step &gt; 2a. Insert floor plan - Vports - Lay on off · Sections-Elevation plans &gt; Elevation view...step by step &gt; 2a. Insert floor plan - Vports - Lay on off · Views &gt; Alignment  
**Toolbar(s):** 09 Views and Vports · Floor plan xref  
**Original English help:** You set 2 Vports in Model which will be aligned X or Y with each other when you run the ZVFF command.

#### `ID_ZVFE`
**English menu label:** Select and/or modify List — ZVFE  
**Direct CAD command in menu/toolbar:** `ZVFE`  
**Displayed shortcut(s):** `ZVFE`  
**Menu location(s):** Topography &gt; Survey plan...step by step &gt; 2a. Manage survey points &gt; 2ac. On-Off other layers · Topography &gt; Survey plan...step by step &gt; [7. Annotations · Sections-Elevation plans &gt; Section...step by step &gt; 2a. Insert floor plan - Vports - Lay on off · Sections-Elevation plans &gt; Elevation view...step by step &gt; 2a. Insert floor plan - Vports - Lay on off · Text &gt; [Add text · Layers &gt; On-Off · Layers &gt; Insert layers · Layers &gt; Rename · Misc &gt; Check List  
**Toolbar(s):** Lines legend · Text legend · Block legend · Layer Insert · Layer ONOFF · Legend_Layer · Hatch legend · Floor plan xref · Topography annotations  
**Original English help:** Select or modify the description files, data files, and list files displayed on tabs for the commands that use them.

#### `ID_ZVFF`
**English menu label:** Align vports by previous options — ZVFF  
**Direct CAD command in menu/toolbar:** `ZVFF`  
**Displayed shortcut(s):** `ZVFF`  
**Menu location(s):** Sections-Elevation plans &gt; Section...step by step &gt; 2a. Insert floor plan - Vports - Lay on off · Sections-Elevation plans &gt; Elevation view...step by step &gt; 2a. Insert floor plan - Vports - Lay on off · Views &gt; Alignment  
**Toolbar(s):** 09 Views and Vports · Floor plan xref  
**Original English help:** Vports alignment that you set with the ZVF command.

#### `ID_ZVK`
**English menu label:** Zoom to a column — ZVK  
**Direct CAD command in menu/toolbar:** `zvk`, `ZVK`  
**Displayed shortcut(s):** `ZVK`  
**Menu location(s):** Floor plans &gt; Floor plan...step by step &gt; 6. Labels  
**Toolbar(s):** Floor plan labels  
**Original English help:** The location of the Columns to which you have added a name and dimensions with the ZZDK command is saved and you can zoom in with this command.

#### `ID_ZVM`
**English menu label:** Make views — ZVM  
**Direct CAD command in menu/toolbar:** `ZVM`  
**Displayed shortcut(s):** `ZVM`  
**Menu location(s):** Views &gt; sdbox views  
**Toolbar(s):** 09 Views and Vports  
**Original English help:** You can save any aspect of the drawing as a view that you can recall with the ZVV command.

#### `ID_ZVMNL`
**English menu label:** Create layout — ZVMNL · New Layout — ZVMNL  
**Direct CAD command in menu/toolbar:** `ZVMNL`  
**Displayed shortcut(s):** `ZVMNL`  
**Menu location(s):** Topography &gt; Print tiles · Views &gt; Layout viewports  
**Toolbar(s):** 18a Print_Tiles  
**Original English help:** No matching HELPSTRINGS description in this MNU. Refer to the menu label and original manual.

#### `ID_ZVPLK`
**English menu label:** Survey points witnessing measures — ZVPLK · New Layout viewport by model center — ZVPLK  
**Direct CAD command in menu/toolbar:** `ZVPLK`  
**Displayed shortcut(s):** `ZVPLK`  
**Menu location(s):** Topography &gt; Witnessing points · Views &gt; Layout viewports  
**Toolbar(s):** 09 Views and Vports · Witnessing points  
**Original English help:** Set the rectangle of the new viewport in Layout, select its center in Model and provide display scale. You can also add the coordinates of the Center.

#### `ID_ZVPLY`
**English menu label:** Layout: viewport by selectin symbol — ZVPLY  
**Direct CAD command in menu/toolbar:** `ZVPLY`  
**Displayed shortcut(s):** `ZVPLY`  
**Menu location(s):** Topography &gt; Print tiles  
**Toolbar(s):** 18a Print_Tiles  
**Original English help:** No matching HELPSTRINGS description in this MNU. Refer to the menu label and original manual.

#### `ID_ZVPMC`
**English menu label:** New viewport from model (same coords) — ZVPMC · New viewport by Model coordinates — ZVPMC  
**Direct CAD command in menu/toolbar:** `ZVPMC`  
**Displayed shortcut(s):** `ZVPMC`  
**Menu location(s):** Topography &gt; Print tiles · Views &gt; Layout viewports  
**Toolbar(s):** 09 Views and Vports · 18a Print_Tiles  
**Original English help:** Specify an area in Model that appears in Layout by viewport at the same coordinates.

#### `ID_ZVPMW`
**English menu label:** New viewport (free position) — ZVPMW  
**Direct CAD command in menu/toolbar:** `ZVPMW`  
**Displayed shortcut(s):** `ZVPMW`  
**Menu location(s):** Views &gt; Layout viewports  
**Toolbar(s):** 09 Views and Vports  
**Original English help:** You define an area in Model that appears in Layout where you freely place the viewport.

#### `ID_ZVPS`
**English menu label:** One vport — ZV1  
**Direct CAD command in menu/toolbar:** `ZVPS`  
**Displayed shortcut(s):** `ZV1`  
**Menu location(s):** Views &gt; Split  
**Toolbar(s):** 09 Views and Vports  
**Original English help:** No matching HELPSTRINGS description in this MNU. Refer to the menu label and original manual.

#### `ID_ZVV`
**English menu label:** Select view — ZVV  
**Direct CAD command in menu/toolbar:** `ZVV`  
**Displayed shortcut(s):** `ZVV`  
**Menu location(s):** Views &gt; sdbox views  
**Toolbar(s):** 09 Views and Vports  
**Original English help:** Recall the views of the drawing you have created with the ZVM command.

#### `ID_ZWB`
**English menu label:** Export to new drawing zwblock — ZWB  
**Direct CAD command in menu/toolbar:** `ZWB`  
**Displayed shortcut(s):** `ZWB`  
**Menu location(s):** Misc &gt; File-Print-Save As  
**Toolbar(s):** 12 Misc  
**Original English help:** It works like the wblock of AutoCAD and in addition images, ctbs and fonts are copied to the folder of the new drawing.

#### `ID_ZWDXF`
**English menu label:** Export to dxf ZWDXF  
**Direct CAD command in menu/toolbar:** `ZWDXF`  
**Toolbar(s):** 12 Misc  
**Original English help:** Export part or all of the drawing to a DXF file (AutoAD version option) and additionally copy images, pens and fonts to the new drawing folder.

#### `ID_ZXAG`
**English menu label:** Export objects to file — ZXAG · Export to file — ZXAG  
**Direct CAD command in menu/toolbar:** `ZXAG`  
**Displayed shortcut(s):** `ZXAG`  
**Menu location(s):** Topography &gt; Coordinates &gt; Export to file · Misc &gt; Files  
**Toolbar(s):** 13 Modify · Export coordinates  
**Original English help:** Simple export of objects to a file where both the point of entry or the beginning and their content can be indicated.

#### `ID_ZXB1`
**English menu label:** Export block - 1 — ZXB1  
**Direct CAD command in menu/toolbar:** `zxb1`, `ZXB1`  
**Displayed shortcut(s):** `ZXB1`  
**Menu location(s):** Blocks (symbols) &gt; Export block to file  
**Toolbar(s):** Export block to File  
**Original English help:** Export attributes contents and coordinates by settings of type 1.

#### `ID_ZXB2`
**English menu label:** Export block - 2 — ZXB2  
**Direct CAD command in menu/toolbar:** `zxb2`, `ZXB2`  
**Displayed shortcut(s):** `ZXB2`  
**Menu location(s):** Blocks (symbols) &gt; Export block to file  
**Toolbar(s):** Export block to File  
**Original English help:** Export attributes contents and coordinates by settings of type 2.

#### `ID_ZXB3`
**English menu label:** Export block - 3 — ZXB3  
**Direct CAD command in menu/toolbar:** `zxb3`, `ZXB3`  
**Displayed shortcut(s):** `ZXB3`  
**Menu location(s):** Blocks (symbols) &gt; Export block to file  
**Toolbar(s):** Export block to File  
**Original English help:** Export attributes contents and coordinates by settings of type 3.

#### `ID_ZXB4`
**English menu label:** Export block - 4 — ZXB4  
**Direct CAD command in menu/toolbar:** `zxb4`, `ZXB4`  
**Displayed shortcut(s):** `ZXB4`  
**Menu location(s):** Blocks (symbols) &gt; Export block to file  
**Toolbar(s):** Export block to File  
**Original English help:** Export attributes contents and coordinates by settings of type 4.

#### `ID_ZXBL`
**English menu label:** Export block — ZXBL  
**Direct CAD command in menu/toolbar:** `zxbl`, `ZXBL`  
**Displayed shortcut(s):** `ZXBL`  
**Menu location(s):** Blocks (symbols) &gt; Export block to file  
**Toolbar(s):** Export block to File  
**Original English help:** Blocks are extracted in a file where each row contains the contents of selected attributes and the coordinates of the blocks you select.

#### `ID_ZXDDP`
**English menu label:** Polyline area analysis — ZXDDP  
**Direct CAD command in menu/toolbar:** `ZXDDP`  
**Displayed shortcut(s):** `ZXDDP`  
**Menu location(s):** Math operations and calculations &gt; Area  
**Toolbar(s):** 05 Lines  
**Original English help:** Select as many Polylines as you want in the drawing and export them to a file: Text or Mecht inside it (in the adjacent layer itself), the surface (excluding the interiors), the layer, the perimeter, the center, and the vertices. A 2nd file with the names and surfaces (* _PIN. *) Is also created for insertion in a table.

#### `ID_ZXGE`
**English menu label:** Export to Google Earth — ZXGE  
**Direct CAD command in menu/toolbar:** `ZXGE`  
**Displayed shortcut(s):** `ZXGE`  
**Menu location(s):** Misc &gt; Google Earth  
**Toolbar(s):** 12 Misc  
**Original English help:** No matching HELPSTRINGS description in this MNU. Refer to the menu label and original manual.

#### `ID_ZXGPT`
**English menu label:** Line,Pline,Arc,Spline points export — ZXGPT  
**Direct CAD command in menu/toolbar:** `ZXGPT`  
**Displayed shortcut(s):** `ZXGPT`  
**Menu location(s):** Topography &gt; Coordinates &gt; Export to file  
**Toolbar(s):** Export coordinates  
**Original English help:** Lines: Start and end points are exported. Pline: The peaks are extracted. Arc: The beginning and end points, the center and the midpoint are exported in the middle of the length. Spline: Start and end points and the middle of the length are extracted.

#### `ID_ZXID`
**English menu label:** Export property vertices — ZXID  
**Direct CAD command in menu/toolbar:** `ZXID`  
**Displayed shortcut(s):** `ZXID`  
**Menu location(s):** Topography &gt; Coordinates &gt; Export to file  
**Toolbar(s):** Export coordinates  
**Original English help:** Blocks for property vertices items are exported to a file where each row contains names and coordinates.

#### `ID_ZXIK`
**English menu label:** Export building vertices — ZXIK  
**Direct CAD command in menu/toolbar:** `ZXIK`  
**Displayed shortcut(s):** `ZXIK`  
**Menu location(s):** Topography &gt; Coordinates &gt; Export to file  
**Original English help:** No matching HELPSTRINGS description in this MNU. Refer to the menu label and original manual.

#### `ID_ZXPOL`
**English menu label:** Export stations — ZXPOL · Export survey stations — ZXPOL  
**Direct CAD command in menu/toolbar:** `ZXPOL`  
**Displayed shortcut(s):** `ZXPOL`  
**Menu location(s):** Topography &gt; Survey plan...step by step &gt; 8. Datum level &gt; 8b. Export points data to file · Topography &gt; Coordinates &gt; Export to file  
**Toolbar(s):** Export coordinates · Level datum and tools  
**Original English help:** Blocks for survey stations are exported to a file where each row contains the names, the coordinates and the altitude.

#### `ID_ZXREP`
**English menu label:** Reper export ZXREP  
**Direct CAD command in menu/toolbar:** `ZXREP`  
**Toolbar(s):** Export coordinates  
**Original English help:** No matching HELPSTRINGS description in this MNU. Refer to the menu label and original manual.

#### `ID_ZXRP`
**English menu label:** Export repers — ZXREP  
**Direct CAD command in menu/toolbar:** `ZXREP`  
**Displayed shortcut(s):** `ZXREP`  
**Menu location(s):** Topography &gt; Coordinates &gt; Export to file  
**Original English help:** Blocks for Reper contents are exported to a file where each row contains the names, coordinates and altitude.

#### `ID_ZXTAX`
**English menu label:** Export survey points — ZXTAX  
**Direct CAD command in menu/toolbar:** `ZXTAX`  
**Displayed shortcut(s):** `ZXTAX`  
**Menu location(s):** Topography &gt; Survey plan...step by step &gt; 8. Datum level &gt; 8b. Export points data to file · Topography &gt; Coordinates &gt; Export to file  
**Toolbar(s):** Export coordinates · Level datum and tools  
**Original English help:** Survey points blocks contents are exported to a file where each row contains the names, coordinates and altitude.

#### `ID_ZXTIN`
**English menu label:** 10. Export triangles to file — ZXTIN  
**Direct CAD command in menu/toolbar:** `ZXTIN`  
**Displayed shortcut(s):** `ZXTIN`  
**Menu location(s):** Topography &gt; Triangles - Contours - Volume &gt; Triangles  
**Toolbar(s):** 16b Triangles contours  
**Original English help:** You select (via filters) the triangles whose vertex coordinates are exported to a file. Each raw of the file is Xa,Ya,Za,Xb,Yb,Zb,Xc,Yc,Zc.. You can use this file in cross-section and volume calculators.

#### `ID_ZXTRI`
**English menu label:** Export triangulation stations — ZXTRI  
**Direct CAD command in menu/toolbar:** `ZXTRI`  
**Displayed shortcut(s):** `ZXTRI`  
**Menu location(s):** Topography &gt; Coordinates &gt; Export to file  
**Toolbar(s):** Export coordinates  
**Original English help:** Triangulation stations blovks are exported to a file where each row contains the names, the coordinates, the altitude and the height and type of pedestal.

#### `ID_ZYPBL`
**English menu label:** Symbols legend — ZYPBL · Blocks legend — ZYPBL · 10. Symbols legend — ZYPBL · Block legend — ZYPBL  
**Direct CAD command in menu/toolbar:** `ZYPBL`  
**Displayed shortcut(s):** `ZYPBL`  
**Menu location(s):** Topography &gt; Survey plan...step by step &gt; 18. Legend for Lines-Symbols-Hatch · Topography &gt; Print tiles · Floor plans &gt; Floor plan...step by step · Titles and legends · Blocks (symbols)  
**Toolbar(s):** Block legend · Lines-Symbols-Hatch legend · 18a Print_Tiles  
**Original English help:** A list is created on the screen (in the form of a memo) showing the different block types you have selected depending on block Name, Size, layer, Color, etc. and an description for each block.

#### `ID_ZYPBL1`
**English menu label:** List - 1 ZYPBL1  
**Direct CAD command in menu/toolbar:** `ZYPBL1`  
**Toolbar(s):** Block legend  
**Original English help:** Define - Open - Modify the first file of the descriptions displayed in the block legend.

#### `ID_ZYPBL2`
**English menu label:** List - 2 ZYPBL2  
**Direct CAD command in menu/toolbar:** `ZYPBL2`  
**Toolbar(s):** Block legend  
**Original English help:** Define - Open - Modify the 2nd file of the descriptions displayed in the block legend.

#### `ID_ZYPGR`
**English menu label:** Lines legend — ZYPGR · 10. Lines legend — ZYPGR  
**Direct CAD command in menu/toolbar:** `ZYPGR`  
**Displayed shortcut(s):** `ZYPGR`  
**Menu location(s):** Topography &gt; Survey plan...step by step &gt; 18. Legend for Lines-Symbols-Hatch · Topography &gt; Print tiles · Floor plans &gt; Floor plan...step by step · Titles and legends · Lines  
**Toolbar(s):** Lines legend · Lines-Symbols-Hatch legend · 18a Print_Tiles  
**Original English help:** A list is created on the screen (in the form of a memo) where the different types of Lines you have selected depending on Linetype, Scale, layer, Color, etc. are displayed. and description for each line.

#### `ID_ZYPGR1`
**English menu label:** List - 1 ZYPGR1  
**Direct CAD command in menu/toolbar:** `ZYPGR1`  
**Toolbar(s):** Lines legend  
**Original English help:** Define - Open - Modify the 1st file of the descriptions that appear in the Line legend.

#### `ID_ZYPGR2`
**English menu label:** List - 2 ZYPGR2  
**Direct CAD command in menu/toolbar:** `ZYPGR2`  
**Toolbar(s):** Lines legend  
**Original English help:** Define - Open - Modify the 2nd file of the descriptions that appear in the Lines legend.

#### `ID_ZYPHH`
**English menu label:** Hatch legend — ZYPHH · 10. Hatch legend — ZYPHH  
**Direct CAD command in menu/toolbar:** `ZYPHH`  
**Displayed shortcut(s):** `ZYPHH`  
**Menu location(s):** Topography &gt; Survey plan...step by step &gt; 18. Legend for Lines-Symbols-Hatch · Floor plans &gt; Floor plan...step by step · Titles and legends · Hatch  
**Toolbar(s):** Hatch legend · Lines-Symbols-Hatch legend  
**Original English help:** A list is created on the screen (in the form of a memo) where the various types of Hatch that you have selected depending on the Type, Scale, Layer, Color, etc. are displayed. and description for each line.

#### `ID_ZYPHH1`
**English menu label:** List - 1 ZYPHH1  
**Direct CAD command in menu/toolbar:** `ZYPHH1`  
**Toolbar(s):** Hatch legend  
**Original English help:** Define - Open - Modify the 1st file of the descriptions that appear in the Hatch legend.

#### `ID_ZYPHH2`
**English menu label:** List - 2 ZYPHH2  
**Direct CAD command in menu/toolbar:** `ZYPHH2`  
**Toolbar(s):** Hatch legend  
**Original English help:** Define - Open - Modify the 2nd description file that appears in the Hatch legend.

#### `ID_ZYPLAY`
**English menu label:** Layer legend — ZYPLAY · All layers legend — ZYPLAY  
**Direct CAD command in menu/toolbar:** `ZYPLAY`  
**Displayed shortcut(s):** `ZYPLAY`  
**Menu location(s):** Titles and legends · Layers  
**Toolbar(s):** Legend_Layer  
**Original English help:** A list is created on the screen (in the form of a memo) where the layer elements in the Drawing are displayed. For each layer are displayed: the name, description, the types of objects it contains and the different colors and linetype.

#### `ID_ZYPLAY1`
**English menu label:** List - 1 ZYPLAY1  
**Direct CAD command in menu/toolbar:** `ZYPLAY1`  
**Toolbar(s):** Legend_Layer  
**Original English help:** Define - Open - Modify the 1st file of the descriptions that appear in the layer legend.

#### `ID_ZYPLAY2`
**English menu label:** List - 2 ZYPLAY2  
**Direct CAD command in menu/toolbar:** `ZYPLAY2`  
**Toolbar(s):** Legend_Layer  
**Original English help:** Define - Open - Modify the 2nd file of the descriptions that appear in the layer legend.

#### `ID_ZYPLAYS`
**English menu label:** Layer legend of selected — ZYPLAYS · Selected layer legend — ZYPLAYS  
**Direct CAD command in menu/toolbar:** `ZYPLAYS`  
**Displayed shortcut(s):** `ZYPLAYS`  
**Menu location(s):** Titles and legends · Layers  
**Toolbar(s):** Legend_Layer  
**Original English help:** No matching HELPSTRINGS description in this MNU. Refer to the menu label and original manual.

#### `ID_ZYPTT`
**English menu label:** Text legend — ZYPTT  
**Direct CAD command in menu/toolbar:** `ZYPTT`  
**Displayed shortcut(s):** `ZYPTT`  
**Menu location(s):** Titles and legends · Text &gt; Edit text  
**Toolbar(s):** Text legend  
**Original English help:** A list is created on the screen (in the form of a memo) where the various types of Texts (Text, Mtext and Rtext) are displayed depending on the TextStyle, size, layer, Color, etc. and description for each type.

#### `ID_ZYPTT1`
**English menu label:** List - 1 ZYPTT1  
**Direct CAD command in menu/toolbar:** `ZYPTT1`  
**Toolbar(s):** Text legend  
**Original English help:** Define - Open - Modify the 1st file of the descriptions that appear in the Text legend.

#### `ID_ZYPTT2`
**English menu label:** List - 2 ZYPTT2  
**Direct CAD command in menu/toolbar:** `ZYPTT2`  
**Toolbar(s):** Text legend  
**Original English help:** Define - Open - Modify the 2nd file of the descriptions that appear in the Text legend.

#### `ID_ZZ`
**English menu label:** Draw by picking objects — ZZ  
**Direct CAD command in menu/toolbar:** `ZZ`, `Zz`  
**Displayed shortcut(s):** `ZZ`  
**Toolbar(s):** 01 Draw by picking objects · Modify 1  
**Original English help:** You select any AutoCAD object and a second similar one is drawn with same properties.

#### `ID_ZZ0`
**English menu label:** Move to Z=0 — ZZ0  
**Direct CAD command in menu/toolbar:** `zz0`, `ZZ0`  
**Displayed shortcut(s):** `ZZ0`  
**Menu location(s):** Modify &gt; Modify-Change &gt; Scale-Rotate-Z  
**Toolbar(s):** 13 Modify  
**Original English help:** The three-dimensional points of objects are transferred to Z = 0.00

#### `ID_ZZAPF`
**English menu label:** Pic points to display distance from pline's startpoint — ZZAPF  
**Direct CAD command in menu/toolbar:** `ZZAPF`  
**Displayed shortcut(s):** `ZZAPF`  
**Menu location(s):** Topography &gt; Distance locations on polyline  
**Original English help:** Display distance from polyline beginning at selected points.

#### `ID_ZZARIAL`
**English menu label:** Convert fonts to arial — ZZARIAL  
**Direct CAD command in menu/toolbar:** `ZZARIAL`  
**Displayed shortcut(s):** `ZZARIAL`  
**Menu location(s):** Text &gt; Edit text &gt; Text characters  
**Original English help:** You can set sdbox fonts to be displayed as Arial. You can also set Arial as textstyle for the rest of the fonts. (Note: Recommended in case of electronic delivery of your design).

#### `ID_ZZATT`
**English menu label:** Edit Attribute — ZZATT  
**Direct CAD command in menu/toolbar:** `ZZATT`  
**Displayed shortcut(s):** `ZZATT`  
**Menu location(s):** Blocks (symbols) &gt; Edit  
**Toolbar(s):** 03 Blocks  
**Original English help:** Edit attributes contents. Convert to capital letters or small, add phrases at the beginning or end, change phrases, change color, layer, or textStyle

#### `ID_ZZBASE`
**English menu label:** Projects database — zzbase  
**Direct CAD command in menu/toolbar:** `ZZBASE`  
**Displayed shortcut(s):** `zzbase`  
**Menu location(s):** Titles and legends &gt; T i t l e s &gt; Settings  
**Toolbar(s):** 18 Legends  
**Original English help:** No matching HELPSTRINGS description in this MNU. Refer to the menu label and original manual.

#### `ID_ZZCHECKFORUPDATES`
**English menu label:** Check for Updates  
**Direct CAD command in menu/toolbar:** `zzCheckForUpdates`  
**Menu location(s):** Settings  
**Toolbar(s):** 19 Settings  
**Original English help:** Check for a newer version of sdbox.

#### `ID_ZZCHR`
**English menu label:** Draw all text characters on screen — ZZCHR  
**Direct CAD command in menu/toolbar:** `ZZCHR`  
**Displayed shortcut(s):** `ZZCHR`  
**Menu location(s):** Text &gt; Edit text &gt; Text characters  
**Original English help:** Display all selected TextStyle characters corresponding to grsdtopo1.shx and enter the number of each character. To enter a character: Alt + 0 + number.

#### `ID_ZZCLF`
**English menu label:** Add layer filter from textfile — ZZCLF  
**Direct CAD command in menu/toolbar:** `ZZCLF`  
**Displayed shortcut(s):** `ZZCLF`  
**Menu location(s):** Layers &gt; Modify layers  
**Toolbar(s):** 06 Layers  
**Original English help:** Enter to a file that opens automatically the layers you want to include in a new layer Filter that you specify.

#### `ID_ZZDD`
**English menu label:** Construcion beams — ZZDD  
**Direct CAD command in menu/toolbar:** `zzdd`, `ZZDD`  
**Displayed shortcut(s):** `ZZDD`  
**Menu location(s):** Floor plans &gt; Floor plan...step by step &gt; 6. Labels &gt; by typing  
**Toolbar(s):** Floor plan labels  
**Original English help:** You select width and height and the name of the beam and then these are displayed on the screen.

#### `ID_ZZDDA`
**English menu label:** Deassociate dimensions — ZZDDA  
**Direct CAD command in menu/toolbar:** `ZZDDA`  
**Displayed shortcut(s):** `ZZDDA`  
**Menu location(s):** Dimensions &gt; Dimensions Autocad type  
**Toolbar(s):** 11 Dimensions  
**Original English help:** No matching HELPSTRINGS description in this MNU. Refer to the menu label and original manual.

#### `ID_ZZDK`
**English menu label:** Columns — ZZDK  
**Direct CAD command in menu/toolbar:** `zzdk`, `ZZDK`  
**Displayed shortcut(s):** `ZZDK`  
**Menu location(s):** Floor plans &gt; Floor plan...step by step &gt; 6. Labels &gt; by typing  
**Toolbar(s):** Floor plan labels  
**Original English help:** Select the basic dimensions and column name and then these are displayed in 2 lines of Text on the screen.

#### `ID_ZZFL`
**English menu label:** Insert useful layer filters — ZZLF  
**Direct CAD command in menu/toolbar:** `ZZLF`  
**Displayed shortcut(s):** `ZZLF`  
**Menu location(s):** Topography &gt; Settings  
**Toolbar(s):** 16 Topography  
**Original English help:** Layer Filters are imported in the drawing: '' KT '' '' OFF '' '' Oria '' '' 'Shmeia' '' '' Tiff '' '' 'Stathmes' '' '' Freezed ''

#### `ID_ZZHELP`
**Original English help:** Assistance

#### `ID_ZZI`
**English menu label:** Individual vertices — ZZI  
**Direct CAD command in menu/toolbar:** `ZZI`  
**Displayed shortcut(s):** `ZZI`  
**Menu location(s):** Topography &gt; Survey plan...step by step &gt; 15. Property's area documentation  
**Toolbar(s):** Property area documentation  
**Original English help:** Add property vertices with multiple naming capabilities when importing and designing on the screen (and exporting to file).

#### `ID_ZZINSPROPSCADD`
**English menu label:** Load saved settings — zzInsPropScadD  
**Direct CAD command in menu/toolbar:** `zzInsPropScadD`  
**Displayed shortcut(s):** `zzInsPropScadD`  
**Menu location(s):** Settings &gt; Settings for Layer, Color, size  
**Toolbar(s):** 19 Settings  
**Original English help:** Load settings for Layer, Color, Ltype, factors, etc. suggested at the beginning of the commands, from a previously created file.

#### `ID_ZZK`
**English menu label:** Adding individual building vertices — ZZK  
**Direct CAD command in menu/toolbar:** `ZZK`  
**Displayed shortcut(s):** `ZZK`  
**Menu location(s):** Topography &gt; Survey plan...step by step &gt; 16. Building's area, dims and vertices &gt; 16b. Building vertices  
**Toolbar(s):** Building documentation  
**Original English help:** Add building vertices with multiple naming capabilities when inserting and designing on the screen (and the ability to export to a file).

#### `ID_ZZKLIM`
**English menu label:** Set/Change print scale  
**Menu location(s):** PRINT SCALE: 1/  
**Original English help:** Change print scale for sdbox commands. (The LtypeScale and blocks are not affected).

#### `ID_ZZLAYEMANCLAS`
**English menu label:** Layer Manager Classic  
**Direct CAD command in menu/toolbar:** `zzlayemanClas`  
**Menu location(s):** Settings &gt; Various for Autocad &gt; Layer Manager  
**Original English help:** No matching HELPSTRINGS description in this MNU. Refer to the menu label and original manual.

#### `ID_ZZLAYEMANDYN`
**English menu label:** Layer Manager Dynamic  
**Direct CAD command in menu/toolbar:** `zzlayemanDyn`  
**Menu location(s):** Settings &gt; Various for Autocad &gt; Layer Manager  
**Original English help:** No matching HELPSTRINGS description in this MNU. Refer to the menu label and original manual.

#### `ID_ZZLOUT64`
**English menu label:** Show more viewports  
**Menu location(s):** Settings &gt; Various for Autocad  
**Original English help:** No matching HELPSTRINGS description in this MNU. Refer to the menu label and original manual.

#### `ID_ZZLTYPE`
**English menu label:** Insert sdbox Linetypes — ZZLTYPE  
**Direct CAD command in menu/toolbar:** `ZZLTYPE`  
**Displayed shortcut(s):** `ZZLTYPE`  
**Menu location(s):** Lines  
**Original English help:** No matching HELPSTRINGS description in this MNU. Refer to the menu label and original manual.

#### `ID_ZZMAKEAUTOCADLIGHTER`
**English menu label:** Make AutoCAD lighter  
**Direct CAD command in menu/toolbar:** `zzMakeAutocadLighter`  
**Menu location(s):** Settings &gt; Various for Autocad  
**Original English help:** No matching HELPSTRINGS description in this MNU. Refer to the menu label and original manual.

#### `ID_ZZMAKESAVELIGHTER`
**English menu label:** Make Save faster  
**Direct CAD command in menu/toolbar:** `zzMakeSaveLighter`  
**Menu location(s):** Settings &gt; Various for Autocad  
**Original English help:** No matching HELPSTRINGS description in this MNU. Refer to the menu label and original manual.

#### `ID_ZZMNUBAR`
**English menu label:** Show Menubar  
**Menu location(s):** Settings &gt; Various for Autocad  
**Original English help:** The classic AutoCAD Menubar is displayed without affecting the Ribbon settings.

#### `ID_ZZPDF`
**English menu label:** Print to PDF ZZPDF  
**Direct CAD command in menu/toolbar:** `ZZPDF`  
**Toolbar(s):** 12 Misc  
**Original English help:** Automatic printing to PDF. You only select the area and all the rest is done by sdbox.

#### `ID_ZZRIBCLOS`
**English menu label:** Hide Ribbon  
**Menu location(s):** Settings &gt; Various for Autocad  
**Original English help:** The Ribbons are closing.

#### `ID_ZZRIBOPEN`
**English menu label:** Show Ribbon  
**Menu location(s):** Settings &gt; Various for Autocad  
**Original English help:** The Ribbons open.

#### `ID_ZZS`
**English menu label:** Select-View Objects — ZZS  
**Direct CAD command in menu/toolbar:** `zzs`, `ZZS`  
**Displayed shortcut(s):** `ZZS`  
**Menu location(s):** Modify &gt; Select  
**Toolbar(s):** 13 Modify  
**Original English help:** Select obects and zoom to each one for view or edit.

#### `ID_ZZSA`
**English menu label:** Select to change properties — ZZSA  
**Direct CAD command in menu/toolbar:** `zzsa`, `ZZSA`  
**Displayed shortcut(s):** `ZZSA`  
**Menu location(s):** Modify &gt; Select  
**Toolbar(s):** 13 Modify  
**Original English help:** Select objects by sdbox filters and change their properties or execute any AutoCAD command.

#### `ID_ZZSAVEPROPSCADD`
**English menu label:** Export settings — zzSavePropScadD  
**Direct CAD command in menu/toolbar:** `zzSavePropScadD`  
**Displayed shortcut(s):** `zzSavePropScadD`  
**Menu location(s):** Settings &gt; Settings for Layer, Color, size  
**Toolbar(s):** 19 Settings  
**Original English help:** The settings for Layer, Color, Ltype, coefficients, etc. suggested by sdbox are saved in a file from which they can be uploaded to another computer.

#### `ID_ZZSDBXLR`
**English menu label:** Convert layers to as-built — ZZSDBXLR · Convert to layers As-built — ZZSDBXLR · Convert layers to As-built — ZZSDBXLR · Convert old layers to As-Built  
**Direct CAD command in menu/toolbar:** `ZZSDBXLR`  
**Displayed shortcut(s):** `ZZSDBXLR`  
**Menu location(s):** Floor plans &gt; Floor plan...step by step &gt; 1. Floor plan Layers · Sections-Elevation plans &gt; Section...step by step &gt; 1. SECTION layers · Sections-Elevation plans &gt; Elevation view...step by step &gt; 1. Layers · Layers &gt; Layer name prefix  
**Toolbar(s):** 14a Section  step by step · 14b Elevation step by step · 15a Floor plan step by step  
**Original English help:** The existing layers of the design such as e.g. ''LV1_WALLS'' are renamed to ''LV1_k_WALLS''.

#### `ID_ZZSDTOPOCADPENAKIA`
**English menu label:** Basic plotsytles width and color  
**Direct CAD command in menu/toolbar:** `zzSdtopoCADPenakia`, `ZZSDTOPOCADPENAKIA`  
**Menu location(s):** Settings &gt; PlotStyles  
**Toolbar(s):** 19 Settings  
**Original English help:** No matching HELPSTRINGS description in this MNU. Refer to the menu label and original manual.

#### `ID_ZZSDTOPOCADPENAKIA2`
**English menu label:** Detailed plotsytles width and color list (Excel)  
**Direct CAD command in menu/toolbar:** `zzSdtopoCADPenakia2`  
**Menu location(s):** Settings &gt; PlotStyles  
**Original English help:** No matching HELPSTRINGS description in this MNU. Refer to the menu label and original manual.

#### `ID_ZZSKF`
**English menu label:** Select by center and radius — ZZSKF  
**Direct CAD command in menu/toolbar:** `ZZSKF`  
**Displayed shortcut(s):** `ZZSKF`  
**Menu location(s):** Modify &gt; Select  
**Toolbar(s):** 13 Modify  
**Original English help:** No matching HELPSTRINGS description in this MNU. Refer to the menu label and original manual.

#### `ID_ZZSP`
**English menu label:** Continue object selection — ZZSP  
**Direct CAD command in menu/toolbar:** `zzsp`, `ZZSP`  
**Displayed shortcut(s):** `ZZSP`  
**Menu location(s):** Modify &gt; Select  
**Toolbar(s):** 13 Modify  
**Original English help:** Continue the ZZS command if you have interrupted it.

#### `ID_ZZSS`
**English menu label:** Previous selection — ZZSS  
**Direct CAD command in menu/toolbar:** `zzss`, `ZZSS`  
**Displayed shortcut(s):** `ZZSS`  
**Menu location(s):** Modify &gt; Select  
**Toolbar(s):** 13 Modify  
**Original English help:** Select all objects that participated in the last use of the ZZS command.

#### `ID_ZZSTARTP`
**English menu label:** Remove Start label  
**Menu location(s):** Settings &gt; Various for Autocad  
**Original English help:** No matching HELPSTRINGS description in this MNU. Refer to the menu label and original manual.

#### `ID_ZZTAG`
**English menu label:** Change 'name' Tag — ZZTAG  
**Direct CAD command in menu/toolbar:** `ZZTAG`  
**Displayed shortcut(s):** `ZZTAG`  
**Menu location(s):** Blocks (symbols) &gt; Edit  
**Toolbar(s):** 03 Blocks  
**Original English help:** Edit Attribute (TAG) of a block. Conversion to capital letters or small, adding prefix or suffix, changing phrases.

#### `ID_ZZTRS1`
**English menu label:** 1. Regular triangles (Total Station or GPS) — ZZTRS1  
**Direct CAD command in menu/toolbar:** `ZZTRS1`  
**Displayed shortcut(s):** `ZZTRS1`  
**Menu location(s):** Topography &gt; Triangles - Contours - Volume &gt; Triangles &gt; Mapping types  
**Original English help:** Search range for points will be set to 1.0 (for commands ZTIN, TTR, and TTD).

#### `ID_ZZTRS2`
**English menu label:** 2. Detailed mapping — ZZTRS2  
**Direct CAD command in menu/toolbar:** `ZZTRS2`  
**Displayed shortcut(s):** `ZZTRS2`  
**Menu location(s):** Topography &gt; Triangles - Contours - Volume &gt; Triangles &gt; Mapping types  
**Original English help:** Search range for points will be set to 0.5 (for commands ZTIN, TTR, and TTD).

#### `ID_ZZTRS3`
**English menu label:** 3. Aerial photography mapping — ZZTRS3  
**Direct CAD command in menu/toolbar:** `ZZTRS3`  
**Displayed shortcut(s):** `ZZTRS3`  
**Menu location(s):** Topography &gt; Triangles - Contours - Volume &gt; Triangles &gt; Mapping types  
**Original English help:** Search range for points will be set to 0.1 (for commands ZTIN, TTR, and TTD).

#### `ID_ZZTRS4`
**English menu label:** 4. Custom mapping — ZZTRS4  
**Direct CAD command in menu/toolbar:** `ZZTRS4`  
**Displayed shortcut(s):** `ZZTRS4`  
**Menu location(s):** Topography &gt; Triangles - Contours - Volume &gt; Triangles &gt; Mapping types  
**Original English help:** Custom search range for points for commands ZTIN, TTR, and TTD.

#### `ID_ZZVVIM`
**English menu label:** Insert sdbox views — ZZVVIM  
**Direct CAD command in menu/toolbar:** `ZZVVIM`  
**Displayed shortcut(s):** `ZZVVIM`  
**Menu location(s):** Floor plans &gt; Floor plan...step by step &gt; 6. Labels · Views &gt; sdbox views  
**Toolbar(s):** 09 Views and Vports · Floor plan labels  
**Original English help:** Import sdbox views that you have created in another drawing with the ZVM command.

#### `ID_ZZXTH`
**English menu label:** Add position marks on plines — ZZXTH  
**Direct CAD command in menu/toolbar:** `ZZXTH`  
**Displayed shortcut(s):** `ZZXTH`  
**Menu location(s):** Topography &gt; Distance locations on polyline  
**Original English help:** Add position marks at specific intervals on polylines.

### MNU # {#mnu-other}

#### `ID_00`
**English menu label:** Curent layer: 0 — 00  
**Displayed shortcut(s):** `00`  
**Menu location(s):** Layers &gt; Modify layers  
**Toolbar(s):** 06 Layers  
**Original English help:** The current layer of the drawing is set to '' 0 ''.

#### `ID_01`
**English menu label:** Current Layer: PROP-BNDY — 01  
**Displayed shortcut(s):** `01`  
**Menu location(s):** Topography &gt; Survey plan...step by step &gt; 13a. Lines study tools &gt; Quick current layer set  
**Toolbar(s):** Tools  
**Original English help:** No matching HELPSTRINGS description in this MNU. Refer to the menu label and original manual.

#### `ID_02`
**English menu label:** Current Layer: WALL-SECT — 02  
**Displayed shortcut(s):** `02`  
**Menu location(s):** Topography &gt; Survey plan...step by step &gt; 13a. Lines study tools &gt; Quick current layer set  
**Toolbar(s):** Tools  
**Original English help:** No matching HELPSTRINGS description in this MNU. Refer to the menu label and original manual.

#### `ID_03`
**English menu label:** Current Layer: MISC — 03  
**Displayed shortcut(s):** `03`  
**Menu location(s):** Topography &gt; Survey plan...step by step &gt; 13a. Lines study tools &gt; Quick current layer set  
**Toolbar(s):** Tools  
**Original English help:** No matching HELPSTRINGS description in this MNU. Refer to the menu label and original manual.

#### `ID_04`
**English menu label:** Current Layer: SIDE-WALL — 04  
**Displayed shortcut(s):** `04`  
**Menu location(s):** Topography &gt; Survey plan...step by step &gt; 13a. Lines study tools &gt; Quick current layer set  
**Toolbar(s):** Tools  
**Original English help:** No matching HELPSTRINGS description in this MNU. Refer to the menu label and original manual.

#### `ID_05`
**English menu label:** Current Layer: BLDG — 05  
**Displayed shortcut(s):** `05`  
**Menu location(s):** Topography &gt; Survey plan...step by step &gt; 13a. Lines study tools &gt; Quick current layer set  
**Toolbar(s):** Tools  
**Original English help:** No matching HELPSTRINGS description in this MNU. Refer to the menu label and original manual.

#### `ID_06`
**English menu label:** Current Layer: FENC-WIRE — 06  
**Displayed shortcut(s):** `06`  
**Menu location(s):** Topography &gt; Survey plan...step by step &gt; 13a. Lines study tools &gt; Quick current layer set  
**Toolbar(s):** Tools  
**Original English help:** No matching HELPSTRINGS description in this MNU. Refer to the menu label and original manual.

#### `ID_07`
**English menu label:** Current Layer: TTLB-LEGN — 07  
**Displayed shortcut(s):** `07`  
**Menu location(s):** Topography &gt; Survey plan...step by step &gt; 13a. Lines study tools &gt; Quick current layer set  
**Toolbar(s):** Tools  
**Original English help:** No matching HELPSTRINGS description in this MNU. Refer to the menu label and original manual.

#### `ID_222K`
**Original English help:** It is possible to add the design attribute (As-built, Architecture, etc.) to general layers (such as MISC, ANNO-DIMS, TTLB-LEGN, etc.).

#### `ID_2R`
**English menu label:** 21. Clean boundary for printing (**_OFF) — 2R · Move to layer with prefix-suffix — 2R  
**Displayed shortcut(s):** `2R`  
**Menu location(s):** Topography &gt; Survey plan...step by step · Layers &gt; Modify layers  
**Toolbar(s):** 06 Layers · 16a Survey plan step by step  
**Original English help:** Copy items to a selected layer and / or move the originals to a layer with the original name and prefix or suffix of your choice.

#### `ID_2RM`
**English menu label:** Mult. move to layer with prefix-suffix — 2RM  
**Displayed shortcut(s):** `2RM`  
**Menu location(s):** Layers &gt; Modify layers  
**Toolbar(s):** 06 Layers  
**Original English help:** Bulk copy objects to a selected layer and / or transfer the originals to a layer with the original name and prefix or suffix of your choice.

#### `ID_3DLL`
**English menu label:** Update 3D points notifiation — 3DLL  
**Displayed shortcut(s):** `3DLL`  
**Menu location(s):** Topography &gt; Settings  
**Toolbar(s):** 16 Topography  
**Original English help:** Update notification for 3D Points. When, in all the commands that contain this parameter, you select points whose Z is not 0.00 then you are informed if you wish.

#### `ID_3DPP`
**English menu label:** 3D perpendicular to line — 3DPP  
**Displayed shortcut(s):** `3DPP`  
**Menu location(s):** Lines  
**Toolbar(s):** 05 Lines  
**Original English help:** Draw a new line perpendicular to another (3D). Procedure: a. The side on which the line will be Result, b. the point at which the vertical will be Result, c. give the desired length of the vertical line and d. the Z of the vertical.

#### `ID_3LETCLEARLIST`
**English menu label:** Clear floor indicator prefix list  
**Menu location(s):** Floor plans &gt; Settings · Layers &gt; Layer name prefix  
**Toolbar(s):** 14a Section  step by step · 14b Elevation step by step · 15a Floor plan step by step  
**Original English help:** No matching HELPSTRINGS description in this MNU. Refer to the menu label and original manual.

#### `ID_3LETLAYK`
**English menu label:** Floor indicator (3 letters) prefix — 3letlayK  
**Displayed shortcut(s):** `3letlayK`  
**Menu location(s):** Floor plans &gt; Settings · Layers &gt; Layer name prefix  
**Toolbar(s):** 15a Floor plan step by step  
**Original English help:** Three (3) letters are automaticly added to each layer of floor plan as indicator of level. Example: If "1st_A-PROJECTIONS '' is the current layer and you chose to draw wall section then layer '' 1st_A-WALLS '' will be suggested.

#### `ID_3LETLAYN`
**English menu label:** Cancel floor or drawing indicator prefix — 3letlayN  
**Displayed shortcut(s):** `3letlayN`  
**Menu location(s):** Floor plans &gt; Settings · Sections-Elevation plans &gt; Settings · Layers &gt; Layer name prefix  
**Toolbar(s):** 14a Section  step by step · 14b Elevation step by step · 15a Floor plan step by step  
**Original English help:** Cancel adding the first 3 letter prefix to floor plan, section and elevation layers.

#### `ID_3LETLAYT`
**English menu label:** Type of drawing indicator (3 letters) prefix — 3letlayT  
**Displayed shortcut(s):** `3letlayT`  
**Menu location(s):** Sections-Elevation plans &gt; Settings  
**Toolbar(s):** 14a Section  step by step · 14b Elevation step by step  
**Original English help:** Three (3) letters are automaticly added to each layer of section or elevation as indicator of drawing. Example: If "TAA_A-PROJECTIONS '' is the current layer and you chose to draw wall section then layer '' TAA_A-WALLS '' will be suggested.

#### `ID_50100SCALE`
**English menu label:** Set default or minimum scale — 50100Scale  
**Displayed shortcut(s):** `50100Scale`  
**Menu location(s):** Floor plans &gt; Settings · Sections-Elevation plans &gt; Settings  
**Toolbar(s):** 14a Section  step by step · 14b Elevation step by step · 15a Floor plan step by step  
**Original English help:** Default settings of SDBOX are set so that level symbols and indicators for scales from 1: 1 to 1: 100 are inserted "larger" to be able to printed also on larger scales. By this setting you can change this and import them normally with their minimum sizes, for space saving.

## 24. Find functions by task (original English menu descriptions)

The terms in this section are derived from English MNU help descriptions and menu labels, retaining only command entries supported by the current English CUIX. Use the detailed entry above for the exact command and original wording. Some functions legitimately occur in more than one category.

### Survey, points and property diagrams (175 reference entries)

- `2R` — Copy items to a selected layer and / or move the originals to a layer with the original name and prefix or suffix of your choice. (menu ID `ID_2R`).
- `3DLL` — Update notification for 3D Points. When, in all the commands that contain this parameter, you select points whose Z is not 0.00 then you are informed if you wish. (menu ID `ID_3DLL`).
- `3DPP` — Draw a new line perpendicular to another (3D). Procedure: a. The side on which the line will be Result, b. the point at which the vertical will be Result, c. give the des… (menu ID `ID_3DPP`).
- `ADDPP` — Select a point anywhere on screen and it is added between the nearest Polyline vertices. (menu ID `ID_ADDPP`).
- `BFF` — Repeated offset at a specified distance by selecting points within closed areas. (menu ID `ID_BFF`).
- `BFF2` — Repeatable duble offset at 2 defined distances with selection of points within closed areas. (menu ID `ID_BFF2`).
- `BLST` — Calculation of optimal line giving the points through which a line will pass as close as possible. (menu ID `ID_BLST`).
- `bs` — Ladder arrow indication. You select the beginning, intermediate points of change of direction and the end of the ladder. Result: Circle at the beginning, Polyline for the… (menu ID `ID_BS`).
- `bsa` — Ladder arrow indication. You select the beginning, intermediate points of change of direction and the end of the ladder. Result: hidden Polyline for the intermediate poin… (menu ID `ID_BSA`).
- `CV4` — Pline with block at the end. You select the points where a polyline is added and at the end a block of your choice is placed. (menu ID `ID_CV4`).
- `DefZZTOPO` — Layer, Color, Ltype, coefficients, etc. are defined. which are initially suggested by the commands and are adapted for buildings topographic surveys. (menu ID `ID_DEFZZTOPO`).
- `DELPP` — Select a point anywhere on the screen and then the nearest Polyline vertex is removed. (menu ID `ID_DELPP`).
- `DMLL` — You define which blocks and based on which Attributes will the codes, for typing points, be defined . (menu ID `ID_DMLL`).
- `ID_EPARQ` — Select the Z by point (Z coordinate) or object (Elevation). (menu ID `ID_EPARQ`).
- `ID_EPARW` — The Z-point is calculated by linear interpolation based on the slope of two others you choose. (menu ID `ID_EPARW`).
- `ETT` — Alignment of texts along the X or Y axis. The texts selected for alignment are moved (by their base point) only by X or Y, depending on the desired axis. (menu ID `ID_ETT`).
- `GGX` — Line with same X at both ends. You select or enter or calculate the desired X and then draw lines with Y of the points you select and X the desired. (menu ID `ID_GRSX`).
- `GGY` — Line with same Y at both ends. You select or enter or calculate the desired Y and then draw lines with X of the points you select and Y the desired. (menu ID `ID_GRSY`).
- `GG1` — Select the desired Y and then for each point you select on the screen a vertical line is Result up to the desired Y. (menu ID `ID_GRY1`).
- `HKT` — You select a center point the closed area and Polyline is automatically Result with a type of building partial delineation line. (menu ID `ID_HKT`).
- `ITAX` — Import block or other objects into the Drawing from a coordinate file. (menu ID `ID_ITAX`).
- `KEGSA` — Calculation of greek EGSA scale factor by selecting a point on the screen. (menu ID `ID_KEGSA`).
- `KL` — Slope calculation between 2 points giving for each numeric value or selecting a number from the drawing (text or block) or selecting a point's Z coordinate. Once the slop… (menu ID `ID_KL`).
- `KNB` — You select 2 points and a grid is designed depending on the print scale. (menu ID `ID_KNB`).
- `KNBFT` — Choose a size coefficient for the texts that list the coordinates of the grid in case you want different from the default which is 1.000 (menu ID `ID_KNBFT`).
- `KNBK` — You select 2 points and the frame, the grid, and the steps of the grid are Result on all 4 sides as in the passages of the Land Registry. (menu ID `ID_KNBK`).
- `KNBS` — You select 2 points and draw the frame, the grid, the coordinates of the 4 vertices and the steps of the grid on all 4 sides. (menu ID `ID_KNBS`).
- `KNBT` — Select the points on the grid where you want the coordinates to be written. (menu ID `ID_KNBT`).
- `LAPL` — Line, pline or arc for Expropriation Limit. (menu ID `ID_LAPL`).
- `LBLE` — Line, pline or arc for Blue OT separator. (menu ID `ID_LBLE`).
- `LDAS` — Line, pline or arc for Forest Area boundary. (menu ID `ID_LDAS`).
- `LDOK` — Line, pline or arc for beam and overhead projections. (Beams, roof steps, ceiling-false ceiling limits, roof slope changes, roof holes ...) (menu ID `ID_LDOK`).
- `PGPS` — Pline General Urban Plan Limit. (menu ID `ID_LGPS`).
- `LOIK` — Line, pline or arc for Settlement Boundary. (menu ID `ID_LOIK`).
- `LOIK23` — Line, pline or arc for Settlement Boundary before 1923. (menu ID `ID_LOIK23`).
- `LPO` — Line, pline or arc for Pranus Foot. (menu ID `ID_LPO`).
- `LPRL` — Line, pline or arc for provided Beach boundary. (menu ID `ID_LPRL`).
- `LREM` — Line, pline or arc for Boundary Stream boundaries. (menu ID `ID_LREM`).
- `LXAD` — Line, pline or arc for Home Ownership Axis. (menu ID `ID_LXAD`).
- `LXID` — Line, pline or arc for Final Ownership Axis. (menu ID `ID_LXID`).
- `LXKATH` — Line, pline or arc for Vertically Owned Axis. (menu ID `ID_LXKATH`).
- `LXOMR` — Line, pline or arc for Boundary Limits. (menu ID `ID_LXOMR`).
- `LXPEA` — Initial property limits of urban plan — LXPEA / PXPEA (menu ID `ID_LXPEA`).
- `LXPET` — Final property limits of urban plan — LXPET / PXPET (menu ID `ID_LXPET`).
- `LZOE` — Line, pline or arc for ZOE Limit. (menu ID `ID_LZOE`).
- `MBL` — Insert blocks from a Library in a sizerelative to print range. You have the ability to type points, set a shift, and import coefficient. You can enrich the library with y… (menu ID `ID_MBL`).
- `MCC` — Duplicate Copy items you select through filters in places you can type. (menu ID `ID_MCC`).
- `MJL` — Arc creation with a choice of 3 points for which you can also enter block codes. (menu ID `ID_MJL`).
- `MK3` — Circle creation with a selection of 3 points which you can enter with block codes. (menu ID `ID_MK3`).
- `MKO` — You select 2 points (left and right Side) and based on these the views of the points (block) you select are recorded in a file. Each line of the file is in the format: CO… (menu ID `ID_MKO`).
- `MLL` — Draw line or arc on current layer. During the design you can construct points, type them, give a series of points and be informed about 3D points. (menu ID `ID_MLL`).
- `MOF` — Offset object to a point where you can also type. (menu ID `ID_MOF`).
- `MPL` — Draw polyline or arc on current layer. During the design you can construct points, type them, give a series of points and be informed about 3D points. (menu ID `ID_MPL`).
- `MR2` — Rectangle creation with a choice of 2 points which you can also enter with block codes. (menu ID `ID_MR2`).
- `MR3` — Rectangle creation with a selection of 3 points which you can enter with block codes. (menu ID `ID_MR3`).
- `MRS` — Square by 2 points for side — MRS (menu ID `ID_MRS`).
- `MSP` — Spline creation by selecting as many points as you can and typing with block codes. (menu ID `ID_MSP`).
- `MTM` — You select a point, direction and name and the symbol of the local Section is Result. (menu ID `ID_MTM`).
- `NNB` — Block indications with symbol. Options: 1. Reference Point 2. Side and Position of entry 3. Texts above and below the symbol with selection from library. (menu ID `ID_NNB`).
- `NNC` — You select the reference point of the indication, the beginning of the text entry, the paragraph is written and a circle is Result at the reference point and a line to th… (menu ID `ID_NNC`).
- `NND` — You select from 2 libraries the texts of each column and after giving the starting point the columns are Result aligned. (menu ID `ID_NND`).
- `NNG` — Specify the display position of the indicators (X to the right or left of the display area) and then the annotations are Result from the reference point to the limit (X).… (menu ID `ID_NNG`).
- `NNR` — Specify the display position of the indicators (X to the right or left of the display area) and then the indicators are Result from the reference point to the limit (X).… (menu ID `ID_NNR`).
- `NNT` — Arrow display (plain text) of many rows. Options: 1. Point and indication address 2. Text on the screen. (menu ID `ID_NNT`).
- `NNXY` — Enter the coordinates of each point (and the marking side) you select on the screen. (menu ID `ID_NNXY`).
- `ID_OFSLINS` — This command sets the "lines" to extend at the point where they join during Offset. (menu ID `ID_OFSLINS`).
- `ID_OFSPTS` — This command defines during Offset each point of the created object to be far from the original the distance you have given. (menu ID `ID_OFSPTS`).
- `OPSPAR` — Opens a form where you have options for repeating automatic window design by selecting only the center of the opening or 2 points next to the screen. (menu ID `ID_OPSPAR`).
- `PDTM` — Defined lines closed areas for later use of the ZDTM command. You can e.g. surround an entire area or set smaller individual enclosed areas to then apply triangulation by… (menu ID `ID_PDTM`).
- `PFR` — Slope crest polyline. The vertical lines are of alternating length (short - long). (menu ID `ID_PFR`).
- `PHKT` — Polyline is added with a type of building partial delineation line, at the points you give. (menu ID `ID_PHKT`).
- `PLCO` — Change the Line and Pline direction. It is usually used in cases where commands related to the starting point of objects will then be executed. (menu ID `ID_PLCO`).
- `PORP` — Line, pline or arc for Road Area Limit. Road sub-area. (menu ID `ID_PORP`).
- `pp` — Line perpendicular to object. You choose: a. The side on which the line will be Result, b. the point at which it will be Result vertivad and c. the desired length of the… (menu ID `ID_PP`).
- `PP1` — Slope-1. With vertical lines of constant length A. (menu ID `ID_PP1`).
- `PP2` — Slope-2. With vertical lines of constant length 0.5 * +. (menu ID `ID_PP2`).
- `PPERG` — Pline for GIS Area Limit. GPS sub-area. (menu ID `ID_PPERG`).
- `PPERZ` — Pline ZONE Area Limit. ZONE subarea. (menu ID `ID_PPERZ`).
- `PPXR` — Pline Limit of Usage. (menu ID `ID_PPXR`).
- `PSXD` — Line, pline or arc for City Plan Limit. (menu ID `ID_PSXD`).
- `Q1` — Select the object that splits them in two, and then any point on the screen whose projection on the object will be the cutting point. (menu ID `ID_Q1`).
- `rampa` — Arrow of Rampas. Select the beginning, intermediate points of change of direction and the end of the ramp. Result: Continuous Polyline for the intermediate points and sha… (menu ID `ID_RAMPA`).
- `RGOG` — Indications (plain text) for road and building lines. You select beginning, address, internal point O.T. and lawn width. There is the possibility to indicate the T.E. or… (menu ID `ID_RGOG`).
- `S2P` — Convert selected Splines to Polylines. Ability to configure point densification between Spline vertices. (menu ID `ID_S2P`).
- `SAA` — On-Off survey point heights — SAA (menu ID `ID_SAA`).
- `SCC` — On-Off point codes — SCC (menu ID `ID_SCC`).
- `SCO` — Change the SPline direction. It is usually used in cases where commands related to the starting point of objects will then be executed. (menu ID `ID_SCO`).
- `SDD` — The command reads the layers registered in one of the SDD1-SDD5 command files and if they are open it closes them or if they are closed it opens them. (menu ID `ID_SDD`).
- `SSA` — You select an imaginary straight line (with two points) on the screen and the altitudes are listed at the main contours that this imaginary line intersects. (menu ID `ID_SSA`).
- `SSAS` — You select points (individually or with an imaginary straight line) on any level and its altitude is automatically indicated. (menu ID `ID_SSAS`).
- `SSV` — Open and close the layers of points that are usually used to calculate triangles, for a view of the design with or without points. (menu ID `ID_SSV`).
- `T2FY` — Export selected texts from drawing (Text, Mtext, ArcText) to a file of your choice, where all text with same Y-coordinate appear on the same row. (menu ID `ID_T2FY`).
- `TOPOUNITS` — The units used in Topographic Plans are defined. Measures (decimal 4), Grad (decimal 4), angle measurement principle the Y axis and the angles are measured clockwise. (menu ID `ID_TOPOUNITS`).
- `TST` — Enter a level symbol that indicates the Y of the point you select. You can configure decimals, units, addition, subtraction, multiplier, etc. (menu ID `ID_TST`).
- `TSTGR` — For each point you select the level is displayed at a predetermined position to the right or left of the drawing area. A dotted line is still being Result up to the point… (menu ID `ID_TSTGR`).
- `TTD` — Select the center of the 3dface by picking a point and it is then deleted and removed from triangles database. (menu ID `ID_TTD`).
- `TTH` — The triangles are shaded depending on the slope they have: White = flat to Black = steep slope. You can also check for black areas (which means no triangles) with TTG com… (menu ID `ID_TTH`).
- `TTS` — Draw new points for the correct calculation of triangles (eg break-lines). G calculation tools are provided with the possibility of operations, selection of the same with… (menu ID `ID_TTS`).
- `TTXX` — You select prases on texts from floor plan xref (space uses, ...) and this is re-written in the Section or Elevation drawing on the same X coordinate but at any level you… (menu ID `ID_TTXXT`).
- `VLV` — Select 2 points and the final position for the 2 arrows. Result: Line at the 2 points and arrow block placed at each end. (menu ID `ID_VLV`).
- `VPV` — You select 2 points and a final position of the polyline with 2 arrows. (menu ID `ID_VPV`).
- `VV1` — Pline with small Arrow at the end. Select the points where Polyline is Result and at the end a small arrow block is placed. (menu ID `ID_VV1`).
- `VV2` — Pline with middle arrow at the end. Select the points where Polyline is Result and at the end a middle arrow block is placed. (menu ID `ID_VV2`).
- `VV3` — Pline with a big arrow at the end. Select the points where Polyline is Result and at the end a large arrow block is placed. (menu ID `ID_VV3`).
- `XDD` — The command reads the layers registered in one of the SDD1-SDD5 files they are included in current Xref then they close if they are open or opens them if they are closed. (menu ID `ID_XDD`).
- `zaa` — Calculate area of closed boundary by giving a center point and you can add its value to the drawing. You can set units, decimal places, prefix, and suffix of the result. (menu ID `ID_ZAA`).
- `zaas` — Calculate area by points and you can add its value to the Drawing. You can set the units, decimal places, prefix, and suffix of the result. (menu ID `ID_ZAAS`).
- `ZCGRST` — The selected Country is no longer valid. In any command that requires the Coordinate System to be specified you will be able to reselect Country and/or Zone. (menu ID `ID_ZCGRST`).
- `zcr` — Rotate objects around their base point. (menu ID `ID_ZCR`).
- `zcs` — Scale objects from their point of insertion. (menu ID `ID_ZCS`).
- `ZCT` — Select a cutting point on Line, Polyline, Arc etc. and then the side to be removed. (menu ID `ID_ZCT`).
- `ZCXRD` — If you want to change the Xref search paths in the drawing, you point it through a Windows window. (Note: Do not select a specific drawing, only the address.) (menu ID `ID_ZCXRD`).
- `ZDEXASF` — Indication of distances for collateral. In the 2nd point of each dimension a code is written and at the end you can add a table of distances. (menu ID `ID_ZDEXASF`).
- `ZDGT` — Dimensions (plain Text) with points selected by the user (menu ID `ID_ZDGT`).
- `ZDGTF` — Dimensions (plain Text) with points selected by the user and suggested multiplier each time. (menu ID `ID_ZDGTF`).
- `ZDPRR` — You select two points on the screen whose angle becomes the horizontal axis of the screen. Recommended for printing or for drawing with "Ortho" in oblique direction. (menu ID `ID_ZDPRR`).
- `ZDTE` — You select two points for the straight section and then the cross section is automatically Result. (menu ID `ID_ZDTE`).
- `ZDTM` — You select a point in the center of the closed area (or you choose a closed polyline) and the triangles within the closed area are automatically Result. You can have all… (menu ID `ID_ZDTM`).
- `ZDTMA` — You can freely select an area on the screen and automatically draw triangles. You can have all the design layers open because only the points are automatically selected.… (menu ID `ID_ZDTMA`).
- `ZDTMB` — You select Lines, Polylines and Splines that are slope change lines and then the triangles that are close to these lines are automatically reResult. There need to be poin… (menu ID `ID_ZDTMB`).
- `ZDTS` — Select the points in the area where triangulation will then be performed and specify which attribute of the blocks contains the altitude information. (menu ID `ID_ZDTMSTART`).
- `zdw` — Select the center of the corner and then its 2 ends. Then you choose to design the interior or the complementary corner. (menu ID `ID_ZDW`).
- `zdwa` — You choose 2 points between which the Azimuth is planned. (menu ID `ID_ZDWA`).
- `ZEX` — Select any point on the screen (not necessarily on an object) and up to this point the desired Lines, Polylines, Arcs etc. are extended. (menu ID `ID_ZEX`).
- `ZID` — You select a point inside a closed area or you select a polyline for which a label-mark is inserted on each vertex, sides and area are displayed as text. Also a table of… (menu ID `ID_ZID`).
- `ZIDS` — Select surface points for which a label-mark is inserted on each vertex, sides and area are displayed as text. Also a table of the vertices coordinates can be added. (menu ID `ID_ZIDS`).
- `ZIK` — You choose an interior point of a closed area or select a polyline of the building where label-marks are inserted on each vertex. (menu ID `ID_ZIK`).
- `ZIKS` — You select the building surface points where label-marks are inserted on each vertex. (menu ID `ID_ZIKS`).
- `ZIMAA` — You select the initial and final image and the objects to be transferred or copied based on the difference in position, size and rotation of the final with the original. (menu ID `ID_ZIMAA`).
- `ZLAY2PC` — Setting the colors and lweights of building elements so that they are distinguishable when drawing with a point cloud image as background. (menu ID `ID_ZLAY2PC`).
- `ZLL` — Line, pline or arc with line type selection. During the design you can build points, type them, give a series of points and be informed about 3D points. (menu ID `ID_ZLL`).
- `ZLLO` — Design of axial lines of properties boundaries (axis of final and Initial property and other boundaries). (menu ID `ID_ZLLO`).
- `ZLLP` — Line, pline or arc with a choice of line type for city lines or application of a road plan (Road Plan, Building, planned Arcades, Settlement boundary, Forest boundary, Ae… (menu ID `ID_ZLLP`).
- `ZMES` — Simultaneously execute the AutoCAD MEASURE command with nodes on multiple objects (Features: Select objects with filters, select point input distance , and select layer. (menu ID `ID_ZMES`).
- `ZMIR` — Mirror from base point — ZMIR (menu ID `ID_ZMIR`).
- `zmrs` — Average MOVE - ROTATE - SCALE objects by any pairs of points you select. (menu ID `ID_ZMRS`).
- `zpbl` — A table is created where columns display the contents of selected Attributes and the coordinates of the blocks you select. (menu ID `ID_ZPBL`).
- `ZPID` — A table is created in the columns of which the names and coordinates of the blocks are displayed for each property vertex you select. (menu ID `ID_ZPID`).
- `ZPIK` — A table is created in the columns of which the names and coordinates of the blocks are displayed for each building vertex you select. (menu ID `ID_ZPIK`).
- `ZPOT` — A table is added in the columns of which the names are displayed, the coordinates for each vertex of city block that you select on the screen. (menu ID `ID_ZPOT`).
- `ZPPOL` — A table is created in the columns of which the names, the coordinates and the altitude of the blocks are displayed for each Station you select. (menu ID `ID_ZPPOL`).
- `ZPRP` — A table is created in the columns of which the names, the coordinates and the height of the blocks are displayed for each Reper you select. (menu ID `ID_ZPRP`).
- `ZPTGE` — Points to Google Earth — ZPTGE (menu ID `ID_ZPTGE`).
- `ZPTR` — A table is added in the columns of which the names, coordinates, altitudes, the height and the type of pedestal of the blocks are displayed for each triangulation station… (menu ID `ID_ZPTR`).
- `ZR4` — Give a point for each side of the rectangle and a rectangle is drawn that includes these points. (menu ID `ID_ZR4`).
- `ZRR` — Selected objects are rotated around their base point at the desired angle. (menu ID `ID_ZRR`).
- `ZSKO` — Automatic elevation of staircase by 2 points (start and end) and the number of steps. (menu ID `ID_ZSKO`).
- `ZTIN` — Draw your own new triangles by selecting 3 points. It is enough to give a point near (not necessarily on the point) and the program will look for the nearest automaticall… (menu ID `ID_ZTIN`).
- `ZTITLOIE` — Enter details for survey system. (menu ID `ID_ZTITLOIE`).
- `ZTITLOIEXASF` — …command under development (menu ID `ID_ZTITLOIEXASF`).
- `ZTITLOIS` — Enter drawing Dependency System which is usually plaed in the upper left corner inside the grid (WGS84, Local etc). (menu ID `ID_ZTITLOIS`).
- `ZTITLOITOD` — You choose from a form to enter the Title, the building conditions and the other statements and notes of the topographic survey. (menu ID `ID_ZTITLOITOD`).
- `ID_ZTITLOITOPO` — A block is inserted that includes all the information needed for the titles, the memoranda, the building conditions and the notes when compiling any usual topographic sur… (menu ID `ID_ZTITLOITOPO`).
- `ZVPLK` — Set the rectangle of the new viewport in Layout, select its center in Model and provide display scale. You can also add the coordinates of the Center. (menu ID `ID_ZVPLK`).
- `ZVPMC` — Specify an area in Model that appears in Layout by viewport at the same coordinates. (menu ID `ID_ZVPMC`).
- `ZXAG` — Simple export of objects to a file where both the point of entry or the beginning and their content can be indicated. (menu ID `ID_ZXAG`).
- `zxb1` — Export attributes contents and coordinates by settings of type 1. (menu ID `ID_ZXB1`).
- `zxb2` — Export attributes contents and coordinates by settings of type 2. (menu ID `ID_ZXB2`).
- `zxb3` — Export attributes contents and coordinates by settings of type 3. (menu ID `ID_ZXB3`).
- `zxb4` — Export attributes contents and coordinates by settings of type 4. (menu ID `ID_ZXB4`).
- `zxbl` — Blocks are extracted in a file where each row contains the contents of selected attributes and the coordinates of the blocks you select. (menu ID `ID_ZXBL`).
- `ZXGPT` — Lines: Start and end points are exported. Pline: The peaks are extracted. Arc: The beginning and end points, the center and the midpoint are exported in the middle of the… (menu ID `ID_ZXGPT`).
- `ZXID` — Blocks for property vertices items are exported to a file where each row contains names and coordinates. (menu ID `ID_ZXID`).
- `ZXPOL` — Blocks for survey stations are exported to a file where each row contains the names, the coordinates and the altitude. (menu ID `ID_ZXPOL`).
- `ZXREP` — Blocks for Reper contents are exported to a file where each row contains the names, coordinates and altitude. (menu ID `ID_ZXRP`).
- `ZXTAX` — Survey points blocks contents are exported to a file where each row contains the names, coordinates and altitude. (menu ID `ID_ZXTAX`).
- `ZXTIN` — You select (via filters) the triangles whose vertex coordinates are exported to a file. Each raw of the file is Xa,Ya,Za,Xb,Yb,Zb,Xc,Yc,Zc.. You can use this file in cros… (menu ID `ID_ZXTIN`).
- `ZXTRI` — Triangulation stations blovks are exported to a file where each row contains the names, the coordinates, the altitude and the height and type of pedestal. (menu ID `ID_ZXTRI`).
- `zz0` — The three-dimensional points of objects are transferred to Z = 0.00 (menu ID `ID_ZZ0`).
- `ZZAPF` — Display distance from polyline beginning at selected points. (menu ID `ID_ZZAPF`).
- `ZZI` — Add property vertices with multiple naming capabilities when importing and designing on the screen (and exporting to file). (menu ID `ID_ZZI`).
- `ZZTRS1` — Search range for points will be set to 1.0 (for commands ZTIN, TTR, and TTD). (menu ID `ID_ZZTRS1`).
- `ZZTRS2` — Search range for points will be set to 0.5 (for commands ZTIN, TTR, and TTD). (menu ID `ID_ZZTRS2`).
- `ZZTRS3` — Search range for points will be set to 0.1 (for commands ZTIN, TTR, and TTD). (menu ID `ID_ZZTRS3`).
- `ZZTRS4` — Custom search range for points for commands ZTIN, TTR, and TTD. (menu ID `ID_ZZTRS4`).

### Terrain and earthworks (54 reference entries)

- `bsa` — Ladder arrow indication. You select the beginning, intermediate points of change of direction and the end of the ladder. Result: hidden Polyline for the intermediate poin… (menu ID `ID_BSA`).
- `IIJ` — When using the command for the first time: Select the triangles you want and the Equalities are temporarily calculated and Result. In each subsequent use of the command,… (menu ID `ID_IIJ`).
- `IIJK` — Quick temporary drawing of Isosceles with the Triangles you selected during the last use of the IIJ or IIJR. (menu ID `ID_IIJK`).
- `IIJR` — Recalculation of temporary contours new selection of triangles. (menu ID `ID_IIJR`).
- `IIV` — The layers of contours '' DTM_ISO-K '', '' DTM_ISO-B '', '' DTM_ISO-D '', '' DTM_ISO-Txt '', for view of the drawing with or without contours, open and close. (menu ID `ID_IIV`).
- `IP2S` — Leveling: The Polylines of the heights are smoothed and look like Splines while remaining Polylines. You can remove the smoothing with the IP2L command. (menu ID `ID_IP2S`).
- `LDOR` — Line, pline or arc for Floor Separator. Limit A '. T 'etc floors outside or inside the contour of the Ground Floor. (menu ID `ID_LDOR`).
- `PEAG` — Line, pline or arc for shaft or surface Pipeline trace. (menu ID `ID_LEAG`).
- `PSBL3` — Line, pline or arc for Triangle. See the line with the ZLL command. (menu ID `ID_LSBL3`).
- `PSBL4` — Line, pline or arc for an isosceles triangle. See the line with the ZLL command. (menu ID `ID_LSBL4`).
- `PDTM` — Defined lines closed areas for later use of the ZDTM command. You can e.g. surround an entire area or set smaller individual enclosed areas to then apply triangulation by… (menu ID `ID_PDTM`).
- `SSA` — You select an imaginary straight line (with two points) on the screen and the altitudes are listed at the main contours that this imaginary line intersects. (menu ID `ID_SSA`).
- `SSV` — Open and close the layers of points that are usually used to calculate triangles, for a view of the design with or without points. (menu ID `ID_SSV`).
- `TTB` — The triangles are moved behind other objects. (menu ID `ID_TTB`).
- `TTD` — Select the center of the 3dface by picking a point and it is then deleted and removed from triangles database. (menu ID `ID_TTD`).
- `TTF` — The triangles are projected in front of the other objects. (menu ID `ID_TTF`).
- `TTG` — The centers of the Triangles with small pink crosses appear temporarily. (menu ID `ID_TTG`).
- `TTGR` — The centers of the Triangles are calculated and renewed with as many changes as you have made and the centers of the Triangles with small pink crosses are temporarily dis… (menu ID `ID_TTGR`).
- `TTH` — The triangles are shaded depending on the slope they have: White = flat to Black = steep slope. You can also check for black areas (which means no triangles) with TTG com… (menu ID `ID_TTH`).
- `TTHR` — The shading is removed from the Triangles. (menu ID `ID_TTHR`).
- `TTKTR` — Area documentation by Heron triangles — TTKTR (menu ID `ID_TTKTR`).
- `TTNO` — The sides of the closed area where no triangles were Result during the last use of the ZDTM command are displayed in yellow. (menu ID `ID_TTNO`).
- `TTR` — Select the centers of two adjacent Triangles which are redesigned with a new diagonal between them. (menu ID `ID_TTR`).
- `TTS` — Draw new points for the correct calculation of triangles (eg break-lines). G calculation tools are provided with the possibility of operations, selection of the same with… (menu ID `ID_TTS`).
- `TTV` — Opens and closes the layers of triangles '' DTM_Triangles '' and '' DTM_Trig-No-Iso, for view of the design with or without triangles. (menu ID `ID_TTV`).
- `zaa` — Calculate area of closed boundary by giving a center point and you can add its value to the drawing. You can set units, decimal places, prefix, and suffix of the result. (menu ID `ID_ZAA`).
- `ZDT1` — The commands will draw triangles for drawing heights. These triangles are 3DFACES and "fit" in the "DTM_Triangles" layer. (menu ID `ID_ZDT1`).
- `ZDT2` — The commands will add exception triangles for no contours, but will participate in the cross sections (such as areas with concrete or asphalt). These triangles are 3DFASE… (menu ID `ID_ZDT2`).
- `ZDTE` — You select two points for the straight section and then the cross section is automatically Result. (menu ID `ID_ZDTE`).
- `ZDTEMULT` — You select existing lines and the cross-sections are automatically Result for each one. (menu ID `ID_ZDTEMULT`).
- `ZDTM` — You select a point in the center of the closed area (or you choose a closed polyline) and the triangles within the closed area are automatically Result. You can have all… (menu ID `ID_ZDTM`).
- `ZDTMA` — You can freely select an area on the screen and automatically draw triangles. You can have all the design layers open because only the points are automatically selected.… (menu ID `ID_ZDTMA`).
- `ZDTMB` — You select Lines, Polylines and Splines that are slope change lines and then the triangles that are close to these lines are automatically reResult. There need to be poin… (menu ID `ID_ZDTMB`).
- `ZDTMD` — This command will delete the triangles whose centers are contained in the polylines you choose (eg buildings, terraces, concrete areas, paving ..). It is recommended, bef… (menu ID `ID_ZDTMD`).
- `ID_ZDTMDPE` — Automatic creation of solid from the triangles you select on the screen and the depth you give by a number. Once Solid is created you can calculate the area and volume wi… (menu ID `ID_ZDTMDPE`).
- `ZDTMISO` — The contours are designed with the parameters you have defined in the temporary contour drawing commands or by selecting new triangles. (menu ID `ID_ZDTMISO`).
- `ZDTS` — Select the points in the area where triangulation will then be performed and specify which attribute of the blocks contains the altitude information. (menu ID `ID_ZDTMSTART`).
- `ZDTMSURF` — Automatic creation of surface from triangles you select on the screen. (menu ID `ID_ZDTMSURF`).
- `ZDTMV1` — Older sdbox command for automatically designing and analyzing solid excavations using surfaces. All you need to choose in the design are triangles-Up and triangles-Down. (menu ID `ID_ZDTMV1`).
- `ZDTMV2` — Older sdbox command for automated design and analysis of solid excavations using Solids. All you need to choose in the design are Triangles-Up and Triangles-Down. (menu ID `ID_ZDTMV2`).
- `ZDTMVOL` — Automatic design and analysis of solid excavations and earthworks. All you need to choose in the design are triangles before excavation and after. (menu ID `ID_ZDTMVOL`).
- `ZDTR` — Divide area into triangles — ZDTR (menu ID `ID_ZDTR`).
- `ZIDS` — Select surface points for which a label-mark is inserted on each vertex, sides and area are displayed as text. Also a table of the vertices coordinates can be added. (menu ID `ID_ZIDS`).
- `ZIKS` — You select the building surface points where label-marks are inserted on each vertex. (menu ID `ID_ZIKS`).
- `ZPTR` — A table is added in the columns of which the names, coordinates, altitudes, the height and the type of pedestal of the blocks are displayed for each triangulation station… (menu ID `ID_ZPTR`).
- `ZTIN` — Draw your own new triangles by selecting 3 points. It is enough to give a point near (not necessarily on the point) and the program will look for the nearest automaticall… (menu ID `ID_ZTIN`).
- `ZTITLOIE` — Enter details for survey system. (menu ID `ID_ZTITLOIE`).
- `ZTTDBL` — Execute the command of AutoCAD '' OVERKILL '', to delete any double triangles so that there is no problem in calculating contours or volume. (menu ID `ID_ZTTDBL`).
- `ZTTKK` — Look for vertical or zero Triangles that are Result with a blue line to check and delete-correct, so that there is no problem in calculating contours or volume. (menu ID `ID_ZTTKK`).
- `ZTTSD` — Each side of a triangle must belong to a maximum of two triangles. Look for sides that belong to more than two, and are Result with blue lines to check and delete-correct… (menu ID `ID_ZTTSD`).
- `ZXDDP` — Select as many Polylines as you want in the drawing and export them to a file: Text or Mecht inside it (in the adjacent layer itself), the surface (excluding the interior… (menu ID `ID_ZXDDP`).
- `ZXTIN` — You select (via filters) the triangles whose vertex coordinates are exported to a file. Each raw of the file is Xa,Ya,Za,Xb,Yb,Zb,Xc,Yc,Zc.. You can use this file in cros… (menu ID `ID_ZXTIN`).
- `ZXTRI` — Triangulation stations blovks are exported to a file where each row contains the names, the coordinates, the altitude and the height and type of pedestal. (menu ID `ID_ZXTRI`).
- `ZZTRS1` — Search range for points will be set to 1.0 (for commands ZTIN, TTR, and TTD). (menu ID `ID_ZZTRS1`).

### Layers, selection and general drawing (364 reference entries)

- `00` — The current layer of the drawing is set to '' 0 ''. (menu ID `ID_00`).
- `01` — Current Layer: PROP-BNDY — 01 (menu ID `ID_01`).
- `02` — Current Layer: WALL-SECT — 02 (menu ID `ID_02`).
- `03` — Current Layer: MISC — 03 (menu ID `ID_03`).
- `04` — Current Layer: SIDE-WALL — 04 (menu ID `ID_04`).
- `05` — Current Layer: BLDG — 05 (menu ID `ID_05`).
- `06` — Current Layer: FENC-WIRE — 06 (menu ID `ID_06`).
- `07` — Current Layer: TTLB-LEGN — 07 (menu ID `ID_07`).
- `ID_222K` — It is possible to add the design attribute (As-built, Architecture, etc.) to general layers (such as MISC, ANNO-DIMS, TTLB-LEGN, etc.). (menu ID `ID_222K`).
- `2R` — Copy items to a selected layer and / or move the originals to a layer with the original name and prefix or suffix of your choice. (menu ID `ID_2R`).
- `2RM` — Bulk copy objects to a selected layer and / or transfer the originals to a layer with the original name and prefix or suffix of your choice. (menu ID `ID_2RM`).
- `3DLL` — Update notification for 3D Points. When, in all the commands that contain this parameter, you select points whose Z is not 0.00 then you are informed if you wish. (menu ID `ID_3DLL`).
- `3letlayK` — Three (3) letters are automaticly added to each layer of floor plan as indicator of level. Example: If "1st_A-PROJECTIONS '' is the current layer and you chose to draw wa… (menu ID `ID_3LETLAYK`).
- `3letlayN` — Cancel adding the first 3 letter prefix to floor plan, section and elevation layers. (menu ID `ID_3LETLAYN`).
- `3letlayT` — Three (3) letters are automaticly added to each layer of section or elevation as indicator of drawing. Example: If "TAA_A-PROJECTIONS '' is the current layer and you chos… (menu ID `ID_3LETLAYT`).
- `ADA` — You select two numbers or distances or a combination of them and the percentage deviation (%) is automatically calculated. (menu ID `ID_ADA`).
- `ADDPP` — Select a point anywhere on screen and it is added between the nearest Polyline vertices. (menu ID `ID_ADDPP`).
- `ID_ANMON` — Yellow exclamation marks for dimensions are removed from the screen. (menu ID `ID_ANMON`).
- `ASD` — Architectural or other 1:1 scale symbols that are selected from library. You can enrich the library with your own blocks. (menu ID `ID_ASD`).
- `ASDA` — Insert 1:1 scale symbols. The selection is made from a windows window and you can choose any drawing to import. (menu ID `ID_ASDA`).
- `XDDA` — Change Xref using commands like XDD. (menu ID `ID_AXDD`).
- `BFF` — Repeated offset at a specified distance by selecting points within closed areas. (menu ID `ID_BFF`).
- `BFF2` — Repeatable duble offset at 2 defined distances with selection of points within closed areas. (menu ID `ID_BFF2`).
- `ID_BLPMODE` — Remove blips + (menu ID `ID_BLPMODE`).
- `bs` — Ladder arrow indication. You select the beginning, intermediate points of change of direction and the end of the ladder. Result: Circle at the beginning, Polyline for the… (menu ID `ID_BS`).
- `bsa` — Ladder arrow indication. You select the beginning, intermediate points of change of direction and the end of the ladder. Result: hidden Polyline for the intermediate poin… (menu ID `ID_BSA`).
- `BVC` — Add text that you can wrtie or select from existing block, text or xref. You can also set a fixed prefix or suffix to be added. You can set a multiplier and a decimal pos… (menu ID `ID_BVC`).
- `CCTST` — You select an area of the drawing and levels with incorrect altitude are indicated by a red circle. (menu ID `ID_CCTST`).
- `copy` — Model: Copy frame in to other positions (menu ID `ID_COPY`).
- `ctolay` — Copy selected items to an existing or new layer. (menu ID `ID_CTOLAY`).
- `CV4` — Pline with block at the end. You select the points where a polyline is added and at the end a block of your choice is placed. (menu ID `ID_CV4`).
- `DBVC` — Edit prefix, suffix, decimal places and size factor for final text and set options for blocks or attributes which participate during BVC command. (menu ID `ID_DBVC`).
- `D+D` — You select a route on the screen to calculate the total length. The route is temporarily planned on the screen. The final calculation also shows each individual distance. (menu ID `ID_DDD`).
- `DefScaddOp` — The default settings of the program concerning layer, Color, Ltype, coefficients, etc. are restored. proposed at the outset by the commands. (menu ID `ID_DEFSCADDOP`).
- `DefZZTOPO` — Layer, Color, Ltype, coefficients, etc. are defined. which are initially suggested by the commands and are adapted for buildings topographic surveys. (menu ID `ID_DEFZZTOPO`).
- `DELLFIL` — All LayerFilters in the Scheme are deleted. (menu ID `ID_DELLFIL`).
- `DELPP` — Select a point anywhere on the screen and then the nearest Polyline vertex is removed. (menu ID `ID_DELPP`).
- `ELET` — Indications (Leader with dot) for personal notes in the Drawing. Their layer must be closed during printing. (menu ID `ID_ELET`).
- `ID_EPARQ` — Select the Z by point (Z coordinate) or object (Elevation). (menu ID `ID_EPARQ`).
- `ETT` — Alignment of texts along the X or Y axis. The texts selected for alignment are moved (by their base point) only by X or Y, depending on the desired axis. (menu ID `ID_ETT`).
- `F2T` — You select a file which is inserted as text on the screen. (menu ID `ID_F2T`).
- `FFCHDIR` — Select the folder that contains the photos that will be opened with the DFF command. (menu ID `ID_FFCHDIR`).
- `GD` — Enter the desired length (delta) by a number or distance on screen and then select the objects that will be lengthened by this distance. (menu ID `ID_GD`).
- `GRPO` — You select through calculations or operations the desired Y (N) and then a line is Result with start and end of your choice. (menu ID `ID_GRPO`).
- `GGX` — Line with same X at both ends. You select or enter or calculate the desired X and then draw lines with Y of the points you select and X the desired. (menu ID `ID_GRSX`).
- `GGY` — Line with same Y at both ends. You select or enter or calculate the desired Y and then draw lines with X of the points you select and Y the desired. (menu ID `ID_GRSY`).
- `GG1` — Select the desired Y and then for each point you select on the screen a vertical line is Result up to the desired Y. (menu ID `ID_GRY1`).
- `GT` — Enter the desired length with a number or dimension on the screen and then select the objects that will reach this length. (menu ID `ID_GT`).
- `hgr` — Hatch an area that is covered with Grass. Select another with ZHH command. (menu ID `ID_HGR`).
- `hh0` — Solid Hatch Gray color 250. View this Hatch type or select another with the ZHI command. (menu ID `ID_HH0`).
- `hh1` — Solid Hatch Gray color 251. View this Hatch type or select another with the ZHI command. (menu ID `ID_HH1`).
- `hh2` — Solid Hatch Gray color 252. View this Hatch type or select another with the ZHI command. (menu ID `ID_HH2`).
- `hh3` — Solid Hatch Gray color 253. View this Hatch type or select another with the ZHI command. (menu ID `ID_HH3`).
- `hh4` — Solid Hatch Gray color 254. View this Hatch type or select another with the ZHI command. (menu ID `ID_HH4`).
- `hha` — Hatch for location in wider areas (delineation type). View this type of Hatch or select another with the ZHI command. (menu ID `ID_HHA`).
- `HHBLUE` — Solid Hatch Blue. Select another with ZHH command. (menu ID `ID_HHBLUE`).
- `hhd` — Hatch usually for Coverage (delineation type). View this type of Hatch or select another with the ZHI command. (menu ID `ID_HHD`).
- `hhg` — Solid hatch gray: For section of structural elements for floor plans and sections that usually do not separate bearings and columns from walls. See this type of Hatch or… (menu ID `ID_HHG`).
- `HHGREEN` — Solid Hatch Green. View this type of Hatch or select another with the ZHI command. (menu ID `ID_HHGREEN`).
- `hhh` — Bearing layout for floor plan, section, etc. (delineation type). See this type of Hatch or select another with the ZHI command. (menu ID `ID_HHH`).
- `hhp` — Hatch (soil type) for landscaped areas with low vegetation such as flower beds, garden, etc. View this type of Hatch or select another with the ZHI command. (menu ID `ID_HHP`).
- `HHRED` — Solid Hatch Red. See this type of Hatch or select another with the ZHI command. (menu ID `ID_HHRED`).
- `hht` — Hatch for differentiation of areas (dots). See this type of Hatch or select another with the ZHI command. (menu ID `ID_HHT`).
- `HHYEL` — Solid Hatch Yellow. See this type of Hatch or select another with the ZHI command. (menu ID `ID_HHYEL`).
- `hkar` — Hatch Karystos slabs. See this type of Hatch or select another with the ZHI command. (menu ID `ID_HKAR`).
- `HKT` — You select a center point the closed area and Polyline is automatically Result with a type of building partial delineation line. (menu ID `ID_HKT`).
- `hpel` — Hatch Chipped Stones. See this type of Hatch or select another with the ZHI command. (menu ID `ID_HPEL`).
- `hpl1` — Hatch Paving 1. View this type of Hatch or select another with the ZHI command. (menu ID `ID_HPL1`).
- `hpl2` — Hatch Paving 2. View this Hatch type or select another with the ZHI command. (menu ID `ID_HPL2`).
- `hpl3` — Hatch Pavement Slabs. View this type of Hatch or select another with the ZHI command. (menu ID `ID_HPL3`).
- `HPOES` — Hatch in an area with vegetation type Poes. View this type of Hatch or select another with the ZHI command. (menu ID `ID_HPOES`).
- `HTHAM` — Hatch an area with vegetation type Shrubs Plants etc. See this type of Hatch or select another with the ZHI command. (menu ID `ID_HTHAM`).
- `ID_II2P` — Compound of heights in polylines. This command is now integrated into ZDTMISO, and no longer needs to be executed. (menu ID `ID_II2P`).
- `IIJ` — When using the command for the first time: Select the triangles you want and the Equalities are temporarily calculated and Result. In each subsequent use of the command,… (menu ID `ID_IIJ`).
- `IIJK` — Quick temporary drawing of Isosceles with the Triangles you selected during the last use of the IIJ or IIJR. (menu ID `ID_IIJK`).
- `IIJR` — Recalculation of temporary contours new selection of triangles. (menu ID `ID_IIJR`).
- `IIV` — The layers of contours '' DTM_ISO-K '', '' DTM_ISO-B '', '' DTM_ISO-D '', '' DTM_ISO-Txt '', for view of the drawing with or without contours, open and close. (menu ID `ID_IIV`).
- `IP2L` — Level smoothing removal when they reappear as Polylines. You can normalize them again at any time with IP2S. (menu ID `ID_IP2L`).
- `IP2S` — Leveling: The Polylines of the heights are smoothed and look like Splines while remaining Polylines. You can remove the smoothing with the IP2L command. (menu ID `ID_IP2S`).
- `KEGSA` — Calculation of greek EGSA scale factor by selecting a point on the screen. (menu ID `ID_KEGSA`).
- `KL` — Slope calculation between 2 points giving for each numeric value or selecting a number from the drawing (text or block) or selecting a point's Z coordinate. Once the slop… (menu ID `ID_KL`).
- `KLAY` — The usual layers for floor plan design are imported. You will be asked to select floor's abbreviation with 3 letters, which is usefull if you use AutoCAD's LMAN command. (menu ID `ID_KLAY`).
- `KLH` — Opens the file with descriptions for the floor layers that are imported with KLAY command. (menu ID `ID_KLH`).
- `KN` — Add spaces between each digit of each word in a single sentence. Gradually increase or decrease length of a text that you select. (menu ID `ID_KN`).
- `KNB` — You select 2 points and a grid is designed depending on the print scale. (menu ID `ID_KNB`).
- `KNBK` — You select 2 points and the frame, the grid, and the steps of the grid are Result on all 4 sides as in the passages of the Land Registry. (menu ID `ID_KNBK`).
- `KNBS` — You select 2 points and draw the frame, the grid, the coordinates of the 4 vertices and the steps of the grid on all 4 sides. (menu ID `ID_KNBS`).
- `KNBT` — Select the points on the grid where you want the coordinates to be written. (menu ID `ID_KNBT`).
- `ktlman` — The standard layers of all levels of a high-rise building, the corresponding LMANs and the corresponding filters are imported. (menu ID `ID_KTLMAN`).
- `KTM` — You select position, direction and name of the section-mark and then line segments are Result at the ends, direction arrows and the name. (menu ID `ID_KTOMH`).
- `LLALL` — You select a layer and line color, type and thickness and it is set to be open in as many LMAN (layerstates) you choose. (menu ID `ID_LLALL`).
- `LLC` — Select an object on the screen and the color you want its layer to have. (menu ID `ID_LLC`).
- `LLOL` — Objects belonging to the layer you select flash as you move the mouse on the screen. (menu ID `ID_LLOL`).
- `LLW` — Change layer lweigth — LLW (menu ID `ID_LLW`).
- `MBLA` — Insert blocks in a sizerelative to print range. The selection is made from a Windows window and you can choose any drawing to import. (menu ID `ID_MBLA`).
- `MCC` — Duplicate Copy items you select through filters in places you can type. (menu ID `ID_MCC`).
- `MK3` — Circle creation with a selection of 3 points which you can enter with block codes. (menu ID `ID_MK3`).
- `MKO` — You select 2 points (left and right Side) and based on these the views of the points (block) you select are recorded in a file. Each line of the file is in the format: CO… (menu ID `ID_MKO`).
- `MLL` — Draw line or arc on current layer. During the design you can construct points, type them, give a series of points and be informed about 3D points. (menu ID `ID_MLL`).
- `MOF` — Offset object to a point where you can also type. (menu ID `ID_MOF`).
- `MPL` — Draw polyline or arc on current layer. During the design you can construct points, type them, give a series of points and be informed about 3D points. (menu ID `ID_MPL`).
- `MR3` — Rectangle creation with a selection of 3 points which you can enter with block codes. (menu ID `ID_MR3`).
- `MSP` — Spline creation by selecting as many points as you can and typing with block codes. (menu ID `ID_MSP`).
- `MTM` — You select a point, direction and name and the symbol of the local Section is Result. (menu ID `ID_MTM`).
- `NNB` — Block indications with symbol. Options: 1. Reference Point 2. Side and Position of entry 3. Texts above and below the symbol with selection from library. (menu ID `ID_NNB`).
- `NNC` — You select the reference point of the indication, the beginning of the text entry, the paragraph is written and a circle is Result at the reference point and a line to th… (menu ID `ID_NNC`).
- `NND` — You select from 2 libraries the texts of each column and after giving the starting point the columns are Result aligned. (menu ID `ID_NND`).
- `NNR` — Specify the display position of the indicators (X to the right or left of the display area) and then the indicators are Result from the reference point to the limit (X).… (menu ID `ID_NNR`).
- `NNXY` — Enter the coordinates of each point (and the marking side) you select on the screen. (menu ID `ID_NNXY`).
- `ID_OFSLINS` — This command sets the "lines" to extend at the point where they join during Offset. (menu ID `ID_OFSLINS`).
- `ID_OFSPTS` — This command defines during Offset each point of the created object to be far from the original the distance you have given. (menu ID `ID_OFSPTS`).
- `ohha` — Solid Hatch opening. View this type of Hatch or select another with the ZHI command. (menu ID `ID_OHHA`).
- `ohhtz` — Solid Hatch Glass. See this type of Hatch or select another with the ZHI command. (menu ID `ID_OHHTZ`).
- `OL` — Object offset with simultaneous layer change. (menu ID `ID_OL`).
- `olay` — The standard layer for Elevation plan is imported. When commanding, define the abbreviation in 3 letters and then the commands will be assigned to the existing layers. (menu ID `ID_OLAY`).
- `OLH` — Opens the file with descriptions for the Face layers imported with the OLAY command. (menu ID `ID_OLH`).
- `OPSPAR` — Opens a form where you have options for repeating automatic window design by selecting only the center of the opening or 2 points next to the screen. (menu ID `ID_OPSPAR`).
- `ID_OSF` — You select an Excel file and an error file is automatically created for Google Earth. (menu ID `ID_OSF`).
- `OSK` — Offset of objects based on calculation of length and number of widths. (menu ID `ID_OSK`).
- `OSKM` — Offset continuous based on calculation of length and number of backs. (menu ID `ID_OSKM`).
- `OSNDLG` — If you do not want Osnap NODE to select Texts, set the OSNAPNODELEGACY variable to 1. The command sets it automatically. (menu ID `ID_OSNDLG`).
- `P2A` — Convert Polyline to Curve Fit. The selected Polylines are redesigned with only arcs between the tops. They can be restored to their original form with the P2L command. (menu ID `ID_P2A`).
- `P2L` — Polyline redesign with straight sections. (menu ID `ID_P2L`).
- `P2S` — Convert Polyline to Spline Fit. The selected Polylines are smoothed with Splines between the tops. They can be restored to their original form with the P2L command. (menu ID `ID_P2S`).
- `PDD` — Double polyline hidden. Two parallel hidden lines at the desired distance from each other. (menu ID `ID_PDD`).
- `PDTM` — Defined lines closed areas for later use of the ZDTM command. You can e.g. surround an entire area or set smaller individual enclosed areas to then apply triangulation by… (menu ID `ID_PDTM`).
- `PFR` — Slope crest polyline. The vertical lines are of alternating length (short - long). (menu ID `ID_PFR`).
- `phklim` — Selecting the large side of A4 paper as shown on the screen calculates the print scale. (menu ID `ID_PHKLIM`).
- `PHKT` — Polyline is added with a type of building partial delineation line, at the points you give. (menu ID `ID_PHKT`).
- `PHLIST` — Opens a file containing the names of the photos entered in the Drawing depending on each layer. (menu ID `ID_PHLIST`).
- `PHP` — Hide the original Polylines and show only the smoothing results on those Polylines where the P2S command has been executed. (menu ID `ID_PHP`).
- `PLL` — Select through filters the objects to be joined into single Polylines. (menu ID `ID_PLL`).
- `PMD` — Line, pline or arc for Mantra. Concrete wall, brickwork or concrete block placed for demarcation of areas. The 2nd line is designed in another layer for reasons of easy m… (menu ID `ID_PMD`).
- `POP` — Notes-Indications (Leader with dot) in 2nd predefined layer. (menu ID `ID_POP`).
- `POPT` — Indications (Leader with a dot) for notes in the drawing concerning an on-site inspection or an important note to be resolved prior to delivery. They are printed in red o… (menu ID `ID_POPT`).
- `POV` — Notes-Indications (leader with arrow) in 2nd predefined layer. (menu ID `ID_POV`).
- `PSP` — Display the initial Polylines and the smoothing results on those Polylines where the P2S command is executed. (menu ID `ID_PSP`).
- `P+P` — Operations with Polyline type objects. The length of each Polyline takes place. Your numbers or distances can also be included. (menu ID `ID_PSYNP`).
- `PXR` — Pline for Drystone. The dry stone is Result in the desired width and 2 continuous lines on either side in another layer. When the dry stone is roughly made you can erase… (menu ID `ID_PXR`).
- `Q1` — Select the object that splits them in two, and then any point on the screen whose projection on the object will be the cutting point. (menu ID `ID_Q1`).
- `rampa` — Arrow of Rampas. Select the beginning, intermediate points of change of direction and the end of the ramp. Result: Continuous Polyline for the intermediate points and sha… (menu ID `ID_RAMPA`).
- `RGOG` — Indications (plain text) for road and building lines. You select beginning, address, internal point O.T. and lawn width. There is the possibility to indicate the T.E. or… (menu ID `ID_RGOG`).
- `S2P` — Convert selected Splines to Polylines. Ability to configure point densification between Spline vertices. (menu ID `ID_S2P`).
- `san` — Insert a label with automatic numbering for Open where you select on the screen or with calculations and operations width and precision. (menu ID `ID_SAN`).
- `sanp` — Insert label with automatic numbering for opening with sill where you select on the screen or with calculations and operations width, sill and rack. (menu ID `ID_SANP`).
- `sanps` — Insert label for opening with a sill where you select on the screen or with calculations and operations width, sill and lintel. (menu ID `ID_SANPS`).
- `sans` — Insert an Open panel where you select on the screen or with calculations and operations width and precision. (menu ID `ID_SANS`).
- `SDD` — The command reads the layers registered in one of the SDD1-SDD5 command files and if they are open it closes them or if they are closed it opens them. (menu ID `ID_SDD`).
- `SDD1` — Edit - 1 Define the layers that will open and close with the SDD command. (menu ID `ID_SDD1`).
- `SDD2` — Edit - 2 Define the layers that will open and close with the SDD command. (menu ID `ID_SDD2`).
- `SDD3` — Edit - 3 Define the layers that will open and close with the SDD command. (menu ID `ID_SDD3`).
- `SDD4` — Edit - 4 Define the layers that will open and close with the SDD command. (menu ID `ID_SDD4`).
- `SDD5` — Edit - 5 Define the layers that will open and close with the SDD command. (menu ID `ID_SDD5`).
- `SSA` — You select an imaginary straight line (with two points) on the screen and the altitudes are listed at the main contours that this imaginary line intersects. (menu ID `ID_SSA`).
- `SSAS` — You select points (individually or with an imaginary straight line) on any level and its altitude is automatically indicated. (menu ID `ID_SSAS`).
- `SSV` — Open and close the layers of points that are usually used to calculate triangles, for a view of the design with or without points. (menu ID `ID_SSV`).
- `T2F` — Export selected texts from drawing (Text, Mtext, ArcText) to a file of your choice. (menu ID `ID_T2F`).
- `T2FY` — Export selected texts from drawing (Text, Mtext, ArcText) to a file of your choice, where all text with same Y-coordinate appear on the same row. (menu ID `ID_T2FY`).
- `TCDS` — In case you are designing a new Title design or modifying an existing one then you can add fields by copying the codes from the form that opens. (menu ID `ID_TCDS`).
- `tlay` — The standard layers for section design are imported. (menu ID `ID_TLAY`).
- `TLH` — Opens the file with descriptions for a Section drawing's layers that are imported with the TLAY command. (menu ID `ID_TLH`).
- `TST` — Enter a level symbol that indicates the Y of the point you select. You can configure decimals, units, addition, subtraction, multiplier, etc. (menu ID `ID_TST`).
- `TSTGR` — For each point you select the level is displayed at a predetermined position to the right or left of the drawing area. A dotted line is still being Result up to the point… (menu ID `ID_TSTGR`).
- `tt0` — Delete objects like Text, Mtext, Arctext, Rtext without content. Text, Mtext, Rtext, and Arctext spaces are objects in the drawing that are not visible because their cont… (menu ID `ID_TT0`).
- `TTB` — The triangles are moved behind other objects. (menu ID `ID_TTB`).
- `TTD` — Select the center of the 3dface by picking a point and it is then deleted and removed from triangles database. (menu ID `ID_TTD`).
- `TTHR` — The shading is removed from the Triangles. (menu ID `ID_TTHR`).
- `TTR` — Select the centers of two adjacent Triangles which are redesigned with a new diagonal between them. (menu ID `ID_TTR`).
- `TTS` — Draw new points for the correct calculation of triangles (eg break-lines). G calculation tools are provided with the possibility of operations, selection of the same with… (menu ID `ID_TTS`).
- `TTT` — Edit text, mtext, arctext totally or individually. Convert chapters - small, add text right and left, translate utf8, find and replace, change height, Color, Style, layer… (menu ID `ID_TTT`).
- `TTV` — Opens and closes the layers of triangles '' DTM_Triangles '' and '' DTM_Trig-No-Iso, for view of the design with or without triangles. (menu ID `ID_TTV`).
- `ID_TTXX` — You select text from xref wich is re-entered in the current drawing on the same X but at any level (Y) you define. (menu ID `ID_TTXX`).
- `TTXX` — You select prases on texts from floor plan xref (space uses, ...) and this is re-written in the Section or Elevation drawing on the same X coordinate but at any level you… (menu ID `ID_TTXXT`).
- `VLV` — Select 2 points and the final position for the 2 arrows. Result: Line at the 2 points and arrow block placed at each end. (menu ID `ID_VLV`).
- `VLVT` — A line is added with arrows (at start and end) that concerns a dimension for on-site control or a significant difference that must be resolved before delivery. They are p… (menu ID `ID_VLVT`).
- `VPV` — You select 2 points and a final position of the polyline with 2 arrows. (menu ID `ID_VPV`).
- `VV0` — The viewports in Layout you select are set to have the angle you set. (menu ID `ID_VV0`).
- `VV1` — Pline with small Arrow at the end. Select the points where Polyline is Result and at the end a small arrow block is placed. (menu ID `ID_VV1`).
- `VV2` — Pline with middle arrow at the end. Select the points where Polyline is Result and at the end a middle arrow block is placed. (menu ID `ID_VV2`).
- `VV3` — Pline with a big arrow at the end. Select the points where Polyline is Result and at the end a large arrow block is placed. (menu ID `ID_VV3`).
- `XDD` — The command reads the layers registered in one of the SDD1-SDD5 files they are included in current Xref then they close if they are open or opens them if they are closed. (menu ID `ID_XDD`).
- `XDDA` — Change Xref tat is used by commands such as TTXX. (menu ID `ID_XDDA`).
- `XFCTL` — You set, with a number from 0 to 90, how dark the Xref you enter in the drawing will look. 0: Xref layers appear in their normal colors, 90: layer colors look very dark. (menu ID `ID_XFCTL`).
- `XKT` — Adding floor count indication by selection from form. (menu ID `ID_XKT`).
- `YYTT` — A form opens where you can select the text type (Notes, Small-Medium-Large Title, Small-Medium-Large Wide Title) to add in the drawing. (menu ID `ID_YYTT`).
- `ZBBXM` — All parts of selected blocks parts are moved to layer 0 and with color and linetype set to byblock. If original blocks contain other blocks those get exploded and moved a… (menu ID `ID_ZBBXM`).
- `ZBLK` — Opens a file that includes all blocks and xrefs in the drawing by counting them. (menu ID `ID_ZBLK`).
- `ZBLS` — Open a file of your choice that contains a Detailed List (Name, layer, Color, Scale, etc.) of the blocks you select. (menu ID `ID_ZBLS`).
- `zbor` — Insert north sign or arrow as block with a sizerelative to print scale and by selecting it from a library. (menu ID `ID_ZBOR`).
- `ZBORLIST` — Open file that contains a list with the names of the north signs and arrows that appear on the ZBOR command form. You can copy this list to the description file for modif… (menu ID `ID_ZBORLIST`).
- `zcc` — Repeatable copy of selected objects through filters. (menu ID `ID_ZCC`).
- `ZCCIM` — The images you select on screen are copied as files to an address of your choice. (menu ID `ID_ZCCIM`).
- `ZCCPH` — You select the labels (numbers) indicating photos in the drawing and those photos are automatically copied to an address of your choice. Search path for machin labels is… (menu ID `ID_ZCCPH`).
- `ZCCXR` — For any xrefs you select their original files are copied to a location of your choice. (Note: The command also works local network.) (menu ID `ID_ZCCXR`).
- `ZCDIM` — Red circles are added as result in those of the selected dimensions that do not have a true value but an edited one. (menu ID `ID_ZCDIM`).
- `ZCGRST` — The selected Country is no longer valid. In any command that requires the Coordinate System to be specified you will be able to reselect Country and/or Zone. (menu ID `ID_ZCGRST`).
- `ZCH` — Select objects through filters to which changes for Elevation, Color, Layer, Ltype, Ltscale, Ltweight, Thickness will be applied. (menu ID `ID_ZCH`).
- `zchhs` — Each of the hatches you select gets a new scale which is the result of multiplying the scale they had before by your own number. (menu ID `ID_ZCHHS`).
- `zchl` — Each of the items you select gets a new ltscale which is the result of multiplying the ltscale they had before by your own number. (menu ID `ID_ZCHL`).
- `zchw` — Each of the items you select gets a new Ltweight which is the result of multiplying the Ltweight they had before by your own number. (menu ID `ID_ZCHW`).
- `ZCIMD` — You select a new search address and for all the Images you select in the drawing and if they exist in the new address, they will be read from there. For those who are not… (menu ID `ID_ZCIMD`).
- `zcr` — Rotate objects around their base point. (menu ID `ID_ZCR`).
- `ZCRTD` — You choose a new search address and for the Rtexts (which read a file) you select in the drawing and they exist in the new address, they will be read from there on. For t… (menu ID `ID_ZCRTD`).
- `ZCT` — Select a cutting point on Line, Polyline, Arc etc. and then the side to be removed. (menu ID `ID_ZCT`).
- `ZCXRD` — If you want to change the Xref search paths in the drawing, you point it through a Windows window. (Note: Do not select a specific drawing, only the address.) (menu ID `ID_ZCXRD`).
- `zda` — Dimensioning (Aligned type of normal height of letters) with options: 1. Repeated Dimensioning 2. Selection of Objects 3. Continuous Dimensioning. (menu ID `ID_ZDA`).
- `zdam` — Dimensioning (Aligned type of lower letter height) with options: 1. Repeated Dimensioning 2. Selection of Objects 3. Continuous Dimensioning. (menu ID `ID_ZDAM`).
- `ZDARC` — Indication of dimension with the length of the selected arc. (menu ID `ID_ZDARC`).
- `ZDCS` — Center mark of selected arcs or circles. (menu ID `ID_ZDCS`).
- `ZDD2` — Select 2 items on the screen and then draw the dimensions between them at predefined distances. (menu ID `ID_ZDD2`).
- `ZDDAS` — Selection of Autocad Dimension type with possibilities of configuration of decimals, units, size, coefficients, etc. (menu ID `ID_ZDDAS`).
- `zddat` — Select Simple Text Dimension type with the ability to configure decimals, units, sizes, coefficients, etc. (menu ID `ID_ZDDAT`).
- `ZDDIAM` — Indication of selected arc or circle diameter. (menu ID `ID_ZDDIAM`).
- `ZDDIAMS` — Indication of diameters of selected arcs or circles. (menu ID `ID_ZDDIAMS`).
- `zdfa` — SCALE object at its actual size based on one length and it's true value. You measure or enter a distance and give its real value and then accordingly selected objects inc… (menu ID `ID_ZDFA`).
- `ZDFFC` — Opens (via Windows) the folder you have selected for "open photos" (menu ID `ID_ZDFFC`).
- `ZDFP` — Automatically create a snippet image: Select the images and other objects to be displayed in the snippet, select the print scale, north position and title, and create a s… (menu ID `ID_ZDFP`).
- `ZDGT` — Dimensions (plain Text) with points selected by the user (menu ID `ID_ZDGT`).
- `ZDGTF` — Dimensions (plain Text) with points selected by the user and suggested multiplier each time. (menu ID `ID_ZDGTF`).
- `ZDL` — Dimensioning (Linear type of normal height of letters) with options: 1. Repeated Dimensioning 2. Selection of Objects 3. Continuous Dimensioning. (menu ID `ID_ZDL`).
- `ZDLAYT` — Dimensions (plain Text) of all objects in the same layer (menu ID `ID_ZDLAYT`).
- `ZDLM` — Dimensioning (Linear type of lower letter height) with options: 1. Repeated Dimensioning 2. Selection of Objects 3. Continuous Dimensioning. (menu ID `ID_ZDLM`).
- `ZDPRR` — You select two points on the screen whose angle becomes the horizontal axis of the screen. Recommended for printing or for drawing with "Ortho" in oblique direction. (menu ID `ID_ZDPRR`).
- `ZDRAD` — Indication of the radius of a selected arc or circle. (menu ID `ID_ZDRAD`).
- `ZDRADS` — Indication of radii of selected arcs or circles. (menu ID `ID_ZDRADS`).
- `ZDST` — Automatic dimensioning (plain text) of all objects selected. (menu ID `ID_ZDST`).
- `ZDT1` — The commands will draw triangles for drawing heights. These triangles are 3DFACES and "fit" in the "DTM_Triangles" layer. (menu ID `ID_ZDT1`).
- `ZDT2` — The commands will add exception triangles for no contours, but will participate in the cross sections (such as areas with concrete or asphalt). These triangles are 3DFASE… (menu ID `ID_ZDT2`).
- `ZDTE` — You select two points for the straight section and then the cross section is automatically Result. (menu ID `ID_ZDTE`).
- `ZDTEMULT` — You select existing lines and the cross-sections are automatically Result for each one. (menu ID `ID_ZDTEMULT`).
- `ZDTM` — You select a point in the center of the closed area (or you choose a closed polyline) and the triangles within the closed area are automatically Result. You can have all… (menu ID `ID_ZDTM`).
- `ZDTMA` — You can freely select an area on the screen and automatically draw triangles. You can have all the design layers open because only the points are automatically selected.… (menu ID `ID_ZDTMA`).
- `ZDTMB` — You select Lines, Polylines and Splines that are slope change lines and then the triangles that are close to these lines are automatically reResult. There need to be poin… (menu ID `ID_ZDTMB`).
- `ZDTMD` — This command will delete the triangles whose centers are contained in the polylines you choose (eg buildings, terraces, concrete areas, paving ..). It is recommended, bef… (menu ID `ID_ZDTMD`).
- `ID_ZDTMDPE` — Automatic creation of solid from the triangles you select on the screen and the depth you give by a number. Once Solid is created you can calculate the area and volume wi… (menu ID `ID_ZDTMDPE`).
- `ZDTMISO` — The contours are designed with the parameters you have defined in the temporary contour drawing commands or by selecting new triangles. (menu ID `ID_ZDTMISO`).
- `ZDTS` — Select the points in the area where triangulation will then be performed and specify which attribute of the blocks contains the altitude information. (menu ID `ID_ZDTMSTART`).
- `ZDTMSURF` — Automatic creation of surface from triangles you select on the screen. (menu ID `ID_ZDTMSURF`).
- `zdw` — Select the center of the corner and then its 2 ends. Then you choose to design the interior or the complementary corner. (menu ID `ID_ZDW`).
- `zdws` — You select objects and draw the angle between them. (menu ID `ID_ZDWS`).
- `zee` — Remove objects from the drawing by selecting them through filters. (menu ID `ID_ZEE`).
- `ZENLLCK` — When you select items that are in a locked layer, the sdbox commands are executed normally (the layers are temporarily unlocked) and with this command you set whether you… (menu ID `ID_ZENLLCK`).
- `ZEX` — Select any point on the screen (not necessarily on an object) and up to this point the desired Lines, Polylines, Arcs etc. are extended. (menu ID `ID_ZEX`).
- `ZF` — Select through filters or on the screen the layers that will remain thawed while all the rest become freezed. (menu ID `ID_ZF`).
- `ZFF` — All layers that are freezed return to thaw mode. (menu ID `ID_ZFF`).
- `ZFG` — You select through filters or on the screen the layers that will remain in their colors while all the others are displayed in dark gray 251. (menu ID `ID_ZFG`).
- `ZFGG` — All layers return to the colors they had before executing the ZFG command. (menu ID `ID_ZFGG`).
- `ZFIM` — When the drawing has a large number of images then with this command you isolate or reappear some Images to lighten up the drawing. (menu ID `ID_ZFIM`).
- `ZFXR` — Unload and Reload Xref by selecting them on the drawing screen. (menu ID `ID_ZFXR`).
- `ZGRLS` — Open a file of your choice that contains a detailed List (Name, layer, Color, Scale, etc.) of the Lines (Linetypes) that you select. (menu ID `ID_ZGRLS`).
- `zhh` — Add Hatch to the drawing with selection from form. (menu ID `ID_ZHH`).
- `ZHHLS` — Open a file of your choice that contains a detailed List (Name, Layer, Color, Scale, etc.) of the hatches you select. (menu ID `ID_ZHHLS`).
- `ZID` — You select a point inside a closed area or you select a polyline for which a label-mark is inserted on each vertex, sides and area are displayed as text. Also a table of… (menu ID `ID_ZID`).
- `ZIDS` — Select surface points for which a label-mark is inserted on each vertex, sides and area are displayed as text. Also a table of the vertices coordinates can be added. (menu ID `ID_ZIDS`).
- `ZIK` — You choose an interior point of a closed area or select a polyline of the building where label-marks are inserted on each vertex. (menu ID `ID_ZIK`).
- `ZIKS` — You select the building surface points where label-marks are inserted on each vertex. (menu ID `ID_ZIKS`).
- `ZIMAA` — You select the initial and final image and the objects to be transferred or copied based on the difference in position, size and rotation of the final with the original. (menu ID `ID_ZIMAA`).
- `ZIMDD` — MOVE-ROTATE-SCALE objects with average calculation from a contnuous path that you specify on the screen and the actual value of each part. (menu ID `ID_ZIMDD`).
- `ZIMDETACH` — Detach selected images — ZIMDETACH (menu ID `ID_ZIMDETACH`).
- `ZIMGEO` — You select the image to insert in the drawing and a geo-reference file with the same name is automatically being searched. If found, the image is georeferenced when inser… (menu ID `ID_ZIMGEO`).
- `ZIMGS` — You select the image on the screen and a geo-reference file with the same name is automatically searched. If found, the image changes position, rotation and scale accordi… (menu ID `ID_ZIMGS`).
- `ZIMIN` — Select an image to insert and a layer by the name ''tiff_p_(image-name)'' is automatically generated. (menu ID `ID_ZIMIN`).
- `ZIMNM` — The name is automatically displayed on the screen for as many images as you select. The text (image file name) is displayed in the upper left corner of the image (in the… (menu ID `ID_ZIMNM`).
- `ZINSXREF` — Insert Floor plan Xref — ZINSXREF (menu ID `ID_ZINSXREF`).
- `ZKKFIL` — Add layer filters — ZKKFIL (menu ID `ID_ZKKFIL`).
- `zkkp` — A form opens where you can select the opening type for the panel to be inserted into the drawing with its details. You can configure decimals, coefficients, size, etc. (menu ID `ID_ZKKP`).
- `ZKMX` — Axial polyline design in the middle of two objects you select. (menu ID `ID_ZKMX`).
- `zkyk` — Insert block (data in a circle) with size relative to print scale and library selection. In the library you can also define descriptions for each block. (menu ID `ID_ZKYK`).
- `ZKYKLIST` — A file opens that contains a list with the block names in a circle that appear on the ZKYK command tab. You can copy this list to the description file for modification. (menu ID `ID_ZKYKLIST`).
- `ZLAYINS` — New layers are imported into the drawing from predefined files of your choice which you can change. (menu ID `ID_ZLAYINS`).
- `ZLAYINS1` — Edit - 1. Set the name, color and line type of the Layers you want to import when you have selected case 1. You can also specify them with the ZVFE command. (menu ID `ID_ZLAYINS1`).
- `ZLAYINS2` — Edit - 2. Define the name, color and line type of the layers you want to import when you have selected case 2. You can also specify them with the ZVFE command. (menu ID `ID_ZLAYINS2`).
- `ZLAYINS3` — Edit - 3. Set the name, color and line type of the layers you want to import when you have selected the case 3. You can also specify them with the ZVFE command. (menu ID `ID_ZLAYINS3`).
- `ZLAYINS4` — Edit - 4. Set the name, color and line type of the layers you want to import when you have selected the case 4. You can also specify them with the ZVFE command. (menu ID `ID_ZLAYINS4`).
- `zlaylist` — Opens a file with the names of drawing's layers. (menu ID `ID_ZLAYLIST`).
- `zlaylistp` — A file opens where the layers of the Drawing are displayed on each line in the format: layer '?' Color '?' Linetype. You can copy these items to the Edit ZLAYINS command… (menu ID `ID_ZLAYLISTP`).
- `zlayren` — Rename layers from a predefined List that you can modify, or by custom renaming. (menu ID `ID_ZLAYREN`).
- `ZLAYREN1` — Edit - 1 In each line of this file you specify for which layers you want to be renamed with the ZLAYREN command. (menu ID `ID_ZLAYREN1`).
- `ZLAYREN2` — Edit - 2 In each line of this file you specify for which layers you want to be renamed with the ZLAYREN command. (menu ID `ID_ZLAYREN2`).
- `ZLAYSEL` — Opens a file with the layer names of whatever objects you select. (menu ID `ID_ZLAYSEL`).
- `ZLAYSELP` — Detailed selected layers list (N C L) — ZLAYSELP (menu ID `ID_ZLAYSELP`).
- `ZLL` — Line, pline or arc with line type selection. During the design you can build points, type them, give a series of points and be informed about 3D points. (menu ID `ID_ZLL`).
- `ZLPT` — Select a drawing area that is copied and enlarged according to the print scale. (menu ID `ID_ZLPT`).
- `ZMES` — Simultaneously execute the AutoCAD MEASURE command with nodes on multiple objects (Features: Select objects with filters, select point input distance , and select layer. (menu ID `ID_ZMES`).
- `ZMKPOL` — Longitudinal section of 3Dpolyline — ZMKPOL (menu ID `ID_ZMKPOL`).
- `zmm` — Move selected, by filters, objects . (menu ID `ID_ZMM`).
- `zmrs` — Average MOVE - ROTATE - SCALE objects by any pairs of points you select. (menu ID `ID_ZMRS`).
- `ZMSB` — Select first the block that has the desired X, Y, Z Scale and then the blocks to get the same scales. (menu ID `ID_ZMSB`).
- `zmx` — The items you select move only by X. (menu ID `ID_ZMX`).
- `zmy` — The items you select move only by Y. (menu ID `ID_ZMY`).
- `ZNM` — Operations on texts that are numbers. You select the operation, the number and decimal places to be listed. You can select specific types of texts where the action will t… (menu ID `ID_ZNM`).
- `ZNMB` — Operations on attribute values that are numbers. You select the operation, the number and decimal places to be listed. You can select specific types of Attributes or bloc… (menu ID `ID_ZNMB`).
- `ZNMD` — Operations on dimension values that are numbers. You select the operation, the number and decimal places to be listed. You can select specific Dimension types where the a… (menu ID `ID_ZNMD`).
- `ZNN` — Select annotation command from a form with sizing options. (menu ID `ID_ZNN`).
- `ZONELAY` — The objects you select are transferred to an existing or new layer while maintaining their Color and Linetype. (menu ID `ID_ZONELAY`).
- `ZPASTE` — Paste objects from another drawing and rename them according to the 3 initial letters of this design. Then purge is executed for the layers of the imported objects. (menu ID `ID_ZPASTE`).
- `zpb1` — a list of selected blocks on the screen with options for Attributes and block Type 1 is planned. (menu ID `ID_ZPB1`).
- `zpb2` — a list of selected blocks on the screen with options for Attributes and block Type 2 is planned. (menu ID `ID_ZPB2`).
- `zpb3` — a list of selected blocks on the screen with options for Attributes and block Type 3 is planned. (menu ID `ID_ZPB3`).
- `zpb4` — a list of selected blocks on the screen with options for Attributes and block Type 4 is planned. (menu ID `ID_ZPB4`).
- `zpbl` — A table is created where columns display the contents of selected Attributes and the coordinates of the blocks you select. (menu ID `ID_ZPBL`).
- `ZPDFIN` — Insert pdf on layer with same name. The first time you run the command, the search address of the pdf file is defined as that of the drawing. (menu ID `ID_ZPDFIN`).
- `ZPFL` — You select a file and a column separator, and a table is created listing the contents of the file. (menu ID `ID_ZPFL`).
- `ZPID` — A table is created in the columns of which the names and coordinates of the blocks are displayed for each property vertex you select. (menu ID `ID_ZPID`).
- `ZPIK` — A table is created in the columns of which the names and coordinates of the blocks are displayed for each building vertex you select. (menu ID `ID_ZPIK`).
- `ZPLINEWID` — Define, by real number, the width for new polylines. This is the AutoCAD variable "PLINEWID". (menu ID `ID_ZPLINEWID`).
- `ZPLOTSTYLES` — The folder containing the sdbox * .ctb files (pens) will open. You can copy these files to the Autocad Plot Styles folder (Menu -&gt; File -&gt; Plot Style Manager). (menu ID `ID_ZPLOTSTYLES`).
- `ZPNGF` — Select the version of AutoCAD you wish and the corresponding sdbox fonts are copied so that the recipient reads the drawing correctly. (menu ID `ID_ZPNGF`).
- `ZPOT` — A table is added in the columns of which the names are displayed, the coordinates for each vertex of city block that you select on the screen. (menu ID `ID_ZPOT`).
- `ZPPOL` — A table is created in the columns of which the names, the coordinates and the altitude of the blocks are displayed for each Station you select. (menu ID `ID_ZPPOL`).
- `ZPRP` — A table is created in the columns of which the names, the coordinates and the height of the blocks are displayed for each Reper you select. (menu ID `ID_ZPRP`).
- `ZPTR` — A table is added in the columns of which the names, coordinates, altitudes, the height and the type of pedestal of the blocks are displayed for each triangulation station… (menu ID `ID_ZPTR`).
- `ZRPL` — You select through filters the objects that will be replaced with block of your choice on a predefined layer. (menu ID `ID_ZRPL`).
- `ZRPLR` — You select through the filters the objects that will be replaced with block of your choice on the layers where the original objects are designed. (menu ID `ID_ZRPLR`).
- `ZRR` — Selected objects are rotated around their base point at the desired angle. (menu ID `ID_ZRR`).
- `ZSCLR` — Select a screen background color from a form that opens. (menu ID `ID_ZSCLR`).
- `ZSFILE` — A form opens where the selected file is displayed and you can apply filters and export parts of the file. (menu ID `ID_ZSFILE`).
- `zst` — Enter level or height marks by type selection. You can also specify decimals, coefficients, etc. During command you can apply calculations or operations. (menu ID `ID_ZST`).
- `ZSTX` — Selected objects are aligned (moved) at an imaginary line or object of your choice. (menu ID `ID_ZSTX`).
- `ZSXEDIO` — By setting design type (asBuilt Architect Civil Electrical Facility Heating Interior Landscape Structural) an initial k-, A-, C-, H- etc. is added automatically in the co… (menu ID `ID_ZSXEDIO`).
- `ztet` — Insert block into a scale that isrelative to print scale and library selection. In the library you can also define descriptions for each block. (menu ID `ID_ZTET`).
- `ZTETLIST` — A file opens containing a list with block names on a table that appear on ZTET command form. You can copy this list to the description file for modification. (menu ID `ID_ZTETLIST`).
- `ZTIN` — Draw your own new triangles by selecting 3 points. It is enough to give a point near (not necessarily on the point) and the program will look for the nearest automaticall… (menu ID `ID_ZTIN`).
- `ZTITLOI` — Select the Title type to be inserted in the drawing. Then a Project database form opens where you can configure the fields for each project, export a list of drawings, et… (menu ID `ID_ZTITLOI`).
- `ZTITLOIT` — Select the Title box to insert into the drawing. Then a Project database opens where you can configure the fields for each project or, export a list of drawings, etc. (menu ID `ID_ZTITLOIT`).
- `ZTLS` — Open a file of your choice that contains a detailed List (Name, Layer, Color, Height, etc.) of the Texts (Text, Mtext, ArcText) that you select in the Design. (menu ID `ID_ZTLS`).
- `ZVFE` — Select or modify the description files, data files, and list files displayed on tabs for the commands that use them. (menu ID `ID_ZVFE`).
- `ZVPLK` — Set the rectangle of the new viewport in Layout, select its center in Model and provide display scale. You can also add the coordinates of the Center. (menu ID `ID_ZVPLK`).
- `ZVPLY` — Layout: viewport by selectin symbol — ZVPLY (menu ID `ID_ZVPLY`).
- `ZVV` — Recall the views of the drawing you have created with the ZVM command. (menu ID `ID_ZVV`).
- `ZWDXF` — Export part or all of the drawing to a DXF file (AutoAD version option) and additionally copy images, pens and fonts to the new drawing folder. (menu ID `ID_ZWDXF`).
- `zxbl` — Blocks are extracted in a file where each row contains the contents of selected attributes and the coordinates of the blocks you select. (menu ID `ID_ZXBL`).
- `ZXDDP` — Select as many Polylines as you want in the drawing and export them to a file: Text or Mecht inside it (in the adjacent layer itself), the surface (excluding the interior… (menu ID `ID_ZXDDP`).
- `ZXTIN` — You select (via filters) the triangles whose vertex coordinates are exported to a file. Each raw of the file is Xa,Ya,Za,Xb,Yb,Zb,Xc,Yc,Zc.. You can use this file in cros… (menu ID `ID_ZXTIN`).
- `ZYPBL` — A list is created on the screen (in the form of a memo) showing the different block types you have selected depending on block Name, Size, layer, Color, etc. and an descr… (menu ID `ID_ZYPBL`).
- `ZYPGR` — A list is created on the screen (in the form of a memo) where the different types of Lines you have selected depending on Linetype, Scale, layer, Color, etc. are displaye… (menu ID `ID_ZYPGR`).
- `ZYPHH` — A list is created on the screen (in the form of a memo) where the various types of Hatch that you have selected depending on the Type, Scale, Layer, Color, etc. are displ… (menu ID `ID_ZYPHH`).
- `ZYPLAY` — A list is created on the screen (in the form of a memo) where the layer elements in the Drawing are displayed. For each layer are displayed: the name, description, the ty… (menu ID `ID_ZYPLAY`).
- `ZYPLAY1` — Define - Open - Modify the 1st file of the descriptions that appear in the layer legend. (menu ID `ID_ZYPLAY1`).
- `ZYPLAY2` — Define - Open - Modify the 2nd file of the descriptions that appear in the layer legend. (menu ID `ID_ZYPLAY2`).
- `ZYPLAYS` — Layer legend of selected — ZYPLAYS (menu ID `ID_ZYPLAYS`).
- `ZYPTT` — A list is created on the screen (in the form of a memo) where the various types of Texts (Text, Mtext and Rtext) are displayed depending on the TextStyle, size, layer, Co… (menu ID `ID_ZYPTT`).
- `ZZ` — You select any AutoCAD object and a second similar one is drawn with same properties. (menu ID `ID_ZZ`).
- `zz0` — The three-dimensional points of objects are transferred to Z = 0.00 (menu ID `ID_ZZ0`).
- `ZZAPF` — Display distance from polyline beginning at selected points. (menu ID `ID_ZZAPF`).
- `ZZATT` — Edit attributes contents. Convert to capital letters or small, add phrases at the beginning or end, change phrases, change color, layer, or textStyle (menu ID `ID_ZZATT`).
- `ZZCHR` — Display all selected TextStyle characters corresponding to grsdtopo1.shx and enter the number of each character. To enter a character: Alt + 0 + number. (menu ID `ID_ZZCHR`).
- `ZZCLF` — Enter to a file that opens automatically the layers you want to include in a new layer Filter that you specify. (menu ID `ID_ZZCLF`).
- `zzdd` — You select width and height and the name of the beam and then these are displayed on the screen. (menu ID `ID_ZZDD`).
- `zzdk` — Select the basic dimensions and column name and then these are displayed in 2 lines of Text on the screen. (menu ID `ID_ZZDK`).
- `ZZLF` — Layer Filters are imported in the drawing: '' KT '' '' OFF '' '' Oria '' '' 'Shmeia' '' '' Tiff '' '' 'Stathmes' '' '' Freezed '' (menu ID `ID_ZZFL`).
- `zzInsPropScadD` — Load settings for Layer, Color, Ltype, factors, etc. suggested at the beginning of the commands, from a previously created file. (menu ID `ID_ZZINSPROPSCADD`).
- `zzlayemanClas` — Layer Manager Classic (menu ID `ID_ZZLAYEMANCLAS`).
- `zzlayemanDyn` — Layer Manager Dynamic (menu ID `ID_ZZLAYEMANDYN`).
- `ZZPDF` — Automatic printing to PDF. You only select the area and all the rest is done by sdbox. (menu ID `ID_ZZPDF`).
- `zzs` — Select obects and zoom to each one for view or edit. (menu ID `ID_ZZS`).
- `zzsa` — Select objects by sdbox filters and change their properties or execute any AutoCAD command. (menu ID `ID_ZZSA`).
- `zzSavePropScadD` — The settings for Layer, Color, Ltype, coefficients, etc. suggested by sdbox are saved in a file from which they can be uploaded to another computer. (menu ID `ID_ZZSAVEPROPSCADD`).
- `ZZSDBXLR` — The existing layers of the design such as e.g. ''LV1_WALLS'' are renamed to ''LV1_k_WALLS''. (menu ID `ID_ZZSDBXLR`).
- `ZZSKF` — Select by center and radius — ZZSKF (menu ID `ID_ZZSKF`).
- `zzsp` — Continue the ZZS command if you have interrupted it. (menu ID `ID_ZZSP`).
- `zzss` — Select all objects that participated in the last use of the ZZS command. (menu ID `ID_ZZSS`).
- `ID_ZZSTARTP` — Remove Start label (menu ID `ID_ZZSTARTP`).
- `ZZXTH` — Add position marks at specific intervals on polylines. (menu ID `ID_ZZXTH`).

### Floor plans, sections and elevations (116 reference entries)

- `02` — Current Layer: WALL-SECT — 02 (menu ID `ID_02`).
- `04` — Current Layer: SIDE-WALL — 04 (menu ID `ID_04`).
- `ID_3LETCLEARLIST` — Clear floor indicator prefix list (menu ID `ID_3LETCLEARLIST`).
- `3letlayK` — Three (3) letters are automaticly added to each layer of floor plan as indicator of level. Example: If "1st_A-PROJECTIONS '' is the current layer and you chose to draw wa… (menu ID `ID_3LETLAYK`).
- `3letlayN` — Cancel adding the first 3 letter prefix to floor plan, section and elevation layers. (menu ID `ID_3LETLAYN`).
- `3letlayT` — Three (3) letters are automaticly added to each layer of section or elevation as indicator of drawing. Example: If "TAA_A-PROJECTIONS '' is the current layer and you chos… (menu ID `ID_3LETLAYT`).
- `50100Scale` — Default settings of SDBOX are set so that level symbols and indicators for scales from 1: 1 to 1: 100 are inserted "larger" to be able to printed also on larger scales. B… (menu ID `ID_50100SCALE`).
- `ASDA` — Insert 1:1 scale symbols. The selection is made from a windows window and you can choose any drawing to import. (menu ID `ID_ASDA`).
- `ASD` — Importing 1:1 scale symbols from library like People, Cars, Shrubs, Trees, Door Frames, Wall Lights, Lighting Columns, Roof Elements. (menu ID `ID_ASDT`).
- `bs` — Ladder arrow indication. You select the beginning, intermediate points of change of direction and the end of the ladder. Result: Circle at the beginning, Polyline for the… (menu ID `ID_BS`).
- `bsa` — Ladder arrow indication. You select the beginning, intermediate points of change of direction and the end of the ladder. Result: hidden Polyline for the intermediate poin… (menu ID `ID_BSA`).
- `BVC` — Add text that you can wrtie or select from existing block, text or xref. You can also set a fixed prefix or suffix to be added. You can set a multiplier and a decimal pos… (menu ID `ID_BVC`).
- `CCTST` — You select an area of the drawing and levels with incorrect altitude are indicated by a red circle. (menu ID `ID_CCTST`).
- `DFF` — You enter the number of the photo that opens through Windows. (menu ID `ID_DFF`).
- `ID_EPARQ` — Select the Z by point (Z coordinate) or object (Elevation). (menu ID `ID_EPARQ`).
- `EPEXCSTM` — Instructions and opening the file where you can modify your own Custom Linetypes. (menu ID `ID_EPEXCSTM`).
- `GRPO` — You select through calculations or operations the desired Y (N) and then a line is Result with start and end of your choice. (menu ID `ID_GRPO`).
- `hhg` — Solid hatch gray: For section of structural elements for floor plans and sections that usually do not separate bearings and columns from walls. See this type of Hatch or… (menu ID `ID_HHG`).
- `hhh` — Bearing layout for floor plan, section, etc. (delineation type). See this type of Hatch or select another with the ZHI command. (menu ID `ID_HHH`).
- `IP2L` — Level smoothing removal when they reappear as Polylines. You can normalize them again at any time with IP2S. (menu ID `ID_IP2L`).
- `IP2S` — Leveling: The Polylines of the heights are smoothed and look like Splines while remaining Polylines. You can remove the smoothing with the IP2L command. (menu ID `ID_IP2S`).
- `ktm` — Section guidelines — KTM (menu ID `ID_KATTOMI`).
- `KLAY` — The usual layers for floor plan design are imported. You will be asked to select floor's abbreviation with 3 letters, which is usefull if you use AutoCAD's LMAN command. (menu ID `ID_KLAY`).
- `KLH` — Opens the file with descriptions for the floor layers that are imported with KLAY command. (menu ID `ID_KLH`).
- `ktlman` — The standard layers of all levels of a high-rise building, the corresponding LMANs and the corresponding filters are imported. (menu ID `ID_KTLMAN`).
- `KTM` — You select position, direction and name of the section-mark and then line segments are Result at the ends, direction arrows and the name. (menu ID `ID_KTOMH`).
- `LANB` — Line, pline or arc for Upgrades. (floor steps, concrete pavement boundaries, level changes ...) (menu ID `ID_LANB`).
- `LDAP` — Line, pline or arc for floor covering section. (menu ID `ID_LDAP`).
- `LDOR` — Line, pline or arc for Floor Separator. Limit A '. T 'etc floors outside or inside the contour of the Ground Floor. (menu ID `ID_LDOR`).
- `LEOR` — Line, pline or arc for roof cladding section. (menu ID `ID_LEOR`).
- `LFER` — Line, pline or arc for Bearing Section (Columns-Walls) (menu ID `ID_LFER`).
- `LFK` — Line, pline or arc for hidden bearing elements in section (not visible due to other elements in the first level) or bearing elements whose position is assumed (menu ID `ID_LFK`).
- `LTK` — Line, pline or arc for Walls in their possible position. (menu ID `ID_LFT`).
- `LKOYF` — Line, pline or arc for Boundaries and details of Frames. (menu ID `ID_LKOYF`).
- `LOK` — Line, pline or arc for Hidden Face Elements. (Key elements behind the level of the face to be seen with hidden). (menu ID `ID_LOK`).
- `LOK2` — Line, pline or arc for Hidden Facing in 2nd distance. (Secondary elements behind the level of the face to be seen with hidden). (menu ID `ID_LOK2`).
- `LPI` — Line, pline or arc for Swimming Pools - Tanks. Limits of floor hole or cover construction. (menu ID `ID_LPI`).
- `PPOLEN` — Pline for Urban Unity - Neighborhood. (menu ID `ID_LPOLEN`).
- `LPSE` — Line, pline or arc for Suspended ceilings section. (menu ID `ID_LPSE`).
- `LSK` — Line, pline or arc for Stairs-Stairs. (menu ID `ID_LSK`).
- `LSKAL` — Line, pline or arc for Stairs. (Stair limits, steps, ...) (menu ID `ID_LSKAL`).
- `LTAL` — Line, pline or arc for aluminum parititions. (menu ID `ID_LTAL`).
- `LTDD` — Line, pline or arc for sections of no structural elements (no columns or walls etc) or sections of secondary elements. (menu ID `ID_LTDD`).
- `LTDK` — Line, pline or arc for hidden structural elements tha are behind others or their place is estmated. (menu ID `ID_LTDK`).
- `LTDM` — Line, pline or arc for section of all structural elements. Note: It is suggested to use tihs command if bearing struction and walls section are not seperated. (menu ID `ID_LTDM`).
- `LTEP` — Line, pline or arc for Wall Lining Section. (menu ID `ID_LTEP`).
- `ltex` — Line, pline or arc for Technical Project. Walls - supporting structures, gutters, pipes ... (menu ID `ID_LTEX`).
- `LTK` — Line, pline or arc for concealed hidden walls (not visible due to other elements in the first level) or walls whose location is assumed. (menu ID `ID_LTK`).
- `LTOIX` — Line, pline or arc for Wall Section (Brickwork, plasterboard ...) (menu ID `ID_LTOIX`).
- `LTT` — Line, pline or arc with Telitses line. (Items that do not belong to another category such as floor marks. (menu ID `ID_LTT`).
- `LUP` — Line, pline or arc for Elevation elements. (boundaries of entrance canopies, canopies under which there is an imprint, pergolas, etc. (menu ID `ID_LUP`).
- `MBLA` — Insert blocks in a sizerelative to print range. The selection is made from a Windows window and you can choose any drawing to import. (menu ID `ID_MBLA`).
- `MTM` — Local sections — MTM (menu ID `ID_MIKRITOMI`).
- `MKO` — You select 2 points (left and right Side) and based on these the views of the points (block) you select are recorded in a file. Each line of the file is in the format: CO… (menu ID `ID_MKO`).
- `MTM` — You select a point, direction and name and the symbol of the local Section is Result. (menu ID `ID_MTM`).
- `NNH` — Height indicator block for overhead projections with possibilities of calculations and operations. (menu ID `ID_NNH`).
- `NNR` — Specify the display position of the indicators (X to the right or left of the display area) and then the indicators are Result from the reference point to the limit (X).… (menu ID `ID_NNR`).
- `ohha` — Solid Hatch opening. View this type of Hatch or select another with the ZHI command. (menu ID `ID_OHHA`).
- `olay` — The standard layer for Elevation plan is imported. When commanding, define the abbreviation in 3 letters and then the commands will be assigned to the existing layers. (menu ID `ID_OLAY`).
- `OPSPAR` — Opens a form where you have options for repeating automatic window design by selecting only the center of the opening or 2 points next to the screen. (menu ID `ID_OPSPAR`).
- `OSK` — Offset of objects based on calculation of length and number of widths. (menu ID `ID_OSK`).
- `OSKM` — Offset continuous based on calculation of length and number of backs. (menu ID `ID_OSKM`).
- `P2L` — Polyline redesign with straight sections. (menu ID `ID_P2L`).
- `parath` — Design of a typical window indication in floor plan (single, double, with internal or external shutter, superimposed or single with many partitions). (menu ID `ID_PARATH`).
- `PMD` — Line, pline or arc for Mantra. Concrete wall, brickwork or concrete block placed for demarcation of areas. The 2nd line is designed in another layer for reasons of easy m… (menu ID `ID_PMD`).
- `PMDD` — Line, pline or arc for Mantra with the 2nd Intermittent. The hidden line refers to the case where the ground level coincides with the crown level of the paddock. (menu ID `ID_PMDD`).
- `porta` — Design of a typical Door sign in plan view (plain without window, with 5x5 frame, with frame the entire thickness of the wall). (menu ID `ID_PORTA`).
- `PXR` — Pline for Drystone. The dry stone is Result in the desired width and 2 continuous lines on either side in another layer. When the dry stone is roughly made you can erase… (menu ID `ID_PXR`).
- `san` — Insert a label with automatic numbering for Open where you select on the screen or with calculations and operations width and precision. (menu ID `ID_SAN`).
- `sanp` — Insert label with automatic numbering for opening with sill where you select on the screen or with calculations and operations width, sill and rack. (menu ID `ID_SANP`).
- `sanps` — Insert label for opening with a sill where you select on the screen or with calculations and operations width, sill and lintel. (menu ID `ID_SANPS`).
- `sans` — Insert an Open panel where you select on the screen or with calculations and operations width and precision. (menu ID `ID_SANS`).
- `spar` — Insert label with automatic numbering for Window and also width, sill and lintel that you define by calculations and operations . (menu ID `ID_SPAR`).
- `spars` — Insert label of window's width, sill and lintel that you provide bycalculations and operations. (menu ID `ID_SPARS`).
- `spart` — Insert label with automatic numbering and type of Window and also width, sill and lintel that you provide by calculations and operations . (menu ID `ID_SPARTYP`).
- `spo` — Insert label with automatic numbering for door and also width and lintel that you provide by calculations and operations . (menu ID `ID_SPO`).
- `spos` — Insert label for door inclding width and lintel that you provide by calculations and operations . (menu ID `ID_SPOS`).
- `sport` — Insert label with automatic numbering and for door and also width and lintel that you provide by calculations and operations . (menu ID `ID_SPOTYP`).
- `SSA` — You select an imaginary straight line (with two points) on the screen and the altitudes are listed at the main contours that this imaginary line intersects. (menu ID `ID_SSA`).
- `SSAS` — You select points (individually or with an imaginary straight line) on any level and its altitude is automatically indicated. (menu ID `ID_SSAS`).
- `tlay` — The standard layers for section design are imported. (menu ID `ID_TLAY`).
- `TLH` — Opens the file with descriptions for a Section drawing's layers that are imported with the TLAY command. (menu ID `ID_TLH`).
- `ts` — The line that ''cuts'' the ladder at the level of the floor plan is Result and instructions are given for the projection of it from below the ladder or the ladder to the… (menu ID `ID_TS`).
- `TST` — Enter a level symbol that indicates the Y of the point you select. You can configure decimals, units, addition, subtraction, multiplier, etc. (menu ID `ID_TST`).
- `TSTGR` — For each point you select the level is displayed at a predetermined position to the right or left of the drawing area. A dotted line is still being Result up to the point… (menu ID `ID_TSTGR`).
- `ID_TTXX` — You select text from xref wich is re-entered in the current drawing on the same X but at any level (Y) you define. (menu ID `ID_TTXX`).
- `TTXX` — You select prases on texts from floor plan xref (space uses, ...) and this is re-written in the Section or Elevation drawing on the same X coordinate but at any level you… (menu ID `ID_TTXXT`).
- `XKT` — Adding floor count indication by selection from form. (menu ID `ID_XKT`).
- `YPPP` — For the openings in which you have Result a panel with the SPARTYP or SPOTYP commands you can add a memo to the drawing with predefined descriptions for the type of openi… (menu ID `ID_YPPP`).
- `YYTT` — A form opens where you can select the text type (Notes, Small-Medium-Large Title, Small-Medium-Large Wide Title) to add in the drawing. (menu ID `ID_YYTT`).
- `ZCH` — Select objects through filters to which changes for Elevation, Color, Layer, Ltype, Ltscale, Ltweight, Thickness will be applied. (menu ID `ID_ZCH`).
- `ZCXRD` — If you want to change the Xref search paths in the drawing, you point it through a Windows window. (Note: Do not select a specific drawing, only the address.) (menu ID `ID_ZCXRD`).
- `ZDDG` — Automate dimensions between objects intersected by an imaginary line of your choice. (menu ID `ID_ZDDG`).
- `ZDFFC` — Opens (via Windows) the folder you have selected for "open photos" (menu ID `ID_ZDFFC`).
- `ZDRC` — Opens (via Windows) the folder in which the current drawing is located. (menu ID `ID_ZDRC`).
- `ZDT2` — The commands will add exception triangles for no contours, but will participate in the cross sections (such as areas with concrete or asphalt). These triangles are 3DFASE… (menu ID `ID_ZDT2`).
- `ZDTE` — You select two points for the straight section and then the cross section is automatically Result. (menu ID `ID_ZDTE`).
- `ZDTEMULT` — You select existing lines and the cross-sections are automatically Result for each one. (menu ID `ID_ZDTEMULT`).
- `ZINSXREF` — Insert Floor plan Xref — ZINSXREF (menu ID `ID_ZINSXREF`).
- `zkkp` — A form opens where you can select the opening type for the panel to be inserted into the drawing with its details. You can configure decimals, coefficients, size, etc. (menu ID `ID_ZKKP`).
- `ZLAY2NORM` — Colors for Plan, Elevation or Section printing are set. (menu ID `ID_ZLAY2NORM`).
- `ZMKPOL` — Longitudinal section of 3Dpolyline — ZMKPOL (menu ID `ID_ZMKPOL`).
- `ZMKTOM` — Longitudinal section on 3d faces — ZMKTOM (menu ID `ID_ZMKTOM`).
- `ZNMB` — Operations on attribute values that are numbers. You select the operation, the number and decimal places to be listed. You can select specific types of Attributes or bloc… (menu ID `ID_ZNMB`).
- `ZPARPOLIST` — Opens a file containing the types of openings (for SPARTYP or SPOTYP commands) contained in the drawing. (menu ID `ID_ZPARPOLIST`).
- `ZSKO` — Automatic elevation of staircase by 2 points (start and end) and the number of steps. (menu ID `ID_ZSKO`).
- `zst` — Enter level or height marks by type selection. You can also specify decimals, coefficients, etc. During command you can apply calculations or operations. (menu ID `ID_ZST`).
- `ZST0` — Enter the elevation starting mark with ZST command. (menu ID `ID_ZST0`).
- `zsta` — Simple improt of level or height block. (menu ID `ID_ZSTA`).
- `ZSTK` — Use the ZST command with the option "zSt38 Level with note". (menu ID `ID_ZSTK`).
- `ZSTLIST` — Opens a file with level or height block names for ZST and ZSTA commands folder. (menu ID `ID_ZSTLIST`).
- `ZTTOM` — Cross section on 3dfaces — ZTTOM (menu ID `ID_ZTTOM`).
- `ZTTOMML` — Multiple cr. sections on 3dfaces — ZTTOMML (menu ID `ID_ZTTOMML`).
- `zvbl` — The location of the openings to which you have added a label with the corresponding commands has been saved and you can zoom in with this command. (menu ID `ID_ZVBL`).
- `ZXTIN` — You select (via filters) the triangles whose vertex coordinates are exported to a file. Each raw of the file is Xa,Ya,Za,Xb,Yb,Zb,Xc,Yc,Zc.. You can use this file in cros… (menu ID `ID_ZXTIN`).
- `ZZSDBXLR` — The existing layers of the design such as e.g. ''LV1_WALLS'' are renamed to ''LV1_k_WALLS''. (menu ID `ID_ZZSDBXLR`).

### Image, maps and GIS (29 reference entries)

- `DefZZTOPO` — Layer, Color, Ltype, coefficients, etc. are defined. which are initially suggested by the commands and are adapted for buildings topographic surveys. (menu ID `ID_DEFZZTOPO`).
- `IIJ` — When using the command for the first time: Select the triangles you want and the Equalities are temporarily calculated and Result. In each subsequent use of the command,… (menu ID `ID_IIJ`).
- `IIJK` — Quick temporary drawing of Isosceles with the Triangles you selected during the last use of the IIJ or IIJR. (menu ID `ID_IIJK`).
- `LBGDE` — Line, pline or arc for Auxiliary lines for the application (menu ID `ID_LBGDE`).
- `ZCCIM` — The images you select on screen are copied as files to an address of your choice. (menu ID `ID_ZCCIM`).
- `ZCIMD` — You select a new search address and for all the Images you select in the drawing and if they exist in the new address, they will be read from there. For those who are not… (menu ID `ID_ZCIMD`).
- `ID_ZDASHELP` — Forest map legend (menu ID `ID_ZDASHELP`).
- `ZDDXX` — Forest map features — ZDDXX (menu ID `ID_ZDDXX`).
- `zdfa` — SCALE object at its actual size based on one length and it's true value. You measure or enter a distance and give its real value and then accordingly selected objects inc… (menu ID `ID_ZDFA`).
- `ZDFP` — Automatically create a snippet image: Select the images and other objects to be displayed in the snippet, select the print scale, north position and title, and create a s… (menu ID `ID_ZDFP`).
- `zdfs` — SCALE objects with options of different Print Scales or conversion based on real and design dimensions. (menu ID `ID_ZDFS`).
- `ZFIM` — When the drawing has a large number of images then with this command you isolate or reappear some Images to lighten up the drawing. (menu ID `ID_ZFIM`).
- `ZIMAA` — You select the initial and final image and the objects to be transferred or copied based on the difference in position, size and rotation of the final with the original. (menu ID `ID_ZIMAA`).
- `ZIMDD` — MOVE-ROTATE-SCALE objects with average calculation from a contnuous path that you specify on the screen and the actual value of each part. (menu ID `ID_ZIMDD`).
- `ZIMDETACH` — Detach selected images — ZIMDETACH (menu ID `ID_ZIMDETACH`).
- `ZIMGEO` — You select the image to insert in the drawing and a geo-reference file with the same name is automatically being searched. If found, the image is georeferenced when inser… (menu ID `ID_ZIMGEO`).
- `ZIMGS` — You select the image on the screen and a geo-reference file with the same name is automatically searched. If found, the image changes position, rotation and scale accordi… (menu ID `ID_ZIMGS`).
- `ZIMIN` — Select an image to insert and a layer by the name ''tiff_p_(image-name)'' is automatically generated. (menu ID `ID_ZIMIN`).
- `ZIMNM` — The name is automatically displayed on the screen for as many images as you select. The text (image file name) is displayed in the upper left corner of the image (in the… (menu ID `ID_ZIMNM`).
- `ZIMPH` — Insert an image that concerns a photo which is prepared for printing by automatic size and title. (menu ID `ID_ZIMPH`).
- `ZLAY2PC` — Setting the colors and lweights of building elements so that they are distinguishable when drawing with a point cloud image as background. (menu ID `ID_ZLAY2PC`).
- `zmrs` — Average MOVE - ROTATE - SCALE objects by any pairs of points you select. (menu ID `ID_ZMRS`).
- `ZOKMZ` — Open KMZ folder (menu ID `ID_ZOPGEFOLDER`).
- `ZTITLOIDS` — Forest map declaration — ZTITLOIDS (menu ID `ID_ZTITLOIDS`).
- `ZWB` — It works like the wblock of AutoCAD and in addition images, ctbs and fonts are copied to the folder of the new drawing. (menu ID `ID_ZWB`).
- `ZWDXF` — Export part or all of the drawing to a DXF file (AutoAD version option) and additionally copy images, pens and fonts to the new drawing folder. (menu ID `ID_ZWDXF`).
- `ZZTRS2` — Search range for points will be set to 0.5 (for commands ZTIN, TTR, and TTD). (menu ID `ID_ZZTRS2`).
- `ZZTRS3` — Search range for points will be set to 0.1 (for commands ZTIN, TTR, and TTD). (menu ID `ID_ZZTRS3`).
- `ZZTRS4` — Custom search range for points for commands ZTIN, TTR, and TTD. (menu ID `ID_ZZTRS4`).

### Tables, dimensions and annotation (166 reference entries)

- `ID_222K` — It is possible to add the design attribute (As-built, Architecture, etc.) to general layers (such as MISC, ANNO-DIMS, TTLB-LEGN, etc.). (menu ID `ID_222K`).
- `50100Scale` — Default settings of SDBOX are set so that level symbols and indicators for scales from 1: 1 to 1: 100 are inserted "larger" to be able to printed also on larger scales. B… (menu ID `ID_50100SCALE`).
- `ID_ANMON` — Yellow exclamation marks for dimensions are removed from the screen. (menu ID `ID_ANMON`).
- `ASD` — Architectural or other 1:1 scale symbols that are selected from library. You can enrich the library with your own blocks. (menu ID `ID_ASD`).
- `ASDA` — Insert 1:1 scale symbols. The selection is made from a windows window and you can choose any drawing to import. (menu ID `ID_ASDA`).
- `ASDADIR` — Open the folder containing the Fixed Dimension block that was last inserted with the ASDA command (menu ID `ID_ASDADIR`).
- `ASDCHDIR` — Define the location where 1:1 scale symbols are located. Path can also be on networke. (menu ID `ID_ASDCHDIR`).
- `ASDDIR` — Open the Letter containing the Fixed Dimension blocks. You can with new folders configure categories or add new blocks. (menu ID `ID_ASDDIR`).
- `ASD` — Importing 1:1 scale symbols from library like People, Cars, Shrubs, Trees, Door Frames, Wall Lights, Lighting Columns, Roof Elements. (menu ID `ID_ASDT`).
- `BFF2` — Repeatable duble offset at 2 defined distances with selection of points within closed areas. (menu ID `ID_BFF2`).
- `BVC` — Add text that you can wrtie or select from existing block, text or xref. You can also set a fixed prefix or suffix to be added. You can set a multiplier and a decimal pos… (menu ID `ID_BVC`).
- `DBVC` — Edit prefix, suffix, decimal places and size factor for final text and set options for blocks or attributes which participate during BVC command. (menu ID `ID_DBVC`).
- `dde` — Editing content for Text (Text, Mtext), Attributes of a block and Dimensions. (menu ID `ID_DDE`).
- `ID_DIMASO1` — The dimensions are set not to be associated with the objects to which they refer. (menu ID `ID_DIMASO1`).
- `ID_DIMASO2` — The dimensions are set not to explode when importing. (menu ID `ID_DIMASO2`).
- `DMLL` — You define which blocks and based on which Attributes will the codes, for typing points, be defined . (menu ID `ID_DMLL`).
- `erase` — Model: Delete paper symbol (menu ID `ID_ERASE`).
- `ETT` — Alignment of texts along the X or Y axis. The texts selected for alignment are moved (by their base point) only by X or Y, depending on the desired axis. (menu ID `ID_ETT`).
- `F2T` — You select a file which is inserted as text on the screen. (menu ID `ID_F2T`).
- `GT` — Enter the desired length with a number or dimension on the screen and then select the objects that will reach this length. (menu ID `ID_GT`).
- `HKER` — Hatch Tiles that correspond to the symbols of the rest of the roof (ASD command). See other types of Hatch with the ZHI command. (menu ID `ID_HKER`).
- `KL` — Slope calculation between 2 points giving for each numeric value or selecting a number from the drawing (text or block) or selecting a point's Z coordinate. Once the slop… (menu ID `ID_KL`).
- `ID_KLIMAKA` — Print Scale. It is about the size and adjustments that need to be set for obects like texts, blocks, lines (non continue), dimensions etc, for quality printing results. (menu ID `ID_KLIMAKA`).
- `KN` — Add spaces between each digit of each word in a single sentence. Gradually increase or decrease length of a text that you select. (menu ID `ID_KN`).
- `KNBFT` — Choose a size coefficient for the texts that list the coordinates of the grid in case you want different from the default which is 1.000 (menu ID `ID_KNBFT`).
- `KTT` — Place multiple lines of text in standard distance between them or at custom distances. (menu ID `ID_KTT`).
- `PGEPI` — Line, pline or arc for Line - Up. See the line with the ZLL command. (menu ID `ID_LGEPI`).
- `PGSYN` — Line, pline or arc for Line - Plus View the line with the ZLL command. (menu ID `ID_LGSYN`).
- `LPATS` — Operations with Line, Pline, Spline, Arc, Text objects. The length of each line or the number in text takes part. Your numbers or distances can also be included. (menu ID `ID_LPAT`).
- `PSBL11` — Line, pline or arc for Infinity. See the line with the ZLL command. (menu ID `ID_LSBL11`).
- `MBL` — Insert blocks from a Library in a sizerelative to print range. You have the ability to type points, set a shift, and import coefficient. You can enrich the library with y… (menu ID `ID_MBL`).
- `MBLA` — Insert blocks in a sizerelative to print range. The selection is made from a Windows window and you can choose any drawing to import. (menu ID `ID_MBLA`).
- `MBLCHDIR` — Define the path where the folders with the blocks that are imported in scale are located. Path can also be on network. (menu ID `ID_MBLCHDIR`).
- `MTM` — You select a point, direction and name and the symbol of the local Section is Result. (menu ID `ID_MTM`).
- `NN2` — Indications (plain text) in 2 lines of Text. Procedure: 1. Texts from a library 2. Text Direction 3. Final Text Placement. (menu ID `ID_NN2`).
- `NNA` — Indications (plain text) 1 series. Procedure: 1. Text from a library 2. Text Direction 3. Final Text Placement (menu ID `ID_NNA`).
- `NNB` — Block indications with symbol. Options: 1. Reference Point 2. Side and Position of entry 3. Texts above and below the symbol with selection from library. (menu ID `ID_NNB`).
- `NNC` — You select the reference point of the indication, the beginning of the text entry, the paragraph is written and a circle is Result at the reference point and a line to th… (menu ID `ID_NNC`).
- `NND` — You select from 2 libraries the texts of each column and after giving the starting point the columns are Result aligned. (menu ID `ID_NND`).
- `NNG` — Specify the display position of the indicators (X to the right or left of the display area) and then the annotations are Result from the reference point to the limit (X).… (menu ID `ID_NNG`).
- `NNM` — Indications large 1 series. Procedure: 1. Text from a library 2. Text Direction 3. Final Text Placement. (menu ID `ID_NNM`).
- `NNOD` — Street names. Procedure: 1. Text from a library 2. Text Direction 3. Final Text Placement. (menu ID `ID_NNOD`).
- `NNP` — You create a table (which can be common to all your proects) of which each row indicates the type and description, then place markers with the items in the Drawing and yo… (menu ID `ID_NNP`).
- `NNR` — Specify the display position of the indicators (X to the right or left of the display area) and then the indicators are Result from the reference point to the limit (X).… (menu ID `ID_NNR`).
- `NNT` — Arrow display (plain text) of many rows. Options: 1. Point and indication address 2. Text on the screen. (menu ID `ID_NNT`).
- `NNTOP` — Toponyms areas. Procedure: 1. Text from a library 2. Text Direction 3. Final Text Placement. (menu ID `ID_NNTOP`).
- `NNX` — Indications (plain text) of 1 Series spaces. Procedure: 1. Text from a library 2. Text Direction 3. Final Text Placement (menu ID `ID_NNX`).
- `OSNDLG` — If you do not want Osnap NODE to select Texts, set the OSNAPNODELEGACY variable to 1. The command sets it automatically. (menu ID `ID_OSNDLG`).
- `O+O` — Operates with the contents of Dimension objects. Only dimensions that have a real value take action. (menu ID `ID_OSYNO`).
- `PH` — Enter a position and address for taking photos with Photo number and continuous numbering. (menu ID `ID_PH`).
- `PHLIST` — Opens a file containing the names of the photos entered in the Drawing depending on each layer. (menu ID `ID_PHLIST`).
- `PHSTI1` — Insert the phrase '' DRAWING PHOTOS 'POSITIONS' 'into the Drawing in size depending on the A4 paper side. (menu ID `ID_PHSTI1`).
- `PHSTI2` — Enter 5 lines of Text (Project, Employer, position, Date, Study Type, Design Type, scale) and Logo. Imported phrases remain in Autocad memory for import into another Draw… (menu ID `ID_PHSTI2`).
- `PSDG` — Pline Railway Design. This line is a symbol and implies both rails (usually with measurements in the center). (menu ID `ID_PSDG`).
- `RGOG` — Indications (plain text) for road and building lines. You select beginning, address, internal point O.T. and lawn width. There is the possibility to indicate the T.E. or… (menu ID `ID_RGOG`).
- `STT` — Add new text line under an existing one with the same attributes. (menu ID `ID_STT`).
- `T2F` — Export selected texts from drawing (Text, Mtext, ArcText) to a file of your choice. (menu ID `ID_T2F`).
- `T2FY` — Export selected texts from drawing (Text, Mtext, ArcText) to a file of your choice, where all text with same Y-coordinate appear on the same row. (menu ID `ID_T2FY`).
- `TCDS` — In case you are designing a new Title design or modifying an existing one then you can add fields by copying the codes from the form that opens. (menu ID `ID_TCDS`).
- `TITLOICHDIR` — Specify the folder that contains the subfolders of the various Title categories that are part of the ZTITLOI command. The path con also be on local network. (menu ID `ID_TITLOICHDIR`).
- `TST` — Enter a level symbol that indicates the Y of the point you select. You can configure decimals, units, addition, subtraction, multiplier, etc. (menu ID `ID_TST`).
- `T+T` — Operations with Text objects. Texts are included by their numerical value. Any other numbers or distances can also be included. (menu ID `ID_TSYNT`).
- `tt0` — Delete objects like Text, Mtext, Arctext, Rtext without content. Text, Mtext, Rtext, and Arctext spaces are objects in the drawing that are not visible because their cont… (menu ID `ID_TT0`).
- `TTMT` — Merge plain Text lines into one Mtext. (menu ID `ID_TTMT`).
- `TTT` — Edit text, mtext, arctext totally or individually. Convert chapters - small, add text right and left, translate utf8, find and replace, change height, Color, Style, layer… (menu ID `ID_TTT`).
- `ID_TTXX` — You select text from xref wich is re-entered in the current drawing on the same X but at any level (Y) you define. (menu ID `ID_TTXX`).
- `TTXX` — You select prases on texts from floor plan xref (space uses, ...) and this is re-written in the Section or Elevation drawing on the same X coordinate but at any level you… (menu ID `ID_TTXXT`).
- `VLVT` — A line is added with arrows (at start and end) that concerns a dimension for on-site control or a significant difference that must be resolved before delivery. They are p… (menu ID `ID_VLVT`).
- `xarti` — Insert Paper block A4 to A0 depending on the print scale. (menu ID `ID_XARTI`).
- `ZZB` — Add block or text with simultaneous export to file and multiple naming capabilities on import and on-screen editing. (menu ID `ID_XYZOUT`).
- `YPPP` — For the openings in which you have Result a panel with the SPARTYP or SPOTYP commands you can add a memo to the drawing with predefined descriptions for the type of openi… (menu ID `ID_YPPP`).
- `YYTT` — A form opens where you can select the text type (Notes, Small-Medium-Large Title, Small-Medium-Large Wide Title) to add in the drawing. (menu ID `ID_YYTT`).
- `ZBOR1` — Opens the file that contains the descriptions of the north signs and arrows that are added by ZBOR command. (menu ID `ID_ZBOR1`).
- `ZBORLIST` — Open file that contains a list with the names of the north signs and arrows that appear on the ZBOR command form. You can copy this list to the description file for modif… (menu ID `ID_ZBORLIST`).
- `zcc` — Repeatable copy of selected objects through filters. (menu ID `ID_ZCC`).
- `ZCDIM` — Red circles are added as result in those of the selected dimensions that do not have a true value but an edited one. (menu ID `ID_ZCDIM`).
- `ZCRTD` — You choose a new search address and for the Rtexts (which read a file) you select in the drawing and they exist in the new address, they will be read from there on. For t… (menu ID `ID_ZCRTD`).
- `zda` — Dimensioning (Aligned type of normal height of letters) with options: 1. Repeated Dimensioning 2. Selection of Objects 3. Continuous Dimensioning. (menu ID `ID_ZDA`).
- `zdam` — Dimensioning (Aligned type of lower letter height) with options: 1. Repeated Dimensioning 2. Selection of Objects 3. Continuous Dimensioning. (menu ID `ID_ZDAM`).
- `ZDARC` — Indication of dimension with the length of the selected arc. (menu ID `ID_ZDARC`).
- `ID_ZDASHELP` — Forest map legend (menu ID `ID_ZDASHELP`).
- `ZDD2` — Select 2 items on the screen and then draw the dimensions between them at predefined distances. (menu ID `ID_ZDD2`).
- `ZDDAS` — Selection of Autocad Dimension type with possibilities of configuration of decimals, units, size, coefficients, etc. (menu ID `ID_ZDDAS`).
- `zddat` — Select Simple Text Dimension type with the ability to configure decimals, units, sizes, coefficients, etc. (menu ID `ID_ZDDAT`).
- `ZDDG` — Automate dimensions between objects intersected by an imaginary line of your choice. (menu ID `ID_ZDDG`).
- `ZDEXASF` — Indication of distances for collateral. In the 2nd point of each dimension a code is written and at the end you can add a table of distances. (menu ID `ID_ZDEXASF`).
- `ZDFP` — Automatically create a snippet image: Select the images and other objects to be displayed in the snippet, select the print scale, north position and title, and create a s… (menu ID `ID_ZDFP`).
- `zdfs` — SCALE objects with options of different Print Scales or conversion based on real and design dimensions. (menu ID `ID_ZDFS`).
- `ZDGT` — Dimensions (plain Text) with points selected by the user (menu ID `ID_ZDGT`).
- `ZDGTF` — Dimensions (plain Text) with points selected by the user and suggested multiplier each time. (menu ID `ID_ZDGTF`).
- `zdimlist` — The dimension types of the drawing with their name and factor (DIMSCALE) are exported to a file (menu ID `ID_ZDIMLIST`).
- `ZDL` — Dimensioning (Linear type of normal height of letters) with options: 1. Repeated Dimensioning 2. Selection of Objects 3. Continuous Dimensioning. (menu ID `ID_ZDL`).
- `ZDLAYT` — Dimensions (plain Text) of all objects in the same layer (menu ID `ID_ZDLAYT`).
- `ZDLM` — Dimensioning (Linear type of lower letter height) with options: 1. Repeated Dimensioning 2. Selection of Objects 3. Continuous Dimensioning. (menu ID `ID_ZDLM`).
- `ZDOV` — Dimensions where at one end they have a circle and at the other an arrow. (menu ID `ID_ZDOV`).
- `ZDST` — Automatic dimensioning (plain text) of all objects selected. (menu ID `ID_ZDST`).
- `ZDTS` — Select the points in the area where triangulation will then be performed and specify which attribute of the blocks contains the altitude information. (menu ID `ID_ZDTMSTART`).
- `ZDTSET` — Text properties — ZDTSET (menu ID `ID_ZDTSET`).
- `ZID` — You select a point inside a closed area or you select a polyline for which a label-mark is inserted on each vertex, sides and area are displayed as text. Also a table of… (menu ID `ID_ZID`).
- `ZIDS` — Select surface points for which a label-mark is inserted on each vertex, sides and area are displayed as text. Also a table of the vertices coordinates can be added. (menu ID `ID_ZIDS`).
- `ZIMNM` — The name is automatically displayed on the screen for as many images as you select. The text (image file name) is displayed in the upper left corner of the image (in the… (menu ID `ID_ZIMNM`).
- `ZIMPH` — Insert an image that concerns a photo which is prepared for printing by automatic size and title. (menu ID `ID_ZIMPH`).
- `zkyk` — Insert block (data in a circle) with size relative to print scale and library selection. In the library you can also define descriptions for each block. (menu ID `ID_ZKYK`).
- `ZNM` — Operations on texts that are numbers. You select the operation, the number and decimal places to be listed. You can select specific types of texts where the action will t… (menu ID `ID_ZNM`).
- `ZNMB` — Operations on attribute values that are numbers. You select the operation, the number and decimal places to be listed. You can select specific types of Attributes or bloc… (menu ID `ID_ZNMB`).
- `ZNMD` — Operations on dimension values that are numbers. You select the operation, the number and decimal places to be listed. You can select specific Dimension types where the a… (menu ID `ID_ZNMD`).
- `ZPOT` — City block table — ZPOT (menu ID `ID_ZOT`).
- `ZP2T` — Define settings to display the result or all of the operations on the screen. Options: Show result or entire action, multiply result, text before and after number, text s… (menu ID `ID_ZP2T`).
- `ZPARPO1` — Opens a file that contains descriptions of the types of apertures (for SPARTYP or SPOTYP commands) that appear in the YPPP legend. (menu ID `ID_ZPARPO1`).
- `zpb1` — a list of selected blocks on the screen with options for Attributes and block Type 1 is planned. (menu ID `ID_ZPB1`).
- `zpb2` — a list of selected blocks on the screen with options for Attributes and block Type 2 is planned. (menu ID `ID_ZPB2`).
- `zpb3` — a list of selected blocks on the screen with options for Attributes and block Type 3 is planned. (menu ID `ID_ZPB3`).
- `zpb4` — a list of selected blocks on the screen with options for Attributes and block Type 4 is planned. (menu ID `ID_ZPB4`).
- `zpbl` — A table is created where columns display the contents of selected Attributes and the coordinates of the blocks you select. (menu ID `ID_ZPBL`).
- `ZPFL` — You select a file and a column separator, and a table is created listing the contents of the file. (menu ID `ID_ZPFL`).
- `ZPID` — A table is created in the columns of which the names and coordinates of the blocks are displayed for each property vertex you select. (menu ID `ID_ZPID`).
- `ZPIK` — A table is created in the columns of which the names and coordinates of the blocks are displayed for each building vertex you select. (menu ID `ID_ZPIK`).
- `ZPOT` — A table is added in the columns of which the names are displayed, the coordinates for each vertex of city block that you select on the screen. (menu ID `ID_ZPOT`).
- `ZPPOL` — A table is created in the columns of which the names, the coordinates and the altitude of the blocks are displayed for each Station you select. (menu ID `ID_ZPPOL`).
- `ZPRP` — A table is created in the columns of which the names, the coordinates and the height of the blocks are displayed for each Reper you select. (menu ID `ID_ZPRP`).
- `ZPTR` — A table is added in the columns of which the names, coordinates, altitudes, the height and the type of pedestal of the blocks are displayed for each triangulation station… (menu ID `ID_ZPTR`).
- `ZST1` — Opens the file with the descriptions of the symbols that appear on the ZST and ZSTA command tab. (menu ID `ID_ZST1`).
- `ZSTI` — Opens the logotipo_mikro.dwg drawing that participates in the PHSTI2 command. (menu ID `ID_ZSTI`).
- `ztet` — Insert block into a scale that isrelative to print scale and library selection. In the library you can also define descriptions for each block. (menu ID `ID_ZTET`).
- `ZTET1` — Open the file containing the block descriptions in a circle that appear on the ZTET command tab. You can modify the descriptions. (menu ID `ID_ZTET1`).
- `ZTETDIR` — Open folder with boxed symbols. You can modify existing or add new blocks. (menu ID `ID_ZTETDIR`).
- `ZTETLIST` — A file opens containing a list with block names on a table that appear on ZTET command form. You can copy this list to the description file for modification. (menu ID `ID_ZTETLIST`).
- `ZTITLOI` — Select the Title type to be inserted in the drawing. Then a Project database form opens where you can configure the fields for each project, export a list of drawings, et… (menu ID `ID_ZTITLOI`).
- `ZTITLOIA` — insert the Extract Heading (Application Diagram, Settlement 1: 5000, Road Extract) (menu ID `ID_ZTITLOIA`).
- `ZTITLOIT` — Select the Title box to insert into the drawing. Then a Project database opens where you can configure the fields for each project or, export a list of drawings, etc. (menu ID `ID_ZTITLOIT`).
- `ZTITLOITOD` — You choose from a form to enter the Title, the building conditions and the other statements and notes of the topographic survey. (menu ID `ID_ZTITLOITOD`).
- `ID_ZTITLOITOPO` — A block is inserted that includes all the information needed for the titles, the memoranda, the building conditions and the notes when compiling any usual topographic sur… (menu ID `ID_ZTITLOITOPO`).
- `ZTLIST` — A file opens that contains a list of TextStyles names contained in the drawing. (menu ID `ID_ZTLIST`).
- `ZTLS` — Open a file of your choice that contains a detailed List (Name, Layer, Color, Height, etc.) of the Texts (Text, Mtext, ArcText) that you select in the Design. (menu ID `ID_ZTLS`).
- `zvk` — The location of the Columns to which you have added a name and dimensions with the ZZDK command is saved and you can zoom in with this command. (menu ID `ID_ZVK`).
- `ZVPLY` — Layout: viewport by selectin symbol — ZVPLY (menu ID `ID_ZVPLY`).
- `zxb1` — Export attributes contents and coordinates by settings of type 1. (menu ID `ID_ZXB1`).
- `zxb2` — Export attributes contents and coordinates by settings of type 2. (menu ID `ID_ZXB2`).
- `zxb3` — Export attributes contents and coordinates by settings of type 3. (menu ID `ID_ZXB3`).
- `zxb4` — Export attributes contents and coordinates by settings of type 4. (menu ID `ID_ZXB4`).
- `zxbl` — Blocks are extracted in a file where each row contains the contents of selected attributes and the coordinates of the blocks you select. (menu ID `ID_ZXBL`).
- `ZXDDP` — Select as many Polylines as you want in the drawing and export them to a file: Text or Mecht inside it (in the adjacent layer itself), the surface (excluding the interior… (menu ID `ID_ZXDDP`).
- `ZYPBL` — A list is created on the screen (in the form of a memo) showing the different block types you have selected depending on block Name, Size, layer, Color, etc. and an descr… (menu ID `ID_ZYPBL`).
- `ZYPBL1` — Define - Open - Modify the first file of the descriptions displayed in the block legend. (menu ID `ID_ZYPBL1`).
- `ZYPBL2` — Define - Open - Modify the 2nd file of the descriptions displayed in the block legend. (menu ID `ID_ZYPBL2`).
- `ZYPGR` — A list is created on the screen (in the form of a memo) where the different types of Lines you have selected depending on Linetype, Scale, layer, Color, etc. are displaye… (menu ID `ID_ZYPGR`).
- `ZYPGR1` — Define - Open - Modify the 1st file of the descriptions that appear in the Line legend. (menu ID `ID_ZYPGR1`).
- `ZYPGR2` — Define - Open - Modify the 2nd file of the descriptions that appear in the Lines legend. (menu ID `ID_ZYPGR2`).
- `ZYPHH` — A list is created on the screen (in the form of a memo) where the various types of Hatch that you have selected depending on the Type, Scale, Layer, Color, etc. are displ… (menu ID `ID_ZYPHH`).
- `ZYPHH1` — Define - Open - Modify the 1st file of the descriptions that appear in the Hatch legend. (menu ID `ID_ZYPHH1`).
- `ZYPHH2` — Define - Open - Modify the 2nd description file that appears in the Hatch legend. (menu ID `ID_ZYPHH2`).
- `ZYPLAY` — A list is created on the screen (in the form of a memo) where the layer elements in the Drawing are displayed. For each layer are displayed: the name, description, the ty… (menu ID `ID_ZYPLAY`).
- `ZYPLAY1` — Define - Open - Modify the 1st file of the descriptions that appear in the layer legend. (menu ID `ID_ZYPLAY1`).
- `ZYPLAY2` — Define - Open - Modify the 2nd file of the descriptions that appear in the layer legend. (menu ID `ID_ZYPLAY2`).
- `ZYPLAYS` — Layer legend of selected — ZYPLAYS (menu ID `ID_ZYPLAYS`).
- `ZYPTT` — A list is created on the screen (in the form of a memo) where the various types of Texts (Text, Mtext and Rtext) are displayed depending on the TextStyle, size, layer, Co… (menu ID `ID_ZYPTT`).
- `ZYPTT1` — Define - Open - Modify the 1st file of the descriptions that appear in the Text legend. (menu ID `ID_ZYPTT1`).
- `ZYPTT2` — Define - Open - Modify the 2nd file of the descriptions that appear in the Text legend. (menu ID `ID_ZYPTT2`).
- `zz0` — The three-dimensional points of objects are transferred to Z = 0.00 (menu ID `ID_ZZ0`).
- `ZZARIAL` — You can set sdbox fonts to be displayed as Arial. You can also set Arial as textstyle for the rest of the fonts. (Note: Recommended in case of electronic delivery of your… (menu ID `ID_ZZARIAL`).
- `ZZATT` — Edit attributes contents. Convert to capital letters or small, add phrases at the beginning or end, change phrases, change color, layer, or textStyle (menu ID `ID_ZZATT`).
- `ZZCHR` — Display all selected TextStyle characters corresponding to grsdtopo1.shx and enter the number of each character. To enter a character: Alt + 0 + number. (menu ID `ID_ZZCHR`).
- `ZZCLF` — Enter to a file that opens automatically the layers you want to include in a new layer Filter that you specify. (menu ID `ID_ZZCLF`).
- `ZZDDA` — Deassociate dimensions — ZZDDA (menu ID `ID_ZZDDA`).
- `zzdk` — Select the basic dimensions and column name and then these are displayed in 2 lines of Text on the screen. (menu ID `ID_ZZDK`).
- `ZZTAG` — Edit Attribute (TAG) of a block. Conversion to capital letters or small, adding prefix or suffix, changing phrases. (menu ID `ID_ZZTAG`).

### Print and export (83 reference entries)

- `2R` — Copy items to a selected layer and / or move the originals to a layer with the original name and prefix or suffix of your choice. (menu ID `ID_2R`).
- `50100Scale` — Default settings of SDBOX are set so that level symbols and indicators for scales from 1: 1 to 1: 100 are inserted "larger" to be able to printed also on larger scales. B… (menu ID `ID_50100SCALE`).
- `ASD` — Architectural or other 1:1 scale symbols that are selected from library. You can enrich the library with your own blocks. (menu ID `ID_ASD`).
- `ASDA` — Insert 1:1 scale symbols. The selection is made from a windows window and you can choose any drawing to import. (menu ID `ID_ASDA`).
- `ASDCHDIR` — Define the location where 1:1 scale symbols are located. Path can also be on networke. (menu ID `ID_ASDCHDIR`).
- `ASD` — Importing 1:1 scale symbols from library like People, Cars, Shrubs, Trees, Door Frames, Wall Lights, Lighting Columns, Roof Elements. (menu ID `ID_ASDT`).
- `ELET` — Indications (Leader with dot) for personal notes in the Drawing. Their layer must be closed during printing. (menu ID `ID_ELET`).
- `erase` — Model: Delete paper symbol (menu ID `ID_ERASE`).
- `KEGSA` — Calculation of greek EGSA scale factor by selecting a point on the screen. (menu ID `ID_KEGSA`).
- `ID_KLIMAKA` — Print Scale. It is about the size and adjustments that need to be set for obects like texts, blocks, lines (non continue), dimensions etc, for quality printing results. (menu ID `ID_KLIMAKA`).
- `KNB` — You select 2 points and a grid is designed depending on the print scale. (menu ID `ID_KNB`).
- `LDOM` — Line, pline or arc for Building Line for properties outside the Plan. (menu ID `ID_LDOM`).
- `LUP` — Line, pline or arc for Elevation elements. (boundaries of entrance canopies, canopies under which there is an imprint, pergolas, etc. (menu ID `ID_LUP`).
- `MBL` — Insert blocks from a Library in a sizerelative to print range. You have the ability to type points, set a shift, and import coefficient. You can enrich the library with y… (menu ID `ID_MBL`).
- `MBLA` — Insert blocks in a sizerelative to print range. The selection is made from a Windows window and you can choose any drawing to import. (menu ID `ID_MBLA`).
- `MBLCHDIR` — Define the path where the folders with the blocks that are imported in scale are located. Path can also be on network. (menu ID `ID_MBLCHDIR`).
- `MBLDIR` — Open the Letter containing the blocks that are being imported in scale. You can with new folders configure categories or add new blocks. (menu ID `ID_MBLDIR`).
- `phklim` — Selecting the large side of A4 paper as shown on the screen calculates the print scale. (menu ID `ID_PHKLIM`).
- `PHSTI1` — Insert the phrase '' DRAWING PHOTOS 'POSITIONS' 'into the Drawing in size depending on the A4 paper side. (menu ID `ID_PHSTI1`).
- `PHSTI2` — Enter 5 lines of Text (Project, Employer, position, Date, Study Type, Design Type, scale) and Logo. Imported phrases remain in Autocad memory for import into another Draw… (menu ID `ID_PHSTI2`).
- `POPT` — Indications (Leader with a dot) for notes in the drawing concerning an on-site inspection or an important note to be resolved prior to delivery. They are printed in red o… (menu ID `ID_POPT`).
- `T2F` — Export selected texts from drawing (Text, Mtext, ArcText) to a file of your choice. (menu ID `ID_T2F`).
- `T2FY` — Export selected texts from drawing (Text, Mtext, ArcText) to a file of your choice, where all text with same Y-coordinate appear on the same row. (menu ID `ID_T2FY`).
- `VLVT` — A line is added with arrows (at start and end) that concerns a dimension for on-site control or a significant difference that must be resolved before delivery. They are p… (menu ID `ID_VLVT`).
- `xarti` — Insert Paper block A4 to A0 depending on the print scale. (menu ID `ID_XARTI`).
- `ZZB` — Add block or text with simultaneous export to file and multiple naming capabilities on import and on-screen editing. (menu ID `ID_XYZOUT`).
- `ZACADPLTST` — The folder containing the * .ctb files of Autocad will open. You can paste copied * .ctb print files into it. (menu ID `ID_ZACADPLTST`).
- `ZBLS` — Open a file of your choice that contains a Detailed List (Name, layer, Color, Scale, etc.) of the blocks you select. (menu ID `ID_ZBLS`).
- `zbor` — Insert north sign or arrow as block with a sizerelative to print scale and by selecting it from a library. (menu ID `ID_ZBOR`).
- `ZCH` — Select objects through filters to which changes for Elevation, Color, Layer, Ltype, Ltscale, Ltweight, Thickness will be applied. (menu ID `ID_ZCH`).
- `zchhs` — Each of the hatches you select gets a new scale which is the result of multiplying the scale they had before by your own number. (menu ID `ID_ZCHHS`).
- `zchl` — Each of the items you select gets a new ltscale which is the result of multiplying the ltscale they had before by your own number. (menu ID `ID_ZCHL`).
- `CONVERTPSTYLES` — If .CTB pens do not appear in your design, then type CONVERTPSTYLES, press OK and they will appear. (menu ID `ID_ZCONVERTPSTYLES`).
- `zcs` — Scale objects from their point of insertion. (menu ID `ID_ZCS`).
- `zdfa` — SCALE object at its actual size based on one length and it's true value. You measure or enter a distance and give its real value and then accordingly selected objects inc… (menu ID `ID_ZDFA`).
- `ZDFP` — Automatically create a snippet image: Select the images and other objects to be displayed in the snippet, select the print scale, north position and title, and create a s… (menu ID `ID_ZDFP`).
- `zdfs` — SCALE objects with options of different Print Scales or conversion based on real and design dimensions. (menu ID `ID_ZDFS`).
- `zdimlist` — The dimension types of the drawing with their name and factor (DIMSCALE) are exported to a file (menu ID `ID_ZDIMLIST`).
- `ZDPRR` — You select two points on the screen whose angle becomes the horizontal axis of the screen. Recommended for printing or for drawing with "Ortho" in oblique direction. (menu ID `ID_ZDPRR`).
- `ZGRLS` — Open a file of your choice that contains a detailed List (Name, layer, Color, Scale, etc.) of the Lines (Linetypes) that you select. (menu ID `ID_ZGRLS`).
- `ZHHLS` — Open a file of your choice that contains a detailed List (Name, Layer, Color, Scale, etc.) of the hatches you select. (menu ID `ID_ZHHLS`).
- `ZIMDD` — MOVE-ROTATE-SCALE objects with average calculation from a contnuous path that you specify on the screen and the actual value of each part. (menu ID `ID_ZIMDD`).
- `ZIMGS` — You select the image on the screen and a geo-reference file with the same name is automatically searched. If found, the image changes position, rotation and scale accordi… (menu ID `ID_ZIMGS`).
- `ZIMPH` — Insert an image that concerns a photo which is prepared for printing by automatic size and title. (menu ID `ID_ZIMPH`).
- `zkyk` — Insert block (data in a circle) with size relative to print scale and library selection. In the library you can also define descriptions for each block. (menu ID `ID_ZKYK`).
- `ZLAY2NORM` — Colors for Plan, Elevation or Section printing are set. (menu ID `ID_ZLAY2NORM`).
- `ZLPT` — Select a drawing area that is copied and enlarged according to the print scale. (menu ID `ID_ZLPT`).
- `zmrs` — Average MOVE - ROTATE - SCALE objects by any pairs of points you select. (menu ID `ID_ZMRS`).
- `ZMSB` — Select first the block that has the desired X, Y, Z Scale and then the blocks to get the same scales. (menu ID `ID_ZMSB`).
- `ZPDFIN` — Insert pdf on layer with same name. The first time you run the command, the search address of the pdf file is defined as that of the drawing. (menu ID `ID_ZPDFIN`).
- `ZPLOTSTYLES` — The folder containing the sdbox * .ctb files (pens) will open. You can copy these files to the Autocad Plot Styles folder (Menu -&gt; File -&gt; Plot Style Manager). (menu ID `ID_ZPLOTSTYLES`).
- `ZSFILE` — A form opens where the selected file is displayed and you can apply filters and export parts of the file. (menu ID `ID_ZSFILE`).
- `ztet` — Insert block into a scale that isrelative to print scale and library selection. In the library you can also define descriptions for each block. (menu ID `ID_ZTET`).
- `ZTITLOI` — Select the Title type to be inserted in the drawing. Then a Project database form opens where you can configure the fields for each project, export a list of drawings, et… (menu ID `ID_ZTITLOI`).
- `ZTITLOIT` — Select the Title box to insert into the drawing. Then a Project database opens where you can configure the fields for each project or, export a list of drawings, etc. (menu ID `ID_ZTITLOIT`).
- `ZVPLK` — Set the rectangle of the new viewport in Layout, select its center in Model and provide display scale. You can also add the coordinates of the Center. (menu ID `ID_ZVPLK`).
- `ZWB` — It works like the wblock of AutoCAD and in addition images, ctbs and fonts are copied to the folder of the new drawing. (menu ID `ID_ZWB`).
- `ZWDXF` — Export part or all of the drawing to a DXF file (AutoAD version option) and additionally copy images, pens and fonts to the new drawing folder. (menu ID `ID_ZWDXF`).
- `ZXAG` — Simple export of objects to a file where both the point of entry or the beginning and their content can be indicated. (menu ID `ID_ZXAG`).
- `zxb1` — Export attributes contents and coordinates by settings of type 1. (menu ID `ID_ZXB1`).
- `zxb2` — Export attributes contents and coordinates by settings of type 2. (menu ID `ID_ZXB2`).
- `zxb3` — Export attributes contents and coordinates by settings of type 3. (menu ID `ID_ZXB3`).
- `zxb4` — Export attributes contents and coordinates by settings of type 4. (menu ID `ID_ZXB4`).
- `zxbl` — Blocks are extracted in a file where each row contains the contents of selected attributes and the coordinates of the blocks you select. (menu ID `ID_ZXBL`).
- `ZXDDP` — Select as many Polylines as you want in the drawing and export them to a file: Text or Mecht inside it (in the adjacent layer itself), the surface (excluding the interior… (menu ID `ID_ZXDDP`).
- `ZXGE` — Export to Google Earth — ZXGE (menu ID `ID_ZXGE`).
- `ZXGPT` — Lines: Start and end points are exported. Pline: The peaks are extracted. Arc: The beginning and end points, the center and the midpoint are exported in the middle of the… (menu ID `ID_ZXGPT`).
- `ZXID` — Blocks for property vertices items are exported to a file where each row contains names and coordinates. (menu ID `ID_ZXID`).
- `ZXIK` — Export building vertices — ZXIK (menu ID `ID_ZXIK`).
- `ZXPOL` — Blocks for survey stations are exported to a file where each row contains the names, the coordinates and the altitude. (menu ID `ID_ZXPOL`).
- `ZXREP` — Blocks for Reper contents are exported to a file where each row contains the names, coordinates and altitude. (menu ID `ID_ZXRP`).
- `ZXTAX` — Survey points blocks contents are exported to a file where each row contains the names, coordinates and altitude. (menu ID `ID_ZXTAX`).
- `ZXTIN` — You select (via filters) the triangles whose vertex coordinates are exported to a file. Each raw of the file is Xa,Ya,Za,Xb,Yb,Zb,Xc,Yc,Zc.. You can use this file in cros… (menu ID `ID_ZXTIN`).
- `ZXTRI` — Triangulation stations blovks are exported to a file where each row contains the names, the coordinates, the altitude and the height and type of pedestal. (menu ID `ID_ZXTRI`).
- `ZYPGR` — A list is created on the screen (in the form of a memo) where the different types of Lines you have selected depending on Linetype, Scale, layer, Color, etc. are displaye… (menu ID `ID_ZYPGR`).
- `ZYPHH` — A list is created on the screen (in the form of a memo) where the various types of Hatch that you have selected depending on the Type, Scale, Layer, Color, etc. are displ… (menu ID `ID_ZYPHH`).
- `ZZI` — Add property vertices with multiple naming capabilities when importing and designing on the screen (and exporting to file). (menu ID `ID_ZZI`).
- `ZZK` — Add building vertices with multiple naming capabilities when inserting and designing on the screen (and the ability to export to a file). (menu ID `ID_ZZK`).
- `ID_ZZKLIM` — Change print scale for sdbox commands. (The LtypeScale and blocks are not affected). (menu ID `ID_ZZKLIM`).
- `ZZPDF` — Automatic printing to PDF. You only select the area and all the rest is done by sdbox. (menu ID `ID_ZZPDF`).
- `zzSavePropScadD` — The settings for Layer, Color, Ltype, coefficients, etc. suggested by sdbox are saved in a file from which they can be uploaded to another computer. (menu ID `ID_ZZSAVEPROPSCADD`).
- `zzSdtopoCADPenakia` — Basic plotsytles width and color (menu ID `ID_ZZSDTOPOCADPENAKIA`).
- `zzSdtopoCADPenakia2` — Detailed plotsytles width and color list (Excel) (menu ID `ID_ZZSDTOPOCADPENAKIA2`).

## 25. Confirmed English illustrated PDF guides

The PDFs below are **external official references**, not PDF text transcriptions. They complement the command-by-command MNU index and the corresponding English HTML help.

- [Survey plan: step-by-step illustrated guide](https://www.sdtopocad.net/sdbox_TOPO_EN.pdf)
- [Floor plan: illustrated guide](https://www.sdtopocad.net/sdbox_FLOOR-PLAN_EN.pdf)
- [Building section: illustrated guide](https://www.sdtopocad.net/sdbox_SECTION_EN.pdf)
- [Building elevation: illustrated guide](https://www.sdtopocad.net/sdbox_ELEV_EN.pdf)

**Documentation provenance:** English MNU, English HTML help and English CUIX. The PDF guides are linked, not reproduced.

## 26. Additional stand-alone menu entries

The original menu also contains actions without an `ID_...` prefix. They are included here so their displayed names and literal shortcuts are not lost. Actions with only a menu-macro and no documented command remain unlabeled as typed commands.
- **1a. Insert useful Layer Filters — ZZLF** — CAD command `ZZLF` — menu: Topography &gt; Survey plan...step by step
- **8. Display elevations of single contours — SSAS** — CAD command `SSAS` — menu: Topography &gt; Triangles - Contours - Volume &gt; Contours
- **Open ASD symbols folder — ASDDIR** — CAD command `ASDDIR` — menu: Floor plans &gt; Floor plan...step by step &gt; 4. Architectural symbols
- **Description of symbols — ZST1** — CAD command `zst1` — menu: Floor plans &gt; Floor plan...step by step &gt; 8. Level marks
- **List of symbols — ZSTLIST** — CAD command `ZSTLIST` — menu: Floor plans &gt; Floor plan...step by step &gt; 8. Level marks
- **Open folder — ZSTDIR** — CAD command `ZSTDIR` — menu: Floor plans &gt; Floor plan...step by step &gt; 8. Level marks
- **3b. Window — OPSPAR** — CAD command `OPSPAR` — menu: Sections-Elevation plans &gt; Section...step by step
- **6. L e v e l s — TST** — CAD command `TST` — menu: Sections-Elevation plans &gt; Elevation view...step by step
- **On-off layers — SDD** — displayed shortcut `SDD` — menu: Layers &gt; On-Off
- **Print to PDF ZZPDF** — CAD command `ZZPDF` — menu: Misc &gt; File-Print-Save As
- **Export to dxf ZWDXF** — CAD command `ZWDXF` — menu: Misc &gt; File-Print-Save As
- **Tasks check list — CHECK-CEC** — CAD command `CHECK` — menu: Misc &gt; Check List

<!-- SDBOX_EN_HTML_REFERENCE_START -->
---

## 27. English HTML help article extracts (official SDBOX sources)

This section contains the readable text of **58 English HTML help extracts filtered against the current English CUIX** from the SDBOX Manual Portal. The original links remain available for screenshots and interactive examples. The illustrated PDFs are referenced elsewhere in this manual and are not text-dumped here.

### Source index

1. [sdbox: Views](https://www.sdtopocad.net/index.files/APOPSEIS_SXEDIOY_EN.htm)
2. [sdbox: Dialogs with phrases](https://www.sdtopocad.net/index.files/BIBLIOTHIKH_EN.htm)
3. [sdbox: Edit Text, Block, Dimension, Rtext](https://www.sdtopocad.net/index.files/DDE_EN.htm)
4. [sdbox: Files Tasks Google Earth](https://www.sdtopocad.net/index.files/DIAFORA_EN.htm)
5. [sdbox: Dimensions](https://www.sdtopocad.net/index.files/DIASTASEIS_EN.htm)
6. [sdbox: Topographic Declarations & Notes](https://www.sdtopocad.net/index.files/Diloseis_Topografikou_EN.htm)
7. [sdbox: Annotations](https://www.sdtopocad.net/index.files/ENDEIXEIS_EN.htm)
8. [sdbox: Block Conditions](https://www.sdtopocad.net/index.files/EPILOGES_GIA_BLOCK_EN.htm)
9. [sdbox: Default layers](https://www.sdtopocad.net/index.files/EPILOGES_LAYER_EN.htm)
10. [sdbox: Drawing Options for Lines and Polylines](https://www.sdtopocad.net/index.files/EPILOGES_MLLMBL_EN.htm)
11. [sdbox: Selection filters](https://www.sdtopocad.net/index.files/EPILOGH_ANT_ME_FILTRA_EN.htm)
12. [sdbox: Witnessing](https://www.sdtopocad.net/index.files/EXASFALISEIS_EN.htm)
13. [sdbox: Install and use](https://www.sdtopocad.net/index.files/Egkatastasi_EN.htm)
14. [SDBOX FAQ - Product, Installation, Licensing & Workflows](https://www.sdtopocad.net/index.files/FAQ_EN.htm)
15. [sdbox: Calc](https://www.sdtopocad.net/index.files/GIA_ARITHMOYS_EN.htm)
16. [sdbox: Blocks](https://www.sdtopocad.net/index.files/GIA_BLOCKS_EN.htm)
17. [sdbox: Lines](https://www.sdtopocad.net/index.files/GIA_GRAMMES_EN.htm)
18. [sdbox: Text](https://www.sdtopocad.net/index.files/GIA_KEIMENA_EN.htm)
19. [sdbox: Hatch & Legends](https://www.sdtopocad.net/index.files/HATCH_EN.htm)
20. [sdbox: Images](https://www.sdtopocad.net/index.files/IMAGES_EN.htm)
21. [sdbox: Insert points](https://www.sdtopocad.net/index.files/ITAX_EN.htm)
22. [sdbox: FLOOR PLAN](https://www.sdtopocad.net/index.files/KATOPSEIS_EN.htm)
23. [sdbox: Plot scale](https://www.sdtopocad.net/index.files/KLIMAKA_EN.htm)
24. [sdbox: Layers](https://www.sdtopocad.net/index.files/LAYERS_EN.htm)
25. [Maps in SDBOX - SDBOX Manual](https://www.sdtopocad.net/index.files/MAPS_SDBOX_EN.htm)
26. [sdbox: Modify](https://www.sdtopocad.net/index.files/MODIFY_EN.htm)
27. [sdbox: Offset](https://www.sdtopocad.net/index.files/OFFSET_EN.htm)
28. [sdbox: Photos](https://www.sdtopocad.net/index.files/PHOTOS_EN.htm)
29. [sdbox: Math operations](https://www.sdtopocad.net/index.files/PRAXEIS_EN.htm)
30. [SDBOX TIN / DTM Tools - Command Reference](https://www.sdtopocad.net/index.files/Page14280_EN.htm)
31. [sdbox: Contours](https://www.sdtopocad.net/index.files/Page14696_EN.htm)
32. [sdbox: Coords display](https://www.sdtopocad.net/index.files/Page3938_EN.htm)
33. [sdbox: Settings](https://www.sdtopocad.net/index.files/RYTHMISEIS_EN.htm)
34. [sdbox: Textstyles](https://www.sdtopocad.net/index.files/SDFONTS_EN.htm)
35. [SDBOX Workflows & Guides - SDBOX Manual](https://www.sdtopocad.net/index.files/START_INSIDE_CAD_EN.htm)
36. [Getting started with SDBOX - SDBOX Manual](https://www.sdtopocad.net/index.files/START_SDBOX_EN.htm)
37. [sdbox: Study Composition](https://www.sdtopocad.net/index.files/Sintaxi_Topografikon_EN.htm)
38. [sdbox: SECTIONS-ELEV](https://www.sdtopocad.net/index.files/TOMES_OPSEIS_EN.htm)
39. [sdbox: Navigation Toolbar](https://www.sdtopocad.net/index.files/TOOLBAR_PERIHGHSHS_EN.htm)
40. [SDBOX Survey Plan Tools - Command Reference](https://www.sdtopocad.net/index.files/TOPOGRAFIA_EN.htm)
41. [Survey plan with SDBOX - SDBOX Manual](https://www.sdtopocad.net/index.files/TOPO_SDBOX_EN.htm)
42. [What is SDBOX? - SDBOX Manual](https://www.sdtopocad.net/index.files/WHAT_IS_SDBOX_EN.htm)
43. [sdbox: Import-Export](https://www.sdtopocad.net/index.files/XYZOUT_EN.htm)
44. [sdbox: Calculations & Operations](https://www.sdtopocad.net/index.files/YPOLOGISMOI_KAI_PRAXEIS_EN.htm)
45. [sdbox: Calculate Z](https://www.sdtopocad.net/index.files/YPOLOGISMOS_Z_EN.htm)
46. [sdbox: Legend](https://www.sdtopocad.net/index.files/YPOMNHMATA_EN.htm)
47. [sdbox: Property data](https://www.sdtopocad.net/index.files/ZAA_EN.htm)
48. [sdbox: Compass and arrows](https://www.sdtopocad.net/index.files/ZBOR_EN.htm)
49. [sdbox: Blocks in circle](https://www.sdtopocad.net/index.files/ZKYK_EN.htm)
50. [sdbox: BLocks table](https://www.sdtopocad.net/index.files/ZPBL_EN.htm)
51. [sdbox: Floor plan level mark](https://www.sdtopocad.net/index.files/ZST_EN.htm)
52. [sdbox: Blocks in boxes](https://www.sdtopocad.net/index.files/ZTET_EN.htm)
53. [sdbox: Import views](https://www.sdtopocad.net/index.files/ZVIM_EN.htm)
54. [sdbox: Export Blocks](https://www.sdtopocad.net/index.files/ZXBL_EN.htm)
55. [sdbox: Blocks Legend](https://www.sdtopocad.net/index.files/ZYPBL_EN.htm)
56. [sdbox: Lines Legend](https://www.sdtopocad.net/index.files/ZYPGR_EN.htm)
57. [sdbox: AutoCAD Text Legend (ZYPTT) - SDBox Design Software](https://www.sdtopocad.net/index.files/ZYPTT_EN.htm)
58. [sdbox: Edit Attributes](https://www.sdtopocad.net/index.files/ZZATT_EN.htm)

### English reference articles

#### Article 1: sdbox: Views

**Original:** https://www.sdtopocad.net/index.files/APOPSEIS_SXEDIOY_EN.htm

## Drawing Views

SDBox Design Software - Command guide for creation and management of drawing Views in Model and Layout

### View Creation ZVM

Move on screen with the mouse and save various drawing areas as display type (View) which you can recall with the ZVV command.

The command is used when you have areas in the same Drawing at long distance from each other so you can move from one area to another easily.

The same use is when you have e.g. details in the Drawing and with this command you save them with characteristic names and then move from one to another with the ZVV command.

This message reminds you of the command procedure.

Move on screen only with the mouse and the middle wheel (not with zoom window etc.) and as long as the area you want appears on screen write the name of the View that will be saved.

View creation example

The procedure continues in the same way for as many Views as you want.

Each time you run the command new Views are added to the previous ones.

#### Note:

View names are saved also in file **.zzview in the same folder as the Drawing.

If you change the Drawing name then you must also change the name of this file accordingly to use these Views with the ZVV command.

### Drawing Views ZVV

Recall the drawing Views you have created with the ZVM command.

Drawing Views selection interface

Select with double click or OK the View you want and the screen zooms to this area of the Drawing.

### Import View from another Drawing ZZVVIM

Import into the present drawing Views that you have created in another Drawing with the ZVM, ZVBL and ZVK commands.

From the other Drawing you select, the Views it has are imported into your Drawing and the files of the corresponding commands are updated simultaneously.

Details

### Align Vports in Model ZVF

Define 2 Vports in the Model which will be aligned in X or Y between them when you execute the ZVFF command.

An example use of the command is during drawing a Section or Elevation where 2 Vports are used, one for the Plan and one for the Section or Elevation.

Select whether alignment will be on X or Y axis. If you type X:

Select a point in the Vport from which Vport you will determine the "zoom" and the X position for the next one.

Select a point in the Vport which will follow the previous one according to the above when you execute the ZVFF command.

Vport alignment example

### Align Vports with previous selections ZVFF

Alignment of Vports that you have defined with the ZVF command.

When you type this command the 2 Vports that have been defined with the ZVF command are aligned with same "zoom" and same position in X or in Y.

For example in the above command ZVF example if you are in the following state:

Before alignment

And you type ZVFF then you will have the following alignment result of the 2 Drawings between them:

After alignment

### New ViewPort in Layout with center in Model ZVPLK

Define the rectangle of the new Viewport in Layout and select in Model its center and display scale. You can also annotate the Center coordinates in Layout.

The command must start from Layout.

Details: Layer Selection

Give the 1st point of the frame of the new Vport in Layout.

Give the 2nd and last point of the frame of the new Vport in Layout.

You are transferred to Model and either select a point on screen that will be the Center of the new Vport, or select a Block whose insertion coordinates will be the Center.

In both cases you have the possibility, subsequently, to annotate the Center coordinates at the edge of the new Vport.

If you select Block then you also have the possibility to annotate the Attribute values.

Model view

If you want display in real dimensions of the Drawing then give 1.000

Then you select whether to annotate the Center coordinates and the Block Attribute values.

Example

### New ViewPort from Model in same coordinates ZVPMC

Define an area in Model which is displayed in Layout with Viewport in the same coordinates.

The command must start from Layout.

Details: Layer Selection

Give the 1st point of the frame of the new Vport in Model.

Give the 2nd and last point of the area in Model.

Area selection in Model

In Layout the frame of the new Vport will be drawn anyway.

If you want display in real dimensions of the Drawing then give 1.000

Then the new Vport is drawn in Layout in the same coordinates as the points you selected in Model.

### Zero rotation Vport VV0

The Viewports in Layout that you select are set to have the rotation you give in their display.

If you want zero rotation then give rotation 0.00

---

#### Article 2: sdbox: Dialogs with phrases

**Original:** https://www.sdtopocad.net/index.files/BIBLIOTHIKH_EN.htm

## Phrase Selection from Dialog

SDBox Design Software - Guide for selecting phrases from libraries to add text or write to Attribute Blocks during various SDBOX commands

### Overview

Selection of phrase for adding text or writing to Attribute Block during the execution of various SDBOX commands.

The library of each command is different and you have the ability to save or remove phrases.

In each new Drawing, the corresponding library appears updated with any changes you have made.

For each command you have the ability to choose between two libraries that you have defined for two types of Drawings.

Below follows for the annotation command NNB . The same applies to all commands.

Phrase library dialog example (NNB command)

### Add Phrase

What is written in the field "Text:" is added to the List and will appear in each new use of the command in any drawing.

This allows you to build personalized libraries of frequently used phrases for each type of annotation or text insertion.

#### Usage:

When you find yourself repeatedly typing the same text in multiple drawings, add it to the library to save time in future work.

### Remove Phrase

Removes from the List whichever phrase you have selected.

Use this to clean up your libraries by removing outdated, incorrect, or rarely used phrases.

#### Tip:

You can always add a removed phrase back later using the "Add" function if needed.

### Cancel

No text is selected.

Use this option when you open the library dialog but decide not to insert any text at this point.

#### Note:

The command will continue execution as if no text selection was made, which may result in empty text attributes or prompts for manual text entry depending on the specific command.

### Hide Dialog

The dialog is temporarily hidden and you can navigate the screen using the mouse wheel.

You return to the dialog with right-click and Exit .

This feature is useful when you need to see what's behind the dialog box to make a better selection or reference point.

#### Usage:

When the library dialog covers an important part of your drawing that you need to see to make a proper annotation placement.

### Edit Library File

Opens the corresponding file that contains the library phrases where you can add or delete phrases.

Direct editing of library file

This gives you direct access to the underlying text file that stores all phrases for the current command's library.

#### Important:

Changes made to the file directly will not appear in the dialog until you use the Refresh List function or restart the command.

Use a plain text editor to modify these files, preserving the file format and encoding.

### Refresh List

The List is refreshed with any changes you made to the above file.

After editing the library file directly, use this function to update the dialog without needing to close and reopen it.

#### Tip:

Always refresh after making direct file edits to ensure you're seeing the current library contents.

### Drawing Type A / Type B

Refers to the two types of libraries you can use for two types of Drawings.

If you press "Drawing Type B Annotations" then the phrases you have saved for Type B Drawings will appear in the List.

You can switch between the 2 libraries at any time in the Drawing.

The library type you select is defined for each subsequent command that uses libraries and the corresponding ones will appear in the Lists.

You can change the Drawing type again at any time.

#### Practical Application:

This feature allows you to maintain separate phrase libraries for different project types - for example, one set of annotations for residential projects and another for commercial projects, or different libraries for different clients with specific terminology requirements.

#### Note:

The library selection is persistent across commands within the same drawing session, providing consistent terminology throughout your work on a particular project type.

---

#### Article 3: sdbox: Edit Text, Block, Dimension, Rtext

**Original:** https://www.sdtopocad.net/index.files/DDE_EN.htm

## Edit Text, Block, Dimension, Rtext

SDBox Design Software - Unified content editing tool for CAD drawings

### DDE Command DDE

A unified editing tool for modifying content of Text, MText, Block Attributes, Dimensions, and Rtext objects.

The DDE command was originally created for AutoCAD 2000 with the purpose of being a single command that edits content of Text, Blocks, and Dimensions, and opens the folder where an Rtext reads from.

This command provides a consistent interface for modifying various types of textual content in your CAD drawings, streamlining your workflow and reducing the need to switch between different editing tools.

#### Compatibility:

The DDE command is available in AutoCAD 2010-20xx, BricsCAD, GstarCAD, and ZwCAD when using the SDBox add-on software.

### Command Overview

Editing content of Text, MText, Attributes of a Block, Dimension values, and Rtext.

The DDE command serves as a centralized editing tool for various text-based objects in your CAD drawings. It intelligently detects the type of object you select and presents the appropriate editing interface.

For Text, MText, and Blocks , the command functions similarly to the corresponding AutoCAD editing commands but with enhanced features and a unified interface.

For Dimensions and Rtext , it offers special functionality described in detail below.

#### Workflow Advantage:

Using a single command for all text editing tasks reduces cognitive load and improves efficiency, especially when working with drawings containing multiple types of text objects.

### Text Editing

Editing single-line text objects with the DDE command.

When you select a Text object, the DDE command opens a simple text editor where you can modify the content directly. This functionality is similar to AutoCAD's standard text editing but integrated into the unified DDE interface.

Text editing dialog for single-line text

#### Usage Notes:

- Supports all standard text formatting options

- Maintains text style and properties

- Provides real-time preview of changes

- Allows multiline editing with Enter key

### MText Editing

Editing multiline text objects with advanced formatting options.

When you select an MText object, DDE opens a more comprehensive editor that supports rich text formatting, paragraph styles, bullet points, and other advanced text features.

Multiline text editor with formatting options

#### Advanced Features:

- Rich text formatting (bold, italic, underline)

- Paragraph alignment and indentation

- Bulleted and numbered lists

- Column layouts for technical documentation

- Import/export of text content

### Block Attribute Editing

Editing attribute values within block references.

When you select a Block containing attributes, DDE presents a dialog showing all attribute definitions and their current values. You can edit individual attributes or modify multiple attributes simultaneously.

Block attribute editing interface

#### Attribute Management:

The command preserves attribute definitions (tags, prompts, defaults) while allowing you to edit the displayed values. This is particularly useful for title blocks, symbols, and other standardized elements.

#### Common Applications:

- Updating title block information

- Modifying symbol attributes

- Editing equipment tags and labels

- Updating revision information

### Dimension Editing

Special editing capabilities for dimension objects.

The DDE command provides enhanced functionality for dimension editing, including the ability to restore actual measured values or use them within phrases.

Restoring actual dimension value

Entering custom text for dimension

#### Actual Value Restoration:

You can restore the actual measured value of a dimension at any time. This is useful when dimensions have been overridden with custom text and need to be reset to their accurate measurements.

#### Custom Text and Phrases:

You can enter other values or phrases that will be displayed on screen for the dimension. The actual value can be used within a phrase as explained in the instructions below:

Dimension text formatting and phrase construction

#### Practical Examples:

- O<> - Displays diameter symbol followed by actual value

- Approx. <> mm - Adds prefix and suffix to actual value

- See detail <> - Uses actual value in instructional text

- Max. <> tolerance - Combines actual value with specifications

The <> placeholder represents the actual measured dimension value.

### RText Editing

Editing Rtext objects that read from external files.

The command only works with Rtext objects that read from a file. When you select such an Rtext object, DDE opens the associated file for editing.

Rtext (Remote Text) is a special type of text object in CAD that displays content from an external text file. This is particularly useful for notes, specifications, or other content that needs to be consistent across multiple drawings or frequently updated.

#### Common RText Applications:

- General notes and specifications

- Drawing revision history

- Standard disclaimers and copyright notices

- Project descriptions and scope

- Material schedules and legends

#### File Management:

When editing Rtext, you're actually modifying the external text file that the Rtext object references. Changes made to this file will automatically update in all drawings that reference it.

#### Best Practices:

- Store Rtext files in a centralized project folder

- Use descriptive filenames for different note types

- Implement version control for important specification files

- Create templates for commonly used Rtext content

---

#### Article 4: sdbox: Files Tasks Google Earth

**Original:** https://www.sdtopocad.net/index.files/DIAFORA_EN.htm

## Files - Tasks - Google Earth

SDBox Design Software - Command guide for file management, task control, paper insertion, tables, details, and folder access in CAD drawings

### Tasks Check CEC

Opens a tab where you can mark which tasks, from a predefined task list, have been completed.

You can view and check off completed tasks from a predefined checklist. The displayed list can be specified or changed using the ZVFE command or the CEC1 - CEC5 commands.

#### Task List Selection

The tasks displayed in the tab are selected from one of the 5 lists of the ZVFE command or the CEC1 - CEC5 commands.

#### ZOOM in Drawing >>:

The tab is temporarily hidden, and you are moved to the drawing screen where you can navigate through the drawing to check it.

Press Enter or right-click to return to the tab.

Navigation is done with the mouse on the screen (middle scroll wheel for zoom in, zoom out, and pan).

During navigation, you can execute several drawing viewing and configuration commands from the Toolbar that opens.

Note: If you execute other AutoCAD commands (outside the Toolbar), the command will be terminated.

Tasks check interface

Navigation toolbar during drawing review

#### Notes:

The command provides a systematic way to track project completion stages directly within your CAD environment.

#### Command Usage:

Use this command during project reviews, quality checks, or when collaborating with team members to ensure all drawing tasks are completed.

### Selection - Configuration ZVFE

Opens a tab where you can view and edit the files that participate in various commands.

You can also select which file category each command will read when executed, including the CEC command.

Command files configuration interface

#### Tips:

This command serves as a central configuration panel for multiple SDBox commands, allowing you to customize which data files each command uses.

### Editing - 1, 2, 3, 4, 5 CEC1-5

Select which of the 5 available files the CEC command will read during execution to display the corresponding tasks in the tab.

By typing CEC1, CEC2, CEC3, CEC4, or CEC5 you define which file the command will read (1, 2, 3, 4, or 5 respectively), and you can also edit it if desired.

You can do the same by running the above ZVFE command.

#### File creation / editing

CEC1: Creates and updates file //SDBOX/ERGASIES1.dat

CEC2: Creates and updates file //SDBOX/ERGASIES2.dat

Each time you run one of the above commands, the corresponding .dat file is set as default and the CEC command searches for task lists in it.

If you don't run any of the 5, then ERGASIES1.dat is set as default.

File selection prompt

Esc or No: The command ends and file //SDBOX/ERGASIES2.dat is set as the one that the CEC command will read.

Yes: Again the above file is set as default and the command continues by opening it for editing.

First execution message

#### Editing the task list

Editing the task list file

If you subsequently run the CEC command, the tasks as you have defined them in the above file will appear in the tab.

#### Notes:

When the explanation files are fully defined, you use the CEC1-CEC5 commands only to determine which file the CEC command will read.

#### Command Usage:

Whenever you want to configure the task list file or define which file the CEC command will read for task lists.

#### Tips:

Create separate task lists for different project types (e.g., architectural, mechanical, electrical) and switch between them using these commands.

### Paper A4 - A0 XARTI

Insert a Paper Block from A4 to A0 size according to the print scale.

Inserts a paper border/title block of standard sizes (A4, A3, A2, A1, A0) scaled appropriately for your drawing's print scale.

Paper size and scale selection

#### Selection options

You select the scale and paper type (A4, A3, A2, A1, A0).

Scale and paper type selection interfaces

#### Insertion parameters

Then on screen you provide Layer , insertion point, and rotation.

Note: The Layer suggested as default by the command is defined not to print.

#### Notes:

The paper block includes a standard title block area for project information, scale indication, and revision history.

#### Command Usage:

Use this command when preparing drawings for printing or when creating drawing sheets with standardized borders.

### Table from File ZPFL

Select a file and column separator, and a table is drawn listing the file contents.

This command imports tabular data from external text files and creates a formatted table in your drawing.

File and table configuration interface

#### File selection and configuration

File selection dialog

You can select different column separators:

Column separator options

Text format and other options:

Text formatting and additional options

Details: Layer Selection

#### Table preview

Table preview before insertion

You select the table insertion point and then provide the Title.

The height of the texts in the Table that is finally drawn on screen is set automatically according to the print scale.

Table insertion point selection

#### Notes:

This command is ideal for importing schedule data, material lists, or any tabular information from external sources into your CAD drawing.

#### Command Usage:

Import Excel data (saved as CSV or tab-delimited text) or any other tabular data into your drawing as a formatted table.

### Drawing Detail Cutout ZLPT

Select an area of the drawing which is redrawn in another area, scaled according to the detail print scale and the main drawing print scale.

Creates a detail view of a specific area of your drawing at a different scale for clarity.

Detail creation interface

#### Process steps:

- Enter the Detail Number. This number is drawn both in the original area of the Drawing and in the area where the Detail is drawn.

- Select the center point of the detail area.

- Provide the circle radius by number or dimension on screen.

- Select the point (outside the rest of the Drawing) where the Detail will be drawn.

- Ask if you want to Trim objects outside the circle.

- Enter the print scale of the Detail.

- Confirm the print scale of the rest of the Drawing. Based on the 2 scales, the enlargement or reduction is calculated and applied to the Detail objects.

- Place the Detail Title at the desired position.

#### Notes:

The detail maintains all object properties and layers, ensuring consistency with the main drawing.

#### Command Usage:

Create enlarged views of complex areas, connection details, or any part of your drawing that requires closer examination at a larger scale.

#### Tips:

Use different detail numbers for organization and reference in your drawing documentation.

### Open Drawing Folder ZDRC

Opens (via Windows) the folder where the current drawing is located.

The command is designed for easy access to the drawing's folder at any time, without needing that folder to be constantly open.

Opening the drawing folder

#### Command Usage:

Quickly access supporting files, xrefs, images, or other documents stored in the same folder as your drawing.

#### Tips:

This is especially useful when working with drawings that have multiple referenced files in the same directory.

### File Preview ZSFILE

Opens a tab where a selected file is displayed and you have the ability to apply filters and extract portions of the file.

Select the file from a Windows dialog, and then a tab opens where you can view the file, apply filters in relation to the phases or numbers it contains.

If you apply a filter, you can export the result to a new file. You can always view the file in its original form.

File preview and filtering interface

#### Notes:

- Uppercase and lowercase letters are considered different.

- If you want to apply a filter for more than one phrase, write them all in the corresponding field with commas in between.

- Spaces are taken into account. (Don't put spaces before or after the comma that separates the different phrases you're searching for)

- You have 2 fields for applying filters. In the first write what you want the phrases to contain and in the other what you don't want them to contain. A combination of these two fields can be made.

- After applying filters you can export the result to a new file.

- You can open the displayed file at any time.

For example, if you want to isolate lines that start from 100 to 299, then write [12]##* in the filter field to show lines that contain, and you get the following result:

#### Command Usage:

Preview and filter large data files, coordinate lists, or any text-based data before importing into your drawing.

### Open SDTOPO Folder ZSSDD

Opens the SDBOX program folder.

The command is designed for easy access to SDBOX files or folders at any time.

SDBOX program folder

#### Command Usage:

Access configuration files, support files, or other resources stored in the SDBOX installation directory.

#### Tips:

Use this command to quickly access and modify SDBOX configuration files or check for available resources.

---

#### Article 5: sdbox: Dimensions

**Original:** https://www.sdtopocad.net/index.files/DIASTASEIS_EN.htm

## AutoCAD Dimensions

SDBox Design Software - Command guide for dimension creation and management in CAD drawings

### Dimension Type Selection ZDDAS

Selection of AutoCAD dimension type with formatting capabilities for decimals, units, size, factors, etc.

Dimensions are drawn in size proportional to the drawing scale.

#### Dimension symbol for scales 1:1 up to 1:100:

Dimension symbol for scales 1:1 to 1:100

#### Dimension symbol for scales larger than 1:100:

Dimension symbol for scales larger than 1:100

#### Layer selection for dimensions:

See the General Command ' Layer Selection '

#### Command Operation

You select one of the 17 AutoCAD-type dimension commands presented below.

The settings you make in the above tab are saved and suggested in each new use of the command in any Drawing.

#### Note:

If you have already executed any of the dimension commands and have made changes to the Dimension Style in AutoCAD, then to keep these changes (and not revert to default settings in what you have drawn) select "Draw in Current Dim Style".

At the end of each command you are informed of the number of dimensions added to the Drawing.

### Linear Dimensions (Aligned/Linear) ZDA, ZDAM, ZDL, ZDLM, ZDOV

These commands function similarly to the corresponding AutoCAD ones with the following options:

- Repeated Dimensioning.

- Object Selection.

- Continuous Dimensioning.

Linear dimension example

#### Command Details

- ZDA DimAligned Normal Internal-External: Aligned type with normal letter height.

- ZDAM DimAligned Small: Aligned type with smaller letter height.

- ZDL DimLinear Normal Internal-External: Linear type with normal letter height.

- ZDLM DimLinear Small: Linear type with smaller letter height.

- ZDOV DimLinear Insurances (circle - arrow): Aligned type with normal letter height, where one end has a circle and the other an arrow.

Below is an example for ZDA. The others work similarly.

#### Command Steps

Details: Layer Selection

Select the 1st point for the 1st dimension. If you right-click or press Enter you can select an object to be dimensioned automatically.

Give the 2nd point or select object.

The dimension has been drawn and you place it in its final position.

Give the next dimension. If you don't want another dimension you can give "No" or press Enter twice or right-click.

If you press Yes or right-click then a dimension continuous to the last one you placed is temporarily drawn.

Give the 2nd point of the continued dimension or with right-click or Enter select another dimension from which you want to continue.

#### Tip:

If from the beginning you want to reach this point (of continuous dimension) you can give Enter or right-click in all questions.

### ...between 2 objects ZDD2

Select 2 objects on screen and then dimensions are drawn between them at the distances you specify.

Dimension between 2 objects

For the 2 objects you can select Lines, *Polylines, Arcs, Splines, Circles, Ellipses.

Dimensions start from the 1st object perpendicular to the 2nd.

They are drawn along the 1st at a distance you give with a number or with a dimension on screen.

### ...at intersection with imaginary line ZDDG

Give an imaginary line and dimensions are drawn at the intersection points of the imaginary line with the objects it crosses.

Dimension at intersection with imaginary line

Give the 2 points of the imaginary line and dimensions are drawn automatically at any points where objects intersect.

### Angle of 3 points ZDW

Select the center of the angle and then the 2 ends. Then select whether to draw the internal or supplementary angle.

Angle of 3 points

Select with the mouse the 3 points of the angle with first the center.

Move with the mouse and define whether the internal or supplementary will be drawn.

You can then draw continuous angles at subsequent points.

### Angle of selected objects ZDWS

Select objects and the angle between them is drawn.

Angle of selected objects

Select with the mouse the objects for angle between them.

Move with the mouse and define whether the internal or supplementary will be drawn.

For objects you can select Line, Pline, Arc, Circle.

If you select Arc then the angle from the center to the ends of the arc is drawn.

If you select Circle then you also give a 2nd point for which the angle from the Center is drawn.

### Azimuth of 2 points ZDWA

Select 2 points between which the Azimuth is drawn.

Azimuth of 2 points

Select with the mouse the 2 points for which the Azimuth will be calculated.

Move with the mouse and define whether the internal or supplementary angle will be drawn.

Continue with next points for Azimuth.

### Radius ZDRAD

Radius annotation of selected arc or circle.

Radius dimension

Select the circle or arc and define the position of the radius annotation internally or externally.

Continue with the next circle or arc.

The letter "R" is added at the beginning of the radius length annotation.

### Diameter ZDDIAM

Diameter annotation of selected arc or circle.

Diameter dimension

Select the circle or arc and define the position of the diameter annotation internally or externally.

Continue with the next circle or arc.

The symbol "O" is added at the beginning of the diameter length annotation.

### Radius of selected objects ZDRADS

Simultaneous radius annotation of selected arcs or circles.

Radius of selected objects

Select, via filters, as many circles and arcs as you want.

The radii are drawn automatically in those you selected.

Object selection with filters

### Diameter of selected objects ZDDIAMS

Simultaneous diameter annotation of selected arcs or circles.

Diameter of selected objects

Select, via filters, as many circles and arcs as you want.

The diameters are drawn automatically in those you selected.

Object selection with filters

### Center of selected objects ZDCS

Simultaneous center annotation of selected arcs or circles.

Center of selected objects

Select, via filters, as many circles and arcs as you want.

The centers are drawn automatically in those you selected.

Object selection with filters

### Arc Length ZDARC

Dimension annotation with the length of selected arc.

Arc length dimension

Select the arc for length calculation.

Move with the mouse and define whether the length of the drawn arc or the length of the remaining imaginary circle will be drawn.

Continue with the selection of the next arc.

### Find Dimensions with non-real value ZCDIM

Red circles are drawn on those of the selected dimensions (AutoCAD type) that do not have real value but write something else.

Select, via filters, the dimensions you want to check.

In those where the real value is not found and something else is written, a circle is drawn on Layer "z_Diastaseis_No-True-Value".

You can edit these dimensions with the DDE command.

Object selection with filters

### Simple Text Dimension Selection ZDDAT

Selection of simple Text dimension type with formatting capabilities for decimals, units, size, factors, etc.

Dimensions are drawn in size proportional to the drawing scale.

Simple Text dimension selection interface

#### Layer selection for dimensions:

See the General Command ' Layer Selection '

#### Command Operation

You select one of the 5 simple Text dimension commands presented below.

The settings you make in the above tab are saved and suggested in each new use of the command in any Drawing.

At the end of each command you are informed of the number of texts added to the Drawing as dimensions.

### Dimensioning by Layer ZDLAYT

Dimension annotation (simple Text) of all objects that are on the same Layer.

Dimensioning by Layer examples

Give the Layer on which the dimension texts will be drawn. Details

Select on screen an object which belongs to the Layer you wish to dimension.

Then side length dimensions for Lines, Plines and total length for Splines and Arcs will be automatically added to all objects that have the same Layer as the one you selected.

#### Note:

In the command tab of ZDDAT you can also set a minimum value, where dimensions smaller than this value are marked in the Drawing and moved to Layer z_Dim-Lathos.

### Dimensioning of selected objects ZDST

Dimension annotation (simple Text) of all objects selected by the user.

Dimensioning of selected objects examples

Give the Layer on which the dimension texts will be drawn. Details

Select, via filters, the characteristics of the objects to be dimensioned or select objects directly on screen.

Then side length dimensions for Lines, Plines and total length for Splines and Arcs will be automatically added to all objects you selected.

Object selection with filters

#### Note:

In the command tab of ZDDAT you can also set a minimum value, where dimensions smaller than this value are marked in the Drawing and moved to Layer z_Dim-Lathos.

### Dimensioning with points ZDGT

Dimension annotation (simple Text) with points that the user selects on objects or not.

Dimensioning with points

Give the Layer on which the dimension texts will be drawn. Details

Give on screen the 1st point for the 1st dimension.

Give on screen the 2nd point for the 1st dimension or press Enter for new Start.

Give on screen the 3rd point for the 2nd dimension or press Enter for new Start.

Continue like this for as many points as you want.

### Dimensioning with points and factor ZDGTF

Dimension annotation (simple Text) with points that the user selects and suggested multiplier each time.

While in the above command ZDGT you can enter a factor by which lengths will be multiplied (in the command tab of ZDDAT), in this command you are asked for a factor each time and you can also select Viewport (if you run the command in Layout) where depending on the Scale the corresponding factor is calculated so that dimensions are the real ones.

The command was created for cases where you want to change factor frequently and for cases where the points you select are in Viewport in Layout where if the Viewport does not have scale 1:1 then depending on the display scale the correct factor for annotation of real dimensions is calculated.

Otherwise the command functions like the previous ZDGT.

#### Note:

When you select Viewport (if you run the command in Layout) then depending on its scale such factor is suggested so that the real dimension is displayed on screen, provided that what the Viewport displays has been drawn 1:1.

Again you can not accept the suggested factor and give your own.

### Insurances Dimensioning ZDEXASF

Dimension annotation (simple Text) with points that the user selects and suggested multiplier each time. At the 2nd point of each dimension a code is written and at the end you can add a table of distances.

Insurances dimensioning

The command functions like the above ZDGTF with the difference that you can give prefix and numbering for each 2nd point of each dimension and that a Table with Codes and dimensions is added.

#### Note:

When you finish with the first two points then define new start if you want to give distance again from the 1st point.

### Change Dimension Text DDE

Editing of contents, Texts (Text, Mtext), Attributes of a Block, dimension values (Dimensions) and Rtext.

The command was initially created for Acad 2000 with the purpose of being the same command that edits contents of Texts, Block and Dimension.

Details

### zzDistance ZDD

Repeated distances. Each of the distances is written in the Command Line. You can also type point codes.

The command functions like the corresponding AutoCAD one with the difference that successive distances are written in the command line and you are informed if you select 3D points.

Details

---

#### Article 6: sdbox: Topographic Declarations & Notes

**Original:** https://www.sdtopocad.net/index.files/Diloseis_Topografikou_EN.htm

## Topographic Declarations & Notes

SDBOX Design Software - Complete guide for declarations, notes and annotations when drafting topographic drawings

This page describes the declaration and note sections included in the ZTITLOI command for drafting topographic drawings. It includes all necessary elements for titles, notes, building regulations and annotations.

### Introduction

The ZTITLOI command (for inserting Title-Blocks) also contains 8 sections related to drafting Topographic drawings. You can add any additional elements you want to these sections.

Note: See the board creation procedure here .

The 8 sections for drafting topographic drawings

### Topographic Titles

Includes overall Title-blocks with note frames, building regulation frames, area calculation formulas, declarations and notes for common Topographic drawings inside and outside the Plan.

Topographic titles and notes

### Coordinate Systems

Coordinate System Reference notes placed in the top left corner of the Canvas (Local System, HATT, EGSA '87, UTM).

Coordinate and reference systems

### Registration method

Registration details that must be included in the Notes if the Drawing is referenced (GPS, Traverse, Leveling...).

Topographic survey dependency elements

### Frames & Tables

Includes:

- Frame for inserting automated symbol and line notes. (Note: The frame already contains explanations for building classifications and open/closed balcony and roof that must appear in a frame.)

Topographic frames and tables

### Map excerpts

Includes the titles of common extracts that accompany Topographic drawings:

- Map of larger area

- Location map

- Orthophoto map

- Town plan

- Cadastral map

- Road map

Note: These titles are placed above the image of the extract.

Topographic extract titles

### Building Regulations

Includes a frame for completing Building Regulations.

Building regulations frame

### Surveyors certificates

Default certificate.

Declarations for topographic drawings outside plan

### Statements and Notes

Default statements and notes:

- Datum level notes

- Qwnership statement

- Surveyors statement

- Altitude certificate

- Forest map certificate

- Land registry certificate

Declarations for topographic drawings inside plan

### Miscellaneous

- Area calculation formula

Various additional elements

### Topographic Drafting Guide

#### Important Notes:

The ZTITLOI command contains 8 complete sections for drafting topographic drawings. You can customize and extend these sections according to your needs.

#### Tips:

Use the PDF guide for detailed step-by-step instructions on drafting topographic drawings.

Watch the available videos for visualization of the process.

Adjust frames and declarations according to the specific requirements of each project.

---

#### Article 7: sdbox: Annotations

**Original:** https://www.sdtopocad.net/index.files/ENDEIXEIS_EN.htm

## CAD Drawing Annotations

SDBox Design Software - Command guide for inserting text, blocks, symbols, leaders, coordinates, and notes in CAD drawings

### Annotation Selection ZNN

Selection of Annotation command from a tab with size specification capabilities.

Annotation selection interface

You select the type of annotation you want to add to the Drawing.

The annotation type you select is stored in the command's memory and is suggested in each new use, where you can accept it simply by pressing Enter .

Each annotation command type is analyzed below.

#### General Note:

Annotations in the Drawing refer to descriptions of lines, objects, areas, etc., or notes for your own reminders.

All annotations (Texts, Blocks, symbols) are inserted into the Drawing in a size proportional to the printing scale.

### Annotation with Symbol NNB

Annotations of Block type with symbol and texts above and below the line.

#### Procedure

- Reference point of the annotation.

- Side and drawing position of the Block.

- Texts above and below the symbol with selection from library.

Example of annotation with symbol

Then you select the annotation reference point (dot) and the side that will determine the type of Block to be inserted (top left, top right, horizontal left, bottom right, or horizontal right).

For horizontal ones, select the labeling side with Ortho .

The length of the Block's horizontal lines depends on the length of the texts you select from the libraries:

Text selection from library

After you select the texts for above and below the line, the Block is drawn and the command continues for the next annotation.

You can leave the top and bottom line empty (by pressing Cancel in the respective library). If both are empty, the Block is not drawn.

If in the next annotation you want the same texts, you can simply press Enter when the libraries open.

#### Notes:

The 36 Blocks that are inserted have names from E2 to E6f .

If you want to manage them collectively, in Block management commands and selection with filters , you can type E#* in the field for Block name. (#: single digit number, *: any or no character).

In all the above Blocks of the command, the Attribute of the top line is named ENDEIXI1 and the bottom one ENDEIXI2 . You can manage all Attributes collectively if you want because they have the same name.

### Simple Annotation NNA

Annotations (simple text) of a single line.

#### Procedure

- Text from library.

- Text direction.

- Final Text placement.

Simple annotation example

Text selection from library

After you select the text, the command continues for angle and final placement on the screen.

If in the next annotation you want the same text, you can simply press Enter when the libraries open.

### Spaces... NNX

Annotations (simple text) of a single line for Spaces. The text size is larger than the text of Spaces.

Spaces annotation example

The library that opens is that of the Spaces.

### Large Annotations NNM

Large Annotations (simple text) of a single line for areas or drawing titles.

The library that opens is that of the Spaces.

### Roads / Streets NNOD

Annotations (simple text) of a single line for Roads.

#### Procedure

- Text from library.

- Text direction.

- Final Text placement.

Roads annotation example

Roads text selection from library

The library that opens is that of the Spaces.

### Place Names / Areas NNTOP

Annotations (simple text) of a single line for Place Names.

#### Procedure

- Text from library.

- Text direction.

- Final Text placement.

Place names annotation example

Place names text selection from library

The library that opens is that of the Spaces.

### Custom Annotation NNC

Annotations (paragraph of simple text) with reference point and annotation lines.

Procedure: You select the annotation reference point, the start point of text labeling, write the paragraph, and a dot is drawn at the reference point and a line up to the end of the longest phrase.

Custom annotation example

You write as many text lines as you want. To change text line, simply press Enter .

When you finish with the texts, a horizontal line will be drawn with a length up to the longest text row.

Custom annotation result

#### Tip:

For selecting the text labeling point, it is recommended to have the ORTHO option On . The drawing is clearer and its elements more distinct when such type of annotations are inserted with vertical lines.

### Two-line Annotations NN2

Annotations (simple text) of two text lines.

#### Procedure

- Texts from libraries.

- Direction of both texts.

- Final placement of Texts.

Two-line annotation example

Text selection from library (two libraries open sequentially)

After you select the texts from the respective libraries, the command continues for angle and final placement on the screen for both lines.

If in the next annotation you want the same text, you can simply press Enter when the libraries open.

### Left/Right Annotations NNR

Annotations (simple text) that are aligned right or left from the Drawing and refer to basic areas of the Drawing.

The line connecting the reference point with the annotation text is not continuous (but dots) and no dot is drawn at the reference point.

Left/Right annotation example

You select the 1st annotation point. A line (with dots) is drawn from this point up to the end of the annotation lines calculated above.

You select text from the library and it is automatically written after the end of the annotation line.

Left/Right annotation result

### Annotation with Line (outside) NNG

Annotations (simple text) with dot and line that are aligned right or left from the Drawing.

Annotation with line (outside) example

You write as many text lines as you want. To change text line, simply press Enter .

The texts are written starting from the end of the annotation line and directed towards the drawing area.

Annotation with line result

### Two-column Annotations NND

Annotations (simple text) of two columns with selections from libraries.

You select from 2 libraries the texts of each column and after giving the starting labeling point, the columns are drawn automatically aligned.

Two-column annotation example

Text selection from library (two libraries open, one for each column)

You continue with the selections of the next texts for each column from the libraries.

The texts from here on are drawn automatically on the screen below the previous ones of each column.

### Table Annotations NNP

Insertion of horizontal annotations (with dot and line or only text) with selection from a predefined list of descriptions.

You configure a table (which can be common for all your Drawings) each row of which mentions the type and description, then you place annotations with the types in the Drawing, and you have the ability to insert a memo with the types and descriptions.

The most common use of the command is for labeling materials in an elevation, where materials are categorized by number (1, 2, …) so they don't occupy drawing space in the Elevation, and based on a description file for each material, a memo of material explanations is placed outside the Drawing.

Table annotation example

#### Configuration — Table Preview:

You select a file, configure it according to the above instructions, save it, and close it.

You execute this procedure when you want to define or select another file or when you want to add descriptions.

It is recommended to create template files that you use in all Drawings.

If you agree with the file listed at the bottom of the tab and do not want to make changes, then when the tab opens press directly ">>> continue" .

Table configuration interface

#### Example file

Example table file structure

You select the annotation reference point (dot).

Then you select the 2nd point up to which the annotation line will be drawn. You can type line length. You are reminded of the last line length drawn with the command and if you want you can put the same so that annotations are uniform.

#### Tip:

For selecting the 2nd point, it is recommended to have the ORTHO option On . The drawing is clearer and its elements more distinct when such type of annotations are inserted with horizontal lines.

If you want the annotation to have only a number then simply press Enter .

Category selection for table annotation

After you give a point or choose to label only a number, then you select a category from the tab that opens.

From the category you select, only the number is written in the Drawing.

You continue with the next Annotations and at the end you choose whether a Memo of Annotation descriptions will be inserted.

It is recommended to insert a Memo when you have finished with the annotations.

Final annotation with table/memo

### Notes-1,2 (Leader with Dot or Arrow) ONN, ONN2, VNN, VNN2

Insertion of notes of Leader type (with dot ONN, ONN2 or arrow VNN, VNN2).

The 4 commands follow the same procedure and are divided into 2 with dot and 2 with arrow with the main purpose of having the type of 2 suggested Layers depending on the category of notes.

These commands have been created for your own notes that are not finally printed in the Drawing. You can of course make any other use.

Leader annotations: with dot (left) and with arrow (right)

The command procedure is as follows:

You select the 1st annotation reference point, 2nd point for line end and start of text labeling, and write as many text lines as you want.

### Annotation with Arrow NNT

Annotation with arrow (simple text) of multiple rows.

#### Procedure:

- Point and direction of annotation.

- Texts on the screen (as many rows as you want).

The arrow is always drawn at the same length.

Annotation with arrow

### Heights (from floor) NNH

Insertion of height annotation Block with calculation and operation capabilities.

The command has been designed for labeling height of elevation elements (roof beams, roof steps, eaves projection, canopies, etc.).

Height annotation example

Then you select the annotation reference point (dot) and the side that will determine the type of Block to be inserted.

You select what will be written before the number. Each new prefix is suggested for the next symbol.

Link to Calculations and Operations details

You continue with the next height annotation.

### Coordinate Labeling NNXY

Labeling of Coordinates of each point you select on the screen.

You select a point and labeling side on the screen and the coordinates are written in 14 different ways.

Coordinate labeling interface (click for details)

### Selection - List Configuration ZVFE

Opens a tab where you can view and edit the files that participate in various commands.

You can also select which file category each command will read when executed.

Command files configuration interface

File selection example

---

#### Article 8: sdbox: Block Conditions

**Original:** https://www.sdtopocad.net/index.files/EPILOGES_GIA_BLOCK_EN.htm

## Block Selection Settings

SDBox Design Software - Configure block and attribute properties for various CAD commands

### Overview

Select which Blocks and which Attributes of those Blocks will participate in each command.

This tab opens in various variations in commands with similar settings. Below, all fields are analyzed for all cases.

Block selection settings interface

#### Important:

In the first uses of commands, all program Blocks are defined depending on the category.

### Interface Description

In this section, you choose how blocks will be selected for participation in commands.

Select only Blocks with Attributes. Attributes are the parts of the Block that contain values (in text form) that the command can read.

All Blocks are selected regardless of whether they have Attributes or not.

In this part of the tab, you select which Blocks will participate in the command (based on their name). If you want all to participate, you can type "*" in the field "Last selection Block:".

### Drawing Block Selection

Opens the following tab which contains the names of the Blocks that exist in the Drawing and you can select which of them will participate in the command.

Select one at a time and after pressing OK, it is written in the field "Last selection Block:".

You can press the "Drawing Block" button as many times as you want and each new name will be written after the existing ones in the field "Last selection Block:" separated by a comma ",".

If you press cancel, nothing is written and the field "Last selection Block:" remains as is.

Drawing block selection dialog

### Blocks...

You are transferred to the drawing screen and select with the mouse the Blocks you want to participate in the command by their name.

When you finish with the Block selections, the names of the Blocks you have selected are written in the field "Last selection Block:" .

You can also simply write in this field or select from your List of previous selections.

### Attributes

The same applies as above.

The order in which you write the Attributes matters for various commands.

### Help

The Help button provides additional information and guidance for using the block selection settings.

Help dialog for block selection settings

#### Usage Tips:

1. Use the "Drawing Block" button to quickly select blocks from your current drawing.

2. Use wildcard "*" to select all blocks when needed.

3. The order of attributes is important for commands that process multiple attributes.

4. Save your frequent selections for quick reuse in future commands.

#### Common Use Cases:

Topographic Surveys: Select specific survey point blocks with elevation attributes.

Architectural Plans: Choose door/window blocks with size and material attributes.

Electrical Diagrams: Select electrical symbol blocks with rating attributes.

Mechanical Drawings: Choose fastener blocks with size and material attributes.

---

#### Article 9: sdbox: Default layers

**Original:** https://www.sdtopocad.net/index.files/EPILOGES_LAYER_EN.htm

## Default Layer Selection

SDBox Design Software - Guide for setting default layer, color, and linetype settings in CAD commands

### Overview

Most commands that draw objects on screen provide the ability to select the suggested Layer from the command tab and the final drawing Layer from a List that opens before drawing begins.

This functionality ensures consistent drawing standards and allows for quick verification of drawing properties during rapid design work.

#### Key Feature:

The layer selection appears in every use of the commands and aims to control what is being drawn during fast-paced design work.

### Command Tab Section

Command tab section for default settings

In this section of each command's tab, you define the Layer , Color , and Linetype that will be suggested when using the command.

If the command tab has a list where various sub-commands are selected, then the above section of the tab changes according to the category.

You can have the same suggested settings in all categories.

#### Important:

Settings are saved only after you press Save in each field.

The selections you have made for all commands (in the respective tabs) can be transferred to another computer through the Settings .

#### Usage:

This feature is particularly useful when working with templates or when you need to maintain consistent drawing standards across multiple projects or team members.

### Layer Selection Dialog

After finishing with the tab, the following dialog opens to confirm that you want to draw on the suggested Layer or to select other settings:

Layer selection dialog with options

#### Pro Tip:

You can accept the suggested settings simply by pressing Enter and continue with the command, speeding up your workflow significantly.

### Available Options

You have the following options in the Layer Selection dialog:

#### A. Press Enter

Simply press Enter to accept the suggested settings.

#### B. Select Different Settings

Choose another Layer, Color, or Linetype .

The different selections you make will be suggested in each use of the command in this drawing, regardless of the Layer you have set as default suggested.

In a New Drawing, what you have set as default suggested will be proposed again.

#### C. Currents

Sets the current Layer, Color, and Linetype that the Drawing has at this moment.

#### D. Escape and Manual Entry

You can press Escape and define a new Layer by typing it in the Command Line and selecting Color.

#### Note:

Another reason for this functionality is to allow you to draw objects of the same command in different Layers with ease.

### Important Notes

#### Notes:

The Layer selection appears in every use of the commands and aims to control what is being drawn during fast-paced design work.

You can accept the suggested settings simply by pressing Enter and continue with the command.

Another reason is to allow you to draw objects of the same command in different Layers with ease.

#### Best Practices:

Set up your default layers according to your company or project standards to ensure consistency across all drawings.

Use the Currents option when you need to temporarily match existing objects in the drawing.

Remember to save your settings after making changes to ensure they persist for future use.

#### Integration:

This layer selection system integrates with all SDBox drawing commands, ensuring a consistent workflow whether you're drawing lines, blocks, text, or any other CAD elements.

---

#### Article 10: sdbox: Drawing Options for Lines and Polylines

**Original:** https://www.sdtopocad.net/index.files/EPILOGES_MLLMBL_EN.htm

## Drawing Options for Lines and Polylines

SDBox Design Software - Advanced drawing tools during Line, Polyline and Block commands in CAD

### Introduction

Enhanced drawing capabilities during Line and Polyline commands with SDBox software.

While drawing Lines or Polylines, or inserting Blocks to scale, you have significantly more options than the standard AutoCAD commands. The following example demonstrates drawing a Line or Polyline as these commands contain the complete set of available options.

#### Compatibility:

These enhanced drawing options are available in AutoCAD 2010-20xx, BricsCAD, GstarCAD, and ZwCAD when using the SDBox add-on software.

The SDBox software extends the standard CAD functionality by providing additional geometric construction tools, point creation methods, and drawing aids that streamline the design process.

### Drawing Options Overview

During Line, Polyline drawing or Block insertion at scale, you have numerous additional options beyond standard AutoCAD commands.

The SDBox add-on provides enhanced functionality that integrates seamlessly with your CAD workflow. The options appear in the command line during drawing operations, offering you extended capabilities without interrupting your design process.

Drawing interface with extended options

#### Key Benefits:

- Integrated tools without switching commands

- Context-sensitive options based on current operation

- Enhanced precision with additional construction methods

- Streamlined workflow for complex drawings

### MLL Command MLL

#### Initial Point Specification

You specify the first drawing point. (See Details for point input )

#### Available Options

You have the following options during drawing:

- Select a point with the mouse on screen or type coordinates.

- If code input is enabled , you can type a code and the line (or block in the corresponding command) will be drawn at the insertion point of the Block containing that code in its corresponding Attribute.

- Undo: Undoes the last object drawn at the last point.

- Length: Specify a length which is drawn in the direction of the cursor. (This option works like the corresponding AutoCAD option.)

- Arc: Whether drawing Line or Polyline, you can add an arc with 3 points.

- Seira (Series): If code input is enabled, you can specify first and last code where drawing will occur at these and all intermediate points.

- Kataskeyes (Construction): Opens the construction tab where you can create points using various geometric methods.

Construction tab for point creation

#### Practical Applications:

The MLL command is particularly useful for survey drawings, topographic plans, and any application where you need to draw lines to specific coded points or use geometric constructions frequently.

### Point Creation Options

The Construction tab provides multiple methods for creating points during drawing operations.

These geometric construction tools allow you to create precise points without leaving the drawing command, significantly improving productivity for complex drawings.

#### Available Construction Methods

- POINT ON LINE: Specify 2 points defining the line and distance D from the first point.

- MIDPOINT OF LINE: Specify 2 points defining the line. The midpoint is calculated automatically.

- INTERSECTION OF LINES: Specify 2 points for the first line and 2 points for the second line. The intersection point is calculated.

- PERPENDICULAR DISTANCE FROM LINE: Specify 2 points defining the line, perpendicular distance from the first point, and perpendicular length.

- PROJECTION OF POINT ON LINE: Specify 2 points defining the line and the 3rd point to be projected.

- INTERSECTION OF CIRCLES: Specify center and radius of the 1st and 2nd circle.

- TANGENT TO CIRCLE: Specify center and radius of circle and select the tangent on screen.

- INTERSECTION OF LINE - CIRCLE: Specify 2 points of the line and for the circle center point and radius.

- PARALLEL THROUGH POINT: Specify 2 points of the line (for direction) and distance from the 3rd point.

#### Precision Note:

All construction methods use double precision calculations, ensuring accuracy even in large-scale drawings with complex geometry.

#### Workflow Tip:

Use these construction tools instead of separate construction lines. They create temporary geometric relationships that don't clutter your drawing with unnecessary objects.

### Detailed Construction Tools

#### Geometric Constructions

POINT ON LINE: Enter the 2 points that define the line and the distance D from the first point.

MIDPOINT OF LINE: Enter the 2 points that define the line. The midpoint is calculated automatically.

INTERSECTION OF LINES: Enter the 2 points that define the first line and 2 points that define the second line. Based on these, the intersection point will be calculated.

PERPENDICULAR DISTANCE FROM LINE: Enter the 2 points that define the line, the perpendicular distance from the first point, and the perpendicular length.

PROJECTION OF POINT ON LINE: Enter the 2 points that define the line and the 3rd point to be projected.

INTERSECTION OF CIRCLES: Enter center and radius of the 1st and 2nd circle.

TANGENT TO CIRCLE: Enter center and radius of circle and select the tangent on the screen.

INTERSECTION OF LINE - CIRCLE: Enter the 2 points of the line and for the circle enter center point and radius.

PARALLEL THROUGH POINT: Enter the 2 points of the line (for direction) and distance from the 3rd point.

#### Professional Use Cases:

- Surveying and topographic mapping

- Architectural floor plans

- Mechanical part design

- Civil engineering drawings

- Landscape design

### Enhanced Block Insertion

During block insertion at scale, you have similar enhanced options as with line drawing.

The SDBox software extends block insertion capabilities, allowing you to:

- Insert blocks by attribute codes

- Use geometric construction points for insertion

- Insert series of blocks at coded points

- Maintain scale and rotation with construction tools

#### Block Management:

When working with attributed blocks, you can type the attribute code during insertion to automatically place the block at the correct location with predefined attributes.

#### Scale Considerations:

Blocks inserted with these tools maintain their scale relative to the drawing units, ensuring consistency across different viewports and layouts.

For detailed information about block-specific options and attribute management, see the Block Options documentation .

---

#### Article 11: sdbox: Selection filters

**Original:** https://www.sdtopocad.net/index.files/EPILOGH_ANT_ME_FILTRA_EN.htm

## Selection with Filters

SDBox Design Software - Guide for selecting objects by type, layer, color, linetype, and textstyle in CAD drawings

### Overview

Selection of objects based on type, Layer, color, Linetype, or Textstyle and combination of all these or selection of their opposites.

This feature allows you to filter and select objects in your drawing based on specific properties, making it easier to work with complex drawings.

Selection filters dialog interface

### Same as Selection [pick]

Select an object on screen and then all similar ones regarding Layer, Color, Ltype, Textstyle, size, scale, etc.

This option allows you to quickly select all objects that share the same properties as a selected reference object.

### Select Opposites

The opposites of whatever selections you make in the dialog are selected.

This is useful when you want to select everything except objects with certain properties.

### All

All checkboxes are selected.

The use of this option serves cases where you need most of the dialog options and only need to disable a few.

### Clear

All selections (checkboxes) are deactivated.

Use this to start with a clean slate when defining new selection criteria.

### Object Types

Select one or more object types.

You can choose from various object types including LINE, SPLINE, TEXT, and others to filter your selection.

### Text, Mtext, Arctext, Attribute Selection with Phrase Search or Block by Name

Text, Mtext, Arctext: After selecting these objects, you can distinguish only those containing specific phrases.

Attribute: After selecting Blocks that have Attributes, you can distinguish only those containing specific phrases.

Block: After selecting Blocks, you can distinguish some based on their names.

### Selection by Layer

Select one or more Layers to participate in the selection.

You can also use Wildcards e.g. Iso***, Wall#@, etc.

When selecting more than one Layer, they are separated by comma ",".

### Selection by Color

Select a color that the objects to be selected will have.

This filter selects objects based on their color property.

### Selection by Linetype

Select one or more Linetypes to participate in the selection.

You can also use Wildcards e.g. Ax*** etc.

When selecting more than one Linetype, they are separated by comma ",".

### Selection by Textstyle

Select one or more Textstyles to participate in the selection.

You can also use Wildcards e.g. GR*** etc.

When selecting more than one Textstyle, they are separated by comma ",".

### Text Phrase Search

If you have set the "Text with phrase search" option, the above tab opens.

You can write what the phrases of the Texts to be selected will contain. Different phrases are separated by comma ",".

Text phrase search dialog

#### Help

All phrases contained in the selected Texts are displayed. Each time you open this tab, the phrase you select is added to the selection.

Text phrase selection help

#### Info

Opens the tab below where examples of Wildcards usage that you can use in the phrases you are searching for are listed.

Wildcards usage information

### Block Name Search

If you have set the "Block with name search" option, the above tab opens.

You can write what the names of the Blocks to be selected will contain. Different names are separated by comma ",".

Block name search dialog

#### Help

All names of the selected Blocks are displayed. Each time you open this tab, the name you select is added to the selection.

Block name selection help

#### Info

As above (Wildcards information).

### Attribute Phrase Search

If you have set the "Attributes with phrase search" option, the above tab opens.

You can write what the phrases of the Attributes to be selected will contain. Different phrases are separated by comma ",".

Attribute phrase search dialog

#### Help

This field is inactive for Attributes.

#### Info

As above (Wildcards information).

### Object Selection Options

The object types and other settings you have selected are displayed for your information.

You can select the area containing the objects or "all". From what you select, only those that have the above properties will be distinguished.

As in most SDBOX and AutoCAD commands where you select objects with "Select objects", you have the following options:

- All: All drawing objects are selected and those that present the selected properties are automatically searched.

- F: Fence: You define lines and only objects intersected by them are selected.

- WP: Window Polygon: You define a polygon and objects located inside it are selected.

- CP: Cross Polygon: You define a polygon and objects within it and those intersected by the polygon sides are selected.

- G: Group: You select a Group which you have defined with the AutoCAD Group command.

- A: Add: You add points to your selection. This option is default and should only be used after selecting Remove.

- R: Remove: You remove points from your selection.

- P: Previous: Points you selected during the last command that had "Select objects" are selected.

- U: Auto: This option differentiates the selection method with 2 points (BOX) as follows: When selecting with "rectangle" from left to right, only objects completely within the rectangle are selected, while from right to left, intersected objects are also selected.

- S: Single: The selection capability ends after you select the first object.

#### Notes:

The tab that opens for "selection by filters" can be rejected with Esc and you can continue the respective command.

If you select some filters and continue the command that has the tab, then if you type "All" for object selection, only those objects that present the tab's properties will be selected.

#### Command Usage:

The main reason for using "selection by filters" is to select specific objects that are among others in the Drawing without selecting them one by one.

#### Tips:

If you have a set of Layers that you need to isolate frequently, then if you select them from the "Layer" field of the tab, you can quickly redefine them in each new use of the command by simply typing "Y" and Enter when the tab opens.

The above setting is saved for all commands that use the tab.

---

#### Article 12: sdbox: Witnessing

**Original:** https://www.sdtopocad.net/index.files/EXASFALISEIS_EN.htm

## Witnessing (Control Points / Ties)

SDBOX CAD add-on “ workflow for producing a witnessing sheet in a Layout, using viewports, blocks and automated annotations.

### Overview

This workflow helps you document and witness survey control points and reference features (e.g., stations, trigonometric points, manholes, corners of walls/buildings, etc.) in a clear, printable sheet.

The standard output is created in a Layout and consists of:

- A predefined Witnessing Frame (title and table fields)

- Up to four (4) witnessing viewports with point labels and descriptions

- Witnessing lines (usually dashed) drawn on a dedicated layer

- Witnessing dimensions written as plain text and computed with a scale multiplier

#### Recommended workflow

- Insert the witnessing frame in the Layout ( ZTITLOI ).

- Create each witnessing viewport and fill the block attributes ( ZVPLK ).

- Draw the witnessing lines ( LD1 ).

- Add witnessing dimensions ( ZDEXASF ).

#### Tip

Always start these commands from the Layout when the sheet is intended for printing. This ensures consistent viewport scaling and correct annotations.

### Insert Witnessing Frame ZTITLOI

Inserts the witnessing sheet frame in a Layout and prepares the space where new viewports, dimensions and the table will be produced.

#### What it does

- Inserts the predefined witnessing frame in the current Layout .

- Provides fields for project data (filled once, then reused).

- Defines the area where the witnessing viewports and table entries will be created.

Witnessing frame inserted in a Layout.

#### Notes

The Drawing No. field typically refers to the sheet/page number within your project set.

For more information about titles and title-block insertion, see: Titles & Legends .

Project data and frame fields (entered once and reused).

Witnessing sheet prepared for up to four (4) witnessing viewports.

### Witnessing Viewports (Survey Points) ZVPLK

Creates a new witnessing viewport in the Layout , then switches to Model space to select the point/block and define the view center and scale.

#### Steps

- Start the command from the Layout .

- Define the rectangle of the new Viewport using the two reference points already present in the witnessing frame.

- The command switches to Model : select the control point Block .

- Set the viewport center and display scale so the control point and surrounding reference features are clearly visible.

- Confirm or fill the required attributes (e.g., code/ID, description, chainage where applicable).

Defining the new viewport rectangle in the Layout.

Selecting the point/block in Model space.

#### Notes

The suggested viewport scale depends on the drawing and the density of features. In many cases a scale around 1:500 provides a readable result.

For detailed information about viewports and this workflow, see: Viewports in Layout (ZVPLK) .

Witnessing titles/attributes filled automatically.

Attributes for the witnessing sheet (example).

Additional attribute lines (example).

#### Tip

The second attribute line can be used to store and print Chainage (or any project-specific reference) automatically, if your sheet template is configured accordingly.

Example of an automatically created witnessing viewport.

After the viewport is created and the frame fields are filled, continue with witnessing lines and witnessing dimensions.

### Witnessing Dimensions ZDEXASF

Writes witnessing dimensions as plain text using user-selected points and a suggested multiplier, so the printed dimension values match the viewport scale.

#### How scaling works

If your witnessing viewport is at scale 1:1500 , a typical multiplier is:

```text
1 / 1500 = 0.000667
```

This ensures that distances measured inside the magnified viewport are reported as real-world distances on the printed sheet.

#### Notes

The second point of each witnessing dimension can carry a code/number that is also reported automatically in the table, depending on your template setup.

For the full command documentation, see: Dimensions (ZDEXASF) .

### Witnessing Lines LD1

Draws dashed witnessing lines on a layer of your choice (recommended: Exasfaliseis ), connecting the control point to the witnessed features.

#### Usage

- Draw the lines as clean, readable ties from the point to the reference features.

- Keep the linework consistent across all witnessing viewports for easy review and printing.

#### Notes

For best results, use a dedicated layer (often named Exasfaliseis ) and a dashed linetype suitable for plotting.

More details about line drawing conventions: Drawing lines .

Example of witnessing lines drawn in the suggested layer.

#### Tip

The only remaining manual input is usually the feature description . Keep descriptions short and unambiguous (CAD plotting friendly).

---

#### Article 13: sdbox: Install and use

**Original:** https://www.sdtopocad.net/index.files/Egkatastasi_EN.htm

## Installation - Usage

SDBOX Design Software - Installation and usage guide for the SDBOX CAD add-on for AutoCAD, BricsCAD, progeCAD, GstarCAD and ZWCAD

This guide describes the installation and first startup of the SDBOX trial version, the alternative initial loading method, basic usage instructions and solutions to common installation issues.

### Installation Instructions

#### 1. Download and installation

Follow these steps:

- Download the SDBOX trial version for the CAD you use from the SDBOX Free Trial page .

- Save the SDBOX_Demo_*CAD_*.exe file wherever you prefer.

- If the CAD is open, close it and run the installation file.

- The main installer installs the basic SDBOX files. During installation, additional windows open in sequence to download and install the larger auxiliary files.

- Wait for all installation stages to finish. Downloading the auxiliary files may take a few minutes, depending on the speed of your Internet connection.

- If the download or installation of the auxiliary files is interrupted , open the *\SDBOX folder and double-click zzDownloadZips.exe at any time. This completes the download directly and is usually faster.

- An automatic check for the latest available SDBOX version is then performed. If a newer version is available, it is downloaded and installed automatically. During this stage, additional installation windows may also open briefly.

#### Reinstallation / upgrade

A newer SDBOX version can be installed directly over the existing installation.

If you have modified SDBOX files and want to preserve your changes, first follow the instructions for preserving existing files .

Watch installation tutorial video

### FIRST STARTUP

When you open the CAD for the first time after installation, SDBOX loads automatically.

Wait for the initial loading to complete. SDBOX is ready when its Ribbon tabs or the =sdbox= menu appear.

Once SDBOX has loaded, checks for new versions and subsequent updates are performed automatically whenever a newer version is available.

In every drawing where you want to use SDBOX, select “Load SDBOX” from the =sdbox= Ribbon tab or from the menu.

If SDBOX does not load automatically the first time you open the CAD, see the alternative initial loading method: AutoCAD · BricsCAD · progeCAD · GstarCAD · ZWCAD

If repeated security messages appear while using SDBOX, set the CAD security level to Low .

### USING SDBOX

In every drawing where you want to use SDBOX, select “Load SDBOX” from the =sdbox= Ribbon tab or from the menu. After loading, the SDBOX commands are available in the current drawing.

#### COMMAND EXECUTION:

You can run SDBOX commands in the following ways:

- From the =sdbox= Ribbon or the SDBOX Menu. Commands are organized into categories according to their purpose and function.

- From the CAD Command Line. At the end of each command description in the Menu, its abbreviation is shown and can be typed directly in the Command Line. Most abbreviations work in both Greek and English. Where numeric input is expected, English characters are used to avoid confusion between the decimal point and comma.

- From the available SDBOX Toolbars. You can open the Toolbars from the Menu, where “Toolbar” is indicated, or from the CAD toolbar management. The main SDBOX Toolbars are numbered so that they appear in the order of the corresponding SDBOX categories. Additional Toolbars are also available for use during specific commands.

### SYSTEM REQUIREMENTS

For SDBOX to operate correctly, the following are required:

- Windows 10 or Windows 11.

- A full CAD version: AutoCAD 2016+ / BricsCAD V20+ / progeCAD 2026+ / GstarCAD 2021+ / ZWCAD 2021+.

- The Windows Notepad application.

- The decimal separator must be set to the period “.” .

#### Note:

Several commands create auxiliary files in the folder of the drawing in which they are executed. Do not delete these files, as they are used by SDBOX.

Examples of such files:

- World File files : Georeferencing files created by the corresponding image import and export functions.

- *.MLL : Contains data required for using the “drawing with points” option.

- *.zzview : Contains the names of viewports defined with the ZVM command and used by ZVV.

- *.zvk : Contains data for numbered columns, used for retrieval with the ZVK command.

- *.zvbl : Contains data for opening tags, used for retrieval with the ZVBL command.

- *.yli : Contains the materials list for the NNP command.

---

#### Article 14: SDBOX FAQ - Product, Installation, Licensing & Workflows

**Original:** https://www.sdtopocad.net/index.files/FAQ_EN.htm

## Frequently Asked Questions

Practical answers about SDBOX, installation, licensing, workflows and everyday use

### Product & Compatibility

SDBOX is a professional CAD add-on for surveying and engineering drawing production. It works inside the CAD environment and brings together survey plan drafting, terrain modeling, maps and geospatial workflows, set-out preparation, building survey tools, CAD productivity and print-ready output.

View the SDBOX Product Overview .

SDBOX is available for AutoCAD, BricsCAD, progeCAD, GstarCAD and ZWCAD .

Current general requirements are: AutoCAD 2016+, BricsCAD V20+, progeCAD 2026+, GstarCAD 2021+ and ZWCAD 2021+. Recent full CAD versions are recommended for the best compatibility and functionality.

A full CAD version is required for full SDBOX functionality. Light, LT, Standard or otherwise restricted editions are not intended for the complete SDBOX workflow.

No. SDBOX can be used with both new and existing CAD drawings . A project may start from a survey point file, an existing drawing, a map background, a geospatial file, an image reference or other CAD project data.

No. SDBOX extends the CAD environment rather than replacing it. You can keep your normal drawing, editing, checking and plotting workflow and use only the SDBOX tools that are useful for the current task.

Yes. The generated drawing content remains standard, editable CAD geometry and annotation. Drawings can continue to be edited, checked, plotted and exchanged using normal CAD tools.

### Trial & Licensing

No. The Trial is intended to let you evaluate the real SDBOX workflows and is not a reduced-feature demonstration. The current Trial period is 30 days .

Download SDBOX Trial .

Everything already created remains in the drawing as normal CAD content. You can still open, edit, continue, plot and exchange the drawing. Only the SDBOX commands are no longer available after the Trial expires.

No. SDBOX is currently sold as a one-time purchase ; there is no annual subscription at present.

No. The same SDBOX installation is used for both Trial and licensed operation. After purchase, the existing installation is activated by license; a different program installation is not required.

The purchased version uses a portable USB Token. SDBOX may be installed on multiple computers — for example office, home and laptop — but one license operates on one computer at a time: the computer where the Token is connected.

The Token can be inserted or removed while CAD remains open.

The available editions include different workflow groups. Compare the current editions and included functions on the SDBOX website before purchase.

Compare editions .

### Installation & Updates

The main SDBOX program folder requires approximately 100 MB . In addition, SDBOX creates and uses C:\sdbox_Tools , which requires approximately 3 GB of free space on drive C:.

This is normal. The main installer installs the basic SDBOX files first. Additional installation windows then download and install the larger auxiliary components and any available SDBOX update.

Yes. Internet access is required during installation because the installer downloads the required SDBOX components. Internet access is also required for automatic updates, online documentation, online map workflows and external web resources.

No. Open the SDBOX installation folder and run zzDownloadZips.exe . It can resume and complete the download of the required auxiliary files.

Yes. A newer SDBOX version can be installed directly over the existing installation. If you have manually modified SDBOX files, preserve those changes first according to the installation documentation.

Yes. The installer checks for the latest available version during installation. After SDBOX has loaded successfully, future version checks and updates are performed automatically when a newer version is available.

Open the complete Installation & Usage guide .

### Starting & Using SDBOX

SDBOX should load automatically when the CAD application is opened for the first time after installation. Wait until the SDBOX Ribbon tabs or the =sdbox= menu appear.

SDBOX is loaded into each drawing when needed. Select Load SDBOX from the =sdbox= Ribbon tab or menu. After loading, the SDBOX commands are available in the current drawing.

Commands can be run from the SDBOX Ribbon , the SDBOX Menu , the CAD command line or the available SDBOX toolbars . Commands are organized by workflow and category.

No. Individual tools can be used independently. You can start with the workflow you need now — for example survey plan drafting, map backgrounds, DTM, building survey tools or PDF output — and expand gradually.

Yes. With a purchased USB Token license, SDBOX can be installed on multiple computers. The active license follows the USB Token and is used on one computer at a time.

### Workflows & Data

Yes. SDBOX includes tools for survey point import, existing conditions, boundaries, areas, coordinate tables, symbols, annotations, levels, terrain information, grids, statements and declarations, legends, title blocks, checking and print-ready PDF output.

Open the Survey Plan guide .

SDBOX works with processed coordinate point files , with fields such as Code, E, N, Z and Description . It does not perform raw GNSS or total-station observation processing or network adjustment; those measurements should first be converted to coordinate point data.

No. SDBOX can read elevation information from ordinary survey points and use the same point data for plan drafting, triangulation, breaklines, contours, longitudinal profiles, cross sections and volume calculations. A separate set of 3D point objects is not required.

Yes. SDBOX includes cut & fill volume calculations based on triangulated terrain surfaces, together with DTM, contour, profile and cross-section tools.

Open the DTM manual .

Not directly from the point cloud itself. SDBOX volume calculation works from two triangulated surfaces made of 3DFACEs , placed on different layers. Point-cloud data must first be converted or sampled into suitable CAD points or a triangulated surface.

SDBOX includes online map backgrounds, Google Earth workflows, georeferenced images, world files and GeoTIFF, KML/KMZ, SHP, DXF and JSON/GeoJSON exchange, location tools and related GIS/CAD workflows.

Open Maps in SDBOX .

Yes, depending on the SDBOX edition. Building survey workflows include floor plans, sections, elevations, architectural symbols, levels, dimensions, hatches, legends and print-ready output.

Yes, depending on the SDBOX edition. Set-out workflows include point and coordinate documentation, axis geometry, labels, checking dimensions, reference points and field-ready drawing information.

### Drawings, PDF & Privacy

Yes. SDBOX includes plotting tools, pre-set CTB pen tables for different scales and one-click PDF output for technical drawings.

Yes. SDBOX-generated content remains standard CAD content. The drawing itself is not locked to SDBOX and can still be opened, edited, plotted and exchanged normally.

No. SDBOX does not upload drawings, coordinates, project files, CAD files, geospatial files, images or other project data to SDBOX servers.

Internet connections are used for installation, updates, documentation and online resources requested by the user. See the SDBOX Privacy Policy .

Yes, when the selected workflow uses an online map, external website, online documentation or another Internet resource. Ordinary local CAD and drawing operations do not require every command to be online.

### Troubleshooting

Use the alternative initial loading procedure for your CAD platform. The Installation & Usage guide contains separate first-start links for AutoCAD, BricsCAD, progeCAD, GstarCAD and ZWCAD.

Open First Startup instructions .

Select Load SDBOX from the SDBOX Ribbon or menu for that drawing. Once loaded, the commands become available in the current drawing.

Follow the security guidance in the Installation & Usage guide for the CAD platform you are using. Where the CAD asks whether trusted SDBOX files may be loaded, allow the trusted files as required.

SDBOX requires the Windows decimal separator to be the period “.” . Check the Windows regional number settings if numeric input or file data is not being interpreted correctly.

Do not delete SDBOX auxiliary files if they are being used by the drawing. Some commands create files such as world files, *.MLL , *.zzview , *.zvk , *.zvbl or *.yli to store information required by specific SDBOX functions.

Make sure the correct SDBOX version is installed and connect the licensed USB Token. One USB Token license can be used on one computer at a time.

### Help & Learning

Start with the installation guide, then choose the workflow that matches your project. You do not need to learn all SDBOX commands before beginning.

Use the SDBOX Manual Portal and its Search / Quick links. Detailed command pages, workflow guides and videos are organized by category.

Email cad@sdtopo.net or use the contact form on the SDBOX website. When reporting a technical problem, include your CAD version, Windows version, SDBOX version and a short description of the issue; screenshots or sample drawings are helpful when relevant.

Open SDBOX Contact .

---

#### Article 15: sdbox: Calc

**Original:** https://www.sdtopocad.net/index.files/GIA_ARITHMOYS_EN.htm

## Numbers and Calculations

SDBox Design Software - Command guide for operations with numbers in texts, blocks, line lengths, areas, and distances in CAD drawings

### Operations on Text Numbers ZNM

Operations on texts (Text) that are numbers. You specify the operation, the number, and the decimal places to be displayed. You can select specific text types where the operation will be performed.

Performs mathematical operations (addition, subtraction, multiplication, division) on text objects that contain numbers. You can filter the texts by layer, style, etc.

ZNM command interface

#### Operation Parameters

- Operation: Selection of Operation (addition, subtraction, multiplication and division).

- Number: Entry of the number with which the operation will be performed on all texts.

- Decimals: Selection of the number of decimal digits to be displayed on screen in each text after the operation.

- Display "+" for positive: If you select this option then in each text that is a positive number, on screen it will be displayed with "+" at the beginning.

#### Object Selection

You can select objects using filters (Layer, Text Style, etc.).

Object selection with filters

The selection dialog for "selection based on filters" can be dismissed with Esc .

If you have a set of Layers that contain the number texts, then if you select them from the "Layer" field of the dialog, you can quickly redefine them in each new use of the command by typing "Y" and Enter when the dialog opens.

#### Notes:

When the command finishes, you are informed on how many of the selected texts the operation was performed. For those where it wasn't performed, they don't contain only numbers but also other types of text.

#### Command Usage:

The most common use of the command is when in some drawing or study the elevation origin changes and you need to add or subtract some number from all.

Besides Operations you can also use the ZNM command to change the decimals of texts that are numbers. This is done as follows: Select operation "+", number "0.000" and the number of decimals you want. So to each text 0.00 is added (i.e., its number doesn't change) and the decimals you have selected are set.

#### Tips:

You can also use this command to batch update the decimal precision of all numeric texts in a drawing without changing their values.

### Operations on Block Numbers ZNMB

Operations on Block Attributes which are numbers. You specify the operation, the number, and the decimal places to be displayed. You can select specific Attribute types or Blocks where the operation will be performed.

Performs mathematical operations on Attribute values within blocks. You can filter by block name or attribute tag.

ZNMB command interface

#### Operation Parameters

- Operation: Selection of Operation (addition, subtraction, multiplication and division).

- Number: Entry of the number with which the operation will be performed.

- Decimals: Selection of the number of decimal digits to be displayed on screen in each Attribute after the operation.

- Display "+" for positive: If you select this option then in each Attribute that is a positive number, on screen it will be displayed with "+" at the beginning.

#### Selection Options

Block type selection

After clicking OK you will be asked to select a Block from those on which the command will be executed to record its name. In the next selections of the command you will be able to select only Blocks that have this name. The operation will be executed on all Attributes of the selected Blocks.

Attribute type selection

After clicking OK you will be asked to select an Attribute of a Block from those on which the command will be executed to record its name. In the next selections of the command you will be able to select only Blocks (of any name) that have this Attribute. The operation will be executed only on the selected Attribute of whichever Blocks are selected.

Object selection prompt

After clicking OK the command continues waiting for you to select the Blocks in whose Attributes the operation will be performed.

#### Notes:

Useful for batch updating attribute values like room numbers, elevations, or quantities across multiple blocks.

### Operations with Distances D+D

Continuous operations with distances or numbers that you can type. Addition, Subtraction, Multiplication, Division, sign inversion, square root, percentage %, 1/x, exponent, and average of distances that you select on screen or numbers you type.

Interactive calculator that works with distances picked from the drawing or numbers typed at the command line.

#### How it works

The command waits for you to give the 1st distance or the 1st number that will participate in the operations.

- Distance: Given by 2 points on the drawing screen that define the desired distance.

- Number: You type some number.

After giving distance or number you must give the type of operation that will be done with the next number or distance. The command writes the last number or distance and waits for you to give the operation.

After entering the second value, the calculation is performed and the result is displayed:

Operations palette (click to open)

#### Command Usage:

Useful for quick calculations while drawing, like adding lengths, calculating percentages, or converting units.

### Operations with Objects L+L, P+P, A+A, T+T, S+S, LPATS, O+O, E+E

Operations with length (or E+E for areas) of objects in the Drawing, numbers from texts or dimensions, and distances on screen or numbers you type. Addition, Subtraction, Multiplication, Division, sign inversion, square root, percentage %, 1/x, exponent, and average.

Comprehensive calculator that can use lengths of drawing objects, text values, dimension values, or typed numbers.

#### Available Commands

- L+L: Selection of only objects of type Line.

- P+P: Selection of only objects of type Polyline.

- A+A: Selection of only objects of type Arc.

- T+T: Selection of only objects of type Text.

- S+S: Selection of only objects of type Spline.

- O+O: Selection of only objects of type Dimension (that have real value).

- LPATS: Selection of all of the above.

- E+E: Selection for their area of only objects of type Pline, Spline, Arc, Circle, Ellipse.

Operations palette (click to open)

#### Data Type Selection

After entering the operation, you're asked how you will select the numbers that will participate in the operation.

Data type selection

- X: Cancel at this point and reselect Operation.

- Distance: Selection of distance on screen with 2 points.

- Number: You select on screen Text or Block that contain a number or type a number.

- Select: Selection of objects whose length (or area for E+E) or content will participate in the operation.

#### Object Selection

When selecting objects:

Object selection with filters

The selection dialog for "selection based on filters" can be dismissed with Esc and you can continue the command.

If you have a set of Layers that contain the objects you often use in the command, then if you select them from the "Layer" field of the dialog, you can quickly redefine them in each new use of the command by simply typing "Y" and Enter when the dialog opens.

#### Examples

Example T+T (Text addition):

Example A+A (Arc length addition):

Example E+E (Area addition):

#### Notes:

The command reports which objects couldn't participate (zero length, no numbers in text, etc.) and provides a summary of the calculation.

#### Command Usage:

At the point in the command where you are asked to give an operation, it is suggested that you select the operation with the mouse from the corresponding palette and not type it for better flow of the command.

#### Tips:

When drawing texts with numbers inside phrases which you want later to participate in operations, be careful not to write in these phrases other numbers before the one you want to be calculated.

For example, if you select for participation in an operation text with the phrase "E2a= 10.55 sq.m." then from the analysis of the phrase the command will distinguish the number "2". You could write "Ea'= 10.55 sq.m." or something else and then the number "10.55" will be selected.

The command distinguishes the 1st number it finds inside a phrase so after that you can write whatever you want.

### Broken Length DDD

You select with points on screen a path of which the total length is calculated. The path is drawn temporarily on screen. In the final calculation each individual distance is also displayed. You also have Undo capability during point selection.

Calculates the total length of a polygonal path by picking points sequentially. Useful for measuring irregular perimeters.

#### How it works

The command waits for you to pick points on the drawing that define a path. A temporary polyline is drawn as you pick points.

Undo capability: The last point you gave is cancelled and the last distance will not participate in the final calculation of the total length. (Accordingly the temporary drawing of the path changes while the last distance that was cancelled appears with a dashed red line.)

#### Command Usage:

Useful for measuring the total length of complex, non-linear paths like site boundaries, piping routes, or electrical runs.

### Result Annotation on Screen ZP2T

Definition of settings for annotation of the result or the entire operation on screen. You can, if you want, have Operations annotated on screen (Operations with numbers, with block, with objects, with surfaces, broken length).

Configures how calculation results are displayed on the drawing. Can show just the result or the full calculation.

ZP2T settings interface

#### Options

- Annotation of result or the entire operation

- Multiplication of result with factor

- Text before and after the number

- Text size

- Decimals

- Text or Mtext

After entering the result on screen you can move it to the desired position.

#### Command Usage:

Configure once how you want calculation results to appear, then all subsequent calculations will use these settings for consistent annotation style.

### Slope Calculation KL

Slope calculation between 2 points giving for each a numeric value or selection of some number from the Drawing (Text or Block) or selecting the Z of some point. After the slope is calculated you have data for new points.

Calculates slope between two points with elevation values, then allows extrapolation to other points.

You are asked to give the 1st point of which the elevation will be recorded (for calculation of the elevation difference with the next point) and the x,y,z coordinates (for calculation of the distance with the next point).

You can select A, Z or P for the selection method.

Elevation calculation (click for details)

Slope calculation interface - part 1

#### Slope Calculation Interface

Initially: The initial values as you selected them on screen are set in the corresponding fields. This option exists because you can type other value in the fields "====> SLOPE:" and "... from A" of the 1st section for the calculation of the new point C and later you may want to restore their initial values.

... from A: The elevation of the 1st point is displayed. You can change this value by typing a new value for the calculation of the new point C. If you want to restore the initial value press the "Initially" button.

... to B: The elevation of the 2nd point is displayed.

SLOPE: The slope as calculated from the selections on screen and the distance you gave is displayed. You can change this value by typing a new value either for the calculation of a new point (Point C) or for the annotation of the initial slope on screen. If you want to restore the initial value press the "Initially" button.

Distance: The distance of the 2 points you selected on screen as measured or with the new value you gave before opening the dialog.

ΔH=: The elevation difference of the 2 initial points you selected on screen.

#### Point [C] calculation at distance from [A]:

<== You are transferred to the drawing screen where you select some point (point C) with the mouse at which its elevation (H) will be calculated based on its distance (and direction) from A and the initial slope as displayed in the dialog.

For the distance A-C the distance of the projection of point C on the line AB is calculated.

When the new point C is in opposite direction from A->B then the slope for C is calculated opposite.

As long as you select the new point C the dialog reopens and the distance A-C is displayed in the corresponding field "Distance:".

Slope calculation interface - part 2

#### Calculation Results

On Drawing: Zγ= You are informed if the point you selected on screen had Z. This value does not affect the calculation of the final H.

Go: The values in the corresponding fields for the calculation of the final H of point C (which you selected on screen) are displayed.

Slope: The slope with the value that participates in the calculation of the final H of point C. The slope value is what is defined or what you have written in the field "Slope:" of the 1st section of the dialog.

ΔH: The elevation difference AC. You can correct it or write something else and this will be written on the drawing screen.

Final H: The final H of point C. You can correct it or write something else and this will be written on the drawing screen.

#### Annotation of slope on Drawing

You have the ability to select whether and what will be annotated on the drawing screen for the initial slope or the data of point C.

Initial Slope: After clicking "OK" the initial slope (that was calculated from the 2 initial points or what you have written in the field "SLOPE:") is written on screen. On screen the slope is written as text (Text) in the direction AB and in the middle of the distance AB.

Calculated Slope: The slope with which the H of point C was calculated is written on screen. (This slope is what was defined or what you have written in the field "slope:"). On screen the slope is written as text (Text) in the direction AC and in the middle of the distance AC.

with "%": To whichever of the 2 above slopes you have selected to be written on screen the symbol "%" is added at the end (e.g., "-72.187 %").

with "-->": To whichever of the 2 above slopes you have selected to be written on screen an arrow in the direction of the 2 points is drawn below the text of the slope.

#### Annotation of calculated H and ΔH

You have the ability to select to annotate the H and ΔH that have been calculated for point C.

Calculated H: After clicking "OK" the calculated H of point C or whatever else you have written in the corresponding field is written on screen. On screen it is written as text (Text) above point C.

Calculated ΔH: After clicking "OK" the calculated ΔH of point C or whatever else you have written in the corresponding field is written on screen. On screen it is written as text (Text) below point C.

"+" for positive: "+" is added at the beginning of every positive number from the above that you select to be written on screen.

Help: Displays help for the command.

OK: What you have selected is written on screen and you are informed on the Command Line for the results.

Slope calculation example

#### Command Usage:

Essential for civil engineering and surveying work where you need to calculate slopes between points and extrapolate elevations to other locations.

### Area Calculation ZAA, ZAAS

Area calculation of closed area with selection of central point on screen or selection of Pline (ZAA) or selection of the points that define the surface (ZAAS).

Calculates area of closed regions either by picking inside a boundary or by selecting points.

Area calculation example

#### ZAA vs ZAAS

- ZAA: You select a point on screen, the area of closed region is calculated (with the same logic as when you put Hatch or draw Boundary) and then you have the ability to annotate the area on the drawing screen. You also have the ability to select Pline. If closed shapes are found inside the area there is capability to subtract them from the surface.

- ZAAS: You select one by one the points that define the surface. The shape is drawn temporarily on screen and the elements are calculated as if it were a closed Polyline.

Text Height is set automatically according to the print scale.

Below the procedure of ZAA is presented:

#### ZAA Procedure

You select a point on screen, within the closed region of which you want to calculate the area or select a closed Polyline. If another closed shape is found inside the area then it is suggested to subtract its surface.

Area example

If no external closed region is found the following message appears:

No closed area found message

Possible reasons:

- When you select a point near some vertex (instead of the middle) of the closed region AutoCAD analyzes the objects more easily and determines the closed region.

- If not all of the region appears on screen AutoCAD cannot determine it.

- If the Drawing consists of many objects then for the determination of the closed region it is better for as few objects as possible to appear on screen and for this reason to zoom in the closed region before selecting point.

- The region, within which you select point, is not closed. You can examine the perimeter of the region and correct the segments that need to close the perimeter.

- If the closed region contains 3D points along the perimeter then the area cannot be calculated.

If a closed region is found then the command continues giving the data of the region and the option of annotation of the area on screen.

#### Command Usage:

If you want to also have the ability to import the vertices and the lengths of the sides of the closed region use the command ZID or ZIDS .

#### Tips:

The command ZAA, with selection of point in the center, works with the Hatch logic of AutoCAD or drawing Boundary. So where you can put Hatch you can also do area measurement.

It is suggested to use ZIDS instead of the corresponding one of AutoCAD, because you can see the boundaries of the surface on screen and do Undo during point selection.

### Numbers-Text from Selection BVC

Annotation of texts on the drawing screen with ability also of selection of value from Block, Text or Xref. You can set fixed prefix or suffix during annotation. For annotation of numbers you can set multiplier and decimals. Text Height of the texts is set automatically according to the print scale.

Creates text annotations by typing, selecting existing text/attributes, or through calculations.

BVC command interface

#### Initial Setup

The 1st time you run the BVC command in some drawing the above dialog opens where you select restrictions during selection of values from Block in the Drawing.

If in the same drawing you want to be asked for the above type DBVC before running the BVC command.

Block selection settings (click for details)

#### Text/Number Input

You can:

- Type some text or number: You write the text and then place it on the drawing screen as text.

- Press Enter or right click and select some text, or Attribute of a Block or object from Xref on screen.

- Type "@" and do calculations and operations for number.

##### a. If you type some text:

You write the text and then place it on the drawing screen as text.

##### b. If <ENTER=Pick>:

You select on the drawing screen with the mouse text from Block or Xref or Text and then place it on the drawing screen as text.

##### c. If [@ = calculations]:

If you type "@" you can do calculations and operations for numbers and then the final number is placed on the drawing screen as text.

Calculations and operations (click for details)

As long as you select text or number with one of the 3 above ways the command continues for the annotation of the selection on screen as simple Text.

At the end of the command you are informed of the number of new phrases or numbers that were added to the Drawing with the command.

#### Command Usage:

With the BVC command you have the ability to insert phrases or numbers with ability of selection of others from the Drawing (Text, Block or Xref) and all these to be written in the same way (Text Style, Layer and size) on the Drawing as new texts.

You can even do complex calculations for determination of the number that will be annotated as text on the Drawing.

### Refresh Selection Data DBVC

The selections for which Blocks or Attributes will participate in the BVC command are refreshed.

Resets the selection filters for the BVC command, forcing it to ask for block/attribute restrictions again.

#### Command Usage:

Use when you want to change the block/attribute selection criteria for the BVC command in the current drawing.

---

#### Article 16: sdbox: Blocks

**Original:** https://www.sdtopocad.net/index.files/GIA_BLOCKS_EN.htm

## CAD Blocks Management

SDBox Design Software - Command guide for insertion, editing and management of Blocks in CAD drawings

### Insert Fixed Dimension Symbols ASD

Insertion of symbols (Blocks) from a Library in the dimensions they were designed. You can enrich the library with your own Blocks.

Selection of Block from a symbols library for insertion in the drawing screen with point and rotation angle.

These symbols are inserted into the Drawing exactly as they were designed (regardless of the print scale of the Drawing they are inserted into) and are usually architectural symbols for Plan, Section and Elevation.

You can enrich the library with your own symbols and use them easily in any Drawing.

You can set the symbols library to be read from a shared folder on a network so that many users can use and enrich the same library.

ASD command interface for block selection

#### Subdirectory

This list shows the names of the subfolders contained in the ASD folder.

Each subfolder constitutes a different category of symbols and contains Drawings (*.dwg) that are the symbols.

When you select a category, the adjacent lists "Symbols" and "Slides" display the names of the Drawings contained in the selected subfolder-category.

You can create new folders via Windows inside the ASD folder to contain Drawings (*.dwg) for insertion into the Drawing as symbols.

#### Symbols

This list shows the Drawings (*.dwg) contained in the selected subfolder-category from the "Subdirectory" list.

From this list you can select the symbol to be inserted into the Drawing.

When you click on a Drawing, the corresponding Slide becomes highlighted in the adjacent "Slides" list.

With a double-click you are automatically transferred to the drawing screen for insertion of the selected Symbol.

#### Slides

This list shows the corresponding Slides (*.sld) contained in the selected subfolder-category from the "Subdirectory" list.

When you create a new Drawing-symbol in a subfolder, create also the corresponding Slide of the symbol, with the AutoCAD mslide command, giving it the same name as the symbol.

For Drawings-symbols that do not have slides, the indication "No Slide" appears in the corresponding position.

#### General Directory

The command ends (no symbol is inserted) and opens the ASD folder containing the subfolders-categories of symbols.

In the ASD folder you can create new subfolders-categories with Drawings that will be inserted as symbols with the command.

You can open this folder also outside the command with the ASDDIR command.

#### Open Folder

The command ends (no symbol is inserted) and opens the subfolder-category you have selected in the "Subdirectory" list and displayed in the "Symbols" list.

The folder that opens contains the drawings-symbols (*.dwg) and the corresponding Slides.

You can rename a Drawing or create a new one.

When you rename a Drawing, rename also the corresponding Slide.

When you create a new Drawing, create also the corresponding Slide with the AutoCAD mslide command.

#### Notes:

When you create a new Drawing-symbol you can set the insertion point with the AutoCAD base command.

Each subfolder can contain a maximum of 63 Drawings.

If you have more Drawings in a category, you can create a new subfolder (with name **-2) to contain them.

#### Command Usage:

The selections you make each time with the ASD command are saved and suggested from then on when you run the command again in the same Drawing or in any other.

If you agree with what is suggested (as the last selection) when opening the tab, you can press Enter or Space to accept them and continue with symbol insertion in the Drawing screen.

#### Tips:

You can create as many subfolders-categories as you want.

The ASD command reads only drawings that exist in subfolders of the ASD folder.

Plain drawings that exist inside the ASD folder cannot participate in the command.

The command name ASD is an abbreviation of "Architectural Symbols into the Drawing".

### Change Directory for Fixed Dimension Symbols ASDCHDIR

Definition of the Directory where the folders with fixed dimension Blocks are located. This Directory is read by the command and opens a tab with the Blocks for insertion. The Directory can also be network.

You define a new address for the ASD folder containing the subfolders-categories of fixed dimension symbols.

You can set the symbols library (ASD folder) to be read from a shared folder on a network so that many users can use and enrich the same library.

Dialog for changing the ASD library directory

To change the address of the ASD library you simply need to open (with the above window) the ASD folder in whichever address you have placed it.

Once you open the folder, without selecting anything else with the mouse, and press Save, the address is recorded and this is set as the library address used by the ASD command.

In the File Name position is written "Do not change anything here!" to remind you that after opening the ASD folder you do not need to select any file or anything else, just press Save.

#### Tips:

You can change the ASD address as many times as you want and within the same Drawing.

The general ASD folder can have another name of your preference.

You can open the ASD folder with the ASDDIR command at any time in the Drawing.

### Open Fixed Dimension Symbols Folder ASDDIR

Opening of the Directory containing the folders with fixed dimension Blocks. You can with new folders shape the categories or copy new Blocks.

When you type ASDDIR in the drawing, the folder (General Directory) that is defined as the library of subfolders-categories for the ASD command opens (via windows).

In the folder that opens you can create new subfolders where to transfer or create new drawings and slides.

#### Notes:

In the folder that opens you can transfer or create new folders of your own with drawings and slides which will automatically participate in the ASD command.

#### Command Usage:

Apart from creating or transferring new subfolders, drawings and slides, you can use the ASDDIR command to have an overview or confirm the address used by the ASD command.

### Insert with Directory Selection ASDA

Insertion of symbols (Blocks) in the dimensions they were designed. The selection is made from a Windows window and you can select any drawing for insertion.

Selection of Block from any address of the computer or network for insertion in the drawing screen with point and rotation angle.

These symbols are inserted into the Drawing exactly as they were designed (regardless of the print scale of the Drawing they are inserted into).

File selection dialog for ASDA command

#### Notes:

When you create a new Drawing-symbol you can set the insertion point with the AutoCAD base command.

#### Command Usage:

The file address you choose to insert into the drawing as a symbol with the ASDA command is saved and suggested from then on when you run the command again in the same Drawing or in any other.

#### Tips:

You can insert a symbol into the Drawing from any address of your preference.

The ASDA command is not related to the fixed dimension symbols library address of the ASD command.

The command name ASDA is an abbreviation of "Architectural Symbols into the Drawing from Any directory".

### Open Folder of Last Used ASD Block ASDADIR

Opening of the folder containing the fixed dimension Block that was last inserted with the ASDA command.

When you type ASDADIR in the drawing, the folder containing the Symbol (*.dwg) that was selected the last time in any drawing for insertion with the ASDA command opens (via windows).

In the folder that opens you can create new subfolders where to transfer or create new drawings.

Folder opened by ASDADIR command

#### Notes:

Same as for the ASDA command.

### Insert Scaled Symbols MBL

Insertion of symbols (Blocks) from a Library in size proportional to the print scale. You have the ability to type points, set rotation and insertion factor. You can enrich the library with your own Blocks.

Selection of Block from a symbols library for insertion in the drawing screen with point.

These symbols are inserted into the Drawing with size proportional to the print scale so that they print clearly.

You can enrich the library with your own symbols and use them easily in any Drawing.

You can set the symbols library to be read from a shared folder on a network so that many users can use and enrich the same library.

MBL command interface for scaled block insertion

#### Drawing with point typing

You can select the Blocks that will participate in the command and which Attribute contains the codes you will type during Drawing.

Details

#### Update for 3D points

If you select this field then during drawing you will be notified when you select a point that does not have Z=0.00.

During drawing you have many possibilities for point construction.

Details

#### Notes:

Regarding the rest of the tab, the same as for the above ASD command apply.

### Change Directory for Scaled Symbols MBLCHDIR

Definition of the Directory where the folders with scaled Blocks are located. This Directory is read by the command and opens a tab with the Blocks for insertion. The Directory can also be network.

You define a new address for the MBL folder containing the subfolders-categories of symbols.

You can set the symbols library (MBL folder) to be read from a shared folder on a network so that many users can use and enrich the same library.

#### Notes:

Same as for the ASDCHDIR command.

### Open Scaled Symbols Folder MBLDIR

Opening of the Directory containing the folders with scaled Blocks. You can with new folders shape the categories or copy new Blocks.

When you type MBLDIR in the drawing, the folder (General Directory) that is defined as the library of subfolders-categories for the MBL command opens (via windows).

In the folder that opens you can create new subfolders where to transfer or create new drawings and slides.

#### Notes:

Same as for the ASDDIR command.

### Scaled Symbols with Directory Selection MBLA

Insertion of symbols (Blocks) in size proportional to the print scale. The selection is made from a Windows window and you can select any drawing for insertion.

Selection of Block from any address of the computer or network for insertion in the drawing screen with point and rotation angle.

These symbols are inserted into the Drawing with size proportional to the print scale so that they print clearly.

#### Notes:

Same as for the ASDA command.

### Open Folder of Last Used MBL Block MBLADIR

Opening of the folder containing the scaled Block that was last inserted with the MBLA command.

When you type MBLADIR in the drawing, the folder containing the Symbol (*.dwg) that was selected the last time in any drawing for insertion with the MBLA command opens (via windows).

In the folder that opens you can create new subfolders where to transfer or create new drawings.

#### Notes:

Same as for the ASDADIR command.

### Insert-Export Blocks with Sequential Names ZZB

Insertion of Block into the Drawing with simultaneous export to a file and multiple naming possibilities during insertion and drawing on the screen.

You have the ability to use the command from simple insertion of symbols with sequential numbering and fixed elements, up to complex use with export of the insertion coordinates to a file with predefined elements.

ZZB command interface part 1

Details link for coordinate export

#### Command Usage:

Used for systematic insertion of blocks with attributes that need to be recorded in external files for further processing.

### Number in Circle NNAR

Placement of Circle Block with number with sequential numbering.

Automatic numbering during the command and ability to select the increment units of the numbering.

You insert the Block, a number is given and you move it to its final position.


The size of the Blocks is set automatically according to the print scale.

Example of numbered circles

NNAR command dialog

#### Notes:

If you want to insert a Block with simple or complex alphanumeric phrases in a circle, square or rhombus then use the ZZB command.

In case you have already inserted a Block with the command and want to add some number to all (or perform any operation) use the ZNMB command.

#### Command Usage:

You can set as large numbers as you want. The command is designed so that any number always fits inside the circle.

### Insert Circle Symbol ZKYK

Insertion of Block in a circle with size proportional to the print scale and with selection from a library. In the library you can also set explanations for each Block.

Selection of Block from a symbols library for insertion in the drawing screen.

These symbols are inserted into the Drawing with size proportional to the print scale so that they print clearly.

You can enrich the library with your own symbols and use them easily in any Drawing as for each Block you can give a description to remind you of its use.

ZKYK command details interface

### Insert Symbol in Plate ZTET

Insertion of Block in a plate with size proportional to the print scale and with selection from a library. In the library you can also set explanations for each Block.

Selection of Block from a symbols library for insertion in the drawing screen.

These symbols are inserted into the Drawing with size proportional to the print scale so that they print clearly.

You can enrich the library with your own symbols and use them easily in any Drawing as for each Block you can give a description to remind you of its use.

ZTET command details interface

### Insert North or Arrow Symbol ZBOR

Insertion of North or arrow Block in the drawing screen with size proportional to the print scale and with selection from a library.

Selection of Block from a symbols library for insertion in the drawing screen.

These symbols are inserted into the Drawing with size proportional to the print scale so that they print clearly.

You can enrich the library with your own symbols and use them easily in any Drawing as for each Block you can give a description to remind you of its use.

ZBOR command details interface

### Count Block-Xref ZBLK

Opens a file that includes the Blocks and Xrefs that exist in the Drawing with their count.

The command counts all the Blocks or Xrefs that exist in the Drawing and displays them in the file "KATAMETHRHSH_BLOCK_SXEDIOY.zblk" sorted by name and with a number corresponding to how many times each exists in the Drawing.

Example of block counting output

For Blocks that show the number 0 (count) it means that this Block was once inserted into the Drawing, has been deleted and has remained as an entity in the AutoCAD library so that it can be reinserted if needed.

#### Notes:

The command can be used as many times as you want in the Drawing.

Each time it opens, and in each drawing it opens the same file "SDBOX\KATAMETHRHSH_BLOCK_SXEDIOY.zblk".

If you want you can save it (Save As) to an address of your choice with another name for any use of yours.

#### Command Usage:

- To have an image of which and how many Blocks exist in the Drawing.

- If a Block exists in the Drawing.

- If you want to copy the name of a Block for use in another command.

#### Tips:

If after opening the file you save it (Save As) to an address of your choice then the information at the beginning of the file reminds you when and from which Drawing the file originated.

### Symbols Legend ZYPBL

Legend of which types of Block are selected from the Drawing.

A List is created on screen (in legend form) where the various types of Block that you have selected are displayed according to Block Name, size, Layer, Color etc. and explanation for each Block.

ZYPBL command details interface

### Edit Attribute in Block ZZATT

Editing of Attribute contents in Block. Conversion to Uppercase or lowercase, addition of phrases at the beginning or end, change of phrases, changes to Color, Layer or TextStyle.

The command is executed simultaneously on the desired Attributes of the selected Blocks.

ZZATT command details interface

### Change Tag Name ZZTAG

Editing of Attribute names (TAG) in Block. Conversion to Uppercase or lowercase, addition of phrases at the beginning or end, change of phrases.

This command is useful when you want to change the names of the Attributes in some Block so that you can handle them later collectively.

ZZTAG command example

For the use of the command the same as for the above ZZATT command apply with the difference that some fields are disabled.

### Change Block Texts DDE

Editing of contents, Texts (Text, Mtext), Attributes of a Block, dimension values (Dimensions) and Rtext.

The command was originally created for Acad 2000 with the aim of being the same command that edits Text contents, Block and Dimension.

Details

### Match Block Scale ZMSB

You select the Block that has the desired X, Y, Z Scale and then the Blocks that you want to acquire the same Scale.

This command is often used when same type Blocks have been inserted into the Drawing with different sizes. Once they all acquire the same size you can use them collectively in other commands.

Note: When asked to select the Block with the desired X, Y, Z Scale you can instead of selecting a Block simply type a number which will be transferred to all 3 scales.

### Block Table ZPBL

A table is drawn on screen in whose columns the contents of selected Attributes and the coordinates of the Blocks you select are displayed.

The process is the same in the various versions of the command and the only difference is in the suggested Blocks that are selected, the Attributes that are recorded and the title of the Table, which are saved and suggested in each new use per version.

ZPBL command details interface

### Export Block ZXBL

Block elements are exported to a file where each row contains the contents of the desired Attributes and the coordinates of the Blocks you select.

The process is the same in the various versions of the command and the only difference is in the suggested Blocks that are selected, the Attributes that are recorded and the file, which are saved and suggested in each new use per version.

Details

### Copy Xref to Folder ZCCXR

The drawings that exist as Xref in the present Drawing are copied to a Directory of your choice. (Note: The command works also on networks.)

This command is usually used, among others, when you want to deliver a drawing that has Xrefs located in various Directories and these to be transferred to the same folder.

Once you copy them to the folder of your choice you can set your drawing to read them from there with the following command ZCXRD.

#### Note:

When, via the Windows window, you are asked to indicate the new Directory, do not select a specific Drawing or other file, just press Save and the address will be set.

### Change Xref Search Directory ZCXRD

If you want to change the search Directory of Xrefs, in case the Drawing does not read them or in case you want them to be read from elsewhere, you select which of the Xrefs will participate and you simply indicate the new Directory via a Windows window.

Select in the drawing screen based on filters the Xrefs you desire:

Filter-based selection interface

Xrefs that are not found in the new Directory, nothing changes for them.

Anyway at the end of the command you are informed about how many were found and changed Directory.

ZCXRD command dialog

#### Note:

When, via the Windows window, you are asked to indicate the new Directory, do not select a specific Drawing or other file, just press Save and the address will be set.

### Hide - Show Xref ZFXR

Unload and Reload Xref with their selection in the drawing screen.

You select in the drawing screen which Xrefs will remain and those you did not select become Unload.

Usually the command is used to lighten the Drawing when it has many Xrefs or to show and hide alternately the Xrefs with selections on screen and not from the AutoCAD window.

---

#### Article 17: sdbox: Lines

**Original:** https://www.sdtopocad.net/index.files/GIA_GRAMMES_EN.htm

## Line Design and Editing Commands

SDBox Design Software - Comprehensive tools for creating, modifying, and managing lines, polylines, arcs, and splines in CAD drawings

### Introduction

Design and edit lines (Line, Pline, Arc, Circle...) with specialized CAD tools.

SDBox provides over 150 different line types for drawing Lines, Polylines, or Arcs with line type selection. During drawing, you can create points, type coordinates, input point sequences, and get informed about 3D points. The LineType Scale is set automatically according to the print scale.

#### Platform Support:

These commands work with AutoCAD 2010-20xx, BricsCAD, GstarCAD, and ZwCAD.

### Drawing with Line Selection ZLL

Draw ~150 different line types for Line or Pline or Arc with line type selection.

During drawing you can create points, type coordinates, input point sequences, and get informed about 3D points. The LineType Scale is set automatically according to the print scale.

#### Features

- Select from approximately 150 pre-defined line types

- Automatic LineType Scale adjustment based on plot scale

- Point creation during drawing process

- Coordinate input via keyboard

- 3D point detection and notification

- Support for custom linetypes with letters

Line type selection dialog with custom options

#### Layer Selection:

You can choose the layer for new lines. Details about layer selection

#### Custom Linetypes:

You can define line types with letters of your choice. For example, for the letter A: ----- A ----- A -----

These are useful for specialized annotations and markings.

#### Point Creation During Drawing

You can select which Blocks participate in the command and which Attribute contains the codes you type during drawing. Details

#### 3D Point Notification

If you select this option, during drawing you will be notified when selecting a point that doesn't have Z=0.00.

#### Point Creation Options

During drawing you have many point creation possibilities. Details

### Lines with Same Y or X at Both Ends GGY, GGX

Draw horizontal or vertical lines by fixing one coordinate value.

GGY: Draw lines with the same Y coordinate at both ends. You select or type the desired Y value, then select X coordinates to draw horizontal lines.

GGX: Draw lines with the same X coordinate at both ends. You select or type the desired X value, then select Y coordinates to draw vertical lines.

Creating horizontal lines with fixed Y coordinate

You can type the desired Y or type E for calculation options .

After selecting Y, you select points on screen and lines are drawn with X from each point and Y the selected value.

#### Practical Use:

This command is very useful when creating section or elevation drawings where multiple elements need to align horizontally or vertically.

### Best Fit Line BLST

Draw the optimal straight line that passes as close as possible through selected points.

Select multiple points and the command calculates the line that best fits all selected points using regression analysis.

Select points sequentially that will participate in the best fit line calculation. You can use Undo during the process.

After finishing, you're informed about the line properties: number of points, length, and maximum deviation.

Best fit line through multiple points

#### Typical Applications:

- Finding centerlines from irregular measurements

- Aligning points for construction lines

- Creating reference lines from survey points

### Rectangle with Sides and Direction ZDTT

Draw a rectangle at any orientation by specifying side lengths and direction.

Create rectangles by defining one side with two points (or one point and a distance), then specifying the perpendicular side length.

Creating oriented rectangles

Give 2 points (or 1 point and distance for the 2nd) for one side of the rectangle. After defining the first side, a temporary infinite line is drawn in perpendicular direction at the distance you gave for the first length.

You can select the 2nd point of the rectangle on this temporary line or give the length and it will be drawn automatically.

#### Workflow:

- Select first point of rectangle side

- Select second point or enter distance for first side

- Enter length of perpendicular side

- Rectangle is created at specified orientation

### Rectangle with 4 Points ZR4

Draw a rectangle by selecting one point on each side.

Select four points (one on each side of the rectangle) and the command creates a rectangle that encloses all points.

Creating rectangle from boundary points

This is useful when you have existing geometry that defines the boundaries of a rectangle and you want to create a clean rectangular shape around it.

#### Note:

The points don't need to be exactly on the corners - they can be anywhere on each side. The command calculates the rectangle that touches all four points.

### Perpendicular to Line Point PP

Draw a perpendicular line from any point on an existing line.

Procedure: a. Select the side where the new line will be drawn, b. Select the point on existing line where perpendicular will start, c. Specify the perpendicular line length.

- Select the side where the perpendicular line will be drawn

- Select any point on an existing line from which the perpendicular will be drawn

- Enter the length of the perpendicular line (by typing a number or dimensioning on screen)

If you press Enter at the length prompt, the length is defined from the projection of the first point you selected for the side to the existing line.

#### Common Uses:

- Creating perpendicular construction lines

- Drawing offsets from existing geometry

- Setting up measurement points perpendicular to features

### 3D Perpendicular to Line 3DPP

Draw a 3D perpendicular line from any point on an existing line with Z coordinate control.

Procedure: a. Select the side where the new line will be drawn, b. Select the point on existing line where perpendicular will start, c. Specify the perpendicular line length, d. Specify Z coordinate for the perpendicular line.

Same as PP command with the addition that you can specify Z coordinate for the new line. This is essential for 3D modeling work where lines need to extend in three dimensions.

#### 3D Modeling:

Use this command when working with 3D terrain models, structural elements, or any application where lines need to extend vertically from planar geometry.

### Extend to Point ZEX

Extend Lines, Polylines, Arcs, etc. to any point selected on screen.

Select any point on screen (not necessarily on an object) and extend selected Lines, Polylines, Arcs, etc. to that point.

Extending multiple lines to a common point

This is different from standard AutoCAD EXTEND command as it extends to an arbitrary point rather than to a boundary object.

#### When to Use:

- Extending multiple lines to meet at a common point

- Creating radial patterns from a center point

- Aligning object ends to a reference point

### Cut Line Segment ZCT

Cut a segment from Line, Polyline, Arc, etc. by selecting cut point and side to remove.

Select a cut point on a Line, Polyline, Arc, etc. and then select which side should be removed.

Cutting a segment from a line

This command provides a quick way to trim objects at specific points without needing to use the TRIM command with cutting edges.

#### Comparison with TRIM:

ZCT is faster for simple cuts where you know exactly where to cut and which side to remove, while TRIM is better for complex trimming with multiple boundaries.

### Total Line Length GT

Set selected objects to a specific total length.

Enter a desired length (by number or dimension on screen) and then select objects that will acquire this total length.

Setting multiple lines to the same total length

The length you enter each time is saved and suggested in each new use of the command.

This command is a specialized use of the AutoCAD LENGTHEN (Total) command with enhanced selection and memory features.

#### Applications:

- Standardizing multiple lines to the same length

- Preparing objects for array or pattern operations

- Creating uniform construction geometry

### Extend Line GD

Extend selected objects by a specific delta length.

Enter a delta length (by number or dimension on screen) and then select objects that will be extended by this distance.

Extending lines by a specific distance

The delta length you enter each time is saved and suggested in each new use of the command.

This command is a specialized use of the AutoCAD LENGTHEN (Delta) command with enhanced selection and memory features.

#### Memory Feature:

The command remembers the last delta value used, making it efficient when extending multiple objects by the same amount in a drawing session.

### Break at 1 Point Q1

Break an object into two parts at a selected point.

Select the object to be split into two, then select any point on screen whose projection on the object will be the break point.

This command is a specialized use of the AutoCAD BREAK command optimized for breaking at a single point rather than between two points.

#### Compared to Standard BREAK:

Standard BREAK requires selecting the object and then two break points. Q1 is faster when you just need to split an object at one location without removing any segment.

### Measure on Multiple Objects ZMES

Simultaneously execute MEASURE command with points on multiple objects.

Place points at regular intervals on multiple selected objects in one operation.

#### Features:

- Select objects using filters

- Select insertion distance for points by dimension on screen or number

- Select Layer (existing or new) for point insertion

- Get informed about number of objects processed

At the end you're informed about how many of the initially selected objects had the command executed on them.

This command is a specialized use of the AutoCAD MEASURE command with batch processing capabilities.

#### Efficiency:

ZMES can process hundreds of objects simultaneously, saving significant time compared to using MEASURE on each object individually.

### Join to Polyline PLL

Join selected objects into continuous Polylines using filters.

Select objects via filters that will be joined into unified Polylines.

Object selection with filter options

After selecting objects to join into Polylines, you're informed about the results:

#### Filter Tab:

The filter selection tab can be dismissed with Esc if you want to continue the command without filters.

If you have a set of Layers containing objects you frequently use in the command, selecting them from the "Layer" field of the tab allows quick re-selection in each new use by typing "Y" and Enter when the tab opens.

### Spline to Polyline S2P

Convert selected Splines to Polylines with control over point density between vertices.

Convert Splines to Polylines with ability to configure point density between vertices of the original Spline.

Converting Splines to Polylines

The command can be executed on many Splines simultaneously. Select Splines via filters .

At the end of the command, you can choose whether the original Splines remain in the Drawing or are deleted.

#### When to Convert:

- When you need to edit Spline vertices directly

- When exporting to formats that don't support Splines

- When you need consistent vertex spacing for measurements

### Reverse Line/Polyline Direction PLCO

Reverse the drawing direction of Lines and Polylines.

Typically used in cases where subsequent commands relate to the starting point and drawing direction of objects.

Reversing Line/Polyline direction (before and after)

At the end of the command, a temporary point is drawn at the starting point of the object so you can visualize the drawing direction.

#### Important for:

- Hatch pattern direction

- Dimension placement

- Path-based operations (sweeps, arrays along path)

- Consistent flow in pipeline or electrical diagrams

### Reverse Spline Direction SCO

Reverse the drawing direction of Splines.

Typically used in cases where subsequent commands relate to the starting point of objects.

The command can be executed on many Splines simultaneously. Select Splines via filters .

#### Applications:

- Preparing Splines for extrusion or sweep operations

- Aligning multiple Splines for surface creation

- Ensuring consistent flow direction in contour lines

### Polyline to Arcs P2A

Convert Polyline to Curve Fit - redraw with only arcs between vertices.

Selected Polylines are redrawn only with arcs between vertices. They can be returned to their original form with the P2L command.

Converting Polyline to arc segments

The command can be executed on many Polylines simultaneously. Select Polylines via filters .

At the end of the command, you're informed about how many Polylines were processed.

#### Use Cases:

- Creating smooth curves from survey data

- Preparing geometry for CNC machining with arc interpolation

- Improving appearance of contour lines

### Polyline to Spline P2S

Convert Polyline to Spline Fit - smooth with Splines between vertices.

Selected Polylines are smoothed with Splines between vertices. They can be returned to their original form with the P2L command.

Converting Polyline to smoothed Spline

The command can be executed on many Polylines simultaneously. Select Polylines via filters .

At the end of the command, you're informed about how many Polylines were processed.

#### Spline vs Arc Conversion:

P2S creates true Spline objects (NURBS curves) while P2A creates arc segments. Splines are mathematically smoother but may be less compatible with some manufacturing processes.

### Polyline to Lines P2L

Redraw Polyline with straight line segments.

Convert curved or smoothed Polylines back to straight line segments.

Converting curved Polyline back to straight segments

The command can be executed on many Polylines simultaneously. Select Polylines via filters .

At the end of the command, you're informed about how many Polylines were processed.

#### When to Use:

- Preparing geometry for systems that don't support curves

- Simplifying complex curves for analysis

- Reverting from P2A or P2S conversions

### Show Polyline Smoothing PSP

Display both original Polylines and smoothing results where P2S command was executed.

Show the original Polylines and the smoothing results on Polylines where the P2S command has been applied.

Displaying both original and smoothed Polylines

This allows visual comparison between the original geometry and the smoothed version.

#### Design Review:

Use PSP during design review to evaluate whether smoothing has preserved important geometric features or introduced unwanted changes.

### Hide Polyline Smoothing PHP

Hide original Polylines and show only smoothing results where P2S command was executed.

Hide the original Polylines and display only the smoothing results on Polylines where the P2S command has been applied.

Note: Polylines that are smoothed can be returned to original form with the P2L command.

#### Workflow:

- Use P2S to smooth Polylines

- Use PSP to compare original and smoothed versions

- Use PHP to hide originals when satisfied with smoothing

- Use P2L to revert if needed

### Add Polyline Vertices ADDPP

Add vertices to LwPolylines by selecting points anywhere on screen.

Select any point on screen which is added between the closest vertices of an LwPolyline while keeping it as a single entity.

Adding vertices to a Polyline

If you have drawn POLYLINE (old style), you must first run AutoCAD's CONVERTPOLY to convert to LWPOLYLINE. To draw LwPolylines by default, set PLINETYPE to 1.

#### LwPolyline vs Polyline:

LwPolylines (lightweight polylines) are more efficient and recommended for most 2D work. ADDPP works only with LwPolylines.

### Delete Polyline Vertices DELPP

Delete vertices from LwPolylines by selecting points near vertices.

Select any point on screen and the closest vertex of an LwPolyline near that point is removed.

Deleting vertices from a Polyline

This command simplifies Polylines by removing unnecessary vertices while maintaining the overall shape.

#### Simplification Strategy:

Use DELPP to reduce file size and improve performance when Polylines have more vertices than needed for their intended purpose.

### Extract Points from Line, 2D Pline, Arc, Spline ZXGPT

Export points from linear objects to text or Excel files.

#### What Gets Exported:

- Lines: Start and end points

- Pline: All vertices

- Arc: Start and end points, center point, and midpoint

- Spline: All Fit Points

Point extraction options and file selection

The command executes on many objects simultaneously. Select objects via filters .

As export file you can choose any text file or Excel. You have the ability to assign codes and numbering to exported points.

Exported points are unique - no duplicate points.

#### Note:

You can import these points into the Drawing as Blocks using the ITAX command.

### Kilometric Positions on Polyline ZZXTH

Insert Block at kilometric positions along a selected Polyline.

Insert Blocks marking kilometric positions along a selected Polyline. The Block size is set automatically according to the print scale.

Placing kilometric markers along a Polyline

Configuration options for kilometric positioning

#### Typical Applications:

- Road and railway kilometer markers

- Pipeline stationing

- Cable run measurements

- Survey traverse stations

### Distances from Start of Polyline ZZAPF

Insert distances from Polyline start at selected points along it.

Insert distances from the start of a Polyline at selected points along it. Distances can be written as text at selected positions or entered into a Block Attribute.

The text height is set automatically according to the print scale.

Measuring distances from Polyline start

Configuration options for distance annotation

#### Chainage Annotation:

This is essential for civil engineering and surveying work where stations along alignments need to be clearly marked with their distance from a starting point.

### Line Types Legend ZYPGR

Create a legend of line types from selected linear objects in the drawing.

Creates a list on screen (in legend form) showing various line types you have selected based on Linetype, Scale, Layer, Color, etc., with explanation for each distinct type: Line, Pline, Mline, Xline, Ray, Spline, Arc, Circle, Ellipse, 3D Face, and Region in the drawing.

Line types legend created with ZYPGR

Detailed documentation for ZYPGR command

#### Comprehensive Tool:

The ZYPGR command is part of a suite of line management tools including ZVFE (configuration), ZYPGR1/ZYPGR2 (editing), ZGRLIST (line type list), and ZGRLS (detailed line list).

---

#### Article 18: sdbox: Text

**Original:** https://www.sdtopocad.net/index.files/GIA_KEIMENA_EN.htm

## Text Management in CAD Drawings

SDBox Design Software - Command guide for text alignment, editing, import/export and text management

### Text Alignment ETT

Alignment of texts along the X or Y axis. Texts selected for alignment are moved (from their insertion point) only along X or Y, depending on the desired axis.

#### Steps

- Select a point for the Alignment Axis on screen.

- Choose alignment direction (Horizontal or Vertical).

- Select TEXT objects for Horizontal or Vertical alignment.

#### Details

The texts you select move along X or Y without changing their original justification (Left, Right, Center, etc.).

The command works with Ortho mode ON because it concerns alignment only along X or only along Y.

Example of text alignment

Result after alignment

#### Notes:

If you want texts to also acquire the same justification during alignment, select them before alignment, set the common justification, and then run the command.

#### Command Usage:

The command works on any type of text you select. Useful for aligning notes, labels, and annotations in drawings.

#### Tips:

For accurate alignment, use object snaps when selecting the alignment axis point.

### Text Continuation from below... STT

Insertion of a new text line below an existing one with the same characteristics.

#### Steps

- Select the Text you want to continue from below.

- Enter New Text lines as needed.

#### Details

From the text you select to continue from below, the following properties are retained for the new text line: same Layer, Color, TextStyle, Justify, TextHeight, Rotation, and Width Factor.

The new text is placed at the correct line spacing from the original selected text.

Example of text continuation

#### Command Usage:

Besides speed in adding new text lines below others, it helps avoid errors that are likely when copying texts and replacing their data.

### Text Line Spacing KTT

Setting the distance between existing text lines to standard distance or custom distances.

#### Steps

- Select the TEXT lines whose spacing you want to change.

- Choose spacing option : Standard, Custom, or Gradual adjustment.

#### Options

- Standard: Standard AutoCAD text line spacing (depends on Text Height).

- Custom: Set distance by entering a number or measuring on screen.

- Gradual: Gradually increase or decrease line spacing interactively.

Adjusting text line spacing

#### Notes:

The command remembers the last used distance so you can apply the same spacing to other text lines.

The command executes only on Text objects.

#### Command Usage:

In all cases where drawing text lines need spacing adjustment for clarity and order.

#### Tips:

The "Gradual" option is also useful for filling empty drawing areas with appropriate text spacing.

### Add Spaces KN

Gradual increase or decrease of a phrase length (Text format) by adding spaces between each character.

#### Steps

- Select TEXT for spacing expansion.

- Choose to continue adding spaces, remove added spaces, or finish.

Example of text with added spaces

#### Notes:

The first time the command runs on a phrase, 1 space is added between each letter of each word and more spaces between words.

If the command runs on a phrase where letters of each word are already separated by spaces, then more than 1 space is added each time you run the command.

#### Command Usage:

Usually used on individual words or phrases consisting of 2 or 3 words. In longer phrases, adding spaces makes reading difficult.

#### Tips:

To remove spaces from a phrase or replace e.g., 3 spaces with 1, use the TTT command.

### Delete Empty Texts TT0

Deletion of Text, Mtext, Arctext, Rtext objects without content.

#### Details

Empty Text, Mtext, Rtext and Arctext objects exist in the drawing but are not visible because their content has been removed. These objects occur when e.g., their content is cut for copying to another phrase.

These objects remain in the drawing and can be deleted with this command.

Empty text objects detection and deletion

#### Notes:

When the command ends writing "OK... nothing TT0." it means there were no Text, Mtext, Rtext, Arctext objects without content in the drawing.

#### Command Usage:

To lighten the drawing and avoid confusion when running other text commands that may involve objects without content.

#### Tips:

Run this command frequently in your own drawings and when receiving drawings from others.

### Text Editor TTT

Editing of Text, Mtext, ArcText collectively or individually.

#### Features

Case conversion (upper/lower), underline, add text left/right, Greeklish translation, find and replace characters or phrases, change text height, Color, Style, Layer, etc.

#### Operation

After selecting texts, the Text Editor window opens. You can edit each text individually, locate each text on the drawing screen, and search for phrases in the list of selected texts.

Text Editor main interface

Individual text editing mode

Collective editing options

#### Search and Replace

You can use wild-cards for complex searches. For example, to find texts starting with "Roo" type "Roo*" in the Search field.

#### Notes:

When in collective editing mode, you can still use the "<< >>" arrows for navigation in the List and "zoom" to locate the phrase on screen.

In the List of selected Texts, Mtext with more than 250 characters are not displayed.

#### Command Usage:

Mass text corrections, adding or removing phrases from multiple texts simultaneously, and mass editing control.

#### Tips:

The first few times you use the command, try simple examples to familiarize yourself with phrase editing in the complex search and replace section.

### Import Text from File F2T

Select a file and it is imported as text on screen.

#### Supported Formats

File types *.txt, *.csv, *.xls, *.doc, *.rtf, *.dat, etc. can be imported into the Drawing screen as Text or Mtext in grsdtopo1 font and size proportional to the print scale (for Note legends).

File selection for import

Text or Mtext import option

#### Command Usage:

Easy import of external text files into AutoCAD as Text or Mtext format and in print size proportional to scale.

#### Tips:

When importing files from MsWord or Excel, prefer files with simple settings and no macros or complex equations.

### Export Text to File T2F

Export of selected texts from the Drawing to a file of your choice.

#### Details

Select Text, Mtext, ArcText from the AutoCAD drawing screen and you have the option to export the texts as-is or with their coordinates appended at the end of each.

Texts are exported in order of the Y coordinate so that texts in reading order are exported that way in the file.

Path selection for export

Export with or without coordinates

#### Notes:

When exporting text content to MsWord (*.doc) or Excel (*.xls) files, the export files are in "Tab delimited text (txt)" format. You can save it in normal doc or xls format after opening.

The command name T2F is an abbreviation of "Text to File".

#### Command Usage:

Besides any other need to export text content to a file, you can export Texts to a MsWord (*.doc) file and perform spell checking. In this case, you can also export each text's coordinates to locate it on screen for correction.

#### Tips:

The SDBOX software has many capabilities for exporting files from the Drawing. For easy search of these files, choose clear names for the files you export.

### Convert Text to Mtext TTMT

Joining simple Text lines into one Mtext.

#### Steps

- Select the Text lines to become Mtext.

- The command creates one Mtext containing all selected text lines.

Multiple Text objects converted to single Mtext

#### Notes:

The created Mtext has the width of the longest line from the original Texts and height as many lines as you selected.

Texts in the Mtext are written in order of the Y coordinate of each.

The command name TTMT is an abbreviation of "Text To MtexT".

#### Command Usage:

In cases where you want to make changes to text lines while maintaining paragraph width (avoiding Cut & Paste).

#### Tips:

If the lines you select to convert to Mtext form a sentence together, after the Mtext is created, unify the sentences (with Backspace or Delete) so paragraphs work correctly within the Mtext width.

### Change Block Texts DDE

Editing contents of Texts, Mtext, Attributes of a Block, dimension values (Dimensions) and Rtext.

The command was originally created for Acad 2000 with the purpose of being the same command that edits contents of Texts, Block and Dimension.

Details

### Text Types Legend ZYPTT

Legend of Text, Mtext and Rtext types selected from the Drawing.

A list is created on screen (in legend form) showing the various text types existing in the Drawing based on TextStyle, Color, size, Layer, etc. and explanations you have given in a file using the ZYPTT1 or ZYPTT2 commands.

It usually serves cases where drawing texts are organized with different colors and Text Styles per category.

Text Types Legend - Click image for details

Details

### Text Type Characters ZZCHR

Drawing all characters of a selected TextStyle in correspondence with grsdtopo1.shx and writing the number of each character.

The command was created for the needs of designing new Text Styles.

You can use it to see which characters a font cannot read or to see the number of some characters and add them to phrases based on the following guide:

To write the character: Alt + 0 + number.

Character map display with character codes

---

#### Article 19: sdbox: Hatch & Legends

**Original:** https://www.sdtopocad.net/index.files/HATCH_EN.htm

## AutoCAD Hatch Management

SDBox Design Software - Guide for hatch insertion, legend creation, and documentation

### Selection - Insert HATCH ZHH

Add Hatch to the drawing by selecting patterns from organized tabs.

The Scale of the Hatch is automatically calculated based on the current Plot Scale .

Hatch Selection Interface

Details: Layer Selection

#### Info:

From this point on, the command functions exactly like the standard AutoCAD BHATCH command.

### Direct Hatch Commands

Commands for quick access to specific hatch types.

Several commands from the ZHH tab, which are used more frequently, can also be used outside the tab by typing the corresponding command in the command line. The exact same settings apply.

#### Solid Grays (Color 250-254)

- HH0: Gray-0 (Solid Hatch, Color 250)

- HH1: Gray-1 (Solid Hatch, Color 251)

- HH2: Gray-2 (Solid Hatch, Color 252)

- HH3: Gray-3 (Solid Hatch, Color 253)

- HH4: Gray-4 (Solid Hatch, Color 254)

#### Visual Reference

### Hatch Legend ZYPHH

Legend of Hatch types selected from the Drawing.

Creates a list on screen (in legend form) displaying the various Hatch types you selected, categorized by Type, Scale, Layer, Color etc., with a description for each line. Each line of the legend also includes the sum of areas per hatch category.

Text Height is defined automatically according to the plot scale. The scales of each Hatch are drawn matching those in the Drawing.

Example of generated Hatch Legend

#### Sorting Options

- Hname: By Hatch name. (T)

- Layer: By Layer. (L)

- Color: By Color. (C)

- LtScale: By Linetype Scale. (S)

- HAngle, HScale, HType: By Hatch properties. (HA, HS, HT)

#### Notes:

The color, scale, and other details written in small text on the right can be deleted after the command finishes if you want to prepare the Legend for plotting.

These details are presented to clarify the differences between Hatch categories.

#### Command Usage:

Besides inserting a Hatch Legend for printing, you can insert the Legend to verify small differences in other elements of the categories (like size or color bylayer etc.) and correct the objects they belong to.

#### Tips:

When 2 or more categories look the same but appear separately, check the decimals of numbers for Scale or Weight in the legend description.

The command name ZYPHH is an abbreviation of "z YPomnima Hatch" (Hatch Legend).

Commands that open editing files: ZYPHH1 , ZYPHH2

### List Configuration ZVFE

Opens a tab where you can view and edit the files involved in various commands.

You can also select which file category the command will read when executed.

### Editing - 1,2 ZYPHH1, 2

Select which of the 2 available files the ZYPHH command will read during execution to write the correct explanation text according to Hatch name.

By typing ZYPHH1 or ZYPHH2 you define which file the command reads (1 or 2), and you can edit it if you wish.

File selection prompt

- No: The command simply sets ZYPHH to read file "1" (or "2") and ends.

- Yes: Sets the file and opens the Description file for editing in Notepad.

### Drawing Hatch List ZHHLIST

Open a Notepad file containing a List of Hatch names present in the Drawing.

You can use this command to copy the Hatch names to the Description files where you can then fill in their descriptions.

### Detailed Hatch List ZHHLS

Open a file of your choice containing a detailed List (Hatch Name, Layer, Color, Scale etc.) of the objects you select from the Drawing.

Select export file and a set of objects from the Drawing which are analyzed, categorized, and the elements of each category (Hatch Name, Ltype, Layer, Color, Scale, Angle) are exported to the file.

Detailed object selection with filters

### Troubleshooting "Broken" Hatch

In case the Hatch looks "broken" or fragmented:

Example of broken hatch display

#### Solution:

- Double click on the Hatch or type Hatchedit to open the editing window.

- Select “Specified origin” .

- Press the button “Click to set new origin” .

- Pick a point on screen in the middle or at an edge of the Hatch that does not appear correctly.

- Select the “Preview” button to check the Hatch.

- Press OK to finish editing.

Hatch Edit Dialog settings

---

#### Article 20: sdbox: Images

**Original:** https://www.sdtopocad.net/index.files/IMAGES_EN.htm

## CAD Image Management Tools

SDBox Design Software - Command guide for image handling, georeferencing, and management in CAD drawings

### Copy Selected Images to Directory ZCCIM

Copies selected images from the drawing to a directory of your choice.

Images that you select in the Drawing are copied to the destination folder you specify. (Note: This command works over networks as well.)

#### Usage

This command is typically used when you need to deliver a drawing that contains images located in various folders, and you want them all moved to the same folder.

Once you copy them to your chosen folder, you can set your drawing to read them from there using the following command ZCIMD .

#### Tip:

When you are prompted via the Windows dialog to specify the new directory, do not select a specific image or other file—simply browse to the desired folder and click Save , and the path will be set.

Select the images you want from the drawing screen using filters:

Select images using filters

Folder selection interface

#### Note:

At the end of the command, you are informed how many images were copied. If some images are not found in the folder you specified, nothing changes for those.

### Change Path of Selected Images ZCIMD

Change the search path for images in case the drawing cannot read them, or if you want them to be read from elsewhere.

Select which images will participate and simply indicate the new directory via a Windows dialog.

#### Usage

Select the images you want from the drawing screen using filters:

Select images using filters

Change image path dialog

#### Note:

When prompted via the Windows dialog to specify the new directory, do not select a specific image or other file—simply browse to the desired folder and click Save , and the path will be set.

Images that are not found in the new directory remain unchanged. At the end of the command, you are informed how many were found and had their path changed.

### Isolate/Reveal Selected Images ZFIM

When a drawing has a large number of images, use this command to isolate or reveal specific images to lighten the drawing.

#### Usage

Select on the drawing screen which images should remain visible; those not selected receive the property "Don't Show Image" .

This command is typically used to lighten the drawing when it contains many images, or to toggle visibility of images through on-screen selections rather than through AutoCAD's dialog.

If you want to reveal all images again, type "All" when prompted to select which images the command should affect.

Image isolation interface

### Insert Image with Auto-naming ZIMIN

Inserts an image of your choice and automatically creates layers ''tiff_prsrm_****'' for images intended for background adjustment, and ''tiff_apsp_****'' for images that will be placed in the drawing as excerpts.

#### Steps

- Select the image you want to insert. (If you have a grayscale image, it is recommended to convert it to black and white before insertion , so that it is "lighter" in the drawing and can have transparency.)

- You are asked if the inserted image is black and white. (If it is black and white, the created layer will have color 251, which is dark and helps differentiate from other drawing objects. If it is colored, the layer will be white.)

- You are asked if you want to create a layer for later placement of the image as an excerpt in the drawing.

#### Layer Naming Convention

The command is designed based on the fact that most images inserted in topographic work are used in boundary or line studies . Therefore, the created layer has the prefix "tiff_prsrm_****" , where "prsrm" is an abbreviation for adjustment.

After it is adjusted behind the drawing, it may also be used as an excerpt, so you should move it to the layer "tiff_apsp_****" , where "apsp" stands for excerpt. (Color 252 is set for mid-gray tone, ideal for printing black and white excerpts.)

This insertion and organization method groups adjustment images and excerpt images together, while the prefix "tiff_" groups all images.

#### Tip:

The created layers have the image name as a suffix. Therefore, before insertion, it is recommended to name your images meaningfully, e.g.: RYMO_FEK153D-89, GYS_6456-8, DE_55-2002, Topo_1999, KATOPSH_Adeia_340-2001, DK_340-2001 , etc., so that when inserted into the drawing, the layers automatically receive corresponding names.

### Transfer Objects Between Images ZIMAA

Select a source and a target image, and the objects that will be moved or copied from the source to the target.

#### Usage

The copy or transfer is based on the difference in position, size, and rotation between the target and the source.

This command was designed for transferring parcel boundaries to drawing excerpts, since images used as excerpts are often also placed behind the drawing for verification or boundary determination.

#### Example Workflow

- Copy the image to the corresponding excerpt layer.

- Bring the excerpt image to its print dimensions with the command ZDFS .

- Isolate the adjustment image, the excerpt image, and the parcel boundaries with the command ZF .

- Run ZIMAA where you select the adjustment image (as source), the excerpt image (as target), and the boundaries to be transferred.

- Use ZONELAY to move all location lines (usually boundary or subdivision lines) to the "YPOMNHMA" layer, so that no objects remain outside the main drawing on layers such as property boundaries.

- Hatch the parcel in the excerpt with the command HHA .

### Insert Image with Georeference ZIMGEO

Insert an image with automatic placement, scale, and rotation based on the accompanying georeference file.

#### Usage

Select the image for insertion into the drawing, and a georeference file with the same name is automatically searched for. If found, the image is georeferenced upon insertion.

Supported georeference file extensions: t2w, tfw, tifw, tiw, j2w, jpgw, bmw, b2w, giw, g2w, wld

#### New Additions:

New features for inserting orthophotos from predefined addresses: Geotiffs and Map tiles .

### Select Image for Georeferencing ZIMGS

Select an image on the screen and automatically place, scale, and rotate it based on its accompanying georeference file.

#### Usage

Select the image on the drawing screen, and a georeference file with the same name is automatically searched for. If found, the image is georeferenced.

Supported georeference file extensions: t2w, tfw, tifw, tiw, j2w, jpgw, bmw, b2w, giw, g2w, wld

### Fit Contour with Real Sides ZIMDD

Select a continuous contour on the image, give the real value of each side, and the image "comes" to its real dimensions by calculating the average scaling, translation, and rotation.

#### Detailed Steps

- Give 2 points on the image for the first side.

- Enter or type the real dimension of that side.

- Give the next point for the 2nd (continuous) side.

- Enter or type the real dimension of that side.

- Continue for as many sides as you want.

- Select the objects that will be fitted to the above data (you can select more than one image or other objects).

- The image or whatever you selected "comes" to its real dimensions.

- Optionally, a Polyline can be drawn representing the exact shape, position, direction, and length of the sides as you specified.

#### Note:

The contour you give does not need to be closed. Usually, the largest continuous contour where dimensions are visible or known is selected.

### Label Image Names ZIMNM

Automatically writes the names of selected images in the upper left corner of each image.

#### Detailed Steps

- Give the text height by number or on-screen dimension.

- Select as many images as you want.

- The name of each image is automatically written in the upper left corner (on the layer of each image).

#### Tip:

It is recommended to choose a large text height so that in a drawing with many images you can distinguish the names from a distance.

---

#### Article 21: sdbox: Insert points

**Original:** https://www.sdtopocad.net/index.files/ITAX_EN.htm

## ITAX: Insert Points from File

SDBox Design Software - Command guide for importing coordinate points and symbols into CAD drawings

### Insert Points from File ITAX

#### File Format & Options

Import Symbols (Blocks) and/or other objects into the Drawing from a coordinate file.

You can select any file (txt, xls, csv, sdr, pp, gg …) that contains lines with coordinates, with or without a code at the beginning, and with or without Z and description at the end. The file is processed and analyzed, and you are informed of any errors or ambiguities.

Each symbol (Block) contains at least: Point, Code field, Elevation field, Description field. Symbols such as Stations, Trigonometric points, etc. also contain a circle and additional fields for information that may exist in the import file.

#### Basic Symbols:

- Tachymetric points

- Stations

- Trigonometric points

- Reper

- Axial intersection K

- Tachymetric Point

- O.T. Vertex

- Property vertex of Application Act

- Point Small

- Point Medium

- Point Large

- Point Xlarge

- Point from handheld GPS

- Station from GPS RTK

- Point from GPS RTK

- Dependency Point

- Old points of the above Categories

- Any of your own Blocks

Additionally, the following can be imported (without codes, Z, or other information):

- Simple Points (Nodes)

- Circles (with radius you provide)

- Automatic Polyline drawing

You can also make combinations of the above options.

File format and options selection

#### Notes:

Briefly, you define the following:

- Whether the file contains a code at the beginning or only coordinates.

- The delimiter of each line's fields (e.g., comma, tab, space, other).

Subsequently, depending on the initial letter of each file line, the corresponding symbols will be inserted. For example, if you want points starting with S or K to be inserted as Stations, then you write "S K" in the corresponding field.

#### Tips:

If you want all points to be inserted with the same symbol, write all the initial letters (K, S, T, O, D) or write * .

### Step-by-Step Analysis of the Command

Preview of final result

File selection for import

Parameters configuration tab

Preview of oringinal file

Set field seperator

Settings for nodes to import

After closing the tab, you select a Layer for each category to be inserted, and then the points are automatically drawn on the screen.

Details: Layer Selection

### Parameters Explanation

In the above tab, the import parameters are defined. Parameter analysis:

#### Display of initial code letters

The initial letters of the codes at the beginning of each line are filtered and listed in the corresponding box as many different ones are found.

You can copy them from there and paste them into whichever point or object categories you want to be inserted.

Example for lines:

```text
S10, 85.545, 9.524, -0.3859
S11, 45.335, 12,988, 10.258
T10235, 252.522, 124.555, 78.5856
80, 143.534, -24.8574, -0.4125
81, 150.747, -33.1424, -0.4192
82, 150.889, -32.985, -0.3358
```

After filtering, "S T 8" is written. So if you select the "STATIONS" symbol and in the field "Initial Codes for Import: S T" , then only lines starting with S or T will be inserted as Stations.

#### Points to be imported 3D

In this case, points are imported three-dimensionally with Z as written in each row of the file. NO need for 3D import for "Elevation in View" or "Triangle and Contour Calculation".

#### Import within Drawing area

Only points whose coordinates are within an area you select on the screen are imported (e.g., in case of a very large survey where interest is in a part of it).

#### Block Size

Size factor of the Blocks being inserted. If you want larger Blocks, choose a factor greater than one; if smaller, the opposite.

#### Decimals for displayed Z

Refers to the decimal places of the point elevation written in the corresponding Attribute "H" of the Blocks you insert.

#### Number for Z=nil

Refers to the number written in the file in the Z field (after x,y) when the point does not have an elevation measured and you do not want anything written in the corresponding Attribute "H" of the Blocks you insert. Usually this number is -999.00 .

If nothing is written in the corresponding field in the file, then nothing will be written in the Attribute "H" .

#### Import unique records

Points with the same codes and same coordinates are inserted only once in the drawing.

#### Clear all

All codes from the tab fields are cleared.

#### Default

The default codes are written in the tab fields.

#### Clear Mult-Layer Symbols

All codes from the tab fields concerning Mult-Layer Blocks are cleared.

#### Mult-Layer

Blocks with a Layer for each field (point, code, symbol, elevation).

#### Custom Symbols

Blocks where all their fields are on one Layer.

MULT-LAY: With this option, when points contain a description (Description), then descriptions are automatically grouped and Layers are automatically created upon import according to the description. These Layers have the prefix "descr_" so you can distinguish them. The format of the file you import must be of the form "Code or numbering, X, Y, Z, description" . Points without description go into the Layer "descry_No-Description" .

#### Old

Select from a Windows window Blocks of the above categories for points that are either abolished or have newer measurements.

#### Browse

Select from a Windows window any Block with or without Attributes. The Block you select and its Path are recorded and suggested in each new use of the command in any Drawing.

#### Drawing with each Point, Circle, Polyline

You can import each of these objects or a combination between them or a combination with the above Blocks.

- Point: Simple Points are inserted at the coordinates written in each line of the file.

- Circle: Circles are inserted with center at the coordinates of each file line and radius you provide for all before import.

- Polyline: A Polyline is drawn starting from the 1st point of the file and at the end you can choose whether it will close or not.

All of the above (as with Blocks) are drawn for those file lines starting with the codes you write in the corresponding box.

Example of custom symbols configuration

### Important Tip

As analyzed above, the ITAX command, besides other parameters it has, is divided into two areas for point import:

#### 1. Custom Blocks:

Contains all basic symbols and many others (GPS points, Dependency, View points, etc.) where all elements of the symbol are on one Layer .

Very few new Layers are created in the drawing and there are many management possibilities for the points. When points are inserted this way, you can change color (e.g., some tachymetric in red or those concerning elevations in magenta, etc.) or change Layer during drawing (e.g., TAX-SHM_OLD or STA-SHM_OFF, etc.) or import into different Layers (e.g., TAX-SHM_Epilisi-1 or STA-SHM_Nees or TAX-SHM_22-02-014, etc.).

You can also distinguish points from tachymetry resolution from those measured with GPS as suggested below.

#### 2. Mult-Layer Blocks:

Contains only the basic symbols of Topography (Stations, tachymetric, trigonometric, reper) and are symbols (block) where each part of them (point, code, elevation, description) is on different Layers.

The usual case for choosing this option is when you want to hide (Layer-> Off) e.g., the elevations of points or other elements. For this exact reason (for drawing convenience) the command SDD was created, which turns points on/off whenever you want.

For each point type, ~5 Layers are created in the drawing, and there is no possibility of changes or import into other Layers from the default.

Generally, it is not recommended to use Mult-Layer Symbols. This part was added upon request of some users for special use. The original form of the command, which is Custom Blocks , remains the most proper use of the command and this is recommended .

The difference between the two cases has to do only with the editing capabilities of the drawing points and the number of Layers added to the drawing.

#### Custom Blocks recommended usage:

STATIONS: It is recommended to import them into the drawing with this block in the Layer SURV-NODE-STTN which is suggested as default.

STA-SHM block example

TACHYMETRIC: With this block in the Layer SURV-NODE which is suggested as default.

TAX-SHM block example

Stations from GPS: With this block in the Layer SURV-NODE-STTN-GPS which is suggested as default.

STA-GPS block example

Points from RTK: (Tachymetric with GPS) with this block in the Layer TAX-GPS which is suggested as default.

SURV-NODE-GPS block example

Thus, within the drawing, for points, only the following Layers will exist:

- SURV-NODE-STTN-GPS (red)

- SURV0NOSE-STTN (orange)

- SURV-NODE-GPS (olive)

- SURV-NODE (white)

which you can manage regarding their color or their layer, or import new ones into other Layers (e.g., tachymetry phase 2 in Layer SURV-NODE_2 , etc.).

Generally, it is recommended that any layers concerning stations have naming beginning with STA-*** and any tachymetric SURV-NODE* for grouping.

---

#### Article 22: sdbox: FLOOR PLAN

**Original:** https://www.sdtopocad.net/index.files/KATOPSEIS_EN.htm

## AutoCAD Floor Plan Drawing Commands

SDBox Design Software - Command guide for drawing floor plan elements (tags, windows, doors, section indicators, etc.)

### Floor Plan Drawing Overview

Commands for drawing Floor Plan elements (tags, windows, doors, section indicators, etc.).

Floor plan sample

FLOOR PLAN DRAWING GUIDE

Video sample

#### See basic floor plan commands individually:

#### Important:

All tags (Texts, Blocks, symbols) are inserted into the Drawing in size proportional to the print scale.

Setting Default or minimum sizes

### Opening Tag Selection ZKKP

Opens a tab where you can select the type of Opening for the tag to be inserted into the drawing with its details.

You can configure decimals, coefficients, size, etc.

The tags refer to Doors, Windows or other openings and contain information about opening type, width, sill height and lintel height.

Opening tag selection interface

#### Selection Process

Select the type of Opening you want to add to the Drawing.

The type for opening tag you select is stored in the command's memory and suggested in each new use where you can accept it by simply pressing Enter .

Each command type for opening tag is analyzed below.

#### Details:

For layer selection: Layer Selection

### Columns ZZDK

Select basic dimensions and the name of column, pillar or beam and then these are recorded in 2 lines of Text on screen.

Column dimensioning example

#### Process Steps

- Select points on the column that define its basic dimensions (4 points in the above example)

- Give the prefix of the element being dimensioned (e.g., K for column, Υ for pillar, Τ for wall...)

- Each time you are informed about dimension annotations already in the drawing and based on these, the next column number is suggested or you can give your own

- Give on screen the placement point of the code and basic dimensions

- Continue with next Columns

#### Tips:

For each dimensioning you insert, its position is saved and you can search for it at any time with the ZVK command.

### Windows, Openings with Sill SPARS, SPAR, SANPS, SANP, SPART

Insert tag for Window opening or other Opening with Sill where you select on screen or with calculations and operations width, sill height and lintel height.

Window type symbols

#### Command Variations

- SPARS: Window (width, sill, lintel)

- SPAR: Window with numbering (width, sill, lintel). The letter Π is fixed and you give each symbol its number.

- SANPS: Opening (width, sill, lintel)

- SANP: Opening with numbering (width, sill, lintel). The letter Α is fixed and you give each symbol its number.

- SPART: Window with code numbering (width, sill, lintel). You give each symbol code and numbering. Use this type for Tag when windows are distinguished according to their type. You can also insert Window Type Legend YPPP .

#### Process Details

Give the 1st point at the edge of the opening ( not at the frame ).

Opening Tags should be placed on the side from which the floor measures the sill and lintel.

It is customary for tags to be placed so they are read from this side.

Each time the last sill you gave is suggested and you can accept it by pressing Enter or give a new number or do calculations .

The same applies above for the lintel.

#### Tips:

Place the symbol at the desired position. It is recommended to set as insertion point the middle of the width because the Block is designed to have the correct distance from the opening according to each scale.

For each symbol you insert, its position is saved and you can search for it at any time with the ZVBL command.

### Doors SPOS, SPO, SPORT

Insert tag for Door opening or other Opening where you select on screen or with calculations and operations width and lintel.

Door type symbols

#### Command Variations

- SPOS: Door (width, lintel)

- SPO: Door with numbering (width, lintel). The letter D is fixed and you give each symbol its number.

- SANS: Opening (width, lintel)

- SAN: Opening with numbering (width, lintel). The letter O is fixed and you give each symbol its number.

- SPORT: Door with code numbering (width, lintel). You give each symbol code and numbering. Use this type for Tag when Doors are distinguished according to their type. You can also insert Door Type Legend YPPP .

#### Process Details

Give the 1st point at the edge of the opening ( not at the frame ).

Opening Tags should be placed on the side from which the floor measures the lintel.

Each time the last lintel you gave is suggested and you can accept it by pressing Enter or give a new number or do calculations .

#### Tips:

Place the symbol at the desired position. Continue with the next Opening.

For each symbol you insert, its position is saved and you can search for it at any time with the ZVBL command.

### Zoom to Column ZVK

The position of Columns to which you have added name and dimensions with the ZZDK command has been saved and you can zoom with this command.

If you see the Drawing as below and type ZVK :

Column selection for zoom

Column selection list

#### Selection Process

Select with double click or OK the Column you want and the screen zooms automatically to it.

Zoom result to selected column

### Zoom to Tag ZVBL

The position of Openings to which you have added a tag with the corresponding commands has been saved and you can zoom with this command.

The command works the same way as the above ZVK with the difference that zoom is done to any tag you have inserted in the Drawing with any of the commands SPARS, SPAR, SANPS, SANP, SPART, SPOS, SPO, SPORT .

Opens the following tab where you select which opening tag you want to search for.

Tag selection for zoom

### Window/Door Legend YPPP

For openings for which you have drawn a tag with the commands SPART (for Window types) or SPORT (for Door types), you can add a legend to the drawing with predefined explanations for the type of openings.

The explanations of opening types are defined in a file  and you can use them in any Drawing.

For example, if you have various types of openings in the Drawing and type YPPP then after selecting whether a Window or Door Legend will be inserted and defining in which area of the Drawing the search for codes will be done, the following Legend will be drawn for each code group:

Window and door type legend

### Legend Explanations ZPARPO1

Opens a Notepad file which contains the explanations of opening types (for the commands SPART or SPORT) which appear in the YPPP Legend.

You can add or change the explanations.

Legend explanations editing

The code groups that exist in the Drawing can be collected with the following command ZPARPOLIST .

### Drawing Code List ZPARPOLIST

Opens a Notepad file which contains the opening types (for the commands SPART or SPORT) that the drawing contains.

You can copy the code groups to the file of the above command ZPARPO1 where you can also add the explanations.

Code list from drawing

### Window Symbol PARATH

Drawing standard Window indication in plan (single, double, with internal or external shutter, overlapping or simple with multiple divisions).

Window symbol selection interface

#### Window Types

#### Selection Process

Select one of the above window types and then select on screen:

- 2 points for window length

- 1 point on the drawing side

- The number of divisions in case of window with divisions

- The frame thickness (0.05 is suggested or what you gave in last use of command)

- The frame position relative to opening depth (If frame is flush with the side you gave the length, give 0.00)

The frame is drawn automatically and you continue with the next.

#### Tips:

As soon as the command tab opens, you can type numbers 1...8 for type selection and with Enter continue.

### Door Symbol PORTA

Drawing standard Door indication in plan (bare without frame, with 5x5 frame, with frame the entire wall thickness). You can also select drawing with dashed line (e.g., for elevation).

Door symbol selection interface

#### Door Types

#### Selection Process

Select one of the above door types and then select on screen:

- 2 points for door opening (1st point on hinge side)

- 1 point on the side where the door opens

- Point for wall thickness in case of frame with entire wall thickness

The frame is drawn automatically and you continue with the next.

In the selection "1. Bare door without frames" you first set desired leaf thickness.

#### Tips:

As soon as the command tab opens, you can type numbers 1...3 for type selection and with Enter continue.

### Elevation Insertion with Calculations ZST

Insertion into the drawing of Elevation or Height Block with type selection. You have ability for decimal specification, coefficients, symbol descriptions, etc. During drawing you can do calculations or operations.

Elevation and height symbols

Details for Elevation and Height symbol insertion commands

### Small Sections MTM

Select point, direction and name and the small Section symbol is automatically drawn which you place at its final position.

Small section symbols

### Stair Section Line TS

The line that "cuts" the stair at the Floor Plan level is drawn and instructions are given for the projection of the stair from below or the stair in elevation.

---

#### Article 23: sdbox: Plot scale

**Original:** https://www.sdtopocad.net/index.files/KLIMAKA_EN.htm

## AutoCAD Plot Scale Management

SDBox Design Software - Command guide for setting and managing drawing scale in CAD drawings

### Plot Scale Overview

Defines the plot scale which is permanently displayed during drawing, at the bottom right of the screen.

If the drawing is empty of objects, the Ltscale will be automatically set so that the same scale is suggested when reopening the drawing.

#### Scale Determination

Depending on the selected plot scale, the size of Blocks, Text, Dimensions, Hatch and the Ltscale of objects inserted or drawn with SDBOX commands are determined so that they print correctly.

This concerns the size of drawing symbols during their insertion so that they print with clarity.

Plot scale selection interface

#### Scale Flexibility

You can select and draw in any scale you wish to print. You can also change the scale during the drawing process.

#### Notes:

* Setting the plot scale does not affect objects already existing in the Drawing or other programs that work with scale.

* Especially for scale 1:50, texts, symbols, and line types are inserted so that they are at least clear even for printing at 1:100. This setting can be changed with the 50100SCALE command.

#### Command Usage:

You can use different plot scales in the same Drawing as many times as you want (e.g., for Details, partial prints, etc.).

Note: With the ASD command you can insert the following scale Block into any drawing and it will print normally according to the plot scale:

#### Tips:

If in an existing Drawing you decide to change the plot scale, then do the following:

- First run the ZCHL command to display lines correctly (and optionally ZCHW ) and ZCHHS for Hatches.

- Set the new scale with the "Change Plot Scale" command.

- Change the size of existing texts, Blocks, etc. with the ZCS command.

### Plot-scale helper commands

The English help also refers to `ZCHL`, `ZCHW`, `ZCHHS` and `ZCS`.

### Find Scale based on A4 Paper PHKLIM

The scale is automatically calculated and given as a number according to the "long side" of A4 paper as it is drawn on screen.

You can enter the calculated scale into the AutoCAD print window. If you want the scale to be registered, execute the above "Change Scale" command.

In the following example, where the desired outcome is to print a section of a Plan at a random scale on A3 paper, A3 paper has been inserted on screen ( XARTI ) and the vertical side (which is the long side of A4) is selected:

#### Selection Process

Select the 1st point on screen for the long side of A4 paper.

Select the 2nd point on screen for the long side of A4 paper.

After selecting the 2 points, the scale at which the Drawing should be printed so that A4 prints at its actual dimensions is calculated.

Selecting A4 paper long side for scale calculation

The calculated scale is displayed in the command line, showing the ratio between drawing units and real-world measurements.

Scale calculation result display

#### Tips:

This command is particularly useful when you need to determine the appropriate scale for printing a specific area of your drawing on standard paper sizes.

The command considers the actual drawn size of the paper representation in your drawing to calculate the appropriate plot scale.

### Related Commands

See some SDBOX commands related to plot scale:

#### Important:

When changing plot scales in existing drawings, always run ZCHL first to adjust line types, then change the plot scale, and finally use ZCS to adjust text and block sizes.

#### Workflow Recommendations:

- Determine final plot scale early in the drawing process

- Use PHKLIM to calculate scale for specific print areas

- Insert scale blocks with ASD for reference

- Use scale-dependent commands for consistent output

---

#### Article 24: sdbox: Layers

**Original:** https://www.sdtopocad.net/index.files/LAYERS_EN.htm

## AutoCAD Layer Management

SDBox Design Software - Command guide for layer isolation, import, export, copy, and editing in CAD drawings

### Freeze except selected ZF

Select via filters or on screen the Layers that will remain Thawed while all others become Frozen.

Using ZF and ZFF alternately, you can isolate a part of the Drawing and restore the rest of the drawing with ease.

#### Steps

- Run command ZF .

- Select Layers to remain thawed via filters or on screen.

- Selected Layers stay Thawed , all others become Frozen .

#### Notes:

The filter selection tab that opens can be dismissed with Esc and the command will continue.

If you have a set of Layers that you need to isolate frequently, select them from the "Layer" field of the tab. In subsequent uses, you can quickly reselect them by typing "Y" and Enter when the tab opens.

Filter selection interface

### Thaw all ZFF

Restores to Thawed state all Layers that are Frozen.

Using ZF and ZFF alternately, you can isolate a part of the Drawing and restore the rest of the drawing with ease.

#### Command Usage:

After using ZF to freeze unwanted layers, use ZFF to quickly restore the drawing to its original state.

### Grey except selected ZFG

Select via filters or on screen the Layers that will remain in their original colors while all others appear in dark grey color 251.

Using ZFG and ZFGG alternately, you can make various objects distinct in a part of the Drawing and restore the original colors with ease.

Example: Original vs Greyed objects

#### Tips:

Use this command to visually de-emphasize background layers while focusing on specific details.

### Restore original colors ZFGG

Restores all Layers to the colors they had before executing the ZFG command.

Restore original layers

### Highlight Layer LLOL

Objects belonging to the selected Layer blink as you move the mouse on screen.

Objects in the selected Layer are also counted by type and number.

#### Steps

- Run command LLOL .

- Select a Layer from the list or by picking an object.

- Move mouse on screen (without selecting anything).

- All objects on that Layer will blink.

#### Command Usage:

Quickly identify and count all objects on a specific layer, useful for auditing drawings or finding misplaced entities.

### Import Layer ZLAYINS

Import new Layers into the Drawing from predefined files of your choice (ZLAYINS1-5) which you can also modify.

Layer import dialog

#### Notes:

The tab that opens shows the Layers that will be imported (Name, Color, Ltype).

You can select which of the 5 available editing files the command will read by running the ZVFE command or one of the ZLAYINS1-5 commands.

### Selection - Configuration ZVFE

Opens a tab where you can view and edit the files that participate in various commands.

You can also select which file category each command will read when executed.

Command files configuration interface

#### Command Usage:

Centralized configuration for all SDBox commands that use external definition files. Essential for managing multiple layer sets, line type explanations, etc.

### Editing - 1, 2, 3, 4, 5 ZLAYINS1-5

Select which of the 5 available files the ZLAYINS command will read during execution.

By typing ZLAYINS1, 2, 3, 4, or 5 you define which file the command will read accordingly, and you can also edit it if desired.

File selection prompt

#### Notes:

If you select No , you have simply set the ZLAYINS command to read file "1" and the command ends.

If you select Yes , the same is set as above and the command continues by opening the Layer import file for editing.

Layer definition file format

### Layer Elements List ZLAYLISTP

Opens a Notepad file containing a List with the Layer elements of the Drawing in format: Layer '?' Color '?' Linetype.

You can, among others, copy these elements to the ZLAYINS command editing files and import them into other drawings whenever you want.

Layer elements export

### Open-Close Layer SDD

The command reads the Layers registered in one of the SDD1-SDD5 command files and if they are open it closes them or if they are closed it opens them.

This command makes it easy to manage drawings with many objects or cases where some Layers provide information when open and you can close them to have a clearer view of the Drawing.

#### Command Usage:

Create toggle groups for layers that you frequently need to show/hide together. For example, all annotation layers, all furniture layers, or all electrical layers.

#### Tips:

You can use wildcards in layer names. For example, "VEG*" will toggle all layers starting with VEG.

### Open-Close Layer in Xref XDD

The command reads the Layers registered in one of the SDD1-SDD5 command files and if they are open it closes them or if they are closed it opens them in the Xref of the Drawing you have selected.

Works like the above SDD command with the difference that it only examines the Layers of Xrefs.

### Change Xref XDDA

Change the Xref that commands like XDD use.

#### Notes:

You can run this command as many times as you want in the same Drawing and select different Xrefs.

### Editing - 1,2,3,4,5 SDD1-5

Select which of the 5 available files the SDD command will read during execution so that the corresponding Layers are opened or closed.

SDD file selection prompt

#### Notes:

If you select No , you have simply set the SDD command to read file "1" and the command ends.

If you select Yes , the same is set as above and the command continues by opening the file for editing.

SDD layer group definition

### Drawing Layer List ZLAYLIST

Opens a Notepad file with the names of the Layers that exist in the Drawing.

You can, among others, copy these elements to the SDD or ZLAYREN command editing files and define their properties.

Drawing layer list export

### Copy to Layer CTOLAY

Copy selected objects to an existing or new Layer.

Copy to layer interface

#### Notes:

After pressing OK you can choose if all objects will acquire Color or LineType "bylayer" or will keep what they have.

### Move to 1 Layer ZONELAY

Selected objects are moved to an existing or new Layer maintaining their Color and Linetype. The original objects are deleted.

#### Command Usage:

Consolidate objects from multiple layers to a single layer while preserving their visual properties (color and linetype).

### Rename Layers ZLAYREN

Rename Layer from a predefined List that you can change, or from free Selection.

#### Notes:

If you press F1 or "?" : Opens a list with the Layers of the Drawing where you can select objects of Layer 'DR' to be moved to another.

If you press Enter : You are asked to confirm the change of Layer 'DR' to 'Dromos'.

If you type a name: You are asked for confirmation and if the Layer exists then objects of Layer 'DR' are moved to it, or if it doesn't exist then a new one is created with Color and Linetype like 'DR'.

#### Command Usage:

The most common use of the command is during the electronic delivery of a Drawing where coded names of some Layers (as customary in an Office) change to clarify the contents of those Layers to recipients outside the Office.

### Editing - 1,2 ZLAYREN1-2

Select which of the 2 available files the ZLAYREN command will read during execution so that the corresponding Layers are renamed.

ZLAYREN file selection prompt

Layer rename definition file

### Convert to Layer: **_OFF 2R

Copy objects to selected Layer and move originals to Layer with name the original plus suffix of your choice.

2R command in action

#### Notes:

This command was created from the need for some objects that are on a Layer which is open during printing to not appear.

Thus the process was selected to move them to a Layer which is set closed and its name is the same as the original with suffix "_OFF" at the end.

### Current LMAN LLL

Displays at the bottom right of the screen the current selection of the LMAN command of Express Tools.

Current LMAN status display

#### Notes:

If no LMAN appears, then either none has been set or you are informed that there are Layers in the Drawing that have not been set in the current LMAN.

### Delete LayerFilter DELLFIL

Deletes all Layer Filters that exist in the Drawing.

#### Command Usage:

Clean up drawing files by removing unused layer filters that may accumulate over time.

### Layer Legend ZYPLAY

Layer Legend with explanations and categorization of Drawing objects.

#### Steps

- Run command ZYPLAY .

- Select insertion point for Layer Legend.

- The legend is created with Layer names, sample lines, and explanations.

Layer legend created in drawing

#### Notes:

Left: The name of the Layer is recorded.

In the middle: Depending on the objects of this Layer, a line is drawn for objects that have a different color from bylayer and different ltype from bylayer.

Right: The explanation from the corresponding files (ZYPLAY1 or ZYPLAY2) is recorded and the type of objects that exist in this Layer.

#### Command Usage:

This command is used either during the electronic delivery of a Drawing where you explain for each Layer what it contains and what its significance is, or to have an overview of the objects that exist in each Layer.

### Editing - 1,2 ZYPLAY1-2

Select which of the 2 available files the ZYPLAY command will read during execution so that the corresponding explanations are recorded in the Legend.

ZYPLAY file selection prompt

Layer legend definition file

#### Tips:

It is recommended to update the explanation files so that in each Line Legend the explanations are automatically included.

---

#### Article 25: Maps in SDBOX - SDBOX Manual

**Original:** https://www.sdtopocad.net/index.files/MAPS_SDBOX_EN.htm

## Maps in SDBOX

### What's Included in Maps

### Backgrounds and Maps

- International and general cartographic backgrounds

- Online map sources and geospatial reference data

### Importing Georeferenced Images

- Importing images with world file

- Importing GeoTIFF , such as georeferenced urban planning diagrams

- Automatic placement in correct position and organization in relevant layers

### Importing and Exporting Files

### Export and Location in External Maps

- Export the drawing or selected objects to Google Earth

- Automatically locate in Google Street View

- Open the location in maps such as Google Maps, Bing Maps, Mapillary, etc.

### zzLinks and Useful Online Sources

- Direct access to useful websites

- Access to official institutional data

- Quick navigation to relevant online resources

### How to Continue

### Final Note

This page has a clear role:

- To show the scope and logic of Maps in SDBOX

- And to guide you to the right videos and examples for in-depth learning

---

#### Article 26: sdbox: Modify

**Original:** https://www.sdtopocad.net/index.files/MODIFY_EN.htm

## Modify Objects

SDBox Design Software - Tools for modification, conversion, overview, replacement, rotation, and scaling.

### AMulti-Point Adjustment (Mean) ZMRS

MOVE - ROTATE - SCALE objects using start and end points, calculating average adjustment values.

The example below shows adjusting an image to the actual dimensions of a study using 3 points :

Adjusting an image to drawing coordinates

Select the first point concerning the initial state. This point (and all others) does not need to be on an object you will select for adjustment.

P = continue previous: If you type P , the point pairs (start - end) used in the last command execution are automatically set. Useful for applying the same adjustment parameters to different objects or at different times.

Select the next point of the initial state, then the target point for the destination.

- Yes: Continue selecting start and end point pairs.

- No: Average values for rotation, movement, and scale are calculated only from the pairs defined so far.

- Undo: Removes the last pair defined.

- Show Selected (F): Temporarily draws arrows from start to end points for verification.

After selecting point pairs, calculations are made for mean rotation, mean movement, and mean scale . You can choose which of the 3 actions to perform.

#### Tip:

If you have two drawing areas drawn at 1:1 scale and want to fit one to the other, it is recommended to perform only Move and Rotate so that the actual dimensions of the objects are not affected (no scaling).

Yes: Selected objects are copied, and Move, Rotate, and Scale are performed on the copies (originals remain). No: Move, Rotate, and Scale are performed directly on the selected objects.

Final adjustment result

### Different Plot Scales ZDFS

SCALE objects with options for different Plot Scales or conversion based on real vs. drawing dimensions.

First, objects are adjusted to their real dimensions, and then scaled up or down according to the different plot scales.

#### Example:

If you need to print two areas in the same Drawing with different plot scales. Select the general plot scale of the Drawing and the different scale for the second area. Based on the two scales, the Scale factor is calculated and applied to the selected objects of the second area.

Enter a number or pick a dimension on screen representing the length of an object (in the area where you want a different scale) for which you know the actual dimension.

This is useful when objects are not inserted at real dimensions. If objects are drawn at real dimensions , simply enter 1 here and in the next question.

Enter the specific plot scale for the selected objects (e.g., 20) and the general plot scale of the Drawing. The scale factor is calculated based on these.

Select the objects to apply the Scale.

Pick the base point for the scaling operation.

### Convert to Real Dimensions ZDFA

SCALE objects by selecting a dimension on screen and entering its real value.

Adjusts selected objects to their real dimensions.

#### Example:

If you have an image (e.g., an old floor plan) inserted at a random size and you know the real length of a specific dimension:

- Select or type the dimension on the screen.

- Type or select its real value .

- Select the objects to be scaled so that the selected dimension matches the real value.

### Select/Overview Objects ZZS

Select - Overview Objects based on Filters.

Select the type of objects you want to view, and they are presented one by one on the drawing screen with options to edit them.

#### Example Scenario:

If you want to zoom in on all Blocks named "PIN_WALL", on Layer "A_PINAKAKI WALLS FREEZE ERG", with Color "bylayer" and Scale "0.00":

Select the button "Q. Same as selection [Pick]>>" . Note: Pressing Q selects this button automatically.

Select one of the target Blocks. A message appears listing the properties of the similar objects to be selected.

You can type "All" to select all similar Blocks in the drawing.

Navigation toolbar during drawing review

A Toolbar opens allowing you to choose "Next" or "End" instead of typing Y/N. Pressing Enter usually accepts "Next". The screen zooms to the first Block and the edit tab opens.

You can navigate the screen with the mouse wheel (zoom in/out, pan). During navigation, you can execute various overview and modification commands from the toolbar.

Result: 18 objects in the selected area.

Tip: In any command requiring selection (Select objects), type !zzss or P (previous) to re-select these 18 objects.

### Continue Selection ZZSP

Continue the ZZS command if you interrupted it to execute another command.

You can interrupt ZZS at any time without viewing all objects. Use ZZSP to resume viewing the remaining objects.

### Last Selection ZZSS

Selects (Reselects) all objects that participated in the last use of the ZZS command.

Once selected, you can execute any AutoCAD command on these objects or change their Properties .

Note: If objects do not appear selected (highlighted), execute Regen .

### Select for Properties ZZSA

Select objects via filters to change Properties or execute any AutoCAD command.

Works similarly to ZZS , but once objects are selected, they remain "gripped" (Selected) and the command ends, allowing you to immediately execute commands like Move, Copy, or change properties in the Properties palette.

### Replace with Block ZRPL

Select objects via filters to replace them with a Block of your choice on a predefined Layer.

You can replace or add Blocks to almost any drawing object.

- The replacement Block is inserted at the insertion point (for Block, Text) or start point (for Line, Pline) or center of circles.

- If Text objects are replaced by Blocks with Attributes , you can choose to have the text content written into the 1st Attribute of the replacement Block.

- If replacing Block with Block , this transcription happens automatically.

- Replacement Blocks inherit the x,y,z scale of the original Blocks, or use 1,1,1 if replacing other objects.

Layer Details

Select the objects to be replaced or to which a Block will be added.

Select the replacement Block . Note: You can select any Block from any path. The chosen Block is registered and suggested in future uses.

Choose whether to Delete or Keep the original selected objects.

Note: If the replacement Block already exists in the Drawing, you choose whether to Rename the existing one. This is only necessary if you have updated the Block definition and want the new version.

### Replace on Original Layer ZRPLR

Select objects via filters to replace with a Block on the original Layer of the objects.

Works exactly like ZRPL , but instead of choosing a target Layer, the replacement Block is inserted on the Layer of the object it replaces .

### Align ZSTX

Align selected objects (via filters) to an imaginary line or a selected object.

- W: Select a point and direction for an imaginary alignment axis (drawn temporarily).

- S: Select an object (ARC, CIRCLE, LINE, LWPOLYLINE, POLYLINE, SPLINE, ELLIPSE, XLINE, RAY) along which the objects will be aligned.

Select the objects to be aligned. The command proceeds to align them and informs you how many were aligned.

### Rotate Selection ZRR

Selected objects rotate around their insertion point or acquire the same absolute angle.

- K (Relative): Rotate objects by a specific angle (typed or 2 points).

- N (Absolute): Objects rotate individually to acquire the specified angle.

- W (Screen): Define the final absolute angle using 2 points on screen.

- S (Match): Select a reference object; selected objects will rotate to match its angle.

Select the objects to rotate.

Pressing Enter or Yes rotates the objects by 90 degrees (1 quadrant) repeatedly.

### Change Properties ZCH

Select objects via filters to apply changes to Elevation, Color, Layer, Ltype, Ltscale, Ltweight, Thickness.

Works similarly to the AutoCAD Change command but uses advanced filtering and allows selecting properties (Layer, Line Type, Color) from visual tabs.

### Change LtScale ZCHL

Multiplies the existing Ltscale of selected objects by a factor you provide.

Useful when changing the general drawing Ltscale or Plot Scale and you want lines to maintain their relative differences.

If you choose Yes to change the drawing Ltscale, a factor is calculated and proposed. Then select objects via filters to multiply their Line Type Scale by this factor.

### Change LtWeight ZCHW

Multiplies the existing LineWeight of selected objects by a factor you provide.

Works exactly like ZCHL , but affects LineWeight instead of LtScale.

### Change Hatch Scale ZCHHS

Multiplies the existing Scale of selected Hatch objects by a factor you provide.

Useful when changing plot scales, ensuring Hatches scale correctly.

### Copy ZCC

Repeated Copy of objects selected via filters.

Functions with the same logic as the AutoCAD Copy command but adds filtering capabilities.

### Move ZMM

Move objects selected via filters.

### Move Y ZMY

Selected objects move only along the Y axis.

Select objects via filters, define a base point and a destination point. The objects move to the Y-coordinate of the destination while keeping their original X-coordinate.

### Move X ZMX

Selected objects move only along the X axis.

Select objects via filters, define a base point and a destination point. The objects move to the X-coordinate of the destination while keeping their original Y-coordinate.

### Erase ZEE

Remove objects from the drawing using filter selection.

Selection via filters makes it easy to delete specific objects amidst others you wish to keep.

### Scale from Insertion Point ZCS

Scale objects relative to their own insertion point.

Select objects via filters and enter a scale factor. Each object scales individually around its insertion point (Block, Text), start point (Line, Pline), or center (Circle).

### Rotate from Insertion Point ZCR

Rotate objects around their own insertion point.

Select objects via filters and enter an angle. Each object rotates individually around its insertion point (Block, Text), start point (Line, Pline), or center (Circle).

### Erase by Length LL0

Objects shorter than a specified length are removed from the drawing.

Select Lines, Plines, Splines, and Arcs to examine. Those with a length less than the number you provide are deleted. Useful for cleaning up zero-length objects.

### Flatten (Z=0) ZZ0

Objects with Z not equal to 0.00 are moved to Z= 0.00.

If you don't need 3D objects, it is recommended to run this command frequently. Distances measured in AutoCAD are often 3D (slope) distances; if an object isn't at Z=0, measured distances might be incorrect.

### Export to File ZXAG

Simple export of objects to a file, including insertion point or start point and content.

Procedure:

- Select objects to export via filters.

- Select the export file via Windows dialog (*.txt, *.doc, *.xls, etc.).

- The tab below opens:

- Objects are exported based on your choices.

- Optionally, the export file opens automatically.

---

#### Article 27: sdbox: Offset

**Original:** https://www.sdtopocad.net/index.files/OFFSET_EN.htm

## Offset Commands

SDBox Design Software - Advanced offset tools with layer management and automatic calculations

### Offset with Layer Change OL

Object offset with simultaneous layer change.

Continuous offsets with predefined distance or through points, where new objects are transferred to a layer of your choice from the list of existing drawing layers or to a new layer.

#### Process

- Select Layer for offset objects.

- Specify offset distance or select Through.

- Select object to offset .

- Specify point on side to offset .

Layer selection interface

#### Notes:

The layer you select is saved and suggested in each new use of the command.

From this point on, the command works similarly to AutoCAD's offset command.

#### Detailed Steps

Specify offset distance or [Through] <Through> :

You give the distance for the offsets you will make or Through meaning you will give a point each time for the offset.

When you select offset by distance, then osnap is deactivated at the moment you select side and returns when the command ends.

Select object to offset or <exit> :

Select the 1st object to be offset.

Specify point on side to offset :

Select point on the side where the offset will be made.

The new object will be transferred to the layer you selected above.

#### Command Usage:

Useful for creating parallel elements on different layers, such as wall outlines, road markings, or mechanical parts.

### Offset with Distance & Width OSK

Object offset based on length calculation and number of widths that fit in that length.

With this command, the offset distance is calculated by giving a length on screen and the number of widths that will fit in that length.

#### Process

- Select 1st point for total length.

- Select 2nd point for total length.

- Enter number of widths .

- Select object to offset .

- Specify point on side to offset .

Width calculation based on length and number of widths

#### Notes:

You give the number of widths that will fit in the above length.

With the length and number of widths, the column width is calculated and you are asked for confirmation.

If you don't agree, you will re-enter number of widths for new column width calculation.

From this point on, the command works like AutoCAD's offset with the distance calculated for column width.

#### Command Usage:

Perfect for creating evenly spaced elements like columns, studs, or structural members where you know the total space and number of elements.

### Offset with Multiple Widths OSKM

Continuous offset based on length calculation and number of widths.

The command works like the above OSK with the difference that all calculated widths are drawn automatically.

#### Process

- Select 1st point on object for offset.

- Select 2nd point for end of offsets .

- Enter number of widths .

- Select 1st object for offset .

#### Visual Example

Multiple offset calculation example

#### Notes:

You give the number of widths that will fit in the above length.

With the length and number of widths, the column width is calculated and you are asked for confirmation.

If you don't agree, you will re-enter number of widths for new column width calculation.

For example, in the above example if you give number of widths 5:

Select 1st object for offset:

Select the object which will be offset 5 times at width 0.20 and in the direction of 1st -> 2nd point you selected for length calculation.

You are asked to confirm if offset will be made for the last width:

In the above example, the last line is already drawn in the Drawing so you would answer no.

#### Application Examples

Stair creation and structural grid applications

#### Command Usage:

Ideal for creating stairs, structural grids, evenly spaced partitions, or any repetitive offset pattern.

### Offset BFF BFF

Repeated offset at specified distance with selection of points inside closed areas.

#### Process

- Select Layer for objects to be offset.

- Give offset distance .

- Select point inside closed areas .

#### Visual Examples

Various objects for offset operation

Offset results with distance 0.05

Layer selection for offset objects

#### Notes:

The layer you select is saved and suggested in each new use of the command.

You give the distance with number or with dimension on screen.

Select point internally in as many closed areas as you want to have offset.

#### Command Usage:

Excellent for creating insulation layers, clearance zones, or buffer areas around multiple closed shapes.

### Offset BFF2 BFF2

Repeated double offset at 2 specified distances with selection of points inside closed areas.

The command works like the above BFF with the difference that you give two distances for the 1st and 2nd offset.

#### Visual Examples

Original objects

First offset results

Second offset results (double offset)

#### Notes:

Similar to BFF but creates two concentric offsets at different distances from the original boundary.

#### Command Usage:

Perfect for creating double insulation, fire-rated assemblies, or compound wall sections with multiple layers.

---

#### Article 28: sdbox: Photos

**Original:** https://www.sdtopocad.net/index.files/PHOTOS_EN.htm

## Photo Sketch Creation

SDBox Design Software - Insert position and direction symbol for photos with numbering, titles, and scale

### Insert Photo Symbol PH

Insert symbol of photo position and shooting direction with photo number and continuous numbering.

#### Steps

- Select symbol size according to paper format.

- Choose Layer for 'Photos'.

- Enter next photo number (auto-counted or manual).

- Pick shooting point location.

- Pick shooting direction .

Photo symbol details

#### Symbol Size Selection

- 1.000 for A4 paper

- 2.000 for A3 paper

- Custom size

- Select from existing symbol on screen

- Check selected size with temporary drawing

#### Notes:

Existing symbols in the drawing are counted and the next photo number is suggested. You can enter any number or press Enter to accept the suggested one.

If you type "?" you can navigate in the drawing and execute various commands from an opening tab. You can edit already inserted symbols (rotate differently or add alphabetical characters to their name).

#### Command Usage:

Used for creating photo location sketches with automatic numbering and directional symbols.

#### Tips:

For drawings that constitute photo sketches, it is recommended to insert the paper block before inserting symbols using the XARTI command.

#### Detailed Process

You give the insertion point, the symbol is inserted (without number) and rotates around the point waiting for the shooting direction.

You give the point where the photo is looking towards, the symbol takes its final position and text with the photo number is automatically drawn with appropriate rotation for readability.

You continue with the next photos.

At the end of the command you are informed about how many symbols were inserted in the Drawing.

Navigation toolbar for photo editing

### Photo Counting PHLIST

Opens a file containing the names of photos inserted in the Drawing per Layer.

You can use this command to sort photos during printing.

You can save the file to a location of your choice.

List of photos from drawing

#### Notes:

The file is useful for creating photo indexes and documentation.

### Slanted Photo Title PHSTI1

Inserts the phrase "SKETCH OF PHOTO SHOOTING POSITIONS" in the Drawing in size proportional to A4 paper side.

#### Process

- Select first point of A4 paper long side [29.7cm].

- Select second point of A4 paper long side.

- Choose Layer for 'Titles'.

- Pick point on vertical side of paper for slanted title insertion.

- Select final placement point for slanted title.

Slanted title placement example

#### Notes:

After selecting the 2 points, the print scale is calculated so that A4 prints at its actual dimensions, and accordingly the letter height of the slanted title is calculated.

The slanted title refers to cases where you compile a photo volume divided into various chapters (e.g., Building Levels) and the slanted title protrudes from the Volume so the user can easily find what they want.

#### Command Usage:

Used for creating prominent chapter titles in photo sketch documents.

### Photo Title PHSTI2

Inserts 5 lines of Text (Project, Client, location, Date, Study type, Drawing type, scale) and Logo (small).

The phrases inserted remain in AutoCAD's memory for insertion in the same or another Drawing.

It is a quick way to insert a stamp with the drawing details and if you have many similar drawings you are informed by the command what you wrote last.

#### Process

- Select how to give print scale .

- Choose Layer for 'Titles'.

- Select point for caption insertion .

- Enter Project Title .

- Enter Client .

- Enter Project Location .

- Enter Date .

- Enter Notes (e.g., Photo Sketch).

- Enter Drawing Title (e.g., Drawing 01).

Photo title block example

#### Notes:

After entering the above fields, the Logo is automatically inserted as you have defined it in the directory: \\SDBOX\zzTitloi\Λογότυπα\Logotipo_Mikro.dwg

For each field, what you entered in the last use of the command in any drawing is suggested. You can accept the suggested value or enter a new one.

#### Command Usage:

Standardized title block creation for photo sketch drawings with persistent memory of last entries.

### Photo Scale PHKLIM

By selecting the long side of A4 paper as drawn on screen, the print scale is calculated.

Details: Scale calculation methods

#### Notes:

This command helps determine the appropriate print scale for photo sketches based on actual paper dimensions in the drawing.

### Short Title Editing ZSTI

Opens the drawing logotipo_mikro.dwg that participates in the PHSTI2 command and you can edit it.

Small logo editing interface

#### Notes:

Use this command to customize the small logo that appears in photo title blocks.

### Set Photos Folder FFCHDIR

Definition of the directory where photos are located that can be opened during drawing with the DFF command.

In studies where you need to consult photos during design, you can type the photo number in AutoCAD and it opens automatically with the following commands.

#### Process:

- Define the folder containing the photos (FFCHDIR).

- After setting the folder, you can open it whenever you want (ZDFFC) or

- Open the photo you want at any time (DFF).

Photos folder selection dialog

#### Notes:

In each new Drawing, the directory will be selected as you define below, but you can also change it each time you want.

To set or change the photo address, you simply need to open (with the above window) the folder to any address you want.

Once you open the folder, without selecting anything else with the mouse, and press Save, the address is recorded and set as the photo search address used by the ZDFFC and DFF commands.

At the File Name position "Do not change anything here!" is written to remind you that after opening the folder you don't need to select a file or anything else, just press Save.

#### Tips:

You can change the photo address as many times as you want, even within the same Drawing.

You can open the folder with the ZDFFC command at any time in the Drawing.

### Open Photos Folder ZDFFC

Opens the folder you have defined as containing the photos you will open with the DFF command.

When you type ZDFFC in the drawing, the photo folder you defined with the FFCHDIR command opens (via windows).

Photos folder window

#### Notes:

This folder will open in any drawing without needing to define it each time.

You can of course change it as many times as you want (even within the same drawing) with the FFCHDIR command.

#### Command Usage:

The command is designed for easy access to the photo folder, at any time, without the folder needing to be constantly open.

You can use this command for any folder you want to open frequently.

### Open Photo DFF

Opens photo, based on its number, from the folder you defined with the FFCHDIR command.

You can type the photo number or select it on screen if your drawing contains the positions and names of the photos.

#### Search Process

When you type or select the number e.g. 7, the program searches in the predefined folder for: "# 7", "# 07", "# 007", "# 0007" for the photo name.

Photo selection and opening

#### Notes:

You can type the photo number or select an object from the drawing screen (Text or Block) that contains the name.

Note: You don't need to give the full name "# 007", just 7 is enough.

#### Command Usage:

Quick photo reference during drawing by simply typing photo numbers or selecting photo symbols in the drawing.

---

#### Article 29: sdbox: Math operations

**Original:** https://www.sdtopocad.net/index.files/PRAXEIS_EN.htm

## Mathematical Operations with Objects, Dimensions and Numbers

SDBox Design Software - Mathematical operations in AutoCAD with SDBOX add-on

### Overview

The SDBOX add-on for AutoCAD provides comprehensive mathematical operations that can be performed on objects, dimensions, and numerical values directly within your CAD environment.

Mathematical operations interface in SDBOX

### Available Operations

##### = End

The command ends and the final result is given.

##### + - * /

Addition, subtraction, multiplication, or division.

### Usage and Workflow

- Select objects or enter values

- Choose operation

- Continue chaining operations

- Use = to finish

### Practical Applications

Engineering calculations directly inside CAD drawings.

### Compatibility

- AutoCAD

- BricsCAD

- GstarCAD

- ZwCAD

---

#### Article 30: SDBOX TIN / DTM Tools - Command Reference

**Original:** https://www.sdtopocad.net/index.files/Page14280_EN.htm

## TIN / DTM Tools

SDBOX command reference for terrain triangulation, breaklines, surface inspection and triangle editing inside AutoCAD, BricsCAD, progeCAD, GstarCAD and ZWCAD

### Overview

The SDBOX TIN / DTM toolset lets you create, inspect and edit triangulated terrain surfaces directly inside the CAD drawing.

A typical terrain-model workflow is:

- Define the points that will participate in the terrain model with ZDTS .

- Create the triangulation with ZDTMA , or limit it to a closed boundary with ZDTM . Where required, rebuild the model using breaklines with ZDTMB .

- Inspect and refine the triangulation using shading ( TTH / TTHR ), triangle-center checks ( TTG / TTGR ) and local editing tools ( TTR , TTD , ZTIN ).

- Export triangle geometry when needed with ZXTIN .

#### Compatibility

These commands are available on the supported SDBOX CAD platforms — AutoCAD, BricsCAD, progeCAD, GstarCAD and ZWCAD — according to the installed SDBOX edition.

### Add New Points TTS

Adds supplementary survey points for use in the terrain model while keeping the existing point numbering structure.

Use this command when additional terrain points are required after the original survey-point set has already been established.

#### Typical workflow

- Run TTS and define the first number for the new points.

- Pick the locations of the supplementary points and calculate or assign their elevations as required.

- Continue with ZDTS and the relevant triangulation tools to include the new points in the terrain model.

Elevation calculation options

Example: measured points and additional terrain points

### Select Points for DTM ZDTS

Defines the survey points that will participate in the TIN / DTM triangulation.

This command defines the active terrain-point set used by the SDBOX triangulation commands.

#### Selection

Select the required points in the drawing. For advanced selection by object type, block or attribute, see Object selection with filters .

#### Notes

- After the terrain-point set has been defined, create or edit the triangulation with ZDTM , ZDTMB , ZDTMA or ZTIN .

- When survey points are blocks, their elevation can be read from the attribute defined in the SDBOX point settings.

Selecting DTM points in the drawing

Selection options / filters

### Draw Standard Triangles ZDT1

Sets the current triangulation mode to create normal terrain triangles.

New triangles are then treated as normal terrain triangles rather than exclusion triangles.

#### Tip

Use ZDT2 instead when the triangles should define areas excluded from terrain processing.

### Draw Exclusion Triangles ZDT2

Sets the triangulation mode to create exclusion triangles.

Use exclusion triangles for areas that should not participate in subsequent terrain processing, such as buildings, voids or other non-terrain areas.

#### Typical workflow

- Switch to ZDT2 .

- Create or select the triangles that define the excluded area.

- Continue with the required terrain-model operations after the exclusion area has been defined.

Exclusion triangle definition

Result after applying exclusion triangles

### Open-Boundary Triangulation ZDTMA

Creates a triangulation without forcing a closed outer boundary.

Use this command when the terrain model should be generated directly from the selected point set without being clipped to a predefined closed boundary.

Open-boundary triangulation example

Example without a maximum triangle-side limit

Example with an appropriate maximum triangle-side limit

Resulting open-boundary triangulation

#### Notes

The command uses the terrain-point set previously defined with ZDTS . If no active point set exists, run ZDTS first.

### Create / Edit Individual Triangles ZTIN

Creates individual triangles manually for local terrain-model editing.

Use it for local corrections where the automatic triangulation does not represent the required terrain connection.

#### Workflow

- Select the three points that define the required triangle.

- Repeat as needed for additional local corrections.

- Use TTGR and TTH to inspect the edited triangulation.

### Rebuild Using Breaklines ZDTMB

Rebuilds the triangulation while respecting defined breaklines.

Breaklines represent terrain discontinuities or controlled linear features, such as curbs, ridges, channels or pavement edges, that the triangulation must follow.

#### Recommended steps

- Define the participating points with ZDTS .

- Draw or select the required breaklines according to the DTM layer setup.

- Run ZDTMB to rebuild the terrain triangulation using those breaklines.

Triangulation rebuilt using breaklines

Selection options / filters

Result after rebuild

### Triangulation Inside a Closed Boundary ZDTM

Creates the terrain triangulation inside a selected closed polyline.

Use this command when the terrain model must be limited to a defined project or survey boundary.

#### Workflow

- Draw or select the closed polyline that defines the terrain-model boundary.

- Ensure the participating points are defined with ZDTS .

- Run ZDTM and select the closed boundary.

Boundary selection for closed-area triangulation

Command options (example)

Triangulation result inside boundary

### Find Missing Triangles TTNO

Identifies missing triangle connections in the current triangulation.

Use this during terrain-model checking to locate gaps that may require a manual triangle or a triangulation rebuild.

Example of a detected missing triangle connection

### Show Triangle Centers TTG

Creates center markers for the currently drawn terrain triangles.

The center markers provide a quick visual check of the current triangle set and help identify missing or outdated terrain triangles.

### Refresh Triangle Centers TTGR

Updates the triangle-center markers after triangulation edits.

Run this after deleting, swapping, adding or rebuilding triangles so the center markers match the current triangulation.

#### Note

A missing center marker can indicate that the corresponding triangle is missing or that the center markers need to be refreshed.

### Shade Triangles TTH

Applies temporary shading to the terrain triangles for visual inspection.

Shading can make incorrect connections, spikes and local surface inconsistencies easier to identify.

Shaded triangles for visual inspection

#### Tip

Use TTHR to remove the shading and return to the normal triangle display.

### Remove Triangle Shading TTHR

Removes the temporary shading applied to the terrain triangles.

Use it after visual inspection to return to the normal triangulation display.

### Send Triangles to Back TTB

Sends the terrain triangles behind the other drawing objects.

Useful when the triangle edges interfere visually with survey or design geometry.

Triangles displayed behind other entities

### Bring Triangles to Front TTF

Brings the terrain triangles in front of the other drawing objects.

Use this when the triangle edges need to remain clearly visible during inspection or editing.

Triangles displayed in front of other entities

### Swap Triangle Diagonal TTR

Changes the common diagonal of two adjacent triangles for a local triangulation correction.

Use it when two adjacent triangles are connected in the wrong direction and a local correction is preferable to rebuilding the complete terrain model.

#### Note

Use the command Undo option if a triangle pair is changed unintentionally.

### Delete Triangle TTD

Deletes an individual terrain triangle.

Use it for local cleanup when an unwanted triangle should be removed before further editing or retriangulation.

### Toggle Triangle Layers TTV

Toggles the visibility of the DTM triangle layers.

If the triangle layers are visible they are turned off; if hidden, they are turned back on.

#### Tip

Useful for switching quickly between the terrain model and the rest of the drawing during inspection and editing.

### Toggle Point Layers SSV

Toggles the visibility of the point layers used by the DTM workflow.

Use it together with TTV to switch quickly between points-only, triangles-only and combined views.

### Delete Triangles Inside Polylines ZDTMD

Deletes terrain triangles located inside selected closed polylines.

Use this command to remove terrain triangles from closed areas that should not be part of the modeled surface, such as building footprints or other excluded zones.

#### Workflow

- Select one or more closed polylines that define the areas to exclude.

- SDBOX removes the terrain triangles inside those boundaries.

- Where useful, isolate the relevant DTM layers before running the command to simplify selection.

### Export Triangles to File ZXTIN

Exports selected terrain triangles to a coordinate-based text file.

The exported triangle geometry can be used for data exchange with other applications or workflows that accept triangle-vertex coordinates.

#### Exported data

Each triangle is written as three vertices (A, B and C) with their X, Y and Z coordinates:

Triangle export example

#### Tip

Use selection filters when only part of the terrain model should be exported. See Object selection with filters .

DTM Ribbon

---

#### Article 31: sdbox: Contours

**Original:** https://www.sdtopocad.net/index.files/Page14696_EN.htm

## Contours (DTM / TIN)

SDBOX command reference for calculating, reviewing and drawing contour lines from TIN / DTM terrain triangles inside CAD

### Workflow Overview DTM

Calculates and draws contour lines from a triangulated terrain surface made of 3DFACEs.

After creating the TIN / DTM terrain model from the survey points, you can generate temporary contours for checking and refinement, then create final contours for the production drawing.

Before generating contours, check the triangulation so that missing connections, duplicate triangles and invalid geometry do not affect the result.

#### Recommended checks before generating contours

- TTH: Shade the terrain triangles to make gaps and incorrect connections easier to identify.

- ZTTDBL: Detect and remove duplicate triangles.

- ZTTKK: Detect zero-area or vertical triangles for review and correction.

- ZTTSD: Detect cases where more than two triangles share the same edge.

#### Typical contour workflow

- Create temporary contours from the selected terrain triangles and review the result.

- After the triangulation is verified, create the final contours .

- Optionally smooth the final contours ; smoothing can be removed later if further editing is required.

- Add contour elevation labels automatically or at selected locations.

Contour-line workflow

### Temporary Contours (Calculate + Draw) IIJ

Calculates and draws temporary contour lines from the selected terrain triangles.

On the first run, select the terrain triangles and define the contour interval. On later runs, IIJ recalculates the temporary contours from the same triangle set, including any changes made to the triangulation.

#### Operation

After the required settings have been defined, SDBOX calculates and draws the temporary contours automatically.

#### Notes

Temporary contours are separated into major and minor contour sets, using different drawing properties for easier checking.

The contour interval can be set to the value required for the project, including small intervals where the terrain model supports them.

#### When to use it

Use IIJ after editing the triangulation when you want to review updated temporary contours before creating the final contour set with ZDTMISO.

#### Tips

After IIJ has created the temporary contour set, use IIJK for a faster redraw while inspecting the drawing.

During inspection, use TTV to toggle terrain triangles and SSV to toggle the DTM point layers.

### Fast Temporary Contour Redraw IIJK

Redraws the existing temporary contours without repeating the full contour calculation.

Use it while zooming and panning through the drawing when the temporary contour geometry has already been calculated and only the display needs to be refreshed.

#### Operation

SDBOX redraws the existing temporary contour set automatically.

#### Tips

After running IIJK, the command can be repeated quickly during visual checking, making it convenient for continuous contour inspection.

### Recalculate Temporary Contours (Reselect + Interval) IIJR

Lets you redefine the triangle selection and contour interval, then recalculates the temporary contours.

Use IIJR when either the active terrain-triangle set or the contour interval needs to change.

#### Notes

IIJR performs a full recalculation, so it is intended for changes to the contour setup rather than simple display refreshes.

### Final Contours ZDTMISO

Creates the final contour lines for use in the production drawing.

ZDTMISO uses the current terrain triangulation and contour settings to create the final contour geometry. If the triangulation is edited later, the final contours can be deleted and generated again.

#### When to use it

Run ZDTMISO after the temporary contour result has been checked and the terrain triangulation has been finalized.

### Smooth Contours IP2S

Smooths contour polylines to improve their cartographic appearance.

Smoothing is normally applied after the final contours have been created, when a more continuous visual appearance is required. If terrain or contour editing is still expected, leave smoothing until the final stage.

#### Tips

Apply smoothing only after the contour set is stable; otherwise further triangulation edits may require the contours to be regenerated.

### Remove Smoothing IP2L

Removes the smoothing applied by IP2S and restores the previous contour geometry.

Use it when smoothed contours need to return to their unsmoothed state for further editing or checking.

### Label Major Contours on Straight Segments SSA

Places elevation labels on major contour lines along suitable straight segments.

The labels are positioned on suitable straight portions of the major contours so they remain clear and readable in the final drawing.

Elevation labels on major contours

#### When to use it

Use SSA after the final contour geometry has been confirmed so labels do not need to be recreated after later edits.

### Add Individual Contour Labels SSAS

Places an individual contour elevation label at a selected location.

Use it when a contour needs a label at a specific location rather than through the automatic major-contour labeling workflow.

Individual contour elevation label

### Open / Close Contours IIV

Opens or closes selected contour polylines.

Use it when the contour geometry needs to be opened or closed for drawing presentation or a specific drafting requirement.

#### Notes

Before changing a contour from open to closed, verify that the underlying contour geometry supports the required result.

#### Article 32: sdbox: Coords display

**Original:** https://www.sdtopocad.net/index.files/Page3938_EN.htm

## Coordinates Display at Points (NNXY)

SDBox Design Software - Select points on screen and display coordinates in multiple formats

### Coordinates Display Overview NNXY

Select a point on screen and display its coordinates in many different ways.

The display format is defined in the ZNN command tab.

#### Process

- Select Layer for coordinates to be displayed.

- Select point for coordinates .

- Select side and position for annotation .

#### Configuration Interface

ZNN configuration interface for coordinates display

Detailed settings for coordinate display

#### Notes:

Size Factor (def.=1.0): Affects the size of displayed coordinates.

Decimal places: Affects the displayed decimals of coordinates.

Display: Affects how selected coordinates are displayed. Display is divided into 5 basic types: Horizontal and vertical, Top-bottom, In sequence with comma, In sequence with space, Dot-line.

### Configuration Details

#### Layer Selection

Select the layer for coordinate display.

#### Point Selection

You give a point on screen for coordinates.

U=Undo: Deletes the last annotation after command start.

Enter=Exit: Ends the command.

#### Annotation Position

You give the 2nd point on screen where the annotation position is determined. Depending on Ortho ON or OFF you have the following annotation possibilities:

- Above and right of the point

- Below and right

- Below and left

- Above and left

- On point line and right

- On point line and left

- Vertically above the point

- Vertically below the point

Enter=Undo: Cancels the selection of the 1st point and continues with new 1st point for coordinate annotation.

#### Notes:

In all cases, you give 2 points: the first for the coordinate point and the second for the annotation side.

For the types Top-bottom, In sequence with comma, In sequence with space you can differentiate the display method if you have Ortho ON or OFF during annotation side selection.

### Display Types (14 Different Formats)

#### 1. Horizontal and Vertical

X is displayed vertically while Y horizontally.

Horizontal and Vertical

Horizontal and Vertical XY

Horizontal and Vertical XY m.

#### 2. Top-Bottom

Coordinates are displayed in 2 rows (X in first row and Y in second).

Top-Bottom

Top-Bottom XY

Top-Bottom XY m.

#### 3. In Sequence with Comma

Coordinates are displayed in one row with comma between them.

In Sequence with Comma

In Sequence with Comma XY

In Sequence with Comma XY m.

#### 4. In Sequence with Space

Coordinates are displayed in one row with space between them.

#### 5. Dot-Line

A dot is drawn at the point and a line to the displayed coordinates.

Dot-Line

Dot-Line XY

Dot-Line XY m.

#### Format Variations:

- Basic: Simple coordinate display

- XY: Adds "X=" and "Y=" before coordinates

- XY m.: Adds "m" at the end of each number

#### Visual Explanation:

In the following figure, red dots show points for coordinate display (1st point) and blue arrows show annotation side (2nd point):

### Command Usage & Tips

#### Notes:

In all display cases, coordinates are displayed as text, so after insertion you can edit them in bulk with the TTT command for adding prefix or suffix, for searches and replacements, etc.

#### Command Usage:

Every case where you need to annotate coordinates in the drawing at specific points. Common such cases are basic columns for architectural study, drawing dependency points, wells-tanks, etc.

#### Tips:

In cases requiring mass coordinate annotation (property vertices, triangulation vertices, OT vertices, etc.) you can insert coordinate tables with the corresponding commands.

For point marking cases you can use the ZZB command.

---

#### Article 33: sdbox: Settings

**Original:** https://www.sdtopocad.net/index.files/RYTHMISEIS_EN.htm

## SDTOPO Settings Management

SDBox Design Software - Configuration, export/import, plot styles, and maintenance commands for CAD add-on settings

Settings Toolbar

### Default Settings for Topographic & Building Surveys DefZZTOPO

Sets the default suggested Layer, Color, Linetype, size coefficients, etc. that commands propose at their beginning, specifically adjusted for Building Surveys and Topographic drawings.

#### Description

This command configures the program defaults specifically for topographic and building survey work. It sets up:

- Layer naming conventions for different object types

- Color assignments for various elements

- Linetype definitions for different line categories

- Size coefficients for text, symbols, and annotations

- Plot style defaults for different scales

#### Notes:

These settings are defined in the corresponding fields in the command tabs. Running DefZZTOPO ensures all new drawings start with optimized settings for topographic and survey work.

#### Command Usage:

Run DefZZTOPO when starting a new topographic or building survey project to ensure all default settings are optimized for this type of work. Also use after installing SDTOPO on a new computer.

#### Tips:

After running DefZZTOPO, you can further customize individual settings in the command dialog boxes, then save your custom configuration with zzSavePropScadD for future use.

### General Settings for All Disciplines DefScaddOp

Restores the program's default settings concerning suggested Layer, Color, Linetype, size coefficients, etc. that commands propose at their beginning.

#### Description

Resets all program settings to their factory defaults. This includes:

- Suggested Layer names for new objects

- Default Color assignments

- Standard Linetype definitions

- Size coefficients for different scales

- Other parameters that commands suggest at their beginning

These settings are defined in the corresponding fields in the command tabs.

#### Notes:

Use DefScaddOp when you want to return to the original program settings, or if your configuration has become corrupted or inconsistent.

#### Command Usage:

Run DefScaddOp to reset all settings to factory defaults. This is useful before starting a new project type, or when troubleshooting configuration issues.

#### Tips:

Before running DefScaddOp, consider exporting your current settings with zzSavePropScadD if you want to preserve any customizations you've made.

### Export Settings for Use on Another Computer zzSavePropScadD

Exports the program settings (Layer, Color, Linetype, coefficients, etc. that commands propose at their beginning) to a file that can be loaded on another computer or different AutoCAD version.

Settings export dialog - choosing save location

Settings export confirmation

#### Steps

- Run the command zzSavePropScadD.

- Choose save location and filename for the settings file.

- Settings are exported to a *.lsp file containing all your program configurations.

- Use this file on another computer or AutoCAD version with zzInsPropScadD.

#### Description

Exports to the location and with the name you desire a *.lsp file that contains the program settings as you have defined them on your computer.

This file can be loaded on another computer or different AutoCAD version with the following command (zzInsPropScadD).

You can use this command simply to save the settings you have made during program use and have the ability to restore them later.

#### Notes:

The exported file contains all your custom Layer names, Color assignments, Linetype preferences, size coefficients, and other configuration parameters.

#### Command Usage:

Use zzSavePropScadD to: Backup your custom settings Transfer settings to another computer Share settings with colleagues Maintain consistent settings across multiple AutoCAD versions

- Backup your custom settings

- Transfer settings to another computer

- Share settings with colleagues

- Maintain consistent settings across multiple AutoCAD versions

#### Tips:

Export your settings after you've customized SDTOPO to your preferences. Keep the .lsp file in a safe location for future restoration or transfer.

### Load SDTOPO Settings from Another Computer zzInsPropScadD

Loads settings for Layer, Color, Linetype, coefficients, etc. that commands propose at their beginning, from a file created by another computer or different AutoCAD version or older saved settings.

Settings import dialog - selecting the settings file

#### Steps

- Run the command zzInsPropScadD.

- Select the file containing the settings exported with zzSavePropScadD.

- Settings are loaded and applied to your current SDTOPO installation.

- All commands will now use the imported settings.

#### Description

Select the file that contains the settings exported with the zzSavePropScadD command from any computer and any version of AutoCAD.

You can restore the original program settings or run this command as many times as you want.

#### Notes:

Importing settings will overwrite your current configuration. Consider exporting your current settings first if you want to preserve them.

#### Command Usage:

Use zzInsPropScadD to: Restore settings from a backup Apply settings from another computer Standardize settings across multiple workstations Test different configuration sets

- Restore settings from a backup

- Apply settings from another computer

- Standardize settings across multiple workstations

- Test different configuration sets

#### Tips:

Create different settings files for different project types (e.g., one for topographic surveys, one for building plans) and load them as needed with zzInsPropScadD.

### Plot Styles (Pen Settings) ZPLOTSTYLES

Predefined *.ctb files for printing at various scales with optimized line weights and colors based on default suggested object colors.

Plot styles folder structure

#### Description

When loading the Program, a folder (\\SDBOX\zzPlotStyles) is also installed with predefined *.ctb files for printing at various scales.

You can copy the *.ctb files to the Plot Styles folder of AutoCAD.

The settings they contain concern line weight and print color and have been defined based on the default suggested colors of objects.

Special care has been taken so that objects print clearly and differentiated for each print scale.

#### Note:

During program installation or update, you must copy the pen settings from the SDBOX folder to the AutoCAD PlotStyles folder with the ZPLOTSTYLES command.

#### Available Plot Style Files

The *.ctb files provided with the Program are the following:

- zzCADsdt_00050: Scale 1:50

- zzCADsdt_00100_apo50: For drawings composed for scale 1:50 that need to be printed at 1:100

- zzCADsdt_00100_Kat: Floor plans for Scale 1:100

- zzCADsdt_00100_Opseis: Elevations for Scale 1:100

- zzCADsdt_00100_Tomes: Sections for Scale 1:100

- zzCADsdt_00200: Scale 1:200

- zzCADsdt_00500: Scale 1:500

- zzCADsdt_00500-DE: Scale 1:500 with emphasis on text detail

- zzCADsdt_01000: Scale 1:1000

- zzCADsdt_02000: Scale 1:2000

- zzCADsdt_10000: Scale 1:10000

- zzCADsdt_A3-A1: For Scaled to Fit printing for paper sizes A3 to A1

- zzCADsdt_A4: For Scaled to Fit printing for paper size A4

- zzCADsdt_Photo_A2: For Scaled to Fit printing for photo drawings on paper size A2

- zzCADsdt_Photo_A3: For Scaled to Fit printing for photo drawings on paper size A3

- zzCADsdt_Sxedio-Xaraksis: Layout and implementation study drawings

- zzCADsdt_Tamplo: Printing drawings in reduced size (e.g., for wall mounting)

#### Plot Style Lineweights (Visual)

#### Detailed Color Table

View detailed all colors and line weights here .

Download detailed CTB configuration spreadsheet

#### Notes:

There are also other pen settings that print in color; the remaining colors generally print with thin black line. Colors 250 through 254 print in their own colors.

#### Command Usage:

Use the appropriate plot style for each drawing scale to ensure optimal print quality. The ZPLOTSTYLES command helps install these styles to your AutoCAD Plot Styles folder.

#### Tips:

Watch the tutorial video: Print to PDF!

### Uninstall SDTOPO unsdtopo

Uninstalls the SDBOX program. Removes Menus, fonts, Hatches, Linetypes, etc.

#### Description

This command performs a complete uninstallation of the SDTOPO add-on from your AutoCAD environment.

It removes:

- SDTOPO Menus from AutoCAD interface

- Custom fonts installed by SDTOPO

- Hatch patterns specific to SDTOPO

- Linetype definitions added by the program

- Toolbars and ribbons created by SDTOPO

- Support files in the SDBOX directory

#### Note:

This command is used before installing a new version of the program. It ensures a clean installation by removing all previous SDTOPO components.

#### Warning:

Running unsdtopo will remove all SDTOPO components. Make sure to: Export your settings with zzSavePropScadD if you want to preserve them Backup any custom files in the SDBOX directory Close all AutoCAD sessions before uninstalling

- Export your settings with zzSavePropScadD if you want to preserve them

- Backup any custom files in the SDBOX directory

- Close all AutoCAD sessions before uninstalling

#### Command Usage:

Use unsdtopo when: Preparing to install a new SDTOPO version Troubleshooting installation problems Completely removing SDTOPO from your system Before transferring your license to another computer

- Preparing to install a new SDTOPO version

- Troubleshooting installation problems

- Completely removing SDTOPO from your system

- Before transferring your license to another computer

#### Tips:

After uninstalling with unsdtopo, you can perform a fresh installation. Use zzInsPropScadD to restore your saved settings after the new installation.

---

#### Article 34: sdbox: Textstyles

**Original:** https://www.sdtopocad.net/index.files/SDFONTS_EN.htm

## Textstyles

SDBox Design Software - Linear textstyles including all symbols printed at desired thickness

### Overview

During the development of the SDBOX add-on for AutoCAD, we have designed, among other things, two basic fonts:

#### Core Fonts

gr-SDBOX1.shx gr-SDBOX2.shx

#### Note

Texts and Blocks also use Arial and Times New Roman.

### Inserting Special Symbols

Font symbols display

#### Most Commonly Used Symbols

Symbol | Alt Code | Typical Use

² | Alt + 0178 | Squared (m², area)

³ | Alt + 0179 | Cubed (m³, volume)

Ø | Alt + 0216 | Diameter

± | Alt + 0177 | Tolerance

° | Alt + 0176 | Angle / Bearing

π | Alt + 227 | Pi (circle calculations)

‰ | Alt + 0137 | Per mille (‰, slope / gradient)

© | Alt + 0169 | Copyright

® | Alt + 0174 | Registered mark

™ | Alt + 0153 | Trademark

→ | Alt + 26 | Direction / Section Arrow

← | Alt + 27 | Direction

▲ | Alt + 30 | Elevation / Level Marker

▼ | Alt + 31 | Lower Elevation

≠ | Alt + 8800 | Not Equal

### Changing Font Appearance

#### zzarial Command

Sets SDBOX fonts to appear as Arial.

### Technical Specifications

- Linear SHX fonts

- Greek + international symbols

- AutoCAD 2010+

---

#### Article 35: SDBOX Workflows & Guides - SDBOX Manual

**Original:** https://www.sdtopocad.net/index.files/START_INSIDE_CAD_EN.htm

## SDBOX Workflows & Guides

### Choose Your Workflow

SDBOX covers several connected CAD production workflows. This page brings the main SDBOX workflows together, so you can go directly to the guide, video or example that matches your current task.

### Installation & Setup

### 1. Survey Plans

### 2. Maps

### 3. DTM

### 4. Floor Plans

### 5. Sections & Elevations

#### Frequently Asked Questions

Choose the entry point that matches your current deliverable:

- If you are a new user , start with "Installation & Setup" .

- If you need a complete topographic survey plan , go to "Survey Plans" .

- If your project includes terrain modeling, contours, profiles, sections or volumes , go to "DTM" .

- If you are preparing as-built building drawings , use "Floor Plans" and "Sections & Elevations" .

---

#### Article 36: Getting started with SDBOX - SDBOX Manual

**Original:** https://www.sdtopocad.net/index.files/START_SDBOX_EN.htm

## Getting started with SDBOX

### 1 Installation and activation

### 2 Start with a simple drawing

- Your existing CAD files and drawing structure

- Your normal layer and editing workflow

- Your usual checking, plotting and delivery process

- Open or create a CAD drawing

- Choose the SDBOX tool that matches the task

- Review, edit and complete the result directly in CAD

### 3 Use commands when you need them

- Start with survey point handling and plan drafting

- Add map backgrounds or geospatial files when location data is needed

- Use terrain modeling, sections or volumes when the project requires them

- Finish with tables, legends, title blocks and PDF output

### 4 Help when you need it

### 5 Learn gradually

### How to continue

- Use the Search in the Manual Portal

- Choose from Quick links

- Continue with Survey Plan Drafting for a complete production workflow

---

#### Article 37: sdbox: Study Composition

**Original:** https://www.sdtopocad.net/index.files/Sintaxi_Topografikon_EN.htm

## Study Composition

SDBox Design Software - Guide for Composing Topographic and Architectural Surveys

This manual provides comprehensive instructions for composing Topographic diagrams and Architectural Surveys (Plan, Section, Elevation) using SDBOX software. It includes step-by-step guides, examples, and settings for optimal results.

#### SURVEYS:

All tools are provided for the complete composition of Topographic and Building survey drawings. The process is presented in detail in the guides below.

Starting from version 3.00, new tools for constructing triangles (DTM) and contours have been added.

Note: The plot styles (*.ctb files) that accompany the application are configured so that the final printed drawings meet high standards of clarity and detail.

### Instructions for Topographic Composition

Complete guide for creating Topographic diagrams with SDBOX.

Detailed Topographic Composition Instructions

Step-by-step guide for diagram composition with SDBOX

#### Example Images:

Topographic Diagram Examples - Click on images for details

### Instructions for Architectural Plan Composition

Guide for composing architectural plans with all necessary elements and symbols.

Detailed Plan Composition Instructions

Step-by-step guide for plan composition with SDBOX

Plan Layers

Explanation of Layers and example of a plan drawing

#### Plan Samples:

Architectural Plan Examples - Click on images for details

### Instructions for Architectural Section Composition

Guide for composing architectural sections with detailed analytical elements.

Detailed Section Composition Instructions

Step-by-step guide for section composition with SDBOX

Section Layers

Explanation of Layers and example of a section drawing

#### Section Samples:

Architectural Section Examples - Click on images for details

### Instructions for Architectural Elevation Composition

Guide for composing architectural elevations with attention to detail and materials.

Detailed Elevation Composition Instructions

Step-by-step guide for elevation composition with SDBOX

Elevation Layers

Explanation of Layers and example of an elevation drawing

#### Elevation Samples:

Architectural Elevation Examples - Click on images for details

### Setting Default or Minimum Sizes 50100SCALE

Setting indication and station sizes for scales 1:100, 1:50, and smaller.

#### Default:

The indication and station sizes are inserted into the drawing "larger" to allow for printing at larger scales as well.

#### Minimum:

The indication and station sizes are inserted into the drawing with the minimum size so that they remain clear when printed at the design scale set in the drawing.

#### Explanation:

The sizes of indications and stations for scales 1:100, 1:50, and smaller are inserted into the drawing with almost double the size (compared to those of other scales).

This happens in the program's default settings to allow a drawing composed, for example, for scale 1:50 to be printed also at 1:100 while keeping texts and symbols as legible as possible.

It is common for plans at 1:50 or 1:100 to be printed on small paper (for construction sites or presentations), and for this reason, in the program, objects are inserted "larger" so they can be read at larger scales as well.

With the 50100Scale command, you have the ability to change this setting and define the sizes of symbols and texts to be the minimum, ensuring clarity and space efficiency in the drawing.

At any time, you can restore the program's default settings as described above.

#### Note:

The other scales (1:200, 1:500, etc.) are not affected by this command.

#### Default vs. Minimum Comparison:

In the image below, the differences between the two options (default and minimum) are shown in blue. Objects in black remain the same in both options.

Differences between Default (default) and Minimum (minimum) sizes

---

#### Article 38: sdbox: SECTIONS-ELEV

**Original:** https://www.sdtopocad.net/index.files/TOMES_OPSEIS_EN.htm

## Building Sections and Elevations Tools

SDBox Design Software - Command guide for automatic creation of building sections and elevations from plan view in CAD drawings

#### Quick Links:

Guide for Section Design \| Guide for Building Elevation Design

Section Example \| Elevation Example

### Line with same Y at both ends GGY

Draws horizontal lines at a specified Y coordinate.

You can type or select the desired Y coordinate, then select points on screen to draw lines with X coordinate of each selected point and Y the specified value.

#### Steps

- Enter or select the desired Y coordinate.

- Select points on screen where you want horizontal lines.

- Lines are drawn automatically at the specified Y coordinate.

You can type the desired Y coordinate or type E for calculation options. After selecting the Y, you select points on screen and lines are drawn with X coordinate of each point and Y the specified value.

Example of horizontal lines drawn with GGY command

#### Notes:

The command is very useful when raising a Section or Elevation from plan view. GGX works similarly but for X coordinate (vertical lines).

#### Command Usage:

Use this command when you need to draw multiple horizontal lines at the same elevation, such as floor levels, foundation lines, or roof lines in sections and elevations.

#### Tips:

Use the E option for calculations or operations to determine the Y coordinate from existing geometry or mathematical operations.

### Line with same X at both ends GGX

Draws vertical lines at a specified X coordinate.

The equivalent command for X coordinate. You specify the X value, then select points to draw vertical lines at that X position.

Works exactly like GGY but for vertical lines. Very useful for aligning elements in sections or creating grid lines.

#### Tips:

GGY and GGX are complementary commands for creating the basic grid structure of sections and elevations from plan view coordinates.

### Line at Y=0.00 GRY0

Draws a horizontal line at Y=0.00 (zero elevation).

Specialized version of GGY that automatically sets Y=0.00 for drawing ground level or reference lines.

GRY0 command draws line at zero elevation

#### Command Usage:

Use GRY0 when you need to quickly draw the ground level line or any reference line at zero elevation in your section or elevation drawing.

### Raise line to Y GG1

Draws vertical lines from selected points to a specified Y coordinate.

Select the desired Y coordinate, then select points on screen to draw vertical lines from those points up to the specified Y value.

#### Steps

- Enter or select the target Y coordinate.

- Select points on screen from which to draw vertical lines.

- Vertical lines are drawn from each point to the specified Y.

Vertical lines drawn with GG1 command

You can type the desired Y or type E for options. After selecting Y, you select points on screen and vertical lines are drawn from those points to the specified Y.

#### Command Usage:

Perfect for creating vertical elements in sections like columns, walls, or for projecting plan elements to their correct height in elevations.

### Floor Slabs GRPO

Automatically draws floor slabs at specified elevations.

Creates floor slab lines at a given Y coordinate. You specify the layer for slabs, then the elevation, and draw slabs by selecting points.

#### Steps

- Specify the layer for 'Floor Slabs'.

- Enter or select the Y coordinate for slab elevation.

- Select start and end points for each slab.

- Slabs are drawn at the specified elevation.

Floor slabs created with GRPO command

#### Note:

After drawing the first slab, for subsequent slabs, after selecting Y, define as start and end points the points of the first slab so all slabs are the same length and aligned.

#### Command Usage:

Use GRPO to quickly create all floor slabs in a building section at their correct elevations. Essential for multi-story building sections.

#### Tips:

For consistent results, always use the same start and end points for all slabs on the same level. This ensures perfect alignment and equal lengths.

### Levels/Elevations TST

Inserts level symbols with elevation text at selected points.

Inserts a level symbol at the point you select, with text showing the Y coordinate of that point. You can configure decimals, units, offset values, multipliers, etc.

#### Steps

- Specify the layer for 'Levels'.

- Configure options if needed (press O for Options).

- Select points where you want level symbols.

- Level symbols with elevation text are inserted automatically.

Levels configuration options dialog

You can press O for Options to configure decimal places, units, prefix/suffix, offset values, multiplier, etc.

R=Reverse direction: Changes the symbol orientation by a quarter turn around the insertion point.

U=Undo: Removes the last inserted symbol.

Level symbol examples

#### Command Usage:

Use TST to mark all important elevations in sections and elevations: floor levels, ceiling heights, window sills, roof levels, etc.

#### Tips:

Configure the options once according to your project standards, then the command will use these settings for all subsequent level insertions.

### Levels with line (outside) TSTGR

Inserts level symbols with dashed leader lines to the outside of the drawing area.

For each point you select, a level symbol is inserted at a predetermined distance right or left of the drawing area with a dashed line connecting to the point.

#### Steps

- Specify the layer for 'Levels with line (outside)'.

- Define the main side of the drawing (leftmost or rightmost).

- Define the annotation side for levels.

- Select points for level insertion.

- Level symbols with leader lines are created automatically.

Levels with leader lines outside drawing area

The command works based on settings you have defined in the TST options tab. You can choose whether leader lines stop at a default distance or at a point you specify.

#### Command Usage:

Use TSTGR when you want clean, organized level annotations outside the main drawing area, connected to points with dashed leader lines. Common in professional architectural sections.

### Check Levels CCTST

Checks levels in a selected area for incorrect elevation text.

Select an area of the drawing and levels with incorrect elevation text are highlighted with a red circle. Useful if a level has been moved without updating its text value.

#### Steps

- Select area containing levels to check.

- The command analyzes all levels in the area.

- Levels with incorrect text (not matching actual Y coordinate) are highlighted with red circles.

- Report shows how many levels were checked and how many errors found.

Level checking with error highlighting

#### Note:

It is recommended to run this command frequently in your drawing and definitely before final delivery to ensure all level annotations are correct.

#### Command Usage:

Use CCTST as a quality control tool before ploting or delivering drawings. Ensures all elevation annotations match the actual geometry.

### Text from Xref TTXX

Copies text from an Xref and places it in the current drawing at a specified elevation.

Select text from an Xref (external reference) and it is rewritten in the current drawing at the same X coordinate but at the elevation you specify.

#### Steps

- Specify the layer for 'Text from Xref'.

- Select text in the Xref to transfer.

- Specify the elevation where text should be placed.

- Text is copied with same X coordinate but at new Y elevation.

Copying text from Xref to current drawing

From the Xref you can select text or Attribute of a Block. The command is designed with the logic that you have inserted an Xref of the Plan to raise a Section or Elevation. Then you can transfer texts from the Plan to the Section or Elevation by selecting at which level they should be annotated.

#### Tips:

Select the first letter of the text for proper alignment between the two drawings. You can continue selecting more texts after placing the first one.

### Change Xref XDDA

Changes the Xref used by commands like TTXX.

Allows you to select which Xref file commands like TTXX will read from during execution.

You can run this command as many times as you want in the same drawing and select different Xrefs. This is useful when working with multiple plan files or different floor plans.

#### Command Usage:

Use XDDA when you need to switch between different plan Xrefs while creating multiple sections or elevations from different parts of a building.

### Window Opening OPSPAR

Automatically draws window openings in elevations.

Opens a tab where you have options for repetitive automatic drawing of windows in elevation by selecting only the center of the opening or 2 points on screen.

#### Steps

- Specify the layer for 'Window Openings'.

- Configure window type in the options dialog.

- Select points inside wall areas to insert windows.

- Windows are drawn automatically according to settings.

Window opening configuration dialog

Select points successively in closed areas (or rectangle with 2 points) on screen and windows are drawn automatically according to the settings you made in the dialog.

Glass with openable/sliding parts

Glass with non-openable parts

Glass with Frame

Automatic window placement in elevation

#### Command Usage:

Use OPSPAR to quickly place multiple windows in building elevations. Configure the window type once, then simply click inside wall areas to insert windows automatically.

#### Tips:

For best results, make sure wall areas are properly closed polylines. The command detects closed areas and centers windows automatically.

---

#### Article 39: sdbox: Navigation Toolbar

**Original:** https://www.sdtopocad.net/index.files/TOOLBAR_PERIHGHSHS_EN.htm

## Navigation Toolbar

For AutoCAD 2010-20xx, BricsCAD, GstarCAD, ZwCAD

### Toolbar Overview

When the following Toolbar appears, you can navigate in the drawing with the mouse wheel and execute all the commands it contains.

Navigation is done with the mouse on the screen (middle wheel for zoom in, zoom out and pan).

### Toolbar Commands

### Command Explanations

The AutoCAD and SDBOX commands contained in the Toolbar have been selected so you can navigate in the Drawing, manage Layers and make changes.

---

#### Article 40: SDBOX Survey Plan Tools - Command Reference

**Original:** https://www.sdtopocad.net/index.files/TOPOGRAFIA_EN.htm

## Survey Plan Tools

SDBOX command reference for survey point handling, point-based drafting, coordinate tables, areas and survey plan production inside CAD

Step-by-step survey drafting guide: Download PDF

### Survey Units Setup TOPOUNITS

Sets the unit and angle conventions used by SDBOX survey-drawing commands.

For the survey convention used here, the Y axis is at 0.0000g and the X axis at 100.0000g.

The following are defined:

- Coordinate display format

- Linear and angular units

- Precision settings

- Scale factor for EGSA grid

Survey units configuration interface

#### Tips:

Use this command when preparing a survey drawing so the related SDBOX commands use consistent units, angular settings and precision.

### Import Objects from Coordinate File ITAX

Imports point symbols (blocks) or other block-based objects from a coordinate file.

Supports different coordinate-file layouts and lets you define how the imported values are assigned to block attributes.

Coordinate file import interface (click image for details)

#### Usage:

Use this command to import processed coordinate data as survey points, control points or other block-based objects.

### 3D Points Notification Update 3DLL

Controls whether SDBOX warns you when a selected point has a non-zero Z value in commands that use this option.

The same setting is also available in the ZLL command.

3D points notification settings

#### Note:

Use the warning when you want to be alerted that a selected point contains elevation information instead of Z=0.00.

### Drawing Elements Update with Points DMLL

Defines which blocks and attributes SDBOX uses to identify point codes when you type a point name during drafting.

The same point-recognition settings are used by ZLL and other commands that accept typed point codes.

Run this command after inserting new point blocks, or whenever SDBOX does not recognize point codes in the current drawing.

Drawing elements configuration for point-based drafting (click image for details)

### Rectangle with 3 Points MR3

Creates a rectangle from three consecutive points, selected on screen or entered by point code.

#### How it works

Select three consecutive points on screen or enter their point codes. SDBOX creates the corresponding rectangular polyline.

Rectangle created from 3 points

#### Note:

Useful for quickly creating rectangular building footprints or other rectangular geometry from known survey points.

#### Usage:

Use it when the required rectangle is defined by existing survey points and you want to avoid drawing each side manually.

#### Tips:

When typing point codes, use the automatic point search feature to quickly locate existing survey points in your drawing.

#### Command Sequence

### Rectangle with 2 Points MR2

Creates a rectangle from two opposite corner points, selected on screen or entered by point code.

#### How it works

Select two opposite corners on screen or enter their point codes. SDBOX creates the rectangular polyline defined by those corners.

Rectangle defined by diagonal corners

#### Note:

This is the quickest option when the two opposite corners of the required rectangle are already known.

#### Usage:

Useful for rectangular geometry when the two diagonal corner points are available.

#### Tips:

The rectangle will be created parallel to the current UCS (User Coordinate System). Ensure your drawing orientation is correct before using this command.

#### Command Sequence

### Spline with Points MSP

Creates a spline through points selected on screen or entered by point code.

#### How it works

Select points on screen or enter their point codes in sequence. SDBOX creates a spline passing through the selected points.

Spline curve created through multiple points

#### Note:

Useful for smooth irregular features such as curved boundaries, road edges or other surveyed linework.

#### Usage:

Use it where a smooth curve through a sequence of survey points is required.

#### Tips:

You can continue adding points until you press Enter. Use Undo (U) option to remove the last point if needed.

#### Point construction options

View the available point construction options

### Circle with 3 Points MK3

Creates a circle through three points selected on screen or entered by point code.

#### How it works

Select three non-collinear points on the screen or type their point codes. The command creates a circle passing through all three points.

Circle defined by 3 points on its circumference

#### Note:

The three points must not be in a straight line. The circle will be drawn regardless of the points' order.

#### Point construction options

View the available point construction options

### Circle with Center+Radius MKK

Creates a circle from a center point and radius; the center can also be entered by point code.

#### How it works

Select the center point (or type its code) and then specify the radius by selecting a second point or typing the radius value.

Circle defined by center point and radius

#### Tips:

You can type the radius value directly or pick a point to define the radius graphically. When typing point codes for the center, use the automatic point search.

### Arc with 3 Points MJL

Creates an arc through three points selected on screen or entered by point code.

#### How it works

Select three points: start point, second point (on the arc), and end point. The command creates an arc passing through all three points.

Arc defined by 3 points

#### Note:

Useful for curved features that are defined by three known survey points.

#### Point construction options

View the available point construction options

### Insert Images for Fitting or Excerpt ZIMIN

Inserts a raster image and can organize it on dedicated layers for background alignment or for use as an image extract within the drawing.

#### How it works

- Select the image you want to insert. For grayscale source material, a black-and-white version can be useful when you want a lighter background and clearer linework.

- Specify whether the image is black and white. SDBOX uses this choice when creating the corresponding image layer.

- Choose whether to create a dedicated layer when the image will later be used as a drawing extract.

Image insertion interface

#### Note:

The command is intended for raster backgrounds that need to remain organized separately from the main CAD geometry. Images can be placed on dedicated layers so they are easier to manage, align, display behind the drawing and reuse as drawing extracts.

#### Tips:

Use clear image filenames before insertion, because the generated layer names can reflect the image names and make larger drawings easier to manage.

See also: ZIMGEO (Automatic insertion of georeferenced images)

### Grid Drawing KNB, KNBS

Creates a coordinate grid for survey drawings, with spacing adapted to the current print scale.

#### KNB vs KNBS

KNB: Select two points that define the area; grid crosses are created using spacing appropriate to the print scale.

KNBS: Select two points and SDBOX creates the frame, grid, corner coordinates and grid-step labels on all four sides.

KNB (left) vs KNBS (right) grid creation

#### Usage:

Use KNB for a simple grid, or KNBS when you also need a complete frame with coordinate information and grid-step labels.

#### Tips:

The grid spacing automatically adjusts based on your drawing's print scale. For larger scale drawings (more detail), the grid spacing will be smaller.

### Grid Coordinate Annotation KNBT

Adds coordinate labels to selected grid intersections.

#### How it works

Select grid intersection points and the command automatically places coordinate text at those locations.

Automatic coordinate annotation on grid points

#### Note:

You do not need to snap manually to the exact grid intersection; the command identifies the grid vertex automatically. Text height is adjusted to the drawing scale.

#### Tips:

Use this after creating your grid with KNB or KNBS to automatically label coordinates at important grid intersections.

### Building Hatch (Open Area) PHKT

Creates the building indication line along points you specify, offset toward the building interior.

#### How it works

Select points along the building outline. SDBOX creates the corresponding dashed building line on the interior side.

Building hatch pattern for open (unclosed) areas

#### Note:

If the dashed line pattern is not displayed correctly after zooming or panning, run REGEN to refresh the drawing.

#### Usage:

Use this version when the building outline is not a closed boundary and you want to define the indication line point by point.

### Building Hatch (Closed Area) HKT

Select a point inside a closed boundary and SDBOX automatically creates the building indication line along its interior.

#### How it works

Pick a point inside a closed boundary. SDBOX detects the boundary and creates the corresponding dashed building line on the inside.

Automatic building hatch inside closed areas

#### Note:

If the dashed line pattern is not displayed correctly after zooming or panning, run REGEN to refresh the drawing.

#### Tips:

Useful when a closed building footprint already exists and you want to create the building indication without tracing it manually.

### Copy to Point MCC

Copies selected objects repeatedly to destination points selected on screen or entered by point code.

#### How it works

Select objects to copy using filter-based selection, then specify multiple destination points by either picking on screen or typing point codes.

Filter-based object selection (click image for details)

#### Object Selection:

Select the objects to copy using the available object filters.

#### Using typed point codes

You can define which point blocks are recognized and which block attribute contains the point code used during the command.

Details

#### 3D point warning

When this option is enabled, SDBOX warns you if a selected point has a Z value other than 0.00.

#### Point construction options

View the available point construction options

#### Note:

Select the copy base point on screen before placing the objects at the destination points.

### Offset to Point MOF

Creates an offset using points selected on screen or entered by point code.

#### How it works

Select an object to offset, then specify offset distance and side by picking points or typing point codes.

Offset operation using point codes

#### Note:

Useful when the offset direction or position is related to known survey points.

#### Usage:

Typical uses include parallel construction lines, setback lines and other offsets referenced to surveyed geometry.

### zzDistance ZDD

Measures successive distances and reports each result in the command line; points can also be entered by code.

#### How it works

The command is similar to CAD DIST, but it continues for successive measurements, keeps the results visible in the command line and can warn when a selected point has a non-zero Z value.

Continuous distance measurement with reporting

#### Command Sequence

#### Note:

Continue for as many measurements as needed; the previous distance results remain reported in the command line.

#### Tips:

Useful for quick verification of multiple distances in a sequence without having to write them down separately.

### Building Characteristic Text XKT

Inserts building-description text selected from a predefined dialog.

#### How it works

Select the required building description from the dialog and place the text at the required location in the drawing.

Building characteristic selection dialog

Building characteristic text placement

#### Usage:

Provides consistent building annotations while avoiding repeated manual typing.

#### Tips:

The available entries can be customized to suit the terminology used in your projects.

### RG OG Indication Text RGOG

Creates text annotations for planning and building lines using the selected geometry and offset information.

#### How it works

Select the start point, annotation direction and the side toward the property interior. Where an offset is provided, SDBOX can also place the corresponding building-line annotation.

RG (Planning) and OG (Building) line annotations

#### Command Sequence

#### Note:

If the first two points define the planning line, the corresponding building-line annotation can also be created when the required offset width is provided.

Text options for additional information (click image for details)

#### Tips:

Optional secondary text can be added below the planning-line annotation for project-specific references or notes.

Select the required line type. Details

### Property Area Calculation (Vertices, Sides & Area) ZID, ZIDS

Select an interior point of a closed area or an existing polyline with ZID, or define the area point by point with ZIDS. SDBOX places a named block at each vertex, annotates the side lengths, and calculates and inserts the area.

#### ZID vs ZIDS

- ZID: Select a point inside a closed area, or select an existing polyline.

- ZIDS: Define the area by selecting its boundary points.

The resulting property area is documented directly in the drawing with named vertex blocks, side lengths and the calculated area.

### Coordinate Tables ZPID, ZPPOL, ZPRP, ZPTR, ZPBL

Creates a drawing table containing the selected block names/codes, coordinates and elevations.

#### How it works

The command variants use the same workflow. Each variant stores its own suggested block types, attributes and table title for reuse.

Coordinate table creation interface (click image for details)

#### Command Variations:

- ZPID: Property vertices coordinates

- ZPPOL: Polygon vertices coordinates

- ZPRP: Benchmark / control-point coordinates

- ZPTR: Survey control-point coordinates

- ZPBL: Block coordinates

Details about coordinate table creation

### Table from File ZPFL

Select a data file and column separator, and SDBOX creates a table from the file contents.

#### How it works

Use delimited text data to create a CAD table made from drawing text and linework.

Details about file import and table creation

#### Note:

Common separators include comma, tab and semicolon; other separators can also be specified. Table text and spacing follow the relevant drawing settings.

#### Usage:

Useful for coordinate lists and other tabular information that needs to be presented directly in the CAD drawing.

### Export Coordinates to File ZXID, ZXPOL, ZXTAX, ZXREP, ZXTRI

Exports selected block data to a coordinate file, with one object per row.

#### How it works

The command variants use the same export workflow. Each variant stores its own suggested block types, attributes and output settings for reuse.

Coordinate export interface (click image for details)

#### Command Variations:

- ZXID: Export property vertices

- ZXPOL: Export polygon vertices

- ZXTAX: Export survey points

- ZXREP: Export benchmark / control points

- ZXTRI: Export survey control points

Details about coordinate export options

### Elevation Points in Section View MKO

Projects selected survey points onto a section axis defined by its left and right endpoints.

#### How it works

The process is as follows:

- Select the left and right endpoints that define the section axis.

- Select the output file and the point blocks to project. Their position relative to the section axis is calculated and written to the file.

Point selection for section projection (click image for details)

#### Note:

The first time MKO is used in a drawing, a dialog lets you define how point blocks and point-code attributes are recognized when entering point names.

#### Command Sequence

Export file configuration (click image for details)

Filter-based object selection (click image for details)

#### Tips:

After the export is created, it can be imported into a drawing with ITAX using Custom Blocks → SHM-OPSHS .

Each output row has the form CODE, X, Y, Z, L , where L is the point distance from the section axis.

Import projected points with ITAX command (click image for details)

#### Article 41: Survey plan with SDBOX - SDBOX Manual

**Original:** https://www.sdtopocad.net/index.files/TOPO_SDBOX_EN.htm

## Survey plan with SDBOX

#### 1 Initial drawing settings

- Recommended settings for topographic surveys are defined

- Layers, colors, line types and scale factors are specified

- Units are automatically configured according to topographic requirements

#### 2 Importing points and data

- Points from coordinate files (for example: Code, E, N, Z, Description)

- Reference points and characteristic points

#### 3 Drawing existing conditions

- Boundaries, buildings, fences, roads and other structures

- Natural elements and other survey lines

#### 4 Annotations, hatches and symbols

- Hatches are applied to buildings, land, and areas

- Symbols are inserted (trees, wells, columns, etc.)

- Annotations and indications are added

#### 5 Elevations, contours and DTM

- Elevation reference point is defined

- Levels and elevations are imported

- Triangles and contours are created

- Checking and smoothing is performed

#### 6 Grid, reference system and orientation

- Coordinate grid

- Reference system

- North arrow

#### 7 Property boundaries, areas and tables

- Drawing property boundaries and adjacent properties

- Area calculation

- Creating tables of vertices, sides and coordinates

#### 8 Title, legends and declarations

- The topographic title is inserted

- Legends for lines, symbols and hatches are completed

- Planning and building parameters, statements and other declarations are added

#### 9 Verification and delivery

#### 10 Printing to PDF

- Printing to PDF is done with one click

- Paper size and plot settings are selected automatically

- The result is a consistent, print-ready PDF

### How to continue

- Videos (detailed list with links to all steps)

- Detailed documentation in Quick links

So you can delve deeper exactly where you need it.

---

#### Article 42: What is SDBOX? - SDBOX Manual

**Original:** https://www.sdtopocad.net/index.files/WHAT_IS_SDBOX_EN.htm

## What is SDBOX?

### Why SDBOX?

- Organize the complete drawing workflow from source data to final deliverable

- Reduce repetitive drafting, checking and plotting tasks

- Improve consistency in layers, symbols, texts, tables, legends and title blocks

- Use map backgrounds, georeferenced images and geospatial data directly inside CAD

- Keep the final result as a standard editable CAD drawing

### What It Includes (Overview)

- Survey Plan Drafting — points, existing site conditions, boundaries, areas, coordinate tables, statements, legends and title blocks

- Maps & Geospatial Workflows — map backgrounds, Google Earth, georeferenced images, KML/KMZ, SHP, JSON/GeoJSON, GeoTIFF and world files

- Digital Terrain Modeling — triangulation, contours, cross sections, longitudinal profiles and cut & fill volumes

- Set-out Preparation — coordinates, axes, geometry and field-ready drawing information

- Building Surveys — floor plans, sections and elevations for as-built documentation

- CAD Productivity — scale-aware texts, symbols, blocks, dimensions, hatches, layers, images, cleanup tools and PDF output

Each section is designed to support engineering drawing production, not just generic CAD editing.

### Target Audience

SDBOX is built for professionals who need practical tools for fast, accurate and consistent drawing production inside CAD.

### How It Is Used

- SDBOX is installed once and becomes available through dedicated CAD menus, ribbon tabs and command tools.

- It does not replace the CAD environment; it extends it with production tools for surveying, terrain modeling, mapping, geospatial workflows and drawing automation.

- Users can start with the workflows they need most and gradually expand to additional tools over time.

- The final result remains a standard CAD drawing that can be edited, checked, plotted and exchanged normally.

### How to Continue

If you are just getting started, continue with “Getting Started with SDBOX” .

If your goal is a complete topographic deliverable, see “Survey Plan Drafting” .

If you already have experience, you can use the Search or Quick links for immediate access to commands, guides, and related material.

---

#### Article 43: sdbox: Import-Export

**Original:** https://www.sdtopocad.net/index.files/XYZOUT_EN.htm

## Import & Export Block

SDBox Design Software - Import Blocks with continuous numbering and optional coordinate export to file

### Import & Export Block ZZB / XYZOUT

Import Block into the Drawing with the ability for simultaneous export to file and multiple naming options during on-screen drawing.

This command allows you to import symbols with continuous numbering and fixed elements, up to complex usage with export of insertion coordinates to a file with predefined elements.

You have the ability to use the command from simple import of symbols with continuous numbering and fixed elements, to complex usage with export of insertion coordinates to a file with predefined elements.

XYZOUT command configuration interface

#### Command Overview:

The ZZB (or XYZOUT) command provides a comprehensive solution for importing point markers into CAD drawings while optionally exporting their coordinates to external files for use in other applications or devices.

### Basic Command Usage

Below is an example that uses most of the command's capabilities. Followed by examples for simpler uses of the command.

Main configuration dialog for XYZOUT command

#### Tip:

Always end the command with Enter or right-click, not with Esc, to ensure proper completion of the export file if configured.

### Export Options

#### Export

The points you select on screen are exported to a file of your choice with their coordinates and names.

#### Without Export

Only Block or Text is inserted into the drawing screen without export to file.

#### File Selection (>>)

Select your preferred file where the coordinates and names of the points you select on screen will be exported.

The command suggests a file with the drawing name and extension ".xyzout" so you can later distinguish, among many files, which files have been exported by the ZZB command (based on the extension).

Export option selection dialog

#### Usage:

Use export when you need to use point coordinates in other software (survey equipment, GIS applications, spreadsheets, etc.).

### File Format Configuration

In this section you define the format that each line of the file will have.

If you want to load the file into another program or device, it is often necessary to write specific text at the beginning and end of each line.

The formatting capabilities of each file line are divided (in the order shown above) as follows:

- What will be written at the beginning of each line

- Whether the point name will be written

- What will be the separator between name and X coordinate

- Whether the X coordinate will be written

- What will be the separator between X and Y coordinates

- Whether the Y coordinate will be written

- What will be the separator between Y and Z coordinates

- Whether the elevation Z will be written

- What will be written at the end of the line

File format configuration dialog

#### Preset Formats

Clear: Clears all file line format options.

Default -> code,x,y: Defines each file line as: Point Name, X, Y

Default -> code,x,y,z: Defines each file line as: Point Name, X, Y, Z

Default -> x,y,z: Defines each file line as: X, Y, Z

#### Note:

The file content is not deleted, and new command entries will be appended at the bottom. This allows you to accumulate points from multiple drawing sessions into the same file.

### Drawing Options

Drawing options configuration

#### Draw on Screen

Choose whether, in addition to export to file, Blocks or Texts will be drawn on the screen.

If you select no, then you use the command only for point export to file. In this case, you still select points and specify if you want their names. When you select a point, it will be drawn temporarily (and then automatically deleted) so you have an overview of what is being exported to the file.

The case of not drawing points (Block or Text) on the screen is typically used when there are already point codes in the Drawing and you simply want to export their coordinates to a file.

Object type selection

#### Object Type

Choose the type of object (Block or Text) that will be drawn for each point.

If you select Block, you have the ability to select Block type from the list on the right side of the tab shown below.

Also choose whether for the points drawn on screen, elevation will be given.

View saving option

#### Save View

If you select "Yes", then for each point you select on screen, a View with the same name is saved, which you can later search for with the "View" or "Vports" command of AutoCAD.

### Block Types

The command provides a library of pre-defined blocks for different point marking needs. Below is an analysis of the block list on the right side of the tab. For ease of writing the help, the Blocks have been numbered.

#### Key Block numbers

Block library with numbered blocks (1-68)

#### Key Block Categories

Blocks 1, 2 and 18 use the attribute “ZKOD” for point naming. It is recommended to use these Blocks when inserting points with this command, so that they can be clearly distinguished from other point types (e.g. points inserted with the ITAX command, where the corresponding attribute is named “KOD” ).

Block 1 (zSHM_Code.dwg) Contains only the attribute “ZKOD” for point naming and does not include elevation information.

Block 2 (zSHM_Code-H.dwg) Contains two attributes: “ZKOD” for point naming and “ZH” for elevation.

Block 18 (zSHM_Code.dwg & zSHM_H.dwg) In this case, two Blocks are inserted per point: one Block for the point and its name (attribute “ZKOD” ), and a second Block for the elevation (attribute “ZH” ). For the elevation Block, a new Layer named “****-H” is automatically created.

Blocks 3–5 and 20–22 (zSHM_ST1…6.dwg) These Blocks contain two attributes: “ZKOD” for point naming and “ZST1…6” for elevation. They are intended for different elevation display layouts, as the position of the name and elevation varies between Blocks.

Blocks 6–14 and 23–31 ( zSHM_KYK1…6.dwg, zSHM_QUA1…6.dwg, zSHM_ROM1…6.dwg ) These Blocks are typically used for simple point insertion with text enclosed in a circle , square , or diamond . They contain only naming attributes: ZSK1…6 (circles), ZSQ1…6 (squares), and ZSR1…6 (diamonds).

The naming convention of these Blocks and their attributes is intentionally consistent (same prefix and numeric suffix), allowing batch modifications using commands such as ZZATT , ZCH , ZCS , etc.

Blocks up to number 55 These are commonly used Blocks inserted by the ITAX and ZID commands and may also be used in combination with the current command.

Blocks 56–68 These positions are reserved for user-defined Blocks. Custom Blocks may be created in the \\SDBOX directory, following these rules:

- Block names must range from ZSHM_56.dwg to ZSHM_68.dwg .

- The corresponding slide files must be named xyzim56.sld to xyzim68.sld .

#### Tip:

The names of these Blocks and their attributes are similar (they have the same beginning and all end in a number) so you can make simultaneous changes to all with commands like "ZZATT", "ZCH", "ZCS", etc.

### Naming Options

Prefix configuration options

#### Prefix

A prefix is added to point names and can change predefined during the command execution.

For example, if you want points to have names A1, A2, A3, etc., the prefix is "A".

Fixed: The same prefix is suggested during the command.

Increase by 1: The next alphabetical (or numerical if you selected a number) is suggested each time.

Decrease by 1: The previous alphabetical (or numerical if you selected a number) is suggested each time.

Numbering configuration options

#### Numbering

Concerns the integer number that participates in the point name.

Fixed: The same number is suggested during the command.

Increase by 1: The next number is suggested each time.

Decrease by 1: The previous number is suggested each time.

Suffix configuration options

#### Suffix

A suffix is added to point names and can change predefined during the command execution.

The same rules apply as for the prefix above.

If neither Prefix nor number nor Suffix is selected, then Points are drawn on the drawing screen.

#### Naming Example

Example for understanding the order PREFIX - NUMBERING - SUFFIX:

If you make the following selections:

- PREFIX: "KA-" and fixed

- NUMBERING: from "1" and increase by 1

- SUFFIX: "ss" and fixed

Then the following names will be suggested during the command:

"KA-1 ss", "KA-2 ss", "KA-3 ss", "KA-4 ss", etc.

Size configuration options

#### Size Configuration

Block size or text character height.

The first time you run the command, a height proportional to the ltscale is suggested.

Selection >> : You are transferred to the drawing screen and select Block or Text that have the desired size.

Check size >> : You are transferred to the drawing screen where Text is temporarily drawn with the characteristics you have selected.

Scale: You see the suggested heights according to the print scale.

### Execution Example

After completing the configuration, the command continues for drawing on screen.

Select the 1st point on the drawing screen with the mouse. With Enter or right-click the command ends.

Either accept the suggested text with right-click or Enter, or type another. If you don't want a prefix press Space.

Either accept the suggested number with right-click or Enter, or type another. If you don't want a number press "~".

Either accept the suggested text with right-click or Enter, or type another. If you don't want a suffix press Space.

Either accept the suggested number with right-click or Enter, or type another, or calculate one by pressing "@".

[Z= 0.000]: The Z of the point as selected on screen is written.

Details for [@ = calculations] see: @ Calculations - Operations

Example of point insertion with configured naming

Continue with new points.

U=Undo: Undoes the last point insertion (and will not be recorded in the file either).

R=Change text position: The insertion point of the Block remains the same and the Attributes change position by quadrant. Use this option when the drawing is dense and you want the point name and elevation to be written in a clear area. This option does not work when Text is inserted.

With Enter or right-click the command ends.

Example of multiple points inserted with automatic numbering

If you press "Yes" the file opens containing what it had before the command and the new points you have inserted with the command.

Example of exported coordinate file

#### Notes:

The Block in position 6 with name "zSHM_KYK1.dwg" is inserted, on the drawing screen, at the same size as "Arithm-Kyklos.dwg" which is inserted with the commands "NNAR".

#### Command Usage:

From simple import of symbols with continuous numbering and fixed phrases, to complex usage with export of insertion coordinates to a file with predefined elements.

#### Tips:

If neither Prefix nor number nor Suffix is selected for point naming, then Points are drawn on the drawing screen.

Always end the command with Enter or right-click and not with Esc.

### Simple Example

Follows a simple example for the options you need to make in the command tab to insert texts in a circle as in the image below.

Simple example: texts in circles with automatic numbering

Options in the tab for simple circle text insertion:

Configuration for simple circle text insertion

Block options for this example:

Block selection for circle text insertion

#### Quick Setup:

For simple numbered points in circles: Select Block type "Text in circle", configure prefix/numbering/suffix as needed, disable export if not required, and set appropriate text height for your drawing scale.

---

#### Article 44: sdbox: Calculations & Operations

**Original:** https://www.sdtopocad.net/index.files/YPOLOGISMOI_KAI_PRAXEIS_EN.htm

## Calculations and Operations

For AutoCAD 2010-20xx, BricsCAD, GstarCAD, ZwCAD

### Overview

You have the ability in several commands to perform calculations and complex operations during their execution.

You can select numbers from the screen, calculate DH (height difference), perform operations, select Z of objects or points, and calculate Z with linear interpolation.

### Available Commands

Command interface for calculations

### E = Number Selection

E = Number selection

Select a number on the screen (from Text, Attribute, or Xref) or simply type a number.

### D = DH Calculation

D = DH calculation

Enter the floor level and the ceiling level, and the DH (height difference) is calculated.

For each level, select on the screen (from Text, Attribute, or Xref) or simply type the number.

### P = Operations

P = Operations

Operations with numbers that you select on the screen or type.

Operations interface - Click for details

### ! = Z Selection

! = Z selection

Select the Z (elevation) of a point or object.

Z selection interface - Click for details

### !! = Z with Linear Interpolation

!! = Z with linear interpolation

The Z of a point is calculated based on the slope of 2 other points that you select.

---

#### Article 45: sdbox: Calculate Z

**Original:** https://www.sdtopocad.net/index.files/YPOLOGISMOS_Z_EN.htm

## Calculate Z - Elevation Selection

SDBox Design Software - Command guide for Z coordinate calculation and slope analysis in CAD drawings

### Calculate Z Z Calculation

Select elevation from screen, input a number, pick object Z coordinate, or select point Z value.

This command allows you to obtain Z values (elevations) from various sources in your drawing for calculations, annotations, or slope analysis.

You can choose A , Z or P for the selection method:

- A: Select Text or Attribute from a Block.

- Z: Select any object to get its Z coordinate (Elevation).

- P: Select a point on a 3D object or input a Z value.

Calculate Z command illustration

#### Application:

This command is particularly useful for civil engineering, surveying, and topographic drawings where elevation data and slope calculations are required.

### Selection Methods

The command provides three different methods to obtain Z values, each suitable for different scenarios in your CAD workflow.

#### Tip:

During slope calculation procedures, the exact coordinates of your selection point are recorded for accurate distance measurement between successive points.

### Method A: Text/Attribute Selection

#### Description

Select any Text or Attribute of a Block in the drawing whose content represents the Z value you need.

If you are in a slope calculation procedure: The exact coordinates of the point you clicked to select the Text or Block are recorded for distance calculation to the next point.

The content of the Text or Attribute must be a number (e.g., "6.55", "+20.58", etc.) and should not contain other characters. Numbers within phrases (e.g., "Elevation: 6.55 m", "A= 20.58", etc.) cannot be used with this command.

#### Usage:

Use this method when your elevation data is already annotated as text in the drawing, such as spot elevations, survey points, or contour labels.

### Method Z: Object Elevation

#### Description

Select any object from the screen whose Z coordinate (Elevation) represents the Z value you need.

If you are in a slope calculation procedure: The exact coordinates of the point you clicked to select the object are recorded for distance calculation to the next point.

#### Note:

This method works with any object that has a Z coordinate property, including 3D polylines, points, blocks with elevation, and other 3D entities.

### Method P: Point Selection

#### Description

Case 1: Select any point (e.g., on a 3D object) on the screen whose Z coordinate represents the Z value you need.

Case 2: Select a point on the screen and type the Z value you want. This case is typically used in slope calculations.

If you are in a slope calculation procedure: The exact coordinates of the selected point are recorded for distance calculation to the next point.

#### Tip:

For the 2nd point in slope calculation, you follow one of the above methods again, maintaining consistency in your selection approach.

### Slope Calculation Procedure

After providing both points (with their Z values), the distance between the two selected points is displayed. Based on this distance, the slope will be calculated.

The distance between the two points as you selected them on screen is recorded. Based on this distance, the slope will be calculated, and you have 3 options:

### Distance Options for Slope Calculation

#### 1. Keep the displayed distance:

Simply press Enter or right-click to accept the automatically calculated distance.

#### 2. Type a different distance:

You can type another number for distance if required for correct slope calculation.

#### 3. Specify a new distance on screen:

If you selected Z values using method "A" (Text/Attribute selection), the distance refers to the exact points where the selection was made, not necessarily the insertion coordinates of the Block. If you want the exact distance between specific points, you can specify it on screen and use that for slope calculation.

#### Practical Application:

This flexibility in distance specification allows for accurate slope calculations even when your selection points don't correspond to the actual points whose horizontal distance you want to measure.

#### Important:

When two or more categories appear identical and have identical other properties, their differences may be in decimal values for Scale, Width, or Weight, which is why they appear in the analysis.

In such cases, you should investigate why objects that should have identical characteristics are drawn slightly differently from each other.

---

#### Article 46: sdbox: Legend

**Original:** https://www.sdtopocad.net/index.files/YPOMNHMATA_EN.htm

## Legends - Titles

SDBox Design Software – Insert legends, titles, notes, headers, and manage project databases in CAD drawings

### Insert Title block ZTITLOI

Select the type of Title to insert into the drawing. Then a Projects dialog opens where you can configure fields for each project or drawing, export a drawing list, etc.

The command, besides inserting a Title, also serves as a project database where project data and all created Drawings are stored.

Title selection dialog with categories and preview

#### Select category and title

Select a Category and the Title you want. Fields contained in the Title are shown in red. These fields are keywords and will be active in the next dialog that opens. For keywords you can add to your Titles see the command TCDS .

#### Layer selection

Details: Layer Selection .

#### Insertion point

Choose the point where the Title will be placed in the Drawing.

After placement, the following dialog opens which has active all fields that exist in the Title. (You can open and configure this dialog outside the command with ZZBASE .)

You can add a new Project, add or modify Drawings in an existing one, remove a Drawing or Project, export a Drawing List, etc.

Project and drawing management dialog with fields and list

#### Project selection or creation

Enter the name of the New Project and add it to the List, or select a Project from the existing ones listed.

When the dialog opens, the Project you selected in the last use of the command in any Drawing is suggested.

The Project you select contains the Drawings displayed in the right part of the Dialog.

Project list and new project entry

#### Fill in fields

Fill in the corresponding fields that are enabled, i.e., existed as keywords in the Title you inserted.

For keywords you can add to Titles so that the corresponding fields become active, see the command TCDS .

Entries in each field can be the same for all Drawings (with only Drawing Titles, Scale, and date changing) or all can be different in each Drawing.

The first time you fill in the Project fields you must create a “New Drawing” in the lower part of the dialog for them to be saved.

Fields for project data entry

#### Drawing management

New Drawing: Saves entries in all dialog fields. Each new Drawing can have all dialog fields the same except some from Type, number, or subject of the Drawing.

Remove Drawing: Removes whichever Drawing you have selected from the Drawing List.

Save: Saves entries in all dialog fields for whichever Drawing you have selected from the Drawing List.

Project File: Opens the project file read by the command. You can use this command to make bulk changes to all Drawings.

Each line of the file records the code of each field and the entries you have entered.

Drawing list and management buttons (New, Remove, Save, etc.)

#### Project file example

Example of a project data file

#### Project and drawing directory

#### Note:

The command ends, fields are not inserted into the Title, and opens (via Windows) the folder where the project database files and Drawings are located. This folder can also be network shared.

Details: ERGACHDIR .

Project and drawing directory structure

#### Drawing list export

#### Note:

The command ends, fields are not inserted into the Title, and opens a file containing the basic project data and a Drawing List that you can format.

Drawing list exported to a file

Example of a drawing list with project data

#### Title update after selection

If you select a Drawing and press OK, the Title you inserted at the beginning is updated:

Title block with fields filled after dialog confirmation

#### Tips:

If a Project has many Drawings, it is recommended after inserting the 1st Title to format the initial Title (in the example General_Title-1.dwg where you can set other fonts or alignment types like Fit, left, etc.), save it with another name, and insert that one into the remaining Drawings of the Project.

### Change Title Directory TITLOICHDIR

Defines the path where the folders with Title files (dwg) are located. The command reads this path and opens a dialog with Titles for insertion. The path can also be network shared.

You define a new address for the folder zzTitloi which contains the subfolders – categories of Titles.

You can set the Title library to be read from a shared folder on the network so that many users can use and enrich the same library.

Dialog to select the title library folder

#### How to change the library path

To change the address of the Title library you simply need to open (with the above window) the folder zzTitloi wherever you have placed it.

Once you open the folder, without selecting anything else with the mouse, and press Save , the address is recorded and this is set as the library address used by the command ZTITLOI .

In the File Name position, “Do not change anything here!” is written to remind you that after opening the folder zzTitloi you do not need to select any file or anything else, just press Save .

#### Tips:

You can change the ZTITLOI address as many times as you want, even within the same Drawing.

The general folder zzTitloi can also have another name of your preference.

You can open the zzTitloi folder from the ZTITLOI command dialog with the “General address” button.

### Change Projects Directory ERGACHDIR

Defines the address of the file zzErga.txt which contains the names of Projects participating in the database. Files with each Project's fields are created at this address. You can also set a network address.

To change the address of the project database, you simply need to open (with the above window) the file zzERGA.txt wherever you have placed it.

Once you open the file, the address is recorded and this is set as the Projects address used by the command ZTITLOI .

Dialog to select the projects database file

Example content of the projects database file

#### Tips:

You can change the address of the file zzERGA.txt as many times as you want.

You can open the project database folder from the ZTITLOI command dialog with the “Projects and Drawings address” button.

### Field Codes for Titles TCDS

If you are designing a new Title drawing or modifying an existing one, you can add fields by copying codes from the opened dialog and pasting them into the corresponding Text on screen.

Dialog listing all available field codes for titles

#### Using field codes

You can format your own Title drawing (dwg) as you like and in the positions of the corresponding fields place texts (Text or Mtext) that record the above codes.

When inserting a Title (with the command ZTITLOI ) when the dialog opens and you fill in the fields, the corresponding texts on screen will be replaced with the entries.

#### Notes:

Field codes are case-sensitive and must be placed exactly as shown in the dialog.

You can combine multiple codes in a single text line.

If a code is not recognized, the field will remain empty in the inserted title.

### Projects Database ZZBASE

Opens the Titles and Drawings dialog which you can correct and complete for the next use of the ZTITLOI command or for archiving project data.

Projects database management dialog

You can add a new Project or a new Drawing to an existing Project, or format the existing ones.

For details see the command ZTITLOI above.

#### Command Usage:

Use this command to review, edit, or archive project data without inserting a title into a drawing.

It is also useful for batch updates across multiple drawings in the same project.

### Insert Short Title (Stamp) PHSTI2

Inserts 5 lines of Text (Project, Client, location, Date, Study type, Drawing type, scale) and a Logo (small). The phrases inserted remain in AutoCAD's memory for insertion into the same or another Drawing.

It is a quick way to insert a stamp with the drawing data, and if you have many similar Drawings you are informed by the command what you wrote in the last one.

Details: See more .

#### Tips:

You can modify the default stamp by editing the drawing logotipo_mikro.dwg (see command ZSTI ).

The stamp is inserted at the current text height and layer settings.

### Edit Short Designation ZSTI

Opens the drawing logotipo_mikro.dwg that participates in the PHSTI2 command, and you can edit and complete it so that it is inserted ready into every drawing automatically.

This command allows you to customize the small logo and text layout used by PHSTI2 .

After editing, save the drawing in the same location with the same name.

Editing the small logo drawing used in PHSTI2

### Notes - Headers YYTT

Opens a dialog from which you select the type of text (Notes, Small-Medium-Large Title, Small-Medium-Large Wide Title) to insert into the drawing to determine the size and font.

Text heights are proportional to the print scale.

Dialog for selecting text type and size

#### Steps

- Select the type you want. Based on the selection, font and text size will be determined.

- You can also give a scaling factor from the default letter heights of the command.

- Enter the LAYER for the selected text type.

- Pick the starting point for the text.

- Specify the text direction (horizontal by default).

- Type the text lines.

Example of inserting a wide medium title

Resulting text inserted in the drawing

#### Command Usage:

Use this command for consistent annotation and title blocks across drawings, especially when working with multiple scales.

### Line Types Legend ZYPGR

Legend of line types of linear objects selected from the Drawing.

A list is created on screen (in legend form) showing the various line types you have selected based on Linetype, Scale, Layer, Color , etc., and provides an explanation for each distinct type: Line, Pline, Mline, Xline, Ray, Spline, Arc, Circle, Ellipse, 3D Face, and Region in the drawing.

Text Height is set automatically according to the print scale.

Example of a line types legend

Details: See full documentation .

### Block Symbols Legend ZYPBL

Legend of Block types selected from the Drawing.

A list is created on screen (in legend form) showing the various Block types you have selected based on Block Name, size, Layer, Color , etc., and an explanation for each Block.

Example of a block symbols legend

Details: See full documentation .

### Hatch Legend ZYPHH

Legend of Hatch types selected from the Drawing.

A list is created on screen (in legend form) showing the various Hatch types you have selected based on Type, Scale, Layer, Color , etc., and an explanation for each line.

The Text Height of texts is set automatically according to the print scale. Each Hatch is drawn as the corresponding ones in the Drawing.

Example of a hatch patterns legend

Details: See full documentation .

### Text Types Legend ZYPTT

Legend of Text, Mtext, and Rtext types selected from the Drawing.

A list is created on screen (in legend form) showing the various text types existing in the Drawing based on TextStyle, Color, size, Layer , etc., and explanations that you have entered in a file with the commands ZYPTT1 or ZYPTT2 .

It usually serves cases where drawing texts are organized with different colors and Text Styles per category.

Example of a text types legend

Details: See full documentation .

### Layer Legend ZYPLAY

Layer legend with explanations and categorization of Drawing objects.

A list is created on screen (in legend form) showing the elements of the Layers that exist in the Drawing.

For each Layer the following are displayed: name, explanation, the types of objects it contains, and the various color and linetype .

The command is used either during electronic drawing delivery where you explain for each Layer what it contains and its meaning, or to have an overview of the objects existing in each Layer.

Details: See full documentation .

### Window-Door Legend YPPP

For openings where you have drawn a tag with the commands SPART (for window types) or SPORT (for door types), you can add a legend to the drawing with predefined explanations for the type of openings.

The explanations of the opening types are defined in a file  and you can use them in any Drawing.

Details: See full documentation .

#### Command Usage:

This legend is particularly useful in architectural drawings to provide a clear key for window and door types used in the project.

---

#### Article 47: sdbox: Property data

**Original:** https://www.sdtopocad.net/index.files/ZAA_EN.htm

## Area Measurement - Vertices - Sides (ZID, ZIDS, ZIK, ZIKS)

SDBox Design Software - Command guide for area calculation with vertex numbering and side dimensioning

### Area Measurement (ZID) ZID

Select an internal point within a closed area (ZID) or select a Polyline or define an area by selecting its points (ZIDS), in which Blocks are drawn with names at each vertex, the sides, and its area with a corresponding table.

Example of area measurement with vertices and sides

#### Command Operation

ZID: Select a point inside the closed area and near the vertex from where you want the numbering to start, or select a Polyline (and then the starting point for numbering).

ZIDS: Select point by point (preferably counterclockwise) the area you want to measure.

#### Note:

The command automatically detects closed areas formed by lines, polylines, or other linear objects. For irregular shapes, use ZIDS to define the area manually.

#### Calculation Results

After area calculation, you're presented with the perimeter, area, and number of vertices. You can then proceed to insert measurement elements into the drawing.

Area measurement configuration interface

### Point Selection (ZIDS) ZIDS

Manual point-by-point selection for area measurement when no closed boundary exists or for irregular shapes.

The ZIDS command allows you to manually define the measurement area by selecting points in sequence. This is particularly useful for:

- Irregular or complex shapes

- Areas without clearly defined boundaries

- Temporary measurement areas

- Verification of automatic detection

#### Selection Tip:

For accurate area calculation, select points in order (preferably counterclockwise). The command automatically closes the area between the first and last point.

#### Workflow

- Run ZIDS command

- Select points in sequence defining the area perimeter

- Press Enter when all points are selected

- View calculation results

- Choose insertion options for vertices and sides

#### Typical Usage:

ZIDS is commonly used in topographic surveys where property boundaries are not clearly defined by continuous lines, or for measuring sub-areas within larger plots.

### Vertex Blocks Configuration

Configure the Blocks that will be inserted at each vertex of the measured area.

From the configuration dialog, you define the elements of the Blocks that will be inserted at each vertex. All suggested Blocks, except for the vertex numbering Attribute, also have a 2nd Attribute where you can write the vertex elevation or notes (boundary marker, unmarked vertex, etc.).

The 3 basic Blocks for vertices have the following differences:

Type 1: Contains 4 Layers (point, small circle, attribute for vertex numbering, and attribute for vertex description).

Type 2: All elements are in 1 Layer and does not have a small circle.

Type 3: Includes in 1 Layer all elements of the first type.

#### Additional Settings

You can also make settings for displaying the area and sides:

Settings for area and side labeling

Additional configuration options

#### Layer Selection:

You can select different layers for vertices, sides, area text, and the summary table. This allows for better organization and control of visibility in your drawing.

### Results & Area Labeling

Automatic insertion of vertices, sides, and area label with optional summary table.

After closing the dialogs and selecting the corresponding Layers, the vertices and sides are automatically inserted, and you give the final position for the area label.

If there are already drawn vertices in the area you selected, the program suggests not inserting new ones in their place. This functionality serves the measurement of adjacent areas:

Measuring adjacent areas without duplicate vertices

#### Important:

If you already have drawn vertices in an area, you can run ZID to insert only the area with the sequence of vertices as they are drawn without inserting new ones.

#### Summary Table

You then have the ability to insert a vertices coordinate table with a Title of your choice, number of vertices, perimeter, and the area.

Vertices coordinate summary table

#### Practical Application:

This feature is particularly useful for survey documentation, property plans, and legal descriptions where a formal table of coordinates is required alongside the graphical representation.

### Building Vertices (ZIK/ZIKS)

Building vertices for Topographic or Cadastral surveys with automatic numbering and Block insertion.

Building vertices measurement

You can insert building vertices in three ways:

##### ZIK

Select an internal point of a closed Building area where Blocks with names are drawn at each vertex. (Insertion and numbering are done automatically).

##### ZIKS

Select Building points and Blocks with names are drawn at each vertex. (Insertion and numbering are done automatically).

##### ZZK

Insert Building vertex Blocks into the Drawing with multiple naming possibilities during insertion and drawing on screen (and export to file capability).

For BUILDING VERTICES TABLE : ZPIK

Building area measurement example

#### Survey Tip:

For cadastral surveys, use ZIK for complete building footprints and ZIKS for partial or complex building outlines. The automatic numbering ensures consistency across survey documents.

#### Compatibility:

These commands are designed to work with standard topographic and cadastral survey workflows, producing output compatible with survey software and regulatory requirements.

---

#### Article 48: sdbox: Compass and arrows

**Original:** https://www.sdtopocad.net/index.files/ZBOR_EN.htm

## Insert North Sign or Directional Arrow

SDBox Design Software - Command guide for inserting and managing north signs, directional arrows, and symbol libraries in CAD drawings

### North Sign / Arrow Insertion ZBOR

Insert a North sign or directional arrow Block from a library into the drawing area, with size automatically scaled according to the print scale.

This command opens a selection dialog (tab) where you can choose from a library of pre-defined north signs and directional arrows. The selected symbol is inserted into your drawing at a size that will be clearly visible when printed, based on the current plot scale.

#### Steps

- Run the command ZBOR .

- Specify the Layer for the inserted symbol.

- A dialog opens, displaying available symbols (Blocks) and their previews (Slides).

- Select the desired symbol from the list or by clicking its preview image.

- You are prompted to pick an insertion point in the drawing.

- Specify a rotation angle or press Enter for horizontal (0 degrees).

- After insertion, you can choose to insert another instance, change the symbol, mirror it, or finish.

ZBOR command selection dialog with symbol list and previews

Select a point in the drawing for the symbol's insertion. Then either pick a second point to define the rotation angle or type an angle value. Pressing Enter, Space, or right-clicking accepts the default angle of 0 degrees (horizontal).

After inserting a symbol, you are presented with options to continue inserting more symbols.

#### Post-Insertion Options

- R (Reverse direction): Mirrors the Block along its insertion axis without affecting text readability. Useful for linear symbols to fit clean areas of the drawing.

- S (Change Symbol): Re-opens the symbol selection dialog to choose a different Block.

- Y (Yes/Continue): Continues inserting another instance of the current symbol.

- N (No/End): Ends the command and reports how many symbols were inserted.

"Symbol Descriptions" button in the ZBOR dialog

#### Symbol Library Management

The symbols are stored as drawing files ( .dwg ) and their preview images as Slide files ( .sld ) in the folder \\SDBOX\SBL_zBO .

- You can enrich the library with your own symbols.

- Symbol files must be named sequentially: zBo01.dwg to zBo63.dwg .

- For each .dwg file, a corresponding Slide file with the same name must be created (using AutoCAD's MSLIDE command) for previews to appear in the dialog.

- When creating a new symbol Block, use the AutoCAD BASE command to define its insertion point.

#### Notes:

When creating a new Drawing - symbol, also set its insertion point using the AutoCAD base command.

The folder \\SDBOX\SBL_zBO can contain a maximum of 63 Drawings (in consecutive numerical order). Drawings beyond this number are not included in the command.

For each drawing, create the corresponding slide with the same name using the AutoCAD mslide command.

You can also open the description file using the ZBOR1 command.

You can also open a file listing all participating Blocks using the ZBORLIST command.

You can also open the symbols folder using the ZBORDIR command.

#### Command Usage:

The command's ability to save the values you enter for the Block's attributes (Layer, etc.) and suggest them for the next Block is useful when you want to insert multiple Blocks with the same attribute values, allowing for changes each time if needed.

The symbol descriptions displayed in the command's dialog help you distinguish between visually similar Blocks.

#### Tips:

The selections you make each time you run the command are saved and suggested thereafter, both in the same drawing and in any other drawing.

If you agree with the suggested values (the last used ones) when the dialog opens, you can press Enter or Space to accept them and proceed directly to inserting the symbol in the drawing area.

### Symbol Descriptions ZBOR1

Opens the file containing the descriptions for the North Sign or Arrow symbols that are inserted into the Drawing with the ZBOR command.

This command opens the file \\SDBOX\ZBOR.dat where you can view, edit, or add new descriptions. These descriptions appear in the left-hand list of the ZBOR command dialog, helping you identify symbols.

#### File Creation / Editing

Running the command opens the description file in your default text editor. If the file does not exist, it will be created.

Each line in the description file follows this format:

```text
SymbolFileName ? Description Text
```

For example, to add the description "Entrance Arrow" for the symbol file zBo09.dwg , add the following line:

```text
zBo09 ? Entrance Arrow
```

This will appear in the ZBOR dialog list as: zBo09_Entrance Arrow .

Reminder message about instructional text in the file header

Example of the ZBOR.dat description file

#### Notes:

You can copy the list of symbols using the ZBORLIST command into the description file. Then, by deleting the .dwg extensions, you can complete the descriptions.

You can open the folder containing the symbols with the ZBORDIR command.

#### Command Usage:

The symbol descriptions displayed in the ZBOR command dialog help you distinguish between visually similar Blocks.

The ZBOR1 command can also be executed from within the ZBOR dialog by pressing the "Symbol Descriptions" button.

#### Tips:

It is recommended to add descriptions for all Blocks that participate in the ZBOR command. This gives you a complete overview and makes it easy to insert the desired Block each time.

### Symbol List with Icons ZBORLIST

Opens a file containing a list with the names of all North Sign or Arrow symbol drawings (Blocks) that are available for insertion with the ZBOR command.

This command opens the file \\SDBOX\SBL_zBO_LIST.dat . This file lists all Drawing files (Block definitions) that exist in the \\SDBOX\SBL_zBO folder and are available for use with the ZBOR command.

Example output of the ZBORLIST command

#### Notes:

Every time you run the command in any drawing, it always opens the same file at \\SDBOX\SBL_zBO_LIST.dat .

If you wish, you can save this file under a different name or in a different location for your own use.

#### Command Usage:

The file that opens lists all the Drawing files (Blocks) in the \\SDBOX\SBL_zBO folder that participate in the ZBOR command. It is not used as an input file by any command.

It opens so you can have an overview of the available Blocks, or to copy the Block names (typically to paste them into the symbol description file and complete the descriptions).

#### Tips:

You can run the ZBORLIST command first, leave the file open, and then run the ZBOR1 command. With both files open, you can easily copy and paste the symbol names to complete the descriptions.

You can open the folder containing the symbols with the ZBORDIR command.

### Open Symbols Folder ZBORDIR

Opens (via Windows Explorer) the folder containing the drawing files and slide files for the North Sign or Arrow symbols used by the ZBOR command.

This command opens the folder \\SDBOX\SBL_zBO . This folder contains the actual symbol drawing files ( .dwg ) and their corresponding preview slide files ( .sld ) that are displayed in the ZBOR command dialog.

Contents of the SBL_zBO symbols folder

#### Folder Management

You can create new symbols or rename existing ones directly in this folder.

- When renaming a Drawing file, also rename its corresponding Slide file.

- When creating a new Drawing, you must also create its corresponding Slide using the AutoCAD MSLIDE command.

- Symbol file names must follow the pattern: zBo01 to zBo63 (in consecutive numerical order).

- When creating a new symbol Block, use the AutoCAD BASE command to define its insertion point.

#### Notes:

You cannot move this folder to a different location, because the ZBOR command reads only from the specific path \\SDBOX\SBL_zBO .

#### Command Usage:

Use this command to directly manage the source symbol files: add new ones, delete unused ones, or update existing symbols.

#### Tips:

The folder \\SDBOX\SBL_zBO can contain a maximum of 63 Drawings (in consecutive numerical order). Drawings beyond this number are not included in the command.

---

#### Article 49: sdbox: Blocks in circle

**Original:** https://www.sdtopocad.net/index.files/ZKYK_EN.htm

## Insert Blocks in a Circle

SDBox Design Software – Insert Blocks with automatic scale and attribute management

### Insert Circle Symbol ZKYK

Insert a Block in a circle on the drawing screen, with size proportional to the print scale, and selection from a symbol library.

Select a Block from the symbol library for insertion into the drawing screen. These symbols are inserted into the Drawing at a size proportional to the print scale so they print clearly.

You can enrich the library with your own symbols and use them easily in any Drawing, as you can also add a description for each Block to remind you of its use.

ZKYK command dialog with symbol list and preview

#### Layer selection

See the General Command ' Layer Selection '.

#### Symbol selection

Opens a dialog where the Blocks (with their descriptions) located at \\SDBOX\SBL\zKykloi are displayed.

You can modify existing or create new Blocks in this location.

When creating a new Block, you must name it from zKy01.dwg to zKy63.dwg (in continuous numerical sequence) and also create the corresponding slide with the same name for it to appear in the images on the right side of the dialog.

From the list on the right or the images on the left, you can select the symbol to insert into the Drawing. Double-click automatically switches to the drawing screen for insertion of the selected symbol.

If a drawing-symbol does not have a slide, “No Slide” appears in its place.

Block editor

On the drawing screen you pick:

- A point to insert the first Block, and

- A second point for the angle, or type an angle value.

If you do not want to specify an angle, after the insertion point press Enter , right-click, or Space , and the symbol is inserted horizontally.

Block editor

You enter values for the attributes of the Block you are inserting. The first time a Block is inserted, the value “x” is suggested for each field.

The values you enter are saved and suggested again when you insert the next Block.

#### Options after insertion

R = Reverse direction: Changes the Block’s orientation (AutoCAD mirror command) without changing text reading direction. Useful for linearly-arranged Blocks to fit in a clean area of the drawing. For symmetrical Blocks (circles, squares) this option shows little visual difference.

S = Change Symbol: Re-opens the command dialog where you can choose a different symbol type for insertion.

Y = Yes / Continue: The command continues with insertion of the next symbol.

N = No / End: The command ends and reports how many symbols were inserted into the Drawing.

#### Notes:

Do not rename existing drawings. (The command will not work correctly.)

When creating a new Drawing-symbol, also define the insertion point with the AutoCAD base command.

The folder \\SDBOX\SBL_zO can contain a maximum of 63 drawings (in continuous numerical sequence). More drawings will not participate in the command.

For each drawing, create the corresponding slide with the same name using the AutoCAD mslide command.

Besides the ZKYK command, you can open the description file with the ZKYK1 command.

Besides the ZKYK command, you can open a file listing the Blocks that participate in the command with the ZKYKLIST command.

Besides the ZKYK command, you can open the symbols folder with the ZKYKDIR command.

#### Command Usage:

The command’s ability to save the values you enter for the Block’s fields and suggest them for the next Block is useful when you want to insert a Block into the Drawing with the same field values and still be able to make changes each time.

The symbol descriptions displayed in the command dialog help you distinguish visually similar Blocks from each other.

#### Tips:

The choices you make each time you run the command are saved and suggested thereafter when you run the command again in the same Drawing or in any other Drawing.

If you agree with what is suggested (as the last choice) when the dialog opens, you can press Enter or Space to accept them and continue with symbol insertion on the drawing screen.

### Symbol Descriptions ZKYK1

Opens the file that contains the descriptions of the symbols inserted into the Drawing with the ZKYK command.

Opens the file \\SDBOX\ZKYK.dat where you can view, correct, or add new descriptions that appear in the dialog opened by the ZKYK command.

In this example we have descriptions for 2 symbols: zKy01.dwg and zKy21.dwg .

The procedure is as follows:

Write a new line in the opened file:

```text
"zKy01 ? Room Number"
```

That is: Symbol name “ ? ” Description .

This will appear in the ZKYK command dialog as: “zKy01__Room Number” .

The list in the dialog will be updated after you run the command again.

Editing the symbol description file

A message appears reminding you that the file contains instructions at the top that you should not delete.

Descriptions are given to remind you of each symbol’s use. They are not used for anything else.

#### Notes:

You can copy the symbol list with the ZKYKLIST command into the description file, delete the “.dwg” extensions, and complete the descriptions.

You can open the symbols folder with the ZKYKDIR command.

#### Command Usage:

The symbol descriptions that appear in the ZKYK command dialog help you distinguish visually similar Blocks from each other.

The ZKYK1 command can also be executed from the ZKYK dialog by pressing the “Symbol Descriptions” button.

#### Tips:

It is recommended to give descriptions for all Blocks that participate in the ZKYK command so you have a complete overview and can easily insert the Block you want each time.

### Circle Symbols List ZKYKLIST

Opens a file containing all the drawing-symbols inserted into the Drawing with the ZKYK command.

Opens the file \\SDBOX\SBL_zO_LIST.dat which lists by name all the Drawings contained in the folder \\SDBOX\SBL_zO .

You can copy any names you want and paste them into the file \\SDBOX\ZKYK.dat (of the ZKYK1 command) and complete the descriptions.

List of all symbols in the ZKYK library

#### Notes:

Every time you run the command in any drawing, it always opens the same file at \\SDBOX\SBL_zO_LIST.dat .

You can save it with a different name or in a different location for your own use.

#### Command Usage:

The opened file, which lists by name all the Drawings contained in the folder \\SDBOX\SBL_zO that participate in the ZKYK command, is not used as a file in any command.

It opens so you can have an overview of the existing Blocks, or to copy the Block names (usually to paste them into the symbol description file and complete the descriptions).

#### Tips:

You can first run the ZKYKLIST command, leave the file open, then run the ZKYK1 command, so with both files open you can perform the above copy-paste operations.

You can open the symbols folder with the ZKYKDIR command.

### Open Folder ZKYKDIR

Opens the folder containing the drawing-symbols inserted into the Drawing with the ZKYK command.

Opens (via Windows) the folder \\SDBOX\SBL_zO that contains the drawing-symbols (*.dwg) and the corresponding slides that appear in the ZKYK command dialog.

You can create new Drawings (and corresponding Slides) in this folder.

The names of the Drawing-symbols and their corresponding slides can be from zKy01 to zKy63 (in continuous numerical sequence) and nothing else.

Contents of the ZKYK symbols folder

#### Notes:

You cannot move the folder to another location because the ZKYK command only reads the address \\SDBOX\SBL_zO .

#### Command Usage:

Do not rename existing drawings. (The command will not work correctly.)

When creating a new Drawing, also create the corresponding Slide with the AutoCAD mslide command.

#### Tips:

When creating a new Drawing-symbol, also define the insertion point with the AutoCAD base command.

The folder \\SDBOX\SBL_zO can contain a maximum of 63 Drawings (in continuous numerical sequence). More drawings will not participate in the command.

---

#### Article 50: sdbox: BLocks table

**Original:** https://www.sdtopocad.net/index.files/ZPBL_EN.htm

## Block Attribute Table

SDBox Design Software - Command guide for creating tables displaying Block attribute contents and coordinates in CAD drawings

### Block Table - Main Command ZPBL

A table is drawn on screen with columns displaying the contents of selected Block Attributes and their coordinates.

This command creates a formatted table in your drawing. The table columns display the values of specific Attributes and the coordinates (X, Y, Z) of the Blocks you select. The table text height is automatically set according to the print scale for clear output.

#### Command Overview

The process is the same across the various command variants ( ZPBL, ZPB1-4, ZPPOL, ZPTR, ZPRP, ZPID, ZPIK ). The only differences are in the suggested Blocks to select, the Attributes to record, and the table title, which are saved and suggested in each new use per variant.

The key difference between ZPBL and ZPB1 - ZPB4 is that ZPBL allows free selection of Blocks and Attributes each time, while ZPB1 - ZPB4 save your selections and suggest them in every new drawing. This lets you use them as categories of default settings for frequent or specific use cases.

Final table example

#### Steps

- Run the command ZPBL .

- Define Block names and Attributes: Specify which Block names will participate and which Attributes (and in what order) will be recorded in the table.

- Select Blocks in the drawing: Choose the Blocks you want in the drawing area using selection filters.

- Configure Table Properties: A dialog opens where you set the table's properties (sorting, columns, etc.).

- Pick Insertion Point: Select a point on screen or two points if you selected "Select area in drawing."

- Choose Sorting: Select how the table rows should be sorted.

- Enter Title: Finally, choose a title and the table is automatically drawn.

#### Detailed Process

##### 1. Define Block Names and Attributes

You define the names of the Blocks that will participate and the Attributes (and their order) that will be recorded in the table.

Block selection interface. Details

##### 2. Select Blocks in the Drawing

Select the desired Blocks in the drawing area based on filters.

Selection with filters. Details

##### 3. Configure Table Properties

After selecting the Blocks, the following dialog appears where you configure the table properties:

Table properties configuration dialog

##### 4. Pick Insertion Point and Area

Then select a point on the screen or two points if you have selected "Select area in drawing."

##### 5. Choose Sorting Method

- Alphanumeric Sorting: Table rows are sorted alphanumerically (a, b, c,... 1, 2, 3, 4,…,10, 11..).

- In the order they were selected: The rows show the object data in the order you selected them on screen.

- In the order they were drawn: Chronological order of drawing (oldest appears first).

Choose Sorting Method

##### 6. Final Table Creation

Finally, you choose a title and the table is automatically drawn. The text height of the final table drawn on screen is set automatically according to the print scale.

Title of table

#### Notes:

The table is created as an AutoCAD Block itself, allowing for easy movement, scaling, or modification as a single entity.

Ensure the Blocks you select contain the Attributes you specified; otherwise, those cells will appear empty in the table.

#### Command Usage:

Use this command to generate coordinate lists, door/window schedules, equipment lists, or any other tabular data stored in Block Attributes directly within your drawing, ensuring the information is always linked to the graphical objects.

#### Tips:

Use the ZPB1 to ZPB4 variants for repetitive tasks. Configure them once with your typical Blocks and Attributes, and they will be ready-to-use in any project.

You can edit the table after creation by exploding it (if necessary) or by modifying the source Block Attributes, which can be updated in the table using related SDBox commands.

### Preset Configurations ZPB1, ZPB2, ZPB3, ZPB4

Pre-configured versions of the ZPBL command that save and recall your preferred Block and Attribute selections.

These four commands function identically to ZPBL but with a key advantage: they remember your settings. When you run ZPB1 for the first time and configure your Block names, Attributes, and table title, these settings are saved. The next time you run ZPB1 in any drawing, it suggests those saved settings.

#### Purpose and Use

Create dedicated "profiles" for different table types you frequently need:

- ZPB1: Could be configured for a Coordinate List of Survey Points .

- ZPB2: Could be configured for a Door Schedule .

- ZPB3: Could be configured for a Window Schedule .

- ZPB4: Could be configured for an Equipment List .

#### Notes:

The settings for ZPB1-4 are stored in the SDBox system folder and are user-specific, traveling with you across different drawings and projects.

#### Tips:

Invest time initially to set up ZPB1-4 correctly. This upfront work will save significant time in the long run on every project.

### Polygon Point Table ZPPOL

Specialized variant for creating tables from polygon point Blocks.

This command is pre-configured to work with Blocks typically used for polygon vertices or boundary points in surveying. It suggests common Attributes like "POINT_NUMBER", "EASTING", "NORTHING", "ELEVATION".

### Trigonometric Station Table ZPTR

Specialized variant for creating coordinate tables for trigonometric station Blocks.

Pre-configured for Blocks representing geodetic control points or trigonometric stations, suggesting relevant Attributes.

### Reper Point Table ZPRP

Specialized variant for creating tables for reper (benchmark) point Blocks.

Tailored for Blocks used for benchmarks or reference points, with appropriate default Attribute selection.

### Door Schedule Table ZPID

Specialized variant for generating door schedule tables from door Blocks.

This command expects Blocks representing doors and suggests Attributes like "DOOR_NUMBER", "WIDTH", "HEIGHT", "MATERIAL", "FIRE_RATING".

### Window Schedule Table ZPIK

Specialized variant for generating window schedule tables from window Blocks.

Pre-configured for window Blocks, suggesting Attributes like "WINDOW_NUMBER", "WIDTH", "HEIGHT", "TYPE", "GLAZING".

---

#### Article 51: sdbox: Floor plan level mark

**Original:** https://www.sdtopocad.net/index.files/ZST_EN.htm

## Floor Level Markers

SDBox Design Software - Command guide for inserting floor level and height markers with calculation capabilities

### Introduction to Floor Level Markers

The ZST command is a comprehensive solution for managing floor levels and heights in architectural CAD drawings.

This powerful add-on for AutoCAD and compatible CAD systems provides intelligent block insertion with automatic value tracking per category, ensuring consistency across complex architectural projects. The system remembers your previously entered values for each level type and suggests them in subsequent uses, dramatically improving workflow efficiency.

Whether you're working on residential buildings, commercial complexes, or industrial facilities, ZST streamlines the process of marking floor levels, ceiling heights, slab elevations, and other critical vertical dimensions.

#### Key Benefits:

- Automatic value tracking by category (levels, heights, slabs, etc.)

- Scale-aware block insertion for optimal print quality

- Extensible symbol library with custom block support

- Built-in calculation capabilities for height differences and operations

- Consistent formatting across all level markers in a project

#### Typical Applications:

- Architectural floor plans with multiple level changes

- Interior design documentation with ceiling height variations

- Structural drawings with slab and beam elevations

- Facility management documentation

- Building renovation projects with existing level surveys

### Insert Floor Level/Height with Calculations ZST

Inserting floor level or height markers into the drawing, with organization and retrieval of values by category, calculation capabilities, number selection from the screen, etc.

Selection from a library for inserting a Block with size proportional to the print scale.

#### Main Features

- Category-based value management: Values are stored and suggested per field type

- Scale-aware insertion: Blocks automatically scale for optimal print quality

- Calculation capabilities: Built-in calculator for height differences and operations

- Screen selection: Pick values directly from existing text in the drawing

- Extensible library: Add your own custom symbols and descriptions

Overview of available level marker symbols

#### Input Options During Command Execution

- Enter: Accept suggested value (e.g., 0.20)

- Type a number: Enter specific value

- E: Select a number from existing text or block in the drawing

- D: Calculate height difference by selecting floor and ceiling levels

- P: Perform mathematical operations with selected numbers

- ! or !!: Select Z coordinate of object or point with linear interpolation

#### Workflow Tip:

The command's ability to remember previously entered values for each field type means you can quickly insert multiple level markers with consistent values. When working on a project with standardized floor-to-floor heights, this feature saves significant time.

### Symbol Reference Guide

ZST includes a comprehensive library of level and height markers organized by category:

##### Basic Level Markers

zSt01: Inserted as is (no value prompt)

zSt02: General Room Level Field: +STATHMI

zSt03: General Level 2 Field: +STATHMI2

##### Height Markers

zSt08: Room Height (floor to ceiling) Field: IPSOS

zSt09: Height to False Ceiling Field: IPSOSF

zSt10: General Height 2 Field: IPSOS2

##### Combined Markers

zSt15: Level and Room Height Fields: +STATHMI, IPSOS

zSt16: Level and Height to False Ceiling Fields: +STATHMI, IPSOSF

zSt17: Level and Height 2 Fields: +STATHMI, IPSOS2

##### Construction Markers

zSt22: Slab - Final Floor Fields: +STATHMITEL, +STATHMPL

zSt24: Floor - Concrete Fields: +STATHMID, +STATHMIB

zSt25-28: Upper - Lower Levels Fields: +STATHMIANO, +STATHMIKATO

#### Naming Convention:

Fields starting with +STATHMI are for levels (positive numbers get + sign). Fields starting with IPSOS are for heights (no sign added). This allows easy selection of all level or height fields using wildcards like +STATHMI* in other commands.

### Insert Level Block ZSTA

Opens a tab showing available Blocks (with their descriptions) located at \\SDBOX\SBL\zStathmes

You can modify existing blocks or create new ones in this location. When creating new blocks, name them zSt01.dwg to zSt63.dwg (in continuous numerical sequence) and create corresponding slides with the same name to display in the right panel of the tab.

Block list

#### Creating Custom Blocks

- Create your block drawing in AutoCAD

- Name it zSt01.dwg to zSt63.dwg (next available number)

- Use MSLIDE command to create slide file with same name

- Place both files in \\SDBOX\SBL\zStathmes folder

- Run ZSTA command to verify appearance

### Symbol Descriptions ZST1

Opens the file \\SDBOX\ZSTA.dat containing symbol descriptions displayed in the left list of the tab.

Edit this file to add or modify descriptions for symbols. Each line should follow the format: "zSt16 ? Level-Height to false ceiling"

This will appear in the tab list as: "zSt16__Level-Height to false ceiling"

Editing symbol descriptions

#### Description Tips:

Descriptions should clearly indicate the block's purpose. Use consistent terminology across similar blocks. Descriptions are for your reference only and don't affect block functionality.

### Symbol List ZSTLIST

Opens a tab showing all available blocks with their descriptions.

This provides a comprehensive overview of all level marker symbols in your library, helping you choose the appropriate block for each situation.

#### Usage:

Use ZSTLIST when you need to browse all available symbols or when setting up a new project to ensure you have all required markers.

### Open Folder ZSTDIR

Ends the command (no symbol inserted) and opens the folder containing the drawing symbols (*.dwg) and corresponding slides.

You can rename existing drawings or create new ones. When renaming, also rename the corresponding slide file. When creating new drawings, create corresponding slides using AutoCAD's MSLIDE command.

Symbols and slides folder structure

### Advanced Features & Customization

#### Creating Custom Blocks

You can create your own level marker blocks with specific attributes:

#### Notes with Custom Text

Blocks zSt38-zSt51 include fields for notes (attributes: NOTE.., N1, etc.). These values are also stored and suggested in subsequent uses.

Level marker with additional note fields

#### Best Practices:

- Use consistent base points for all blocks

- Maintain similar text heights for readability

- Test blocks at various scales before production use

- Document custom blocks in your office standards

- Regularly back up your custom symbol library

#### Project Setup:

For new projects, set up your standard level markers first. Enter typical values once, and ZST will remember them throughout the project. This ensures consistency across all drawings and team members.

---

#### Article 52: sdbox: Blocks in boxes

**Original:** https://www.sdtopocad.net/index.files/ZTET_EN.htm

## Insert Symbols in Boxes

SDBox Design Software - Command guide for inserting blocks with attributes in boxes or arrows

### Symbols in Boxes ZTET

Insert a Block in a box on the drawing screen with size proportional to the print scale, selected from a symbol library.

Selection of Blocks from a symbol library for insertion into the drawing screen. These symbols are inserted into the Drawing with a size proportional to the print scale so they print clearly.

You can enrich the library with your own symbols and use them easily in any Drawing, as for each Block you can also provide a description to remind you of its use.

#### Command Interface

When you run the ZTET command, a dialog opens showing all available symbols from the library with their preview images and descriptions.

ZTET command interface with symbol library

#### Symbol Selection

The dialog displays symbols (with their descriptions) that exist in the folder \\SDBOX\SBL\zTetragona . You can modify existing ones or create new Blocks in this location.

When creating new Blocks, they must be named zTe01.dwg to zTe63.dwg (in continuous numerical sequence) and you should also create corresponding slides with the same name using AutoCAD's MSLIDE command so they appear in the images on the right side of the dialog.

#### Layer Selection:

The first step is to select the layer where the "Block with box" will be inserted. You can use standard layer selection methods or predefined layer configurations.

#### Insertion Process

Select on the drawing screen:

- A point for inserting the 1st Block

- A second point for angle or type an angle value

If you don't want to specify an angle, after the insertion point press Enter , right-click, or Space and the symbol will be inserted horizontally.

Block editor

#### Attribute Values

You enter values for the Block's attributes that you have inserted. The first time a Block is inserted, the value "x" is suggested for each field.

The values you enter are saved and suggested after inserting the next Block. This feature is useful when you want to insert Blocks into the Drawing with the same field values and be able to make changes each time.

#### Continuation Options

R=reverse direction: Changes the Block's direction (AutoCAD's MIRROR command) without changing text reading direction. Useful for Blocks with linear arrangement.

S=change Symbol: Reopens the command dialog where you can select another symbol type for insertion.

U/Y=continue: The command continues with inserting the next symbol.

N=end: The command ends and informs you how many symbols were inserted into the Drawing.

#### Important Notes:

Do not rename existing drawings. (The command will not work correctly)

When creating a new Drawing - symbol, also set the insertion point using AutoCAD's BASE command.

The folder \\SDBOX\SBL_z[] can contain a maximum of 63 Drawings (in continuous numerical sequence). More drawings do not participate in the command.

For each drawing, create the corresponding slide with the same name using AutoCAD's MSLIDE command.

#### Command Usage:

The command's ability to save the values you enter for Block fields and suggest them for the next Block serves cases where you want to insert Blocks into the Drawing with the same field values and be able to make changes each time.

The symbol descriptions displayed in the command dialog help you distinguish between visually similar Blocks.

#### Tips:

The selections you make each time with the command are saved and suggested from then on when you run the command again in the same Drawing or any other.

If you agree with what is suggested (as the last selection) when opening the dialog, you can press Enter or Space to accept them and continue with symbol insertion into the drawing screen.

### Symbol Descriptions ZTET1

Opens the file containing descriptions of symbols inserted into the Drawing with the ZTET command.

Opens the file \\SDBOX\ZTET.dat where you can view, correct, or add new descriptions that appear in the dialog opened with the ZTET command.

Symbol descriptions file

A message appears reminding you that the file to be opened contains instructions at the top that you don't need to delete.

#### Adding Descriptions

In this example we have descriptions for 2 symbols: zTe02.dwg and zTe08.dwg.

The process is as follows: A new line is written in the opened file:

```text
zTe02 ? Space - Room
```

That is: Symbol name "?" Description or more detailed:

DWG file name (without extension) Question mark Your description

This will appear in the ZTET command dialog as "zTe02__Space - Room" .

Description file format example

#### Notes:

You can copy the list of symbols with the ZTETLIST command to the description file and, after deleting the ".dwg" extensions, complete the descriptions.

You can open the folder containing the symbols with the ZTETDIR command.

#### Command Usage:

The symbol descriptions displayed in the ZTET command dialog help you distinguish between visually similar Blocks.

The ZTET1 command can also be executed from the ZTET dialog by clicking the "Symbol Descriptions" button.

#### Tips:

It is recommended to provide descriptions for all Blocks that participate in the ZTET command so you have a complete overview and can easily insert the desired Block each time.

### Symbols List ZTETLIST

Opens a file that includes all drawing-symbols inserted into the Drawing with the ZTET command.

Opens the file \\SDBOX\SBL_z[]_LIST.dat where all Drawing names contained in the folder \\SDBOX\SBL_z[] are written.

List of available symbols

You can copy any names you want and paste them into the file \\SDBOX\ZTET.dat (of the ZTET1 command) and complete the descriptions.

#### Notes:

Every time you run the command in any drawing, the same file at address \\SDBOX\SBL_z[]_LIST.dat always opens.

If you want, you can save it with a different name or in a different location for any personal use.

#### Command Usage:

The file that opens and contains with their names all the Drawings contained in the folder \\SDBOX\SBL_z[] that participate in the ZTET command is not used as a file in any command.

It opens so you can have an overview of the Blocks that exist or to copy the names of the Blocks (usually to paste them into the symbol description file and complete descriptions).

#### Tips:

You can first run the ZTETLIST command, not close the file, and then run the ZTET1 command, so with both files open you can do the above copying and pasting.

You can open the folder containing the symbols with the ZTETDIR command.

### Open Folder ZTETDIR

Opens the folder containing the drawing-symbols inserted into the Drawing with the ZTET command.

Opens (via Windows) the folder \\SDBOX\SBL_z[] that contains the drawing-symbols (*.dwg) and the corresponding slides that appear in the ZTET command dialog.

Symbols folder contents

You can create new Drawings (and corresponding Slides) in this folder.

The names of the Drawing-symbols and corresponding slides can be zTe01 to zTe63 (in continuous numerical sequence) and nothing else.

#### Important:

Do not rename existing drawings. (The command will not work correctly)

You cannot move the folder to another location because the ZTET command only reads the address \\SDBOX\SBL_z[] .

#### Command Usage:

When creating a new Drawing, also create the corresponding Slide using AutoCAD's MSLIDE command.

#### Tips:

When creating a new Drawing - symbol, also set the insertion point using AutoCAD's BASE command.

The folder \\SDBOX\SBL_z[] can contain a maximum of 63 Drawings (in continuous numerical sequence). More drawings do not participate in the command.

---

#### Article 53: View management commands referenced in an older English article

**Original source:** https://www.sdtopocad.net/index.files/ZVIM_EN.htm

The older article also describes the following commands that **do exist** in the current English CUIX:

- **`ZVK`:** Views for dimensioning or locating columns, walls and beams.
- **`ZKKP`:** Views used when dimensioning and numbering doors, windows and other openings.
- **`ZVM`:** Save drawing views to revisit particular display areas.
- **`ZVV`:** Recall saved views.
- **`ZVBL`:** View-block-related command, also referenced by the old source.

The old import-specific procedure has been omitted because its command is absent from the current English CUIX.

---

#### Article 54: sdbox: Export Blocks

**Original:** https://www.sdtopocad.net/index.files/ZXBL_EN.htm

### Command: ZXBL

Command: ZXBL

Block data is exported to a file where each row contains the contents of desired Attributes and the coordinates of the Blocks you select.

The process is the same in the various versions of the command, and the only difference is in the suggested Blocks that are selected, the Attributes that are recorded, and the file that is saved and suggested in each new use per version.

### Export File Definition

You define the export file (the path you choose is saved for later use of the command):

Export file selection dialog

You can define the export file as Excel or another file type of your choice.

### Block and Attribute Definition

You define the names of the Blocks that will participate and the Attributes (and in which order) that will be recorded in the file:

Block and Attribute Selection

### On-Screen Selection with Filters

You select the desired Blocks on the drawing screen based on filters:

Filter-based selection

After selecting the Blocks, the command asks if you want to open the file.

### File Output Example

Exported file example

Note:

The Attribute values that have been recorded are displayed with quotation marks so you can distinguish them from the values recorded based on Block properties (coordinates, Z, Block Name).

When an Attribute has no value, then only the quotation marks "" are recorded in the corresponding position in the file. You can replace them with any other value you wish overall.

Generally, you can remove the quotation marks overall or the spaces written between fields.

### Related Commands

ZXBL, ZXB1-4, ZXPOL, ZXTR, ZXRP, ZXTAX, ZXID

---

#### Article 55: sdbox: Blocks Legend

**Original:** https://www.sdtopocad.net/index.files/ZYPBL_EN.htm

## AutoCAD Block Types Legend

SDBox Design Software - Command guide for block type management and documentation in CAD drawings

### Introduction to Block Management

Professional CAD drawings utilize blocks and symbols extensively for standardized components, annotations, and repetitive elements. The SDBox Block Legend tools provide comprehensive solutions for managing, documenting, and analyzing block usage within AutoCAD, BricsCAD, GstarCAD, and ZwCAD drawings.

This documentation covers the complete workflow for block management, from creating visual legends to detailed analysis and configuration. These tools are essential for:

- Creating professional drawing legends for printing and documentation

- Maintaining block libraries and standards

- Identifying inconsistencies in block usage and properties

- Exporting block data for reports and inventory management

- Configuring custom explanations for different block types

- Managing block counts and statistics

#### Professional Applications:

These tools are particularly valuable in architectural, mechanical, electrical, and plumbing drawings where standardized symbols represent equipment, fixtures, and components. The ability to quickly generate block legends and analyze block usage ensures consistency across project documentation and facilitates quality control processes.

The commands described in this guide are part of the SDBox CAD add-on, which extends the functionality of various CAD platforms with specialized tools for design professionals.

### Block Types Legend ZYPBL

Legend of block types selected from the drawing, with explanation of each type from a list.

Creates a list on screen (in legend form) showing the various block types present in the drawing based on Block Name, Size, Layer, Color , etc., with explanations. Each row of the legend includes the count of blocks found in the drawing with identical characteristics.

Text Height is set automatically according to the print scale. Blocks are drawn at the same size they appear in the drawing.

#### Steps

- Select blocks to include in the legend.

- Choose a Layer for the "Block Legend".

- Sort the legend by: BLname / Layer / Color / LType / LtScale / XScale / YScale.

- Pick the insertion point for the legend.

#### Command Sequence

#### Sorting Options

- BLname: By Block Name. (B)

- Layer: By drawing layer of the block. (L)

- Color: By color. (C)

- LType: By Linetype. (T)

- LtScale: By Linetype Scale. (S)

- XScale: By X scale. (X)

- YScale: By Y scale. (Y)

Example of block legend created

#### Notes:

The Bname, scale and other details written on the right in small letters can be deleted after the command completes, when you are preparing the legend for printing.

These details are shown to clarify the differences between block type categories.

#### Command Usage:

Besides inserting a block legend for printing, you can insert the legend to detect small differences in other properties of various categories (such as size or color bylayer , etc.) and correct the blocks they belong to.

#### Tips:

When 2 or more categories appear identical and have identical other properties, their differences are in decimal values for BlockHeight, Width, Oblique or Rotation , which is why they appear in the legend.

If you have such a case, you should investigate why blocks that should have identical characteristics are drawn slightly differently from each other.

The command name ZYPBL is an abbreviation of "z YPomnima BLock" (Block Legend).

#### Block Selection

Select as many blocks as you want from the Drawing. (ALL = select all blocks)

After selection, blocks will be analyzed and categories will emerge according to block type, size, Layer, color, etc.

#### Layer Selection

See the General Command ' Layer Selection '

#### Sorting Order

You have the ability to choose in what order the various block categories will appear in the Legend.

#### Insertion Point

Select the top-left point of the Block Legend to be created. After this selection, the Block Legend is drawn.

Inserting legend into drawing

#### Legend Layout Explanation

On the left, the Layer of each category is written.

In the middle, the Block is drawn.

On the right, the explanation of the category is written and below that the remaining details of the category.

#### Explanation Configuration

Commands that open editing files: ZYPBL1 , ZYPBL2

In these files you can write the explanation for each block type.

Block types in explanations are separated according to Block Name and the color of the blocks.

#### First Execution Message

This message appears (usually the first few times you run the command) when nothing has been written in the Explanation file.

The command will continue normally but after each block type the phrase "without description" will be added.

It is recommended to update the explanation file so that in each block legend the explanations are automatically included.

### Selection - Configuration ZVFE

Opens a tab where you can view and edit the files that participate in various commands.

You can also select which file category each command will read when executed.

Command files configuration interface

#### Configuration Management:

Use ZVFE to centrally manage all configuration files for SDBox commands. This is particularly useful when working on collaborative projects where multiple team members need to access the same standardized configuration settings for block legends and explanations.

### Editing - 1,2 ZYPBL1, 2

Select which of the 2 available files the ZYPBL command will read during execution to write the correct explanation text according to Block name.

By typing ZYPBL1 or ZYPBL2 you define which file the command will read (1 or 2) accordingly, and you can also edit it if you want.

You can do the same by running the above ZVFE command.

#### File Creation / Editing

File opening question

If you select No then you have simply set the ZYPBL command to read the "1" file and the command ends.

If you select Yes the same as above is set and the command continues by opening the Explanation file for the Block Legend:

File confirmation dialog

#### Adding Explanations

Adding new explanations

ZYPBL1: Creates and updates file //SDBOX/YPOMNHMA_BLOCK1.dat

ZYPBL2: Creates and updates file //SDBOX/YPOMNHMA_BLOCK2.dat

Each time you run one of the above commands, the corresponding .dat file is set as default and the ZYPBL command searches for explanations in it.

If you don't run either of the 2, then YPOMNHMA_BLOCK1.dat is set as default.

#### Notes:

As mentioned above, when you reach the point where the explanation files are fully defined, then you use the ZYPBL1 and ZYPBL2 commands only to determine which file the ZYPBL command will read.

That is, when asked if you "want to open the file" by pressing No or Esc.

#### Command Usage:

Whenever you want to configure the explanation file or define which file the ZYPBL command will read for explanations.

#### Tips:

To create and configure the explanation files for the first times, it is recommended to export from a typical drawing the Block names with the ZBLIST command or detailed characteristics with ZBLS.

From the files that open with the above commands you can copy the Block names and Color to file "YPOMNHMA_BLOCK1.DAT" or "YPOMNHMA_BLOCK2.DAT".

### Drawing Block List ZBLIST

Opens a Notepad file containing a List with the names of Blocks and Xrefs contained in the Drawing.

The file is always \\SDBOX\BLOCKS_LIST.dat and all Block Names and Xrefs that have been defined in the Drawing are exported.

You can, among others, use this command to copy the Block names to the Explanation files and then complete the descriptions.

Blocks List from drawing

#### Workflow Integration:

Combine ZBLIST with ZYPBL1/2 to create a standardized block library for your organization. Export the block names from your template drawings, then use them to populate explanation files that can be shared across your team for consistent documentation.

### Detailed Block List ZBLS

Opens a file of your choice containing a detailed List (Name, Layer, Color, Scale, etc.) of the Blocks that you select in the Drawing.

You select export file and number of Blocks from the Drawing which are analyzed, divided into categories and each category's elements (Name, Color, Layer, Ltype, Scale, Rotation) are exported to the file.

Export file selection

Select file for exporting the elements of each category of blocks you select in the Drawing.

Block selection from drawing with filters

Detailed block list export

You have the ability to choose in what order the various block categories will be written to the file.

#### Notes:

When you export block elements of the Drawing to MsWord (*.doc) or Excel (*.xls) files, the export files are in "Tab delimited text (txt)" format. If you want, after opening the file you can save it in normal doc or xls format.

#### Command Usage:

After exporting the Block elements to a txt file, you can copy the Block names and Color and paste them into the ZYPBL1 and ZYPBL2 command files, completing explanations for the Block Legend.

#### Tips:

When 2 or more categories appear identical and have identical other elements, then their differences are in the decimals of numbers for Scale, Width, or Rotation, and that's why they appear in the file.

If you have such a case, you should investigate why blocks that you want with identical characteristics are drawn slightly differently from each other.

#### Best Practices for Block Management:

Use ZBLS regularly during drawing reviews to identify inconsistencies in block usage. The detailed export allows you to:

- Verify that all team members are using the same block standards

- Identify blocks with non-standard properties or scaling

- Document block usage for project specifications and inventory

- Create audit trails for quality assurance processes

- Track block counts and statistics for project management

### Complete Block Management Workflow

Follow this professional workflow to implement comprehensive block management in your CAD projects:

- Initial Analysis: Use ZBLS to export all block types and their properties from your project drawings

- Configuration: Use ZYPBL1 to create explanation files with standardized descriptions for each block type

- Quality Check: During drawing creation and review, use ZYPBL to generate legends and identify inconsistencies

- Inventory Management: Use ZBLIST to create block inventories for project documentation and asset tracking

- Team Standardization: Use ZVFE to distribute configuration files to all team members

- Continuous Improvement: Regularly update explanation files based on project requirements and new block types

#### Implementation Strategy:

Start by implementing these tools on a pilot project to develop your organization's standard block library. Once refined, roll out the standardized configuration across all projects to ensure consistency in symbol usage, improve drawing quality, and streamline documentation processes.

#### Integration with Other SDBox Tools:

The Block Legend tools work seamlessly with other SDBox commands for text legends (ZYPTT), line type legends (ZYPGR), and general drawing management. Consider implementing a comprehensive documentation system that includes all these tools for complete drawing standardization.

---

#### Article 56: sdbox: Lines Legend

**Original:** https://www.sdtopocad.net/index.files/ZYPGR_EN.htm

## AutoCAD Line Types Legend

SDBox Design Software - Command guide for line type management and documentation in CAD drawings

### Line Types Legend ZYPGR

Legend of line types selected from the drawing, with explanation of each type from a list.

A legend (as a block) of the line types of linear objects selected from the Drawing.

It displays a list on screen (in legend form) showing the various line types you have selected, based on Linetype, Scale, Layer, Color , etc., and provides an explanation for each distinct type: Line, Pline, Mline, Xline, Ray, Spline, Arc, Circle, Ellipse, 3D Face, and Region in the drawing.

Text Height is set automatically according to the print scale.

#### Steps

- Select objects to include their Linetype in the legend.

- Choose a Layer for the "Line Legend".

- Sort the legend by: LType / Layer / Color / LtScale / LWeight.

- Pick the insertion point for the legend.

#### Sorting Options

- LType: By Linetype. (T)

- Layer: By drawing layer of the object. (L)

- Color: By color. (C)

- LtScale: By Linetype Scale. (S)

- LWeight: By Linetype Weight. (W)

Example of line legend created

#### Notes:

The color, scale and other details written on the right in small letters can be deleted after the command completes, when you are preparing the legend for printing.

These details are shown to clarify the differences between line type categories.

#### Command Usage:

Besides inserting a line legend for printing, you can insert the legend to detect small differences in other properties (such as size or color bylayer , etc.) and correct the objects they belong to.

#### Tips:

When 2 or more categories appear identical and have the same other properties, their differences may be in decimal values for Scale or Weight , which is why they are shown in the legend.

In such cases, you should investigate why objects that should have the same properties are drawn slightly differently.

The command name ZYPGR is an abbreviation of "z YPomnima Grammon" (Line Legend).

#### Object Selection

Select as many objects as you want from the Drawing. (ALL = select all objects)

After selection, objects will be analyzed and categories will emerge according to line type, size, Layer, color, etc.

See the General Command ' Layer Selection '

You have the ability to choose in what order the various line categories will appear in the Legend.

Select the top-left point of the Line Legend to be created. After this selection, the Line Legend is drawn.

Inserting legend into drawing

#### Explanation configuration

Commands that open editing files: ZYPGR1 , ZYPGR2

In these files you can write the explanation for each line type.

Line types in explanations are separated according to Linetype and color.

### Selection - Configuration ZVFE

Opens a tab where you can view and edit the files that participate in various commands.

You can also select which file category each command will read when executed.

Command files configuration interface

### Editing - 1,2 ZYPGR1, 2

Select which of the 2 available files the ZYPGR command will read during execution to write the correct explanation text according to Linetype name.

By typing ZYPGR1 or ZYPGR2 you define which file the command will read (1 or 2) accordingly, and you can also edit it if you want.

During Line Legend insertion, the explanations you have registered in the files of this command are written in the Drawing.

You can do the same by running the above ZVFE command.

#### File creation / editing

If you run the command for the first time and no file exists yet, the above message appears.

First execution message

ZYPGR1: Creates and updates file //SDBOX/YPOMNHMA_GRAMMON1.dat

ZYPGR2: Creates and updates file //SDBOX/YPOMNHMA_GRAMMON2.dat

Each time you run one of the above commands, the corresponding .dat file is set as default and the ZYPGR command searches for explanations in it.

If you don't run either of the 2, then YPOMNHMA_GRAMMON1.dat is set as default.

Esc or No: The command ends and file //SDBOX/YPOMNHMA_GRAMMON2.dat is set as the one that the ZYPGR command (Line Legend) will read.

Yes: Again the above file is set as default and the command continues by opening it for editing.

#### Adding explanations

Adding new explanations

If the explanation file is empty then it opens automatically for adding explanations.

Each line of the explanation file is as follows:

```text
Linetype ? Color ? ...explanation text
```

e.g. For drawing lines that are on Layer "Hidden" and have Linetype "DASHED", have color 5, you want the phrase "Hidden Edges" to be written as explanation in the Legend, then you must add the following line to the file:

```text
DASHED ? 5 ? Hidden Edges
```

When you run the ZYPGR command and select such lines in the Line Legend, it will appear:

```text
(Layer: Hidden) DASHED   -----------   Hidden Edges

                               Ltype: DASHED  color: 5   LtScale: 1.0
```

#### Notes:

As mentioned above, when you reach the point where the explanation files are fully defined, then you use the ZYPGR1 and ZYPGR2 commands only to determine which file the ZYPGR command will read.

That is, when asked if you "want to open the file" by pressing No or Esc.

#### Command Usage:

Whenever you want to configure the explanation file or define which file the ZYPGR command will read for explanations.

#### Tips:

To create and configure the explanation files for the first times, it is recommended to export from a typical drawing for you the Linetypes with the ZGRLIST command or detailed characteristics with ZGRLS.

From the files that open with the above commands you can copy the Linetypes and Color to file "YPOMNHMA_GRAMMON1.DAT" or "YPOMNHMA_GRAMMON2.DAT".

### Drawing Line List ZGRLIST

Opens a Notepad file containing a List with the names of Linetypes contained in the Drawing.

The file is always \\SDBOX\LTYPES_LIST.dat and all Linetype Names that have been defined in the Drawing are exported.

You can, among others, use this command to copy the Linetype names to the Explanation files and then complete the descriptions.

Linetypes List from drawing

### Detailed Line List ZGRLS

Opens a file of your choice containing a detailed List (Ltype, Layer, Color, Scale, etc.) of the objects (Line, Pline, etc.) that you select in the Drawing.

You select export file and number of objects from the Drawing which are analyzed, divided into categories and each category's elements (Ltype, Layer, Color, Scale, etc.) are exported to the file.

Export file selection

Select file for exporting the elements of each category of objects you select in the Drawing.

Object selection from drawing

Detailed object selection with filters

You have the ability to choose in what order the various line categories will be written to the file.

#### Notes:

When you export line elements of the Drawing to MsWord (*.doc) or Excel (*.xls) files, the export files are in "Tab delimited text (txt)" format. If you want, after opening the file you can save it in normal doc or xls format.

#### Command Usage:

After exporting the Line elements to a txt file, you can copy the Linetypes and Color and paste them into the ZYPGR1 and ZYPGR2 command files, completing explanations for the Line Legend.

#### Tips:

When 2 or more categories appear identical and have identical other elements, then their differences are in the decimals of numbers for Scale, Width, or Weight, and that's why they appear in the file.

If you have such a case, you should investigate why objects that you want with identical characteristics are drawn slightly differently from each other.

---

#### Article 57: sdbox: AutoCAD Text Legend (ZYPTT) - SDBox Design Software

**Original:** https://www.sdtopocad.net/index.files/ZYPTT_EN.htm

## AutoCAD Text Types Legend

SDBox Design Software - Command guide for text management and documentation in CAD drawings

### Text Types Legend ZYPTT

Legend of Text, Mtext and Rtext types selected from the Drawing.

A List is created on screen (in legend form) showing the various text types existing in the Drawing according to TextStyle, Color, size, Layer, etc. and explanations you have provided in a file using the ZYPTT1 or ZYPTT2 commands.

It usually serves cases where drawing texts are organized with different colors and Text Styles per category.

#### DRAWING on screen

Drawing view with different text types

#### EDITING FILE for ZYPTT1 or ZYPTT2 commands

Settings file for text explanations

#### Text Legend

Legend Settings

#### Notes:

The Layer, Tstyle and other elements written on the right in small letters can be deleted after the command completes and you want to prepare the Legend for printing.

These elements are presented to clarify the differences between text type categories.

#### Command Usage:

Besides inserting the Text Legend for printing, you can insert the Text Legend to identify even small differences in other elements of various categories (like size or color bylayer etc.) and correct the texts they belong to.

#### Tips:

When 2 or more categories appear identical and have identical other elements, then their differences are in the decimals of numbers for TextHeight, Width, Oblique or Rotation, and that's why they appear in the Legend.

If you have such a case, you should investigate why texts that you want with identical characteristics are drawn slightly differently from each other.

**The command name ZYPTT comes as an abbreviation of "z Υπόμνημα TexT" (Greek: "z Text Legend").

#### Text Selection

Select as many texts as you want from the Drawing. (ALL = select all texts)

After selection, texts will be analyzed and categories will emerge according to text type, size, Layer, color, rotation, etc.

See the General Command ' Layer Selection '

You have the ability to choose in what order the various text categories will appear in the Legend.

- TStyle: According to font type. (S)

- Layer: According to drawing Layers of categories. (L)

- Color: According to color. (C)

- THeight: According to character height. (H)

- TWidthFactor: According to character width factor. (W)

- TObliquing: According to character slant. (O)

- TRotation: According to text rotation angle.

Select the top-left point of the Text Legend to be created. After this selection, the Text Legend is drawn.

Inserting legend into drawing

#### Explanation configuration

Commands that open editing files: ZYPTT1 , ZYPTT2

In these files you can write the explanation for each text type.

Text types in explanations are separated according to Textstyle and text color.

### Selection - Configuration ZVFE

Opens a tab where you can view and edit the files that participate in various commands.

You can also select which file category each command will read when executed.

Command files configuration interface

### Editing - 1,2 ZYPTT1, 2

Select which of the 2 available files the ZYPTT command will read during execution to write the correct explanation text according to Text Style type.

By typing ZYPTT1 or ZYPTT2 you define which file the command will read (1 or 2) accordingly, and you can also edit it if you want.

During Text Legend insertion, the explanations you have registered in the files of this command are written in the Drawing.

You can do the same by running the above ZVFE command.

#### File creation / editing

If you run the command for the first time and no file exists yet, the above message appears.

First execution message

ZYPTT1: Creates and updates file //SDBOX/YPOMNHMA_TEXT1.dat

ZYPTT2: Creates and updates file //SDBOX/YPOMNHMA_TEXT2.dat

Each time you run one of the above commands, the corresponding .dat file is set as default and the ZYPTT command searches for explanations in it.

If you don't run either of the 2, then YPOMNHMA_TEXT1.dat is set as default.

File opening question

Esc or No: The command ends and file //SDBOX/YPOMNHMA_TEXT2.dat is set as the one that the ZYPTT command (Text Legend) will read.

Yes: Again the above file is set as default and the command continues by opening it for editing.

#### Adding explanations

Adding new explanations

If the explanation file is empty then it opens automatically for adding explanations.

Explanation file format

Each line of the explanation file is as follows:

```text
Text Style ? Color ? ...explanation text
```

e.g. For drawing texts that are on Layer "Dim_Dokon" and have TextStyle "Standard", have red color, you want the phrase "Beam Dimensioning" to be written as explanation in the Legend, then you must add the following line to the file:

```text
Standard ? 1 ? Beam Dimensioning
```

When you run the ZYPTT command and select such texts in the Text Legend, it will appear:

```text
(Layer: Dim_Dokon) Standard   A a …. Z Z  Beam Dimensioning

                               Tstyle: Standard  color: 7   Theight:1.0
```

Editing question for existing files

When files "YPOMNHMA_TEXT-1.DAT" or "YPOMNHMA_TEXT-2.DAT" already have written explanations for the Legend, then the command asks the above:

Yes: Opens the file and you add new explanations or corrections.

No: Does not open the file and only sets which file will be default and will be read by the ZYPTT command for Legend explanations.

#### Notes:

As mentioned above, when you reach the point where the explanation files are fully defined, then you use the ZYPTT1 and ZYPTT2 commands only to determine which file the ZYPTT command will read.

That is, when asked if you "want to open the file" by pressing No or Esc.

#### Command Usage:

Whenever you want to configure the explanation file or define which file the ZYPTT command will read for explanations.

#### Tips:

To create and configure the explanation files for the first times, it is recommended to export from a typical drawing for you the Textstyles with the ZTLIST command or detailed characteristics with ZTLS.

From the files that open with the above commands you can copy the TextStyles and Color to file "YPOMNHMA_TEXT-1.DAT" or "YPOMNHMA_TEXT-2.DAT".

### Text Types List ZTLIST

Opens a Notepad file containing a List with the names of TextStyles contained in the Drawing.

The file is always \\SDBOX\TSTYLES_LIST.dat and all Text Style Names that have been defined in the Drawing in the AutoCAD "Text Styles" tab are exported.

You can, among others, use this command to copy the Text Style names to the Explanation files and then complete the descriptions.

Text Styles List from drawing

### Detailed List ZTLS

Opens a file of your choice containing a detailed List (Name, Layer, Color, Height, etc.) of Texts (Text, Mtext, ArcText) that you select in the Drawing.

You select export file and number of texts from the Drawing which are analyzed, divided into categories and each category's elements (Text Style, Layer, Color, Height, etc.) are exported to the file.

Export file selection

Select file for exporting the elements of each category of texts you select in the Drawing.

Text selection from drawing

You have the ability to choose in what order the various text categories will be written to the file.

- TStyle: According to font type. (S)

- Layer: According to drawing Layers of categories. (L)

- Color: According to color. (C)

- THeight: According to character height. (H)

- TWidthFactor: According to character width factor. (W)

- TObliquing: According to character slant. (O)

- TRotation: According to text rotation angle. (R)

Detailed text list in table format

Once opened you can now manage it and make any changes, deletions, copies, etc.

#### Notes:

When you export text elements of the Drawing to MsWord (*.doc) or Excel (*.xls) files, the export files are in "Tab delimited text (txt)" format. If you want, after opening the file you can save it in normal doc or xls format.

#### Command Usage:

After exporting the Text elements to a txt file, you can copy the Text Styles and Color and paste them into the ZYPTT1 and ZYPTT2 command files, completing explanations for the Text Legend.

#### Tips:

When 2 or more categories appear identical and have identical other elements, then their differences are in the decimals of numbers for TextHeight, Width, Oblique or Rotation, and that's why they appear in the file.

If you have such a case, you should investigate why texts that you want with identical characteristics are drawn slightly differently from each other.

---

#### Article 58: sdbox: Edit Attributes

**Original:** https://www.sdtopocad.net/index.files/ZZATT_EN.htm

## Attribute Editing in Blocks

SDBox Design Software - Command guide for managing and editing attributes in CAD blocks

### Attribute Editing ZZATT

Editing content of Attributes in Blocks. Conversion to Uppercase or lowercase, adding phrases at the beginning or end, changing phrases, changes to Color, Layer or TextStyle.

The command is executed simultaneously on the desired Attributes of the selected Blocks.

Main attribute editing dialog interface

#### Note:

This command allows for batch editing of multiple attributes across different blocks simultaneously, saving significant time when managing large drawings with many similar blocks.

### Basic Text Conversion

Various text transformation options available in the command:

Basic text conversion options

#### Conversion Options:

- UPPERCASE: All alphabetic characters in phrases are converted to UPPERCASE (accents remain).

- lowercase: All alphabetic characters in phrases are converted to lowercase.

- diameter: The diameter symbol is added at the beginning of each phrase. (O)

- degrees: The degrees symbol is added at the end of each phrase. (°)

- overline: Each phrase is overlined. (adds %%o at the beginning)

- underline: Each phrase is underlined. (adds %%u at the beginning)

- +/-: The ± symbol is added at the beginning of each phrase. (%%p)

- %: The % symbol is added at the end of each phrase. (%%%)

#### Tip:

These conversion options can be combined with other modifications for comprehensive attribute management.

### Text Addition and Modification

Text addition options

#### Text Addition Options:

- Add text Left: Whatever phrase you type in the corresponding field is added at the beginning of each phrase.

- Add text Right: Whatever phrase you type in the corresponding field is added at the end of each phrase.

Example of text modification in attributes

#### Usage:

Use these options to add prefixes or suffixes to multiple attributes simultaneously, such as adding unit symbols or reference codes.

### Search and Replace

Search and replacement of individual words or phrases in the texts of Attributes you will select.

#### Key Features:

- Change characters within phrases: If you want to replace a word that appears anywhere in the text, including within longer phrases.

- Change only whole words: Replace only when the text consists exclusively of the word to be changed.

- Case sensitive: Uppercase and lowercase are treated as different.

Detailed search and replace interface

#### Search Field:

Enter the word or phrase you want to change. You can also enter Wild-card characters for complex searches.

#### Replace Field:

Enter the replacement word or phrase. If left empty, the words or phrases for change are removed from the texts.

#### Note:

Wild-card characters are not recommended in the replacement field because they are taken as normal letters during replacement.

### Text Properties

Text height adjustment options

Text Height: You can type a new height or use ">>" to select some text or Attribute on the drawing screen to record its height.

Color, style and layer modification options

#### Property Modification:

- Color: Select color for all Attributes that will be selected.

- Style: Select Text Style from existing ones in the Drawing for all Attributes that will be selected.

- Layer: Select Layer for all Attributes that will be selected.

Block and attribute selection type options

### Selection Options

#### Selection Methods:

- I will select Block type: After clicking OK on the tab, you will be asked to select a Block and then only Blocks with the same name as that will be selected.

- I will select Attribute type: After clicking OK on the tab, you will be asked to select an Attribute of a Block and then from whichever Blocks are selected, the command will be executed only on the Attribute of those Blocks that have the same name as the selected Attribute.

- All selection Blocks: After clicking OK on the tab, you will select whichever Blocks you want regardless of Block name or Attribute name.

#### Command Usage:

Mass corrections of Attributes, addition or removal of phrases in many Attributes simultaneously, and control of batch processing.

#### Tips:

The first few times you use the command, it is recommended to do simple examples to familiarize yourself with phrase editing in the complex search and replacement section.

Watch the tutorial video for a practical demonstration: ZZATT Tutorial on YouTube

---

<!-- SDBOX_EN_HTML_REFERENCE_END -->

---

## 28. Current Ribbon commands absent from the original English MNU

This section documents **55 additional CAD command identifiers** found in the English SDBOX customization file `sdbox_EN(20261015-012855).cuix` and not identified as typed command codes in the supplied original `SDBOX22_EN.MNU`. It supplements, rather than replaces, the older menu index (Sections 23–26) and the 58 HTML help articles (Section 27).

**Source and accuracy:** Command identifiers, original English labels, descriptions and Ribbon locations are taken from the CUIX `MenuGroup.cui` and `RibbonRoot.cui` data. A description is reproduced from its `HelpString` field, not from guessed behavior. Some actions have no HelpString; their function is indicated only by the Ribbon label. These entries confirm menu definitions, **not** that a command is installed or licensed in every CAD/version. The CUIX does not document every dialog prompt, input/output option, coordinate-system conversion or every supported attribute schema.

### Working with ESRI Shapefiles (.shp)

- **Import:** `ZSHPIN` (`=Maps= > Import-Export`) — imports a `.shp` file into CAD as drawing objects such as polylines and text.
- **Export:** `ZSHPOUT` (same panel) — exports selected drawing objects (lines, polylines, text, points, circles and blocks) to a Shapefile containing point, path or polygon geometries.
- **Examine source attributes:** `ZZSHPDATA` (same panel) — displays attribute data for a selected object imported from a Shapefile.

**What is not stated in the CUIX:** the exact dialogs; required companion files (for example `.dbf`/`.shx`); CRS and coordinate transformations; encoding; how fields are written on export; Z handling; and attribute retention rules. Confirm those directly in the installed command and the actual resulting files. Do not invent instructions for them.

### Maps — geospatial import and export

#### `ZJSONIN` — Import JSON ZJSONIN

**Original English CUIX description:** Import a *.json file into the drawing as objects (polylines, text, etc.)

**Ribbon location:** `=Maps= &gt; Import-Export`

**CUIX macro reference:** `MMU_231_B6C3B`

#### `ZKMLIN` — Import Kml, Kmz ZKMLIN

**Original English CUIX description:** Import a *.kml or kmz file into the drawing screen as objects (polylines, text, points, etc.) on relevant layers.

**Ribbon location:** `=Maps= &gt; Import-Export`

**CUIX macro reference:** `MMU_231_1DB54`

#### `ZSHPIN` — Import ShapeFle ZSHPIN

**Original English CUIX description:** Import a *.shp file into the drawing as objects (polylines, text, etc.)

**Ribbon location:** `=Maps= &gt; Import-Export`

**CUIX macro reference:** `MMU_231_3AAB2`

#### `ZSHPOUT` — Export ShapeFle ZSHPOUT

**Original English CUIX description:** Export Lines, Plines. Texts, Points, Circles, Blocks from the drawing to a ShapeFile with Points or Paths or Polygons.

**Ribbon location:** `=Maps= &gt; Import-Export`

**CUIX macro reference:** `MMU_231_00C1B`

#### `ZZSHPDATA` — SHP Attributes ZZSHPDATA

**Original English CUIX description:** Displays attribute data of the selected object imported from a Shapefile.

**Ribbon location:** `=Maps= &gt; Import-Export`

**CUIX macro reference:** `MMU_231_9530E`

### Maps — map backgrounds and georeferenced images

#### `ENZZLINKS` — Locate on Maps ENZZLINKS

**Original English CUIX description:** Locating points on maps and useful links for engineering work.

**Ribbon location:** `=Maps= &gt; zzlinks`

**CUIX macro reference:** `MMU_231_8F571`

#### `ZGEOMTIF` — Batch GeoTIFF Import ZGEOMTIF

**Original English CUIX description:** Bulk import of georeferenced GeoTIFF files such as cadastral maps, orthophotos, and survey rasters.

**Ribbon location:** `=Maps= &gt; GeoImage`

**CUIX macro reference:** `MMU_231_1F59D`

#### `ZXGEOFILE` — Export georeference ZXGEOFILE

**Original English CUIX description:** Select the image and a georeference file with the same name is automatically extracted.

**Ribbon location:** `=Maps= &gt; GeoImage`

**CUIX macro reference:** `MMU_231_EBFD7`

#### `ZZGEOTIF` — Insert a Geotiff ZZGEOTIF

**Original English CUIX description:** A GeoTIFF is basically a metadata TIFF format with the ability to embed geo-referencing information with the data of an image.

**Ribbon location:** `=Maps= &gt; GeoImage`

**CUIX macro reference:** `MMU_231_A84A1`

#### `ZZISTRV` — Navigate to Google Street View ZZISTRV

**Original English CUIX description:** Pick a point on the screen and the street-view image opens automatically.

**Ribbon location:** `=Maps= &gt; zzlinks`

**CUIX macro reference:** `MMU_231_4BB38`

#### `ZZMAPS` — Insert background Maps ZZMAPS

**Original English CUIX description:** Select map type and area range from the tab that opens and the map is inserted as a georeferenced image into the drawing.

**Ribbon location:** `=Maps= &gt; Background Maps`

**CUIX macro reference:** `MMU_231_884E4`

#### `ZZSETMAP` — Set map source ZZSETMAP

**Original English CUIX description:** Select a map that will be used as a source by the ZTMAP command that inserts the map on the screen. You can also use a ‘Custom Map’ with your own URL and/or API Key.

**Ribbon location:** `=Maps= &gt; Background Maps`

**CUIX macro reference:** `MMU_231_15E5A`

#### `ZZTMAP` — Insert Map tiles ZZTMAP

**Original English CUIX description:** Pick an area on the screen and the map tiles are automatically imported. The import layer is relative to the map source.

**Ribbon location:** `=Maps= &gt; Background Maps`

**CUIX macro reference:** `MMU_231_44925`

### SDBOX — surveying, terrain and deliverables

#### `DEACTIVATESDBOX` — Deacrtivate SDBOX

**Original English CUIX description:** Release the SDBOX license from this computer so it can be activated on another computer.

**Ribbon location:** `=SDBOX= &gt; 00 Start sdbox`

**CUIX macro reference:** `MMU_243_D60BF`

#### `ZDT3DPL` — Cross section 3D Polylines ZDT3DPL

**Original English CUIX description:** Set an imaginary cross section line in the plan view and the cross section line is automatically built with its intersections on the 3D Polyline.

**Ribbon location:** `=SDBOX= &gt; Contours`

**CUIX macro reference:** `MMU_231_8D546`

#### `ZDTMGRDN` — Gradient ZDTMGRDN

**Original English CUIX description:** A color gradient shading is applied to the selected triangles. You define the differentiation interval. A relevant legend is automatically inserted.

**Ribbon location:** `=SDBOX= &gt; Triangles`

**CUIX macro reference:** `MMU_231_AD000`

#### `ZLMRS` — Adjust by line selection ZLMRS

**Original English CUIX description:** Select already drawn lines from which pairs of points (start point - end point) are created and based on them an adjustment is made with average values.

**Ribbon location:** `=SDBOX= &gt; 16a Survey plan step by step`; `=Tools= &gt; 13 Modify`

**CUIX macro reference:** `MMU_231_86953`

#### `ZMRDS` — Previous ZMRS pairs ZMRDS

**Original English CUIX description:** Display the point pairs defined in the last use of the ZMRS command.

**Ribbon location:** `=SDBOX= &gt; 16a Survey plan step by step`; `=Tools= &gt; 13 Modify`

**CUIX macro reference:** `MMU_231_F83CE`

#### `ZSTBOX` — Set-out plan

**Original English CUIX description:** Guide and tools for drawing up a Set-out plan and implementing studies.

**Ribbon location:** `=SDBOX= &gt; 16a Survey plan step by step`

**CUIX macro reference:** `ID_ZSTBOX`

#### `ZTAXIS` — Draw Axis ZTAXIS

**Original English CUIX description:** A polyline as cross-sections Axis is added.

**Ribbon location:** `=SDBOX= &gt; Sections / Volume`

**CUIX macro reference:** `MMU_231_134C7`

#### `ZTDIAT` — Cross-sections on axis ZTDIAT

**Original English CUIX description:** Select the axis and set cross-section width and the cross-sections are automatically drawn perpendicular to the axis.

**Ribbon location:** `=SDBOX= &gt; Sections / Volume`

**CUIX macro reference:** `MMU_231_13E9A`

#### `ZTITLOILP` — Ownership declaration ZTITLOILP

**Original English CUIX description:** No HelpString is supplied; the name above is the only description available from this CUIX.

**Ribbon location:** `=SDBOX= &gt; 16a Survey plan step by step`

**CUIX macro reference:** `ID_ZTITLOIDD`

#### `ZTITLOIY` — Elevation documentation ZTITLOIY

**Original English CUIX description:** No HelpString is supplied; the name above is the only description available from this CUIX.

**Ribbon location:** `=SDBOX= &gt; 16a Survey plan step by step`

**CUIX macro reference:** `ID_ZTITLOIY`

#### `ZTTMLDIST` — Distance of cross-sections ZTTMLDIST

**Original English CUIX description:** Specify the distance between successive cross sections of the ZTTOMML2 command.

**Ribbon location:** `=SDBOX= &gt; Sections / Volume`

**CUIX macro reference:** `MMU_231_2F416`

#### `ZTTOM2` — Section between 2 terrains ZTTOM2

**Original English CUIX description:** Specify two points for the cross section line on triangles for two terrains (different layers) and then the cross section is drawn automatically.

**Ribbon location:** `=SDBOX= &gt; Sections / Volume`

**CUIX macro reference:** `MMU_231_A007A`

#### `ZTTOMML2` — Multiple sections between 2 terrains ZTTOMML2

**Original English CUIX description:** Select already drawn lines in the drawing and the cross sections on triangles for two terrains are drawn automatically.

**Ribbon location:** `=SDBOX= &gt; Sections / Volume`

**CUIX macro reference:** `MMU_231_1388B`

#### `ZXSURV` — Preview survey points ZXSURV

**Original English CUIX description:** An interactive table opens with all the survey points of the plan (nodes, stations, gps, reference points, reper, etc.).

**Ribbon location:** `=SDBOX= &gt; 16a Survey plan step by step`

**CUIX macro reference:** `MMU_231_EF8B9`

#### `ZZDEMOE` — DEM Contours (Auto) ZZDEMOE

**Original English CUIX description:** Creates a Digital Elevation Model (DEM/TIN) and contour lines by automatically downloading elevation data from online services for any area defined by two points.

**Ribbon location:** `=SDBOX= &gt; Contours`

**CUIX macro reference:** `MMU_231_93B0E`

#### `ZZDEMVGE` — DEM Contours (GPSVisualizer) ZZDEMVGE

**Original English CUIX description:** Creates a Digital Elevation Model and contour lines for a rectangular area using elevation data from global datasets (SRTM/ASTER, Google Earth–level resolution), processed via GPSVisualizer.

**Ribbon location:** `=SDBOX= &gt; Contours`

**CUIX macro reference:** `MMU_231_24B70`

#### `ZZKTH` — Chainage Blocks at Vertices ZZKTH

**Original English CUIX description:** Inserts chainage (stationing) blocks at Polyline vertices.

**Ribbon location:** `=SDBOX= &gt; 16a Survey plan step by step`

**CUIX macro reference:** `MMU_231_8381C`

#### `ZZLPDF` — Layer-Based PDF Plot ZZLPDF

**Original English CUIX description:** Automatically plots the drawing to PDF using the current layer name as the suggested output file name.

**Ribbon location:** `=SDBOX= &gt; 12 Misc`

**CUIX macro reference:** `MMU_231_9FF33`

#### `ZZPBMP` — Export Screen to BMP ZZPBMP

**Original English CUIX description:** Exports the current screen view to a BMP image file using the current layer name as the suggested file name.

**Ribbon location:** `=SDBOX= &gt; 12 Misc`

**CUIX macro reference:** `MMU_231_1A251`

#### `ZZPJPG` — Export Screen to JPEG ZZPJPG

**Original English CUIX description:** Exports the current screen view to a JPG image file using the current layer name as the suggested file name.

**Ribbon location:** `=SDBOX= &gt; 12 Misc`

**CUIX macro reference:** `MMU_231_EED31`

### Tools — drawing and editing

#### `00+` — Current Layer: 0+ 00+

**Original English CUIX description:** Sets layer '0' as current and turns off the previously current layer.

**Ribbon location:** `=Tools= &gt; 06 Layers`

**CUIX macro reference:** `MMU_231_49943`

#### `ERCTNGL` — Rectangle Area ERCTNGL

**Original English CUIX description:** Calculates and annotates the area of a rectangle by entering its two sides, including calculation documentation.

**Ribbon location:** `=Tools= &gt; 02 Operations and numbers`

**CUIX macro reference:** `MMU_231_9DD81`

#### `ETRIGHR` — Triangle Area ETRIGHR

**Original English CUIX description:** Calculates and annotates the area of a triangle by entering its three sides, including calculation documentation.

**Ribbon location:** `=Tools= &gt; 02 Operations and numbers`

**CUIX macro reference:** `MMU_231_AC84C`

#### `ETRPZ` — Trapezoid Area ETRPZ

**Original English CUIX description:** Calculates and annotates the area of a trapezoid by entering the two bases and the height, including calculation documentation.

**Ribbon location:** `=Tools= &gt; 02 Operations and numbers`

**CUIX macro reference:** `MMU_231_CF0F7`

#### `ZCMX` — Previous unique Pline points ZCMX

**Original English CUIX description:** The unique points found with the last use of the ZZCMPL command are shown with an "X" on the screen.

**Ribbon location:** `=Tools= &gt; 05 Lines`

**CUIX macro reference:** `MMU_231_CD0E5`

#### `ZLAYNAME` — Copy Layer name ZLAYNAME

**Original English CUIX description:** Pick an object on the screen and the layer name appears on the command line, from where you can copy it.

**Ribbon location:** `=Tools= &gt; 06 Layers`

**CUIX macro reference:** `MMU_231_4F01C`

#### `ZPMRESET` — Clear memory for ZPMX ZPMRESET

**Original English CUIX description:** The ZPMX command list that displays the vertices of polylines modified by the last uses of the ZPML command is cleared.

**Ribbon location:** `=Tools= &gt; 05 Lines`

**CUIX macro reference:** `MMU_231_65140`

#### `ZPMX` — Previous contact peaks ZPMX

**Original English CUIX description:** Points modified by the last uses of the ZZPML command are displayed with an "X" on the screen.

**Ribbon location:** `=Tools= &gt; 05 Lines`

**CUIX macro reference:** `MMU_231_59766`

#### `ZRENLAY` — Change Layer Name ZRENLAY

**Original English CUIX description:** Pick an object on the screen and enter a new name for the Layer it belongs to. The name, that has already, is been displayed on the command line and you can copy it and add e.g. prefix or suffix.

**Ribbon location:** `=Tools= &gt; 06 Layers`

**CUIX macro reference:** `MMU_231_306CE`

#### `ZTITLOIYPPLAISIO` — Legend Frame ZTITLOIYPPLAISIO

**Original English CUIX description:** Insert the frame for line, symbols and hatch legend.

**Ribbon location:** `=Tools= &gt; 18 Titles`

**CUIX macro reference:** `MMU_231_C720C`

#### `ZXRNFL` — Change Xref file ZXRNFL

**Original English CUIX description:** Pick an Xref on the design screen and then set the file it will read from here on out. No need to open the Xrefs tab.

**Ribbon location:** `=Tools= &gt; 03 Blocks`

**CUIX macro reference:** `MMU_231_34ACC`

#### `ZZCMPL` — Polyline matching check ZZCMPL

**Original English CUIX description:** Select as many Polylines as you want, where a check is made for their common points and their unique points are detected.

**Ribbon location:** `=Tools= &gt; 05 Lines`

**CUIX macro reference:** `MMU_231_1C206`

#### `ZZMT2T` — Convert MText to Text ZZMT2T

**Original English CUIX description:** Converts selected MText objects into single-line Text entities.

**Ribbon location:** `=Tools= &gt; 10 Text`

**CUIX macro reference:** `MMU_231_A225E`

#### `ZZP2SH` — Solid Hatch on Plines ZZP2SH

**Original English CUIX description:** Automatically creates solid hatches on selected closed polylines, on their respective layers, with optional filtering of fully enclosed internal hatches.

**Ribbon location:** `=Tools= &gt; 07 Hatch`

**CUIX macro reference:** `MMU_231_B24D1`

#### `ZZPL32` — Convert 3Dpolyline to 2D ZZPL32

**Original English CUIX description:** Selected 3D polylines are converted to 2D remaining on the same layer and colors. The original 3D polylines are deleted.

**Ribbon location:** `=Tools= &gt; 05 Lines`

**CUIX macro reference:** `MMU_231_71C74`

#### `ZZPLM` — Adaptation to touch points ZZPLM

**Original English CUIX description:** In a polyline set, you define the basic ones (which do not change) and from the rest, any vertices that are in close proximity are modified to match the vertices of the basic ones.

**Ribbon location:** `=Tools= &gt; 05 Lines`

**CUIX macro reference:** `MMU_231_ADA95`

#### `ZZSIMPL` — Simplify Polyline ZZSIMPL

**Original English CUIX description:** Reduces polyline vertices while preserving curvature and overall shape, with chord error control and DP, VW, or combined methods — ideal for cleaner CAD drawings, roads, and survey plans.

**Ribbon location:** `=Tools= &gt; 05 Lines`

**CUIX macro reference:** `MMU_231_4AD20`

### Other current CUIX commands (not placed on the Ribbon)

#### `222K` — Add designator initial on other layers

**Original English CUIX description:** No HelpString is supplied; the name above is the only description available from this CUIX.

**Location:** A CUIX macro definition was found, but no associated Ribbon button or toolbar placement was verified.

**CUIX macro reference:** `MMU_231_3D77C`

#### `ZAMEA` — Disability Accessibility Study

**Original English CUIX description:** Tools for drawing up a disabled person accessibility study in existing or new buildings.

**Location:** A CUIX macro definition was found, but no associated Ribbon button or toolbar placement was verified.

**CUIX macro reference:** `MMU_220_5A174`

#### `ZDKDD` — BUILDING PLAN ZDKDD

**Original English CUIX description:** Set Coverage and Floors areas, Hatch, surface documentation, automatic calculation and automatic memo update.

**Location:** A CUIX macro definition was found, but no associated Ribbon button or toolbar placement was verified.

**CUIX macro reference:** `MMU_220_152D5`

#### `ZPCBIMPR` — ZPCBIMPR

**Original English CUIX description:** The following actions will be performed for the PointCloud images: 1. set view to TOP, 2. set image directory, 3. set drawing units, 4. adjust image brightness, 5. rename the layer to the DWG name.

**Toolbar:** `PointCAB` (not listed in the present Ribbon panels).

**CUIX macro reference:** `MMU_243_0838D`

#### `ZPPBOX` — Compose a fire protection plan ZPPBOX

**Original English CUIX description:** No HelpString is supplied; the name above is the only description available from this CUIX.

**Location:** A CUIX macro definition was found, but no associated Ribbon button or toolbar placement was verified.

**CUIX macro reference:** `ID_ZPPBOX`

---

### Scope of this update

The comparison covers the supplied historical English MNU and the command macros in the supplied October 2026 English CUIX. It does not claim to identify commands implemented elsewhere without Ribbon/menu entries. Older commands continue to be covered by the previous manual sections, even if those commands are no longer present in a particular current toolbar.

